- 26 Feb, 2010 40 commits
-
-
Oliver Endriss authored
The I2C gate must also be disabled, if a tuner command failed. Otherwise the tuner mutex would be locked forever. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
When mclk is not 0 then it will never be set to the correct value and the Demodulator will not work. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
This gives the STV090x and improved clock signal (rectangle instead of sine). Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
Using clk_div member of stv6110x_config structure the tuner's clock output divider can be configured. It is set in stv6110x_attach. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
This is needed when clock input is driven from tuner and an output divider different from 1 is used. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
Before there was used a static register map that could lead to issues when there are are multiple adapters with the STV6110(A). Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
The function stv6110x_write_regs is used to write several registers at once. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
This could be useful for p.e. Common Interface applications where data rate is limited. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
With this change it is possible to have the same I2C address for both tuners. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
As the STV0900 features two demodulation paths in one chip there is some information used by both instances of the driver when used in dual mode. This information is now shared in an internal structure referenced by I2C adapter and address. Do initialisation of the demodulator only once when used in dual mode. Moved global mutex demod_lock to internal structure. Moved dev_ver and mclk to internal structure. Removed unused tuner_refclk from stv090x_state. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andreas Regel authored
In automatic S/S2 detection mode, locking of a DVB-S transponder could fail when coming from a DVB-S2 transponder. This change fixes the issue by first disabling DVB-S and DVB-S2 mode before enabling it again. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Abylay Ospan authored
22-kHz tone can be driven in two ways: 1. LNBH24 can produce 22kHz continuous tone when TEN=1 ( 22 KHz tone output is always activated ). 2. LNBH24 can reproduce 22kHz tone timings from DSQIN or EXTM pin's when TEN=0. From LNBH24 datasheet: "In order to improve design flexibility an external tone input pin is available (EXTM). The EXTM is a Logic input pin which activates the 22 kHz tone output, on the VoTX pin, by using the LNBH24 integrated tone generator (similar to the DSQIN pin function). In fact, the output tone waveform characteristics will always be internally controlled by the LNBH24 tone generator and the EXTM signal will be used as a timing control for DiSEqC tone data encoding on the VoTX output." In NetUP Dual DVB-S2-CI card 22kHz tone timings on EXTM pin produced by STV0900 demod: .set_tone = stv0900_set_tone redefine to "set_tone = lnbp21_set_tone" is not correct for "NetUP Dual DVB-S2-CI card". Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
The two sensors ov772x and ov965x have too much differences. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Peter Huewe authored
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of drivers/media/dvb/bt8xx/bt878.c Please have a look at the small patch and either pull it through your tree, or please ack' it so Jiri can pull it through the trivial tree. Patch against linux-next-tree, 22. Dez 08:38:18 CET 2009 but also present in linus tree. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Joe Perches authored
And a little code refactoring/neatening around the removals Reduces object size a little bit: new: $ size drivers/media/dvb/frontends/si21xx.o text data bss dec hex filename 8984 56 1816 10856 2a68 drivers/media/dvb/frontends/si21xx.o old: $ size drivers/media/dvb/frontends/si21xx.o text data bss dec hex filename 9084 56 1792 10932 2ab4 drivers/media/dvb/frontends/si21xx.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jiri Slaby authored
Stanse found a potential null dereference in cx18_dvb_start_feed and cx18_dvb_stop_feed. There is a check for stream being NULL, but it is dereferenced earlier. Move the dereference after the check. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Andy Walls <awalls@radix.net> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Alexander Beregalov authored
Free ir_dev before exit. Found by cppcheck. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jiri Slaby authored
Stanse found an unreachable statement in zl10039_attach. There is a `break' followed by `goto error'. Remove that break, so that it can handle the error. Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jiri Slaby authored
Stanse found a memory leak in tuner_probe. It is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jiri Slaby authored
Stanse found a memory leak in smscore_gpio_configure. buffer is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Roel Kluin authored
The return of saa7164_i2caddr_to_reglen() was not tested. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Francesco Lavra authored
this patch fixes a memory leak which occurs when an em28xx card with DVB extension is unplugged or its DVB extension driver is unloaded. In dvb_fini(), dev->dvb must be freed before being set to NULL, as is done in dvb_init() in case of error. Note that this bug is also present in the latest stable kernel release. Signed-off-by: Francesco Lavra <francescolavra@interfree.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
hartleys authored
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
hartleys authored
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Francesco Lavra authored
This patch fixes the declaration of the sysfs attributes for IR's, which must be a NULL-terminated array of struct attribute *. Without this patch, my machine crashes when inserting a DVB card. Signed-off-by: Francesco Lavra <francescolavra@interfree.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Dan Carpenter authored
I was initially concerned about the weird array index (the 2 bumps into the next row of the array). Matthias Schwarzott look at the datasheet and it turns out it should be zl10036_init_tab[1][0] |= 0x01; Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { <+... return NULL; ...+> } @@ expression *x; expression y; identifier r.f; statement S; @@ x = f(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Stefan Richter authored
If there is ever going to be a FireDTV or FloppyDTV firmware which does not provide a minimal ASCII textual descriptor for Model_Id --- or if the descriptor is provided indirectly in a descriptor directory --- the ieee1394 variant of the device probe of firedtv would dereference a NULL pointer. The firewire variant of firedtv's device probe is not affected. The fix makes sure that such an unexpected firmware is safely recognized by fdtv_alloc as an unknown firmware. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
It is not clear how to share the unlock in the case where the structure containing the lock has to be freed. So the unlock is now duplicated, with one copy moved before the free. The unlock label furthermore is no longer useful and is thus deleted. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e; identifier f; iterator I; statement S; @@ *kfree(x); ... when != &x when != x = e when != I(x,...) S *x->f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Alexey Dobriyan authored
Drop S_IRUGO, proc entry doesn't contain read hooks. Drop S_IFREG, simply unnecessary. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Dmitri Belimov authored
Add lost configuration for our TV card. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Roel Kluin authored
video_nr is unsigned so the test did not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Roel Kluin authored
Although these sizes may be the same it is better to calculate the size of the source, than the destiny. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-