1. 23 Nov, 2016 10 commits
    • Maya Erez's avatar
      wil6210: add support for power save enable / disable · 2c207eb8
      Maya Erez authored
      New power management wmi commands provide the ability to change
      the device power save profile (enable / disable power save).
      Signed-off-by: default avatarMaya Erez <qca_merez@qca.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      2c207eb8
    • Dedy Lansky's avatar
      wil6210: fix net queue stop/wake · f9e3033f
      Dedy Lansky authored
      Driver calls to netif_tx_stop_all_queues/netif_tx_wake_all_queues are
      inconsistent. In several cases, driver can get to a situation where net
      queues are stopped forever and data cannot be sent.
      
      The fix is to stop net queues if there is at least one vring which is
      "full" and to wake net queues if all vrings are not "full".
      Signed-off-by: default avatarDedy Lansky <qca_dlansky@qca.qualcomm.com>
      Signed-off-by: default avatarMaya Erez <qca_merez@qca.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      f9e3033f
    • Miaoqing Pan's avatar
      ath9k: fix NULL pointer dereference · 40bea976
      Miaoqing Pan authored
      relay_open() may return NULL, check the return value to avoid the crash.
      
      BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
      IP: [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common]
      PGD 41cf28067 PUD 41be92067 PMD 0
      Oops: 0000 [#1] SMP
      CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.6+ #35
      Hardware name: Hewlett-Packard h8-1080t/2A86, BIOS 6.15    07/04/2011
      task: ffffffff81e0c4c0 task.stack: ffffffff81e00000
      RIP: 0010:[<ffffffffa01a95c5>] [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common]
      RSP: 0018:ffff88041f203ca0 EFLAGS: 00010293
      RAX: 0000000000000000 RBX: 000000000000059f RCX: 0000000000000000
      RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffffffff81f0ca98
      RBP: ffff88041f203dc8 R08: ffffffffffffffff R09: 00000000000000ff
      R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
      R13: ffffffff81f0ca98 R14: 0000000000000000 R15: 0000000000000000
      FS:  0000000000000000(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 0000000000000040 CR3: 000000041b6ec000 CR4: 00000000000006f0
      Stack:
      0000000000000363 00000000000003f3 00000000000003f3 00000000000001f9
      000000000000049a 0000000001252c04 ffff88041f203e44 ffff880417b4bfd0
      0000000000000008 ffff88041785b9c0 0000000000000002 ffff88041613dc60
      
      Call Trace:
      <IRQ>
      [<ffffffffa01b6441>] ath9k_tasklet+0x1b1/0x220 [ath9k]
      [<ffffffff8105d8dd>] tasklet_action+0x4d/0xf0
      [<ffffffff8105dde2>] __do_softirq+0x92/0x2a0
      Reported-by: default avatarDevin Tuchsen <devin.tuchsen@gmail.com>
      Tested-by: default avatarDevin Tuchsen <devin.tuchsen@gmail.com>
      Signed-off-by: default avatarMiaoqing Pan <miaoqing@codeaurora.org>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      40bea976
    • Matthias Schiffer's avatar
      ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on success · 91851cc7
      Matthias Schiffer authored
      Commit b2d70d49 ("ath9k: make GPIO API to support both of WMAC and
      SOC") refactored ath9k_hw_gpio_get() to support both WMAC and SOC GPIOs,
      changing the return on success from 1 to BIT(gpio). This broke some callers
      like ath_is_rfkill_set(). This doesn't fix any known bug in mainline at the
      moment, but should be fixed anyway.
      
      Instead of fixing all callers, change ath9k_hw_gpio_get() back to only
      return 0 or 1.
      
      Fixes: b2d70d49 ("ath9k: make GPIO API to support both of WMAC and SOC")
      Cc: <stable@vger.kernel.org> # v4.7+
      Signed-off-by: default avatarMatthias Schiffer <mschiffer@universe-factory.net>
      [kvalo@qca.qualcomm.com: mention that doesn't fix any known bug]
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      91851cc7
    • Michal Kazior's avatar
      ath10k: add spectral scan support to wmi-tlv · 5a401f36
      Michal Kazior authored
      Command structure and event flow doesn't seem to
      be any different compared to existing
      implementation for other firmware branches.
      
      This patch effectively adds in-driver support for
      spectral scanning on QCA61x4 and QCA9377.
      
      Tested QCA9377 w/ WLAN.TF.1.0-00267-1.
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      5a401f36
    • Michal Kazior's avatar
      ath10k: fix null deref on wmi-tlv when trying spectral scan · 18ae68ff
      Michal Kazior authored
      WMI ops wrappers did not properly check for null
      function pointers for spectral scan. This caused
      null dereference crash with WMI-TLV based firmware
      which doesn't implement spectral scan.
      
      The crash could be triggered with:
      
        ip link set dev wlan0 up
        echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
      
      The crash looked like this:
      
        [  168.031989] BUG: unable to handle kernel NULL pointer dereference at           (null)
        [  168.037406] IP: [<          (null)>]           (null)
        [  168.040395] PGD cdd4067 PUD fa0f067 PMD 0
        [  168.043303] Oops: 0010 [#1] SMP
        [  168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211]
        [  168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G        W  O    4.8.0 #78
        [  168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
        [  168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000
        [  168.061736] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
        ...
        [  168.100620] Call Trace:
        [  168.101910]  [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core]
        [  168.104871]  [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0
        [  168.106696]  [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core]
        [  168.109618]  [<ffffffff812da3a1>] full_proxy_write+0x51/0x80
        [  168.111443]  [<ffffffff811957b8>] __vfs_write+0x28/0x120
        [  168.113090]  [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0
        [  168.114932]  [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60
        [  168.116680]  [<ffffffff811965f8>] vfs_write+0xb8/0x1a0
        [  168.118293]  [<ffffffff81197966>] SyS_write+0x46/0xa0
        [  168.119912]  [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4
        [  168.121737] Code:  Bad RIP value.
        [  168.123318] RIP  [<          (null)>]           (null)
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      18ae68ff
    • Pedersen, Thomas's avatar
      ath10k: remove set/get_tsf ieee80211_ops · f6f64cfb
      Pedersen, Thomas authored
      Neither of these did the right thing:
      
      - get_tsf just returned 0
      - set_tsf assumed a simple offset was applied against
        get_tsf(), which works, except in the case of
        calculating TSF from rx_mactime (actual TSF).
      
      Just remove them for now. We can reimplement set_tsf in
      terms of TSF increment/decrement in the future if get_tsf
      is ever supported by FW.
      Signed-off-by: default avatarThomas Pedersen <twp@qca.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      f6f64cfb
    • Pedersen, Thomas's avatar
      ath10k: implement offset_tsf ieee80211_op · 973324ff
      Pedersen, Thomas authored
      Current set_tsf is implemented in terms of TSF_INCREMENT
      only. Instead support new WMI command TSF_DECREMENT and
      export these through offset_tsf. Advantage is we get
      more accurate TSF adjustments, and don't calculate wrong
      offset in case absolute TSF was calculated from rx_mactime
      (actual TSF).
      
      The new WMI command is available in firmware
      10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new
      firmware or vice versa shouldn't  be a problem since
      get/set tsf logic was already broken.
      Signed-off-by: default avatarThomas Pedersen <twp@qca.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      973324ff
    • Rajkumar Manoharan's avatar
      ath10k: advertize hardware packet loss mechanism · ff32eeb8
      Rajkumar Manoharan authored
      Indicate hardware (or firmware) supports that CQM packet-loss report
      will be generated based on station kickout algorithm. As of now mac80211
      tracks connection loss by missing msdu counts (50) whereas ath10k
      firmware tracks them by missing ppdus (+ BAR tries). While firmware is
      trying to adapt its rate table, mac80211 might send out low_ack event to
      hostapd. This is causing frequent connect and disconnect iteration under
      noisy environment or when station is roaming around.
      Signed-off-by: default avatarRajkumar Manoharan <rmanohar@qti.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      ff32eeb8
    • Kalle Valo's avatar
      Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git · e644b88e
      Kalle Valo authored
      ath.git patches for 4.10. Major changes:
      
      ath9k
      
      * add device tree bindings
      * switch to use mac80211 intermediate software queues to reduce
        latency and fix bufferbloat
      e644b88e
  2. 19 Nov, 2016 15 commits
  3. 18 Nov, 2016 3 commits
  4. 17 Nov, 2016 12 commits