- 01 Oct, 2021 3 commits
-
-
Ranjani Sridharan authored
Today, we set up all widgets required for all PCM streams at the time of topology parsing even if they are not used. An optimization would be to only set up the widgets required for currently active PCM streams. This would give the FW the opportunity to power gate unused memory blocks, thereby saving power. For dynamic pipelines, the widgets in the connected DAPM path for each PCM will need to be set up at runtime. This patch introduces a new token, DYNAMIC_PIPELINE, for scheduler type widgets that indicate whether a pipeline should be set up statically during topology load or at runtime when the PCM is opened. Introduce a new field called dynamic_pipeline_widget in struct snd_sof_widget to save the value of the parsed token. The token is set only for the pipeline (scheduler type) widget and must be propagated to all widgets in the same pipeline during topology load. Introduce another field called pipe_widget in struct snd_sof_widget that saves the pointer to the scheduler widget with the same pipeline ID as that of the widget. This field is populated when the pipeline completion callback is invoked during topology loading. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-4-peter.ujfalusi@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Ranjani Sridharan authored
Add a new field to save the access setting for all controls in struct snd_sof_control. This will be used to ensure that only widgets belonging to static pipelines have volatile controls. Signed-off-by:
-
Ranjani Sridharan authored
In the SOF driver, the operations performed in the complete callback can fail and therefore topology loading should return an error in such cases. So, change the signature of the complete op in struct snd_soc_tplg_ops to return an int to return the error. Also, amend the complete callback functions in the SOF driver and the SKL driver to conform with the new signature. Signed-off-by:
-
- 30 Sep, 2021 8 commits
-
-
Jack Yu authored
The DAI clock is only used in I2S mode, to make it clear and to fix clock resource release issue, we move CCF clock related code to rt5682_i2c_probe to fix clock register/unregister issue. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210929054344.12112-1-jack.yu@realtek.comSigned-off-by:
-
Shengjiu Wang authored
On i.MX8ULP the audio interface and codec are controlled by Cortex-M domain, Cortex-M core provides audio service over rpmsg. The rpmsg audio function is almost same as i.MX7ULP platform, so share same configuration. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1632972413-22130-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Guo Zhengkui authored
Remove a repeated "#include <linux/firmware.h>" in line 32. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Acked-by:
Simon Trimmer <simont@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210929123217.5240-1-guozhengkui@vivo.comSigned-off-by:
-
Peter Ujfalusi authored
We have growing number of options under SND_SOC_SOF_TOPLEVEL as SOF adaptation is growing (Intel, NXP, AMD and Mediatek) and new features are added. It will make the menuconfig user experience much cleaner if we move the SOF options under a separate page. Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
-
Derek Fang authored
Fix the device-tree schema errors that be reported by using 'make dt_binding_check'. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20210929130406.24325-1-derek.fang@realtek.comSigned-off-by:
-
Derek Fang authored
Revise the macro RT5682S_PLLB_SRC_MASK to 0x1 because the mux is only two-source. Signed-off-by:
-
Derek Fang authored
It could observe the debug messages more clearly by using dev_dbg. Signed-off-by:
-
Derek Fang authored
This reg is for SW reset. It shouldn't have default value, so remove. Signed-off-by:
-
- 29 Sep, 2021 2 commits
-
-
Rikard Falkeborn authored
The struct mop500_ab8500_ops is only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210929094401.28086-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
These are only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
-
- 28 Sep, 2021 8 commits
-
-
Brent Lu authored
To follow 20-character length limitation of platform device name, we have only 7 character space for amplifier. Therefore, the last character of mx98357a and mx98360a is removed to save space. Signed-off-by:
Brent Lu <brent.lu@intel.com> Fixes: e224ef76 ('ASoC: intel: sof_rt5682: support jsl_rt5682s_mx98360a board') Acked-by:
-
Peter Ujfalusi authored
If we get an error on reply (msg->reply_error) then we should print the error value out. At the same time extend the print to include the message size as well and do the same in case of a timeout. Signed-off-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
-
Marc Herbert authored
These helped troubleshoot some DMA issue in SOF. Signed-off-by:
Marc Herbert <marc.herbert@intel.com> Reviewed-by:
-
Guennadi Liakhovetski authored
If an invalid stream is passed to snd_sof_ipc_msg_data() it won't fill the provided object with data. The caller has to be able to recognise such cases to avoid handling invalid data. Make the function return an error when failing. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@intel.com> Reviewed-by:
-
Trevor Wu authored
dp node and hdmi node are retrieved from of_parse_phandle(), so using of_node_put() on them before return. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210928063520.23927-1-trevor.wu@mediatek.comSigned-off-by:
-
Pierre-Louis Bossart authored
Sparse (make C=2) complains about undeclared variables. Fix by adding a real prototype instead of 'extern' in sof-of-dev.c Signed-off-by:
-
Ranjani Sridharan authored
There is no restore_stream flag anymmore. Signed-off-by:
-
Peter Ujfalusi authored
In order to provide more information in case of timeout observed while reading STREAM_SD_OFFSET, print out the stream name or in case there is no audio stream associated (like dma-trace), print "--" Signed-off-by:
-
- 27 Sep, 2021 19 commits
-
-
Mark Brown authored
Merge series "add driver to support firmware loading on Cirrus Logic DSPs" from Simon Trimmer <simont@opensource.cirrus.com>: This series of patches gradually separates the ASoC specific wm_adsp code from that required to manage firmware in Cirrus Logic DSPs. The series starts with renaming, progresses to splitting the functionality before finally moving the independent functionality into drivers/firmware so that it can be used by both the existing ASoC wm_adsp and new non-audio parts. Charles Keepax (3): ASoC: wm_adsp: Move check for control existence ASoC: wm_adsp: Switch to using wm_coeff_read_ctrl for compressed buffers ASoC: wm_adsp: Move sys_config_size to wm_adsp Simon Trimmer (13): ASoC: wm_adsp: Remove use of snd_ctl_elem_type_t ASoC: wm_adsp: Cancel ongoing work when removing controls ASoC: wm_adsp: Rename generic DSP support ASoC: wm_adsp: Introduce cs_dsp logging macros ASoC: wm_adsp: Separate some ASoC and generic functions ASoC: wm_adsp: Split DSP power operations into helper functions ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handling ASoC: wm_adsp: Move check of dsp->running to better place ASoC: wm_adsp: Pass firmware names as parameters when starting DSP core ASoC: wm_adsp: move firmware loading to client ASoC: wm_adsp: Split out struct cs_dsp from struct wm_adsp ASoC: wm_adsp: Separate wm_adsp specifics in cs_dsp_client_ops firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs MAINTAINERS | 11 + drivers/firmware/Kconfig | 1 + drivers/firmware/Makefile | 1 + drivers/firmware/cirrus/Kconfig | 5 + drivers/firmware/cirrus/Makefile | 3 + drivers/firmware/cirrus/cs_dsp.c | 3109 ++++++++++++++++ include/linux/firmware/cirrus/cs_dsp.h | 242 ++ .../linux/firmware/cirrus}/wmfw.h | 8 +- sound/soc/codecs/Kconfig | 1 + sound/soc/codecs/cs47l15.c | 22 +- sound/soc/codecs/cs47l24.c | 20 +- sound/soc/codecs/cs47l35.c | 24 +- sound/soc/codecs/cs47l85.c | 32 +- sound/soc/codecs/cs47l90.c | 34 +- sound/soc/codecs/cs47l92.c | 20 +- sound/soc/codecs/madera.c | 18 +- sound/soc/codecs/wm2200.c | 30 +- sound/soc/codecs/wm5102.c | 16 +- sound/soc/codecs/wm5110.c | 24 +- sound/soc/codecs/wm_adsp.c | 3188 ++--------------- sound/soc/codecs/wm_adsp.h | 105 +- 21 files changed, 3794 insertions(+), 3120 deletions(-) create mode 100644 drivers/firmware/cirrus/Kconfig create mode 100644 drivers/firmware/cirrus/Makefile create mode 100644 drivers/firmware/cirrus/cs_dsp.c create mode 100644 include/linux/firmware/cirrus/cs_dsp.h rename {sound/soc/codecs => include/linux/firmware/cirrus}/wmfw.h (91%) -- 2.33.0 -
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak4458 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak5558 driver to use more modern terminology for clocking. Signed-off-by:
-
Sugar Zhang authored
Currently, The fixed 512KB prealloc buffer size is too larger for tiny memory kernel (such as 16MB memory). This patch adds the module option "prealloc_buffer_size_kbytes" to specify prealloc buffer size. It's suitable for cards which use the generic dmaengine pcm driver with no config. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1632394246-59341-1-git-send-email-sugar.zhang@rock-chips.comSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the dwc-i2s driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak4671 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the alc5623 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of the effort to remove our old APIs based on outdated terminology update the Broadcom drivers to use modern terminology. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the cpcap driver to use more modern terminology for clocking. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210924231242.144692-1-colin.king@canonical.comSigned-off-by:
-
Geert Uytterhoeven authored
According to the WM8978 datasheet, the address of the device is fixed as 0011010 in 2-wire mode. Fixes: 5bd5699c ("ASoC: dt-bindings: Add WM8978 Binding") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c99fc865e3fca6ea623661c52de7dc6a3c36c8b4.1632487554.git.geert+renesas@glider.beSigned-off-by:
-
Colin Ian King authored
There are spelling mistakes in dev_err error messages. Fix them. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ad193x driver to use more modern terminology for clocking. Signed-off-by:
-
Rikard Falkeborn authored
The only usage of these is to assign their address to the ops field in the snd_soc_dai_driver struct, which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20210922205438.34519-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Stefan Binding authored
Some headsets require very different comparator thresholds for type detection, as well as longer settling times. In order to detect a larger number of headsets, use 2 thresholds to give maximum coverage (1.25V and 1.75V), as well as a longer settling time of 100ms. This will not affect default audotodetect mode and applies to manual mode type detection only. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210927111437.18113-1-vitalyr@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the adav80x driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the adau1977 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the adau17x1 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the adau1701 driver to use more modern terminology for clocking. Signed-off-by:
-
