- 17 Apr, 2019 12 commits
-
-
Magnus Karlsson authored
The full memory barrier in the XDP socket rings on the consumer side between the load of the data and the store of the consumer ring is there to protect the store from being executed before the load of the data. If this was allowed to happen, the producer might overwrite the data field with a new entry before the consumer got the chance to read it. On x86, stores are guaranteed not to be reordered with older loads, so it does not need a full memory barrier here. A compile time barrier would be enough. This patch introdcues a new primitive in libbpf_util.h that implements a new barrier type (libbpf_smp_rwmb) hindering stores to be reordered with older loads. It is then used in the XDP socket ring access code in libbpf to improve performance. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Magnus Karlsson authored
The use of smp_rmb() and smp_wmb() creates a Linux header dependency on barrier.h that is unnecessary in most parts. This patch implements the two small defines that are needed from barrier.h. As a bonus, the new implementations are faster than the default ones as they default to sfence and lfence for x86, while we only need a compiler barrier in our case. Just as it is when the same ring access code is compiled in the kernel. Fixes: 1cad0788 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Magnus Karlsson authored
This patch removes the use of likely and unlikely in xsk.h since they create a dependency on Linux headers as reported by several users. There have also been reports that the use of these decreases performance as the compiler puts the code on two different cache lines instead of on a single one. All in all, I think we are better off without them. Fixes: 1cad0788 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Magnus Karlsson authored
The ring buffer code of XDP sockets is missing a memory barrier on the consumer side between the load of the data and the write that signals that it is ok for the producer to put new data into the buffer. On architectures that does not guarantee that stores are not reordered with older loads, the producer might put data into the ring before the consumer had the chance to read it. As IA does guarantee this ordering, it would only need a compiler barrier here, but there are no primitives in barrier.h for this specific case (hinder writes to be ordered before older reads) so I had to add a smp_mb() here which will translate into a run-time synch operation on IA. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Magnus Karlsson authored
The ring buffer code of XDP sockets is missing a memory barrier on the consumer side between the load of the data and the write that signals that it is ok for the producer to put new data into the buffer. On architectures that does not guarantee that stores are not reordered with older loads, the producer might put data into the ring before the consumer had the chance to read it. As IA does guarantee this ordering, it would only need a compiler barrier here, but there are no primitives in Linux for this specific case (hinder writes to be ordered before older reads) so I had to add a smp_mb() here which will translate into a run-time synch operation on IA. Added a longish comment in the code explaining what each barrier in the ring implementation accomplishes and what would happen if we removed one of them. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Prashant Bhole authored
Let's print btf id of map similar to the way we are printing it for programs. Sample output: user@test# bpftool map -f 61: lpm_trie flags 0x1 key 20B value 8B max_entries 1 memlock 4096B 133: array name test_btf_id flags 0x0 key 4B value 4B max_entries 4 memlock 4096B pinned /sys/fs/bpf/test100 btf_id 174 170: array name test_btf_id flags 0x0 key 4B value 4B max_entries 4 memlock 4096B btf_id 240 Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Prashant Bhole authored
Let's move the final newline printing in show_map_close_plain() at the end of the function because it looks correct and consistent with prog.c. Also let's do related changes for the line which prints pinned file name. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Add support for recently added BPF_PROG_TYPE_CGROUP_SYSCTL program type and BPF_CGROUP_SYSCTL attach type. Example of bpftool output with sysctl program from selftests: # bpftool p load ./test_sysctl_prog.o /mnt/bpf/sysctl_prog type cgroup/sysctl # bpftool p l 9: cgroup_sysctl name sysctl_tcp_mem tag 0dd05f81a8d0d52e gpl loaded_at 2019-04-16T12:57:27-0700 uid 0 xlated 1008B jited 623B memlock 4096B # bpftool c a /mnt/cgroup2/bla sysctl id 9 # bpftool c t CgroupPath ID AttachType AttachFlags Name /mnt/cgroup2/bla 9 sysctl sysctl_tcp_mem # bpftool c d /mnt/cgroup2/bla sysctl id 9 # bpftool c t CgroupPath ID AttachType AttachFlags Name Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Using %ld for printing out value of ptrdiff_t type is not portable between 32-bit and 64-bit archs. This is causing compilation errors for libbpf on 32-bit platform (discovered as part of an effort to integrate libbpf into systemd ([0])). Proper formatter is %td, which is used in this patch. v2->v1: - add Reported-by - provide more context on how this issue was discovered [0] https://github.com/systemd/systemd/pull/12151Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Prashant Bhole authored
verifier.c uses BPF_CAST_CALL for casting bpf call except at one place in jit_subprogs(). Let's use the macro for consistency. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Viet Hoang Tran authored
The helper function bpf_sock_ops_cb_flags_set() can be used to both set and clear the sock_ops callback flags. However, its current behavior is not consistent. BPF program may clear a flag if more than one were set, or replace a flag with another one, but cannot clear all flags. This patch also updates the documentation to clarify the ability to clear flags of this helper function. Signed-off-by: Hoang Tran <hoang.tran@uclouvain.be> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Peter Oskolkov authored
This patch adds tests validating that VRF and BPF-LWT encap work together well, as requested by David Ahern. Signed-off-by: Peter Oskolkov <posk@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 16 Apr, 2019 16 commits
-
-
Alban Crequy authored
commit f1a2e44a ("bpf: add queue and stack maps") introduced new BPF helper functions: - BPF_FUNC_map_push_elem - BPF_FUNC_map_pop_elem - BPF_FUNC_map_peek_elem but they were made available only for network BPF programs. This patch makes them available for tracepoint, cgroup and lirc programs. Signed-off-by: Alban Crequy <alban@kinvolk.io> Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Rewrite selftest to iterate over an array with input packet and expected flow_keys. This should make it easier to extend this test with additional cases without too much boilerplate. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Add two tests to check that sequence of 1024 jumps is verifiable. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Benjamin Poirier authored
avoids outputting a series of value: No space left on device The value itself is not wrong but bpf_fd_reuseport_array_lookup_elem() can only return it if the map was created with value_size = 8. There's nothing bpftool can do about it. Instead of repeating this error for every key in the map, print an explanatory warning and a specialized error. example before: key: 00 00 00 00 value: No space left on device key: 01 00 00 00 value: No space left on device key: 02 00 00 00 value: No space left on device Found 0 elements example after: Warning: cannot read values from reuseport_sockarray map with value_size != 8 key: 00 00 00 00 value: <cannot read> key: 01 00 00 00 value: <cannot read> key: 02 00 00 00 value: <cannot read> Found 0 elements Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Benjamin Poirier authored
Commit bf598a8f ("bpftool: Improve handling of ENOENT on map dumps") used print_entry_plain() in case of ENOENT. However, that commit introduces dead code. Per-cpu maps are zero-filled. When reading them, it's all or nothing. There will never be a case where some cpus have an entry and others don't. The truth is that ENOENT is an error case. Use print_entry_error() to output the desired message. That function's "value" parameter is also renamed to indicate that we never use it for an actual map value. The output format is unchanged. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Quentin Monnet authored
Linux kernel now supports statistics for BPF programs, and bpftool is able to dump them. However, these statistics are not enabled by default, and administrators may not know how to access them. Add a paragraph in bpftool documentation, under the description of the "bpftool prog show" command, to explain that such statistics are available and that their collection is controlled via a dedicated sysctl knob. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Quentin Monnet authored
Manual pages would tell that option "-v" (lower case) would print the version number for bpftool. This is wrong: the short name of the option is "-V" (upper case). Fix the documentation accordingly. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Quentin Monnet authored
The "pinmaps" keyword is present in the man page, in the verbose description of the "bpftool prog load" command. However, it is missing from the summary of available commands at the beginning of the file. Add it there as well. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Quentin Monnet authored
When trying to dump the tree of all cgroups under a given root node, bpftool attempts to query programs of all available attach types. Some of those attach types do not support queries, therefore several of the calls are actually expected to fail. Those calls set errno to EINVAL, which has no consequence for dumping the rest of the tree. It does have consequences however if errno is inspected at a later time. For example, bpftool batch mode relies on errno to determine whether a command has succeeded, and whether it should carry on with the next command. Setting errno to EINVAL when everything worked as expected would therefore make such command fail: # echo 'cgroup tree \n net show' | \ bpftool batch file - To improve this, reset errno when its value is EINVAL after attempting to show programs for all existing attach types in do_show_tree_fn(). Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Quentin Monnet authored
Commit 569b0c77 ("tools/bpftool: show btf id in program information") made bpftool print an empty line after each program entry when listing the BPF programs loaded on the system (plain output). This is especially confusing when some programs have an associated BTF id, and others don't. Let's remove the blank line. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Willem de Bruijn authored
The ENCAP flags in bpf_skb_adjust_room are ignored on decap with bpf_skb_net_shrink. Reserve these bits for future use. Fixes: 868d5235 ("bpf: add bpf_skb_adjust_room encap flags") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alan Maguire authored
replace tab after #define with space in line with rest of definitions Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
It was removed in commit 166b5a7f ("selftests_bpf: extend test_tc_tunnel for UDP encap") without any explanation. Otherwise I see: progs/test_tc_tunnel.c:160:17: warning: taking address of packed member 'ip' of class or structure 'v4hdr' may result in an unaligned pointer value [-Waddress-of-packed-member] set_ipv4_csum(&h_outer.ip); ^~~~~~~~~~ 1 warning generated. Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Fixes: 166b5a7f ("selftests_bpf: extend test_tc_tunnel for UDP encap") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Andrii Nakryiko authored
Add test case verifying that dedup happens (INTs are deduped in this case) and VAR/DATASEC types are not deduped, but have their referenced type IDs adjusted correctly. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Yonghong Song <yhs@fb.com> Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Andrii Nakryiko authored
This patch adds support for VAR and DATASEC in btf_dedup(). VAR/DATASEC are never deduplicated, but they need to be processed anyway as types they refer to might need to be remapped due to deduplication and compaction. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Yonghong Song <yhs@fb.com> Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Andrii Nakryiko authored
When CONFIG_DEBUG_INFO_BTF is enabled but available version of pahole is too old to support BTF generation, build script is supposed to emit warning and proceed with the build. Due to using exit instead of return from BASH function, existing handling code prematurely exits exit code 0, not completing some of the build steps. This patch fixes issue by correctly returning just from gen_btf() function only. Fixes: e83b9f55 ("kbuild: add ability to generate BTF type info for vmlinux") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
- 13 Apr, 2019 4 commits
-
-
Jiong Wang authored
There are a few "regs[regno]" here are there across "check_reg_arg", this patch factor it out into a simple "reg" pointer. The intention is to simplify code indentation and make the later patches in this set look cleaner. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jiong Wang authored
After code refactor in previous patches, the propagation logic inside the for loop in "propagate_liveness" becomes clear that they are good enough to be factored out into a common function "propagate_liveness_reg". Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jiong Wang authored
Access to reg states were not factored out, the consequence is long code for dereferencing them which made the indentation not good for reading. This patch factor out these code so the core code in the loop could be easier to follow. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jiong Wang authored
Propagation for register and stack slot are finished in separate for loop, while they are perfect to be put into a single loop. This could also let them share some common variables in later patches. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 12 Apr, 2019 8 commits
-
-
Andrey Ignatov authored
Fix a new warning reported by kbuild for make ARCH=i386: In file included from kernel/bpf/cgroup.c:11:0: kernel/bpf/cgroup.c: In function '__cgroup_bpf_run_filter_sysctl': include/linux/kernel.h:827:29: warning: comparison of distinct pointer types lacks a cast (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^ include/linux/kernel.h:841:4: note: in expansion of macro '__typecheck' (__typecheck(x, y) && __no_side_effects(x, y)) ^~~~~~~~~~~ include/linux/kernel.h:851:24: note: in expansion of macro '__safe_cmp' __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ include/linux/kernel.h:860:19: note: in expansion of macro '__careful_cmp' #define min(x, y) __careful_cmp(x, y, <) ^~~~~~~~~~~~~ >> kernel/bpf/cgroup.c:837:17: note: in expansion of macro 'min' ctx.new_len = min(PAGE_SIZE, *pcount); ^~~ Fixes: 4e63acdf ("bpf: Introduce bpf_sysctl_{get,set}_new_value helpers") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
Andrey Ignatov says: ==================== v2->v3: - simplify C based selftests by relying on variable offset stack access. v1->v2: - add fs/proc/proc_sysctl.c mainteners to Cc:. The patch set introduces new BPF hook for sysctl. It adds new program type BPF_PROG_TYPE_CGROUP_SYSCTL and attach type BPF_CGROUP_SYSCTL. BPF_CGROUP_SYSCTL hook is placed before calling to sysctl's proc_handler so that accesses (read/write) to sysctl can be controlled for specific cgroup and either allowed or denied, or traced. The hook has access to sysctl name, current sysctl value and (on write only) to new sysctl value via corresponding helpers. New sysctl value can be overridden by program. Both name and values (current/new) are represented as strings same way they're visible in /proc/sys/. It is up to program to parse these strings. To help with parsing the most common kind of sysctl value, vector of integers, two new helpers are provided: bpf_strtol and bpf_strtoul with semantic similar to user space strtol(3) and strtoul(3). The hook also provides bpf_sysctl context with two fields: * @write indicates whether sysctl is being read (= 0) or written (= 1); * @file_pos is sysctl file position to read from or write to, can be overridden. The hook allows to make better isolation for containerized applications that are run as root so that one container can't change a sysctl and affect all other containers on a host, make changes to allowed sysctl in a safer way and simplify sysctl tracing for cgroups. Patch 1 is preliminary refactoring. Patch 2 adds new program and attach types. Patches 3-5 implement helpers to access sysctl name and value. Patch 6 adds file_pos field to bpf_sysctl context. Patch 7 updates UAPI in tools. Patches 8-9 add support for the new hook to libbpf and corresponding test. Patches 10-14 add selftests for the new hook. Patch 15 adds support for new arg types to verifier: pointer to integer. Patch 16 adds bpf_strto{l,ul} helpers to parse integers from sysctl value. Patch 17 updates UAPI in tools. Patch 18 updates bpf_helpers.h. Patch 19 adds selftests for pointer to integer in verifier. Patches 20-21 add selftests for bpf_strto{l,ul}, including integration C based test for sysctl value parsing. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul. Make sure that sysctl can be identified by name and that multiple integers can be parsed from sysctl value with bpf_strtoul. net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned longs, they all are parsed and compared (val[0] < val[1] < val[2]). Example of output: # ./test_sysctl ... Test case: C prog: deny all writes .. [PASS] Test case: C prog: deny access by name .. [PASS] Test case: C prog: read tcp_mem .. [PASS] Summary: 39 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Test that bpf_strtol and bpf_strtoul helpers can be used to convert provided buffer to long or unsigned long correspondingly and return both correct result and number of consumed bytes, or proper errno. Example of output: # ./test_sysctl .. Test case: bpf_strtoul one number string .. [PASS] Test case: bpf_strtoul multi number string .. [PASS] Test case: bpf_strtoul buf_len = 0, reject .. [PASS] Test case: bpf_strtoul supported base, ok .. [PASS] Test case: bpf_strtoul unsupported base, EINVAL .. [PASS] Test case: bpf_strtoul buf with spaces only, EINVAL .. [PASS] Test case: bpf_strtoul negative number, EINVAL .. [PASS] Test case: bpf_strtol negative number, ok .. [PASS] Test case: bpf_strtol hex number, ok .. [PASS] Test case: bpf_strtol max long .. [PASS] Test case: bpf_strtol overflow, ERANGE .. [PASS] Summary: 36 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Test that verifier handles new argument types properly, including uninitialized or partially initialized value, misaligned stack access, etc. Example of output: #456/p ARG_PTR_TO_LONG uninitialized OK #457/p ARG_PTR_TO_LONG half-uninitialized OK #458/p ARG_PTR_TO_LONG misaligned OK #459/p ARG_PTR_TO_LONG size < sizeof(long) OK #460/p ARG_PTR_TO_LONG initialized OK Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Add bpf_sysctl_* and bpf_strtoX helpers to bpf_helpers.h. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Sync bpf_strtoX related bpf UAPI changes to tools/. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Add bpf_strtol and bpf_strtoul to convert a string to long and unsigned long correspondingly. It's similar to user space strtol(3) and strtoul(3) with a few changes to the API: * instead of NUL-terminated C string the helpers expect buffer and buffer length; * resulting long or unsigned long is returned in a separate result-argument; * return value is used to indicate success or failure, on success number of consumed bytes is returned that can be used to identify position to read next if the buffer is expected to contain multiple integers; * instead of *base* argument, *flags* is used that provides base in 5 LSB, other bits are reserved for future use; * number of supported bases is limited. Documentation for the new helpers is provided in bpf.h UAPI. The helpers are made available to BPF_PROG_TYPE_CGROUP_SYSCTL programs to be able to convert string input to e.g. "ulongvec" output. E.g. "net/ipv4/tcp_mem" consists of three ulong integers. They can be parsed by calling to bpf_strtoul three times. Implementation notes: Implementation includes "../../lib/kstrtox.h" to reuse integer parsing functions. It's done exactly same way as fs/proc/base.c already does. Unfortunately existing kstrtoX function can't be used directly since they fail if any invalid character is present right after integer in the string. Existing simple_strtoX functions can't be used either since they're obsolete and don't handle overflow properly. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-