- 15 Nov, 2011 12 commits
-
-
Inki Dae authored
the purpose of this patch is to consider IOMMU support in the future. EXYNOS4 SoC supports IOMMU also so the address for DMA could be physical address with IOMMU or device address with IOMMU. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Inki Dae authored
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Inki Dae authored
this patch addes exynos_drm_gem_init() creating and initialzing a gem. allocation functions could use this function to create new gem and it changes size type of exynos_drm_gem_create structure to 64bit and also corrects comments to exynos_drm_gem_create structure. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Seung-Woo Kim authored
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Joonyoung Shim authored
crtc dpms is called as destroying attached fb so dpms off sould be processed. crtc dpms also can be called after crtc is detached from encoder so pipe value of manager is used to find display controller for this case Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Seung-Woo Kim authored
drm_framebuffer already has width and height so they are meaningless as parameters when updating fb_info. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Joonyoung Shim authored
during recreating exynos_drm_fbdev as a new display device probes, fb_helper is reinitialized but kernel fb is not changed so kernel_fb_list should be restored after fb_helper is reinitialized. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Inki Dae authored
exynos_drm_display has function pointes so exynos_drm_display_ops is better to describe. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Inki Dae authored
connector contains some contents for display controller so the connector also should be able to access controller through manager. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Seung-Woo Kim authored
missing members are added into converting function between timing and display mode and refresh rate of display mode is calculated by drm mode function. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Seung-Woo Kim authored
hdmi display in exynos supports hotplug event and interlace scan mode Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Seung-Woo Kim authored
this patch adds kms poll infrastructure to handle hotplug detection event Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
-
- 14 Nov, 2011 1 commit
-
-
Thomas Gleixner authored
commit 27641c3f (drm/vblank: Add support for precise vblank timestamping) adds preempt_disable()/enable() around a spin locked section with the comments: * Disable preemption, so vblank_time_lock is held as short as * possible, even under a kernel with PREEMPT_RT patches. /* Disable preemption while holding vblank_time_lock. Do * it explicitely to guard against PREEMPT_RT kernel. Just that this has never been tested on a RT kernel which would have granted that nonsense with a might_sleep() warning because dev->vblank_time_lock is converted to a "sleeping" spinlock on RT. So this is activly wrong on RT and superflous on mainline. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 12 Nov, 2011 1 commit
-
-
Alex Deucher authored
I missed the combios path when I updated the atombios pm code. Reported by amarsh04 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 11 Nov, 2011 21 commits
-
-
Alex Deucher authored
On newer chips the number of clock modes per power state varies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Avoid a lot of extra loops through the pm state array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
The new power tables need to be handled differently when setting up the profiles. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
It's already called via the DPMS functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Inki Dae authored
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Randy Dunlap authored
Fix kconfig unmet dependency warning. BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT, so select the latter along with the former. warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://git.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: Fix bandwidth calculation for DisplayPort drm/nouveau: by default use low bpp framebuffer on low memory cards drm/nv10: Change the BO size threshold determining the memory placement range. drm/nvc0: enable acceleration for nvc1 by default drm/nvc0/gr: fixup the mmio list register writes for 0xc1 drm/nvc1: hacky workaround to fix accel issues drm/nvc0/gr: fix some bugs in grctx generation drm/nvc0: enable acceleration on 0xc8 by default drm/nvc0/vram: skip disabled PBFB subunits drm/nv40/pm: fix issues on igp chipsets, which don't have memory drm/nouveau: testing the wrong variable drm/nvc0/vram: storage type 0xc3 is not compressed drm/nv50: fix stability issue on NV86. drm/nouveau: initialize chan->fence.lock before use drm/nv50/vram: fix incorrect detection of bank count on newer chipsets drm/nv50/gr: typo fix, how about we not reset fifo during graph init? drm/nv50/bios: fixup mpll programming from the init table parser drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify() drm: make sure drm_vblank_init() has been called before touching vbl_lock
-
Ilija Hadzic authored
during the review of the fix for locks problems in drm_wait_vblank, a couple of false concerns were raised about how the drm_vblank_get and drm_vblank_put are used in this function; it turned out that the code is correct and that it cannot be simplified add a few comments to explain non-obvious flows in the code, to prevent "false alarms" in the future v2: incorporate comments received from Daniel Vetter Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
radeon_benchmark_do_move() returns an int so "time" should be int too. Making it unsigned breaks the error handling. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Ilija Hadzic authored
drm_wait_vblank must be DRM_UNLOCKED because otherwise it will grab the drm_global_mutex and then go to sleep until the vblank event it is waiting for. That can wreck havoc in the windowing system because if one process issues this ioctl, it will block all other processes for the duration of all vblanks between the current and the one it is waiting for. In some cases it can block the entire windowing system. v2: incorporate comments received from Daniel Vetter and Michel Daenzer. v3/v4: after a lengty discussion with Daniel Vetter, it was concluded that the only thing not yet protected with locks and atomic ops is the write to dev->last_vblank_wait. It's only used in a debug file in proc, and the current code already employs no correct locking: the proc file only takes dev->struct_mutex, whereas drm_wait_vblank implicitly took the drm_global_mutex. Given all this, it's not worth bothering to try to fix the locks at this time. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Kyungmin Park authored
As Exynos DRM is merged at mainline. Also update the maintainer entry. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jesse Barnes authored
We restore the CRTC, encoder, and connector configurations, but if the mode set failed, the attached display may have been turned off, so we need to try set_config again to restore things to the way they were. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Can happen when there is no DP panel attached, confusing users. Make it debug only. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Paul Bolle authored
slow-work got killed in commit 181a51f6. This means that since v2.6.36 there is no Kconfig symbol SLOW_WORK. Apparently selecting that symbol is a nop. Drop that select. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Marcin Slusarz authored
Nouveau, when configured with debugfs, creates debugfs files for every channel, so structure holding list of files needs to be protected from simultaneous changes by multiple threads. Without this patch it's possible to hit kernel oops in drm_debugfs_remove_files just by running a couple of xterms with looped glxinfo. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This hunk seems to have gotten lost when I rebased the patch. Reported-by: Sylvain Bertrand <sylvain.bertrand@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Michel Dänzer authored
This was only the case if the GPU reset was triggered from the CS ioctl, otherwise other processes could happily enter the CS ioctl and wreak havoc during the GPU reset. This is a little complicated because the GPU reset can be triggered from the CS ioctl, in which case we're already holding the mutex, or from other call paths, in which case we need to lock the mutex. AFAICT the mutex API doesn't allow recursive locking or finding out the mutex owner, so we need to handle this with helper functions which allow recursive locking from the same process. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Vinson Lee authored
Fixes Coverity buffer not null terminated defect. Signed-off-by: Vinson Lee <vlee@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jakob Bornecrantz authored
Snooping code expects this to be the case. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jakob Bornecrantz authored
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jakob Bornecrantz authored
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 09 Nov, 2011 5 commits
-
-
Adam Jackson authored
Ported from the equivalent fix in drm-intel-next: http://cgit.freedesktop.org/~keithp/linux/commit/?h=drm-intel-next&id=cd9dde44f47501394b9f0715b6a36a92aa74c0d0Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Marcin Slusarz authored
Framebuffer's BPP is not that important but can waste significant part of memory on low-VRAM cards. Lower it to 8bpp on < 32MB cards and to 16bpp on 64MB cards. It can still be overridden by video= option. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Francisco Jerez authored
Fixes the framebuffer memory allocation failure seen on some low-memory cards, followed by X refusing to start. https://bugs.freedesktop.org/show_bug.cgi?id=42384Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-