In preparation for using this helper in kbuf.h as well, move it there and
turn it into a macro.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Committing the selected ring buffer is currently done in three different
spots, combine it into a helper and just call that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nr_iovs is capped at 1024, and mode only has a few low values. We can
safely make them u16, in preparation for adding a few more members.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Expose min_wait_usec in io_uring_getevents_arg, replacing the pad member
that is currently in there. The value is in usecs, which is explained in
the name as well.

Note that if min_wait_usec and a normal timeout is used in conjunction,
the normal timeout is still relative to the base time. For example, if
min_wait_usec is set to 100 and the normal timeout is 1000, the max
total time waited is still 1000. This also means that if the normal
timeout is shorter than min_wait_usec, then only the min_wait_usec will
take effect.

See previous commit for an explanation of how this works.

IORING_FEAT_MIN_TIMEOUT is added as a feature flag for this, as
applications doing submit_and_wait_timeout() style operations will
generally not see the -EINVAL from the wait side as they return the
number of IOs submitted. Only if no IOs are submitted will the -EINVAL
bubble back up to the application.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Waiting for events with io_uring has two knobs that can be set:

1) The number of events to wake for
2) The timeout associated with the event

Waiting will abort when either of those conditions are met, as expected.

This adds support for a third event, which is associated with the number
of events to wait for. Applications generally like to handle batches of
completions, and right now they'd set a number of events to wait for and
the timeout for that. If no events have been received but the timeout
triggers, control is returned to the application and it can wait again.
However, if the application doesn't have anything to do until events are
reaped, then it's possible to make this waiting more efficient.

For example, the application may have a latency time of 50 usecs and
wanting to handle a batch of 8 requests at the time. If it uses 50 usecs
as the timeout, then it'll be doing 20K context switches per second even
if nothing is happening.

This introduces the notion of min batch wait time. If the min batch wait
time expires, then we'll return to userspace if we have any events at all.
If none are available, the general wait time is applied. Any request
arriving after the min batch wait time will cause waiting to stop and
return control to the application.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for having two distinct timeouts and avoid waking the
task if we don't need to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for expanding how we handle waits, move the actual
schedule and schedule_timeout() handling into a helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Rather than need to pass in 2 or 3 separate arguments, add a struct
to encapsulate the timeout and sigset_t parts of waiting. In preparation
for adding another argument for waiting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a new registration opcode IORING_REGISTER_CLOCK, which allows the
user to select which clock id it wants to use with CQ waiting timeouts.
It only allows a subset of all posix clocks and currently supports
CLOCK_MONOTONIC and CLOCK_BOOTTIME.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/98f2bc8a3c36cdf8f0e6a275245e81e903459703.1723039801.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

In addition to current relative timeouts for the waiting loop, where the
timespec argument specifies the maximum time it can wait for, add
support for the absolute mode, with the value carrying a CLOCK_MONOTONIC
absolute time until which we should return control back to the user.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4d5b74d67ada882590b2e42aa3aa7117bbf6b55f.1723039801.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Remove io_napi_adjust_timeout() and move the adjustments out of the
common path into __io_napi_busy_loop(). Now the limit it's calculated
based on struct io_wait_queue::timeout, for which we query current time
another time. The overhead shouldn't be a problem, it's a polling path,
however that can be optimised later by additionally saving the delta
time value in io_cqring_wait().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e14686e245b3b42ff90a3c4d70895d48676206.1723039801.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

we don't need to set ->napi_prefer_busy_poll if we're not going to poll,
do the checks first and all polling preparation after.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2ad7ede8cc7905328fc62e8c3805fdb11635ae0b.1723039801.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We could just move these two and save some space, but in preparation
for adding another flag, turn them into flags first.

This saves 8 bytes in struct io_buffer_list, making it exactly half
a cacheline on 64-bit archs now rather than 40 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Just like what is being done on the recv side, if we only map a single
segment, then use ITER_UBUF for mapping it. That's more efficient than
using an ITER_IOVEC.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

req->buf_list is assigned higher up and is safe to use as we remain
within a locked region, as is the 'bl' variable itself from which it
was assigned. To improve readability, use 'bl' directly rather than
get it from the io_kiocb, if we need to increment the head directly
in the buffer selection path. This makes it readily apparent that
it's the same io_buffer_list being used.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

reverse the order of the element evaluation in an if statement.

for many users that are not using iopoll, the iopoll_list will always
evaluate to false after having made a memory access whereas to_submit is
very likely already loaded in a register.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/052ca60b5c49e7439e4b8bd33bfab4a09d36d3d6.1722374371.git.olivier@trillion01.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add support for checking and coalescing multi-hugepage-backed fixed
buffers. The coalescing optimizes both time and space consumption caused
by mapping and storing multi-hugepage fixed buffers.

A coalescable multi-hugepage buffer should fully cover its folios
(except potentially the first and last one), and these folios should
have the same size. These requirements are for easier processing later,
also we need same size'd chunks in io_import_fixed for fast iov_iter
adjust.
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240731090133.4106-3-cliang01.li@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Store the folio shift and folio mask into imu struct and use it in
iov_iter adjust, as we will have non PAGE_SIZE'd chunks if a
multi-hugepage buffer get coalesced.
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240731090133.4106-2-cliang01.li@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This info may be useful when attempting to debug a problem involving a
ring using the NAPI feature.

Here is an example of the output:
ip-172-31-39-89 /proc/772/fdinfo # cat 14
pos:	0
flags:	02000002
mnt_id:	16
ino:	10243
SqMask:	0xff
SqHead:	633
SqTail:	633
CachedSqHead:	633
CqMask:	0x3fff
CqHead:	430250
CqTail:	430250
CachedCqTail:	430250
SQEs:	0
CQEs:	0
SqThread:	885
SqThreadCpu:	0
SqTotalTime:	52793826
SqWorkTime:	3590465
UserFiles:	0
UserBufs:	0
PollList:
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=6, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=6, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
  op=10, task_works=0
CqOverflowList:
NAPI:	enabled
napi_busy_poll_to:	1
napi_prefer_busy_poll:	true
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bb184f8b62703ddd3e6e19eae7ab6c67b97e1e10.1722293317.git.olivier@trillion01.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull bcachefs fixes from Kent Overstreet:

 - assorted syzbot fixes

 - some upgrade fixes for old (pre 1.0) filesystems

 - fix for moving data off a device that was switched to durability=0
   after data had been written to it.

 - nocow deadlock fix

 - fix for new rebalance_work accounting

* tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs: (28 commits)
  bcachefs: Fix rebalance_work accounting
  bcachefs: Fix failure to flush moves before sleeping in copygc
  bcachefs: don't use rht_bucket() in btree_key_cache_scan()
  bcachefs: add missing inode_walker_exit()
  bcachefs: clear path->should_be_locked in bch2_btree_key_cache_drop()
  bcachefs: Fix double assignment in check_dirent_to_subvol()
  bcachefs: Fix refcounting in discard path
  bcachefs: Fix compat issue with old alloc_v4 keys
  bcachefs: Fix warning in bch2_fs_journal_stop()
  fs/super.c: improve get_tree() error message
  bcachefs: Fix missing validation in bch2_sb_journal_v2_validate()
  bcachefs: Fix replay_now_at() assert
  bcachefs: Fix locking in bch2_ioc_setlabel()
  bcachefs: fix failure to relock in btree_node_fill()
  bcachefs: fix failure to relock in bch2_btree_node_mem_alloc()
  bcachefs: unlock_long() before resort in journal replay
  bcachefs: fix missing bch2_err_str()
  bcachefs: fix time_stats_to_text()
  bcachefs: Fix bch2_bucket_gens_init()
  bcachefs: Fix bch2_trigger_alloc assert
  ...

Pull smb server fixes from Steve French:

 - query directory flex array fix

 - fix potential null ptr reference in open

 - fix error message in some open cases

 - two minor cleanups

* tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd:
  smb/server: update misguided comment of smb2_allocate_rsp_buf()
  smb/server: remove useless assignment of 'file_present' in smb2_open()
  smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
  smb/server: fix return value of smb2_open()
  ksmbd: the buffer of smb2 query dir response has at least 1 byte

Pull s390 fixes from Vasily Gorbik:

 - Fix KASLR base offset to account for symbol offsets in the vmlinux
   ELF file, preventing tool breakages like the drgn debugger

 - Fix potential memory corruption of physmem_info during kernel
   physical address randomization

 - Fix potential memory corruption due to overlap between the relocated
   lowcore and identity mapping by correctly reserving lowcore memory

 - Fix performance regression and avoid randomizing identity mapping
   base by default

 - Fix unnecessary delay of AP bus binding complete uevent to prevent
   startup lag in KVM guests using AP

* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
  s390/boot: Avoid possible physmem_info segment corruption
  s390/ap: Refine AP bus bindings complete processing
  s390/mm: Pin identity mapping base to zero
  s390/mm: Prevent lowcore vs identity mapping overlap

Pull SCSI fixes from James Bottomley:
 "The important core fix is another tweak to our discard discovery
  issues. The off by 512 in logical block count seems bad, but in fact
  the inline was only ever used in debug prints, which is why no-one
  noticed"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Do not attempt to configure discard unless LBPME is set
  scsi: MAINTAINERS: Add header files to SCSI SUBSYSTEM
  scsi: ufs: qcom: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 SoC
  scsi: ufs: core: Add a quirk for handling broken LSDBS field in controller capabilities register
  scsi: core: Fix the return value of scsi_logical_block_count()
  scsi: MAINTAINERS: Update HiSilicon SAS controller driver maintainer

rebalance_work was keying off of the presence of rebelance_opts in the
extent - but that was incorrect, we keep those around after rebalance
for indirect extents since the inode's options are not directly
available

Fixes: 20ac515a ("bcachefs: bch_acct_rebalance_work")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes an apparent deadlock - rebalance would get stuck trying to
take nocow locks because they weren't being released by copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull cgroup fixes from Tejun Heo:
 "Three patches addressing cpuset corner cases"

* tag 'cgroup-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Eliminate unncessary sched domains rebuilds in hotplug
  cgroup/cpuset: Clear effective_xcpus on cpus_allowed clearing only if cpus.exclusive not set
  cgroup/cpuset: fix panic caused by partcmd_update

Pull workqueue fixes from Tejun Heo:
 "Nothing too interesting. One patch to remove spurious warning and
  others to address static checker warnings"

* tag 'wq-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Correct declaration of cpu_pwq in struct workqueue_struct
  workqueue: Fix spruious data race in __flush_work()
  workqueue: Remove incorrect "WARN_ON_ONCE(!list_empty(&worker->entry));" from dying worker
  workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
  workqueue: doc: Fix function name, remove markers

Pull MIPS fixes from Thomas Bogendoerfer:

 - Set correct timer mode on Loongson64

 - Only request r4k clockevent interrupt on one CPU

* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
  MIPS: Loongson64: Set timer mode in cpu-probe

Pull arm64 kvm fixes from Catalin Marinas:

 - Don't drop references on LPIs that weren't visited by the vgic-debug
   iterator

 - Cure lock ordering issue when unregistering vgic redistributors

 - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
   pages

 - Treat SGI registers as UNDEFINED if a VM hasn't been configured for
   GICv3

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
  KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
  KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
  KVM: arm64: vgic-debug: Don't put unmarked LPIs

Pull NFS client fixes from Anna Schumaker:

 - Fix rpcrdma refcounting in xa_alloc

 - Fix rpcrdma usage of XA_FLAGS_ALLOC

 - Fix requesting FATTR4_WORD2_OPEN_ARGUMENTS

 - Fix attribute bitmap decoder to handle a 3rd word

 - Add reschedule points when returning delegations to avoid soft lockups

 - Fix clearing layout segments in layoutreturn

 - Avoid unnecessary rescanning of the per-server delegation list

* tag 'nfs-for-6.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Avoid unnecessary rescanning of the per-server delegation list
  NFSv4: Fix clearing of layout segments in layoutreturn
  NFSv4: Add missing rescheduling points in nfs_client_return_marked_delegations
  nfs: fix bitmap decoder to handle a 3rd word
  nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS
  rpcrdma: Trace connection registration and unregistration
  rpcrdma: Use XA_FLAGS_ALLOC instead of XA_FLAGS_ALLOC1
  rpcrdma: Device kref is over-incremented on error from xa_alloc

Pull smb client fixes from Steve French:

 - fix refcount leak (can cause rmmod fail)

 - fix byte range locking problem with cached reads

 - fix for mount failure if reparse point unrecognized

 - minor typo

* tag 'v6.11-rc4-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb/client: fix typo: GlobalMid_Sem -> GlobalMid_Lock
  smb: client: ignore unhandled reparse tags
  smb3: fix problem unloading module due to leaked refcount on shutdown
  smb3: fix broken cached reads when posix locks

Pull input fixes from Dmitry Torokhov:

 - a tweak to uinput interface to reject requests with abnormally large
   number of slots. 100 slots/contacts should be enough for real devices

 - support for FocalTech FT8201 added to the edt-ft5x06 driver

 - tweaks to i8042 to handle more devices that have issue with its
   emulation

 - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
   840 G2

 - other minor fixes

* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: himax_hx83112b - fix incorrect size when reading product ID
  Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
  Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
  Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
  Input: uinput - reject requests with unreasonable number of slots
  Input: edt-ft5x06 - add support for FocalTech FT8201
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
  Input: adc-joystick - fix optional value handling
  Input: synaptics - enable SMBus for HP Elitebook 840 G2
  Input: ads7846 - ratelimit the spi_sync error message

Pull drm fixes from Dave Airlie:
 "Weekly fixes. xe and msm are the major groups, with
  amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw
  workaround fixes that were found to be missing, so that is why there
  are a bunch of scattered fixes, and one larger one. But overall size
  doesn't look too out of the ordinary.

  msm:
   - virtual plane fixes:
      - drop yuv on hw where not supported
      - csc vs yuv format fix
      - rotation fix
   - fix fb cleanup on close
   - reset phy before link training
   - fix visual corruption at 4K
   - fix NULL ptr crash on hotplug
   - simplify debug macros
   - sc7180 fix
   - adreno firmware name error path fix

  amdgpu:
   - GFX10 firmware loading fix
   - SDMA 5.2 fix
   - Debugfs parameter validation fix
   - eGPU hotplug fix

  i915:
   - fix HDCP timeouts

  nouveau:
   - fix SG_DEBUG crash

  xe:
   - Fix OA format masks which were breaking build with gcc-5
   - Fix opregion leak (Lucas)
   - Fix OA sysfs entry (Ashutosh)
   - Fix VM dma-resv lock (Brost)
   - Fix tile fini sequence (Brost)
   - Prevent UAF around preempt fence (Auld)
   - Fix DGFX display suspend/resume (Maarten)
   - Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
   - Fix devm/drmm issues (Daniele)
   - Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
   - Drop HW fence pointer to HW fence ctx (Brost)
   - Free job before xe_exec_queue_put (Brost)"

* tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
  drm/xe: Free job before xe_exec_queue_put
  drm/xe: Drop HW fence pointer to HW fence ctx
  drm/xe: Fix missing workqueue destroy in xe_gt_pagefault
  drm/amdgpu: fix eGPU hotplug regression
  drm/amdgpu: Validate TA binary size
  drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1
  drm/amdgpu: fixing rlc firmware loading failure issue
  drm/xe/uc: Use devm to register cleanup that includes exec_queues
  drm/xe: use devm instead of drmm for managed bo
  drm/xe/xe2hpg: Add Wa_14021821874
  drm/xe: fix WA 14018094691
  drm/xe/xe2: Add Wa_15015404425
  drm/xe/xe2: Make subsequent L2 flush sequential
  drm/xe/xe2lpg: Extend workaround 14021402888
  drm/xe/xe2lpm: Extend Wa_16021639441
  drm/xe/bmg: implement Wa_16023588340
  drm/xe/oa/uapi: Make bit masks unsigned
  drm/xe/display: Make display suspend/resume work on discrete
  drm/xe: prevent UAF around preempt fence
  drm/xe: Fix tile fini sequence
  ...

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith
     - Remove unused struct field (Nilay)
     - Fix fabrics keep-alive teardown order (Ming)

 - Write zeroes fixes (John)

* tag 'block-6.11-20240823' of git://git.kernel.dk/linux:
  nvme: Remove unused field
  nvme: move stopping keep-alive into nvme_uninit_ctrl()
  block: Drop NULL check in bdev_write_zeroes_sectors()
  block: Read max write zeroes once for __blkdev_issue_write_zeroes()

Pull io_uring fix from Jens Axboe:
 "Just a single fix for provided buffer validation"

* tag 'io_uring-6.11-20240823' of git://git.kernel.dk/linux:
  io_uring/kbuf: sanitize peek buffer setup

Pull ACPI fix from Rafael Wysocki:
 "Fix backlight control on a Dell All In One system where a backlight
  controller board is attached to a UART port and the dell-uart
  backlight driver binds to it, but the backlight is actually controlled
  by other means (Hans de Goede)"

* tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
  ACPI: video: Add Dell UART backlight controller detection

Pull thermal control fixes from Rafael Wysocki:
 "These fix error handling in the thermal debug code and OF node
  reference leaks in the thermal OF driver.

  Specifics:

   - Use IS_ERR() in checks of debugfs_create_dir() return value instead
     of checking it against NULL in the thermal debug code (Yang Ruibin)

   - Fix three OF node reference leaks in thermal_of (Krzysztof
     Kozlowski)"

* tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: of: Fix OF node leak in of_thermal_zone_find() error paths
  thermal: of: Fix OF node leak in thermal_of_zone_register()
  thermal: of: Fix OF node leak in thermal_of_trips_init() error path
  thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()

Pull mmc fixes from Ulf Hansson:
 "MMC core:
   - Fix NULL dereference for mmc_test on allocation failure

  MMC host:
   - dw_mmc: Fix support for deferred probe for biu/ciu clocks
   - mtk-sd: Fix CMD8 support when fragile tuning settings"

* tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmc_test: Fix NULL dereference on allocation failure
  mmc: dw_mmc: allow biu and ciu clocks to defer
  mmc: mtk-sd: receive cmd8 data when hs400 tuning fail

Pull spi fixes from Mark Brown:
 "A small collection of fixes here, all driver specific and none of them
  too serious. For whatever reason runtime PM seems to have been causing
  a bunch of issues recently"

* tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Move PM runtime handling to the glue drivers
  spi: pxa2xx: Do not override dev->platform_data on probe
  spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register
  spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume
  spi: zynqmp-gqspi: Scale timeout by data size