- 15 May, 2020 18 commits
-
-
Zhou Wang authored
Currently zip sqe is stored in hisi_zip_qp_ctx, which will bring corruption with multiple parallel users of the crypto tfm. This patch removes the zip_sqe in hisi_zip_qp_ctx and uses a temporary sqe instead. Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Shukun Tan <tanshukun1@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Shukun Tan authored
By configuring the device error in firmware to report through abnormal interruption, process all NFE errors in irq handler. Signed-off-by:
-
Shukun Tan authored
The hardware device can be configured to report directly through MSI, but this method will not go through RAS, configure all hardware errors that should be processed by driver to NFE. Signed-off-by:
-
Weili Qian authored
Put all the code for the memory allocation into the QM initialization process. Before, The qp memory was allocated when the qp was created, and released when the qp was released, It is now changed to allocate all the qp memory once. Signed-off-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
Weili Qian authored
Some initial value assignment of struct hisi_qm could put into QM. Signed-off-by:
-
Shukun Tan authored
The codes related use_dma_api is useless which should be removed. Signed-off-by:
-
Shukun Tan authored
Add callback reset_prepare and reset_done in QM, The callback reset_prepare will uninit device error configuration and stop the QM, the callback reset_done will init the device error configuration and restart the QM. Uninit the error configuration will disable device block master OOO when Multi-bit ECC error occurs to avoid the request of FLR will not return. Signed-off-by:
-
Zhou Wang authored
Add specific states for qm and qp, every state change under critical region to prevent from race condition. Meanwhile, qp state change will also depend on qm state. Due to the introduction of these states, it is necessary to pay attention to the calls of public logic, such as concurrent scenarios resetting and releasing queue will call hisi_qm_stop, which needs to add additional status to distinguish and process. Signed-off-by:
-
Shukun Tan authored
put q_num_set similar code into qm to reduce the redundancy. Signed-off-by:
-
Longfang Liu authored
Misc fixes on coding style: 1.Merge QM initialization code into a function 2.Merge QM's PF and VF initialization into a function Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Signed-off-by:
Zaibo Xu <xuzaibo@huawei.com> Signed-off-by:
-
Longfang Liu authored
Misc fixes on coding style: 1.Merge pre-initialization and initialization of QM 2.Package the initialization of QM's PF and VF into a function Signed-off-by:
-
Longfang Liu authored
Adjust the position of SMMU status check and SEC queue initialization in SEC probe Signed-off-by:
-
Rikard Falkeborn authored
sec_dfx_regs is never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 17982 7312 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o After: text data bss dec hex filename 18366 6928 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Rikard Falkeborn authored
hzip_dfx_regs is never changed and can be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 15236 6160 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o After: text data bss dec hex filename 15620 5776 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o Signed-off-by:
-
Rikard Falkeborn authored
hpre_cluster_dfx_regs and hpre_com_dfx_regs are never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 16455 6288 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o After: text data bss dec hex filename 16839 5904 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o Signed-off-by:
-
Rikard Falkeborn authored
pid_cd_regs and debug_regs are never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 2871 2320 64 5255 1487 drivers/crypto/ccree/cc_debugfs.o After: text data bss dec hex filename 3255 1936 64 5255 1487 drivers/crypto/ccree/cc_debugfs.o Signed-off-by:
-
Arnd Bergmann authored
When building for ARMv7-M, clang-9 or higher tries to unroll some loops, which ends up confusing the register allocator to the point of generating rather bad code and using more than the warning limit for stack frames: warning: stack frame size of 1200 bytes in function 'blake2b_compress' [-Wframe-larger-than=] Forcing it to not unroll the final loop avoids this problem. Fixes: 91d68933 ("crypto: blake2b - add blake2b generic implementation") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Herbert Xu authored
This reverts commit 85fc78b8 as a different fix has already been applied in the sound-asoc tree and this patch is no longer required. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
- 08 May, 2020 22 commits
-
-
Eric Biggers authored
<linux/cryptohash.h> sounds very generic and important, like it's the header to include if you're doing cryptographic hashing in the kernel. But actually it only includes the library implementation of the SHA-1 compression function (not even the full SHA-1). This should basically never be used anymore; SHA-1 is no longer considered secure, and there are much better ways to do cryptographic hashing in the kernel. Remove this header and fold it into <crypto/sha.h> which already contains constants and functions for SHA-1 (along with SHA-2). Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
<linux/cryptohash.h> sounds very generic and important, like it's the header to include if you're doing cryptographic hashing in the kernel. But actually it only includes the library implementation of the SHA-1 compression function (not even the full SHA-1). This should basically never be used anymore; SHA-1 is no longer considered secure, and there are much better ways to do cryptographic hashing in the kernel. Most files that include this header don't actually need it. So in preparation for removing it, remove all these unneeded includes of it. Signed-off-by:
-
Eric Biggers authored
The library implementation of the SHA-1 compression function is confusingly called just "sha_transform()". Alongside it are some "SHA_" constants and "sha_init()". Presumably these are left over from a time when SHA just meant SHA-1. But now there are also SHA-2 and SHA-3, and moreover SHA-1 is now considered insecure and thus shouldn't be used. Therefore, rename these functions and constants to make it very clear that they are for SHA-1. Also add a comment to make it clear that these shouldn't be used. For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that it matches the same definition in <crypto/sha.h>. This prepares for merging <linux/cryptohash.h> into <crypto/sha.h>. Signed-off-by:
-
Eric Biggers authored
Prefix the s390 SHA-1 functions with "s390_sha1_" rather than "sha1_". This allows us to rename the library function sha_init() to sha1_init() without causing a naming collision. Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
Prefix the PowerPC SHA-1 functions with "powerpc_sha1_" rather than "sha1_". This allows us to rename the library function sha_init() to sha1_init() without causing a naming collision. Cc: linuxppc-dev@lists.ozlabs.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Eric Biggers authored
The PowerPC implementation of SHA-1 doesn't actually use the 16-word temporary array that's passed to the assembly code. This was probably meant to correspond to the 'W' array that lib/sha1.c uses. However, in sha1-powerpc-asm.S these values are actually stored in GPRs 16-31. Referencing SHA_WORKSPACE_WORDS from this code also isn't appropriate, since it's an implementation detail of lib/sha1.c. Therefore, just remove this unneeded array. Tested with: export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig cat >> .config << EOF # CONFIG_MODULES is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_SHA1_PPC=y EOF make olddefconfig make -j32 qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \ -kernel arch/powerpc/boot/zImage \ -append "cryptomgr.fuzz_iterations=1000 cryptomgr.panic_on_fail=1" Cc: linuxppc-dev@lists.ozlabs.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Eric Biggers authored
In preparation for naming the SHA-1 stuff in <linux/cryptohash.h> properly and moving it to a more appropriate header, fix the HMAC-SHA256 code in mptcp_crypto_hmac_sha() to use SHA256_BLOCK_SIZE instead of "SHA_MESSAGE_BYTES" which is actually the SHA-1 block size. (Fortunately these are both 64 bytes, so this wasn't a "real" bug...) Cc: Paolo Abeni <pabeni@redhat.com> Cc: mptcp@lists.01.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: keyrings@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: linux-sctp@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: linux-bluetooth@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: linux-mtd@lists.infradead.org Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: linux-nfs@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: ecryptfs@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Kamil Konieczny <k.konieczny@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by:
-
Eric Biggers authored
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
