- 28 Sep, 2006 1 commit
-
-
Dave Jones authored
Signed-off-by:Dave Jones <davej@redhat.com>
-
- 27 Sep, 2006 1 commit
-
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
- 26 Sep, 2006 38 commits
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits) [PATCH] Don't set calgary iommu as default y [PATCH] i386/x86-64: New Intel feature flags [PATCH] x86: Add a cumulative thermal throttle event counter. [PATCH] i386: Make the jiffies compares use the 64bit safe macros. [PATCH] x86: Refactor thermal throttle processing [PATCH] Add 64bit jiffies compares (for use with get_jiffies_64) [PATCH] Fix unwinder warning in traps.c [PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1 [PATCH] x86: Move direct PCI scanning functions out of line [PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI [PATCH] Don't leak NT bit into next task [PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder [PATCH] Fix some broken white space in ia32_signal.c [PATCH] Initialize argument registers for 32bit signal handlers. [PATCH] Remove all traces of signal number conversion [PATCH] Don't synchronize time reading on single core AMD systems [PATCH] Remove outdated comment in x86-64 mmconfig code [PATCH] Use string instructions for Core2 copy/clear [PATCH] x86: - restore i8259A eoi status on resume [PATCH] i386: Split multi-line printk in oops output. ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits) Driver core: Don't call put methods while holding a spinlock Driver core: Remove unneeded routines from driver core Driver core: Fix potential deadlock in driver core PCI: enable driver multi-threaded probe Driver Core: add ability for drivers to do a threaded probe sysfs: add proper sysfs_init() prototype drivers/base: check errors drivers/base: Platform notify needs to occur before drivers attach to the device v4l-dev2: handle __must_check add CONFIG_ENABLE_MUST_CHECK add __must_check to device management code Driver core: fixed add_bind_files() definition Driver core: fix comments in drivers/base/power/resume.c sysfs_remove_bin_file: no return value, dump_stack on error kobject: must_check fixes Driver core: add ability for devices to create and remove bin files Class: add support for class interfaces for devices Driver core: create devices/virtual/ tree Driver core: add device_rename function Driver core: add ability for classes to handle devices properly ...
-
Heiko Carstens authored
Convert cmm's usage of kernel_thread to kthread_run. Also create the cmmthread at module load time, so it is possible to check if creation of the thread fails. In addition the cmmthread now gets terminated when the module gets unloaded instead of leaving a stale kernel thread. Also check the return values of other registration functions at module load and handle their return values appropriately. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Include the host architecture's ptrace-abi.h instead of ptrace.h. There was some cpp mangling of names around the ptrace.h include to avoid symbol clashes between UML and the host architecture. Most of these can go away. The exception is struct pt_regs, which is convenient to have in userspace, but must be renamed in order that UML can define its own. ptrace-x86_64.h needed to have some now-obsolete cpp cruft and a declaration removed. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Jeff Dike authored
The use of SEGMENT_RPL_MASK in the i386 ptrace.h introduced by x86-allow-a-kernel-to-not-be-in-ring-0.patch broke the UML build, as UML includes the underlying architecture's ptrace.h, but has no easy access to the x86 segment definitions. Rather than kludging around this, as in the past, this patch splits the userspace-usable parts, which are the bits that UML needs, of ptrace.h into ptrace-abi.h, which is included back into ptrace.h. Thus, there is no net effect on i386. As a side-effect, this creates a ptrace header which is close to being usable in /usr/include. x86_64 is also treated in this way for consistency. There was some trailing whitespace there, which is cleaned up. Signed-off-by:
-
Alan Cox authored
Ensure current->signal->tty doesn't get freed during log_exec(). Signed-off-by:
-
Jeff Dike authored
The KSTK_* macros used an inordinate amount of stack. In order to overcome an impedance mismatch between their interface, which just returns a single register value, and the interface of get_thread_regs, which took a full pt_regs, the implementation created an on-stack pt_regs, filled it in, and returned one field. do_task_stat calls KSTK_* twice, resulting in two local pt_regs, blowing out the stack. This patch changes the interface (and name) of get_thread_regs to just return a single register from a jmp_buf. The include of archsetjmp.h" in registers.h to get the definition of jmp_buf exposed a bogus include of <setjmp.h> in start_up.c. <setjmp.h> shouldn't be used anywhere any more since UML uses the klibc setjmp/longjmp. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Clean set_ether_mac usage. Maybe could also be removed, but surely it can't be a global function taking a void* argument. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by:
-
Jeff Dike authored
timer_irq_inited was useless, so it is removed. Signed-off-by:
-
Jeff Dike authored
set_interval returns an error instead of panicing if setitimer fails. Some of its callers now check the return. enable_timer is largely tt-mode-specific, so it is marked as such, and the only skas-mode caller is made to call set-interval instead. user_time_init was a no-value-added wrapper around set_interval, so it is gone. Since set_interval is now called from kernel code, callers no longer pass ITIMER_* to it. Instead, they pass a flag which is converted into ITIMER_REAL or ITIMER_VIRTUAL. Signed-off-by:
-
Jeff Dike authored
Have most signals go through an arch-provided handler which recovers the sigcontext and then calls a generic handler. This replaces the ARCH_GET_SIGCONTEXT macro, which was somewhat fragile. On x86_64, recovering %rdx (which holds the sigcontext pointer) must be the first thing that happens. sig_handler duly invokes that first, but there is no guarantee that I can see that instructions won't be reordered such that %rdx is used before that. Having the arch provide the handler seems much more robust. Some signals in some parts of UML require their own handlers - these places don't call set_handler any more. They call sigaction or signal themselves. Signed-off-by:
-
Jeff Dike authored
- Various cleanups in the sigio code. - Removed explicit zero-initializations of a few structures. - Improved some error messages. - An API change - there was an asymmetry between reactivate_fd calling maybe_sigio_broken, which goes through all the machinery of figuring out if a file descriptor supports SIGIO and applying the workaround to it if not, and deactivate_fd, which just turns off the descriptor. This is changed so that only activate_fd calls maybe_sigio_broken, when the descriptor is first seen. reactivate_fd now calls add_sigio_fd, which is symmetric with ignore_sigio_fd. This removes a recursion which makes a critical section look more critical than it really was, obsoleting a big comment to that effect. This requires keeping track of all descriptors which are getting the SIGIO treatment, not just the ones being polled at any given moment, so that reactivate_fd, through add_sigio_fd, doesn't try to tell the SIGIO thread about descriptors it doesn't care about. Signed-off-by:
-
Jeff Dike authored
UML can get a SIGBUS anywhere if the tmpfs mount being used for its memory runs out of space. This patch adds a printk before the panic to provide a clue as to what likely went wrong. Signed-off-by:
-
Jeff Dike authored
There were some bugs in handling failures to exec helper programs. errno was passed back from the child with the wrong sign. It was also ignored. In the case where it mattered, the errno from the (successful) read in the parent was used instead. Signed-off-by:
-
Jeff Dike authored
arch/um/kernel/tlb.c had some pretty serious whitespace problems. I also fixed some returns. Signed-off-by:
-
Jeff Dike authored
Stack randomization needs to be conditional on the personality allowing it. Signed-off-by:
-
Jeff Dike authored
There were a bunch of missed ARRAY_SIZE opportunities. Also, some formatting fixes in the affected areas of code. Signed-off-by:
-
Jeff Dike authored
This patch adds an implementation of setjmp and longjmp to UML, allowing access to the inside of a jmpbuf without needing the access macros formerly provided by libc. The implementation is stolen from klibc. I copy the relevant files into arch/um. I have another patch which avoids the copying, but requires klibc be in the tree. setjmp and longjmp users required some tweaking. Includes of <setjmp.h> were removed and includes of the UML longjmp.h were added where necessary. There are also replacements of siglongjmp with UML_LONGJMP which I somehow missed earlier. Signed-off-by:
-
Rafael J. Wysocki authored
Add the pm_trace attribute in /sys/power which has to be explicitly set to one to really enable the "PM tracing" code compiled in when CONFIG_PM_TRACE is set (which modifies the machine's CMOS clock in unpredictable ways). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Detect the situations in which the time after a resume from disk would be earlier than the time before the suspend and prevent them from happening on i386. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Acked-by:
-
Rafael J. Wysocki authored
Hack uart_suspend_port() and uart_resume_port() so that serial console ports are not suspended if CONFIG_DISABLE_CONSOLE_SUSPEND is set. This makes it possible to debug the suspend and resume routines of all device drivers as well as the lowest-level swsusp code with the help of the serial console. Signed-off-by:
-
Rafael J. Wysocki authored
Change suspend_console() so that it waits for all consoles to flush the remaining messages and make it possible to switch the console suspending off with the help of a Kconfig option. Signed-off-by:
-
Rafael J. Wysocki authored
Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by:
-
Rafael J. Wysocki authored
Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by:
-
Rafael J. Wysocki authored
Introduce some constants that hopefully will help improve the readability of code in kernel/power/snapshot.c. Signed-off-by:
-
Rafael J. Wysocki authored
The name of the pagedir_nosave variable does not make sense any more, so it seems reasonable to change it to something more meaningful. Signed-off-by:
-
Rafael J. Wysocki authored
Remove some things that are no longer used or defined elsewhere from suspend.h and make the inline version of software_suspend() return the right error code. Signed-off-by:
-
Rafael J. Wysocki authored
Get rid of the FIXME in kernel/power/snapshot.c#alloc_pagedir() and simplify the functions called by it. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Move some functions in kernel/power/snapshot.c to a better place (in the same file) and introduce free_image_page() (will be necessary in the future). Signed-off-by:
-
Rafael J. Wysocki authored
Clean up mm/page_alloc.c#mark_free_pages() and make it avoid clearing PageNosaveFree for PageNosave pages. This allows us to get rid of an ugly hack in kernel/power/snapshot.c#copy_data_pages(). Additionally, the page-copying loop in copy_data_pages() is moved to an inline function. Signed-off-by:
-
Rafael J. Wysocki authored
The current suspend code has to be run on one CPU, so we use the CPU hotplug to take the non-boot CPUs offline on SMP machines. However, we should also make sure that these CPUs will not be enabled by someone else after we have disabled them. The functions disable_nonboot_cpus() and enable_nonboot_cpus() are moved to kernel/cpu.c, because they now refer to some stuff in there that should better be static. Also it's better if disable_nonboot_cpus() returns an error instead of panicking if something goes wrong, and enable_nonboot_cpus() has no reason to panic(), because the CPUs may have been enabled by the userland before it tries to take them online. Signed-off-by:
-
Rafael J. Wysocki authored
On x86_64 machines with more than 2 GB of RAM there are large memory gaps (with no corresponding kernel virtual addresses) and reserved memory regions between areas of usable physical RAM. Moreover, if CONFIG_FLATMEM is set, they appear within the normal zone. swsusp should not try to save them, so the corresponding page structs have to be marked as 'nosave'. Signed-off-by:
-
Rafael J. Wysocki authored
Add comments describing struct snapshot_handle and its members, change the confusing name of its member 'page' to 'cur'. Signed-off-by:
-
Rafael J. Wysocki authored
Clean up some loops over pfns for each zone in snapshot.c: reduce the number of additions to perform, rework detection of saveable pages and make the code a bit less difficult to understand, hopefully. Signed-off-by:
-
Andrew Morton authored
Implement async reads for swsusp resuming. Crufty old PIII testbox: 15.7 MB/s -> 20.3 MB/s Sony Vaio: 14.6 MB/s -> 33.3 MB/s I didn't implement the post-resume bio_set_pages_dirty(). I don't really understand why resume needs to run set_page_dirty() against these pages. It might be a worry that this code modifies PG_Uptodate, PG_Error and PG_Locked against the image pages. Can this possibly affect the resumed-into kernel? Hopefully not, if we're atomically restoring its mem_map? Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by:
-
Andrew Morton authored
Add some instrumentation to the swsusp readin code to show what bandwidth we're achieving. Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Andrew Morton authored
Switch the swsusp writeout code from 4k-at-a-time to 4MB-at-a-time. Crufty old PIII testbox: 12.9 MB/s -> 20.9 MB/s Sony Vaio: 14.7 MB/s -> 26.5 MB/s The implementation is crude. A better one would use larger BIOs, but wouldn't gain any performance. The memcpys will be mostly pipelined with the IO and basically come for free. The ENOMEM path has not been tested. It should be. Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Andrew Morton authored
Add some instrumentation to the swsusp writeout code to show what bandwidth we're achieving. Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
