- 15 Jul, 2020 6 commits
-
-
Ioana Ciornei authored
Link state interrupts will be transmitted to the DPSW object even though the user has not yet issued a 'ifconfig up' on a switch interface. Don't act on those interrupts since there are of no interrest. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20200714133431.17532-3-ioana.ciornei@nxp.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ioana Ciornei authored
On the .ndo_open() callback set netif_carrier_off() until the link state interrupt is received so that the LOWER_UP flag does not show up incorrectly in the output of 'ip link show'. Signed-off-by:
-
Ivan Safonov authored
Remove unused members of struct xmit_buf: alloc_sz, ff_hwaddr, dma_transfer_addr, bpending and last. Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20200712123821.553420-1-insafonov@gmail.comSigned-off-by:
-
Zhixu Zhao authored
A coding alignment issue is found by checkpatch.pl. Fix it by using a temporary for gasket_dev->bar_data[bar_num]. Signed-off-by:
Zhixu Zhao <zhixu001@126.com> Link: https://lore.kernel.org/r/20200715133313.16327-1-zhixu001@126.comSigned-off-by:
-
Suraj Upadhyay authored
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as it creates unnecessary midlayering for include/linux/dma-mapping.h APIs, instead use dma-mapping.h APIs directly. The patch has been generated with the coccinelle script below and compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, (enum dma_data_direction)E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200713143253.GA14953@blackclownSigned-off-by:
-
Baidyanath Kundu authored
This patch fixes the checkpatch.pl warning: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by:
Baidyanath Kundu <kundubaidya99@gmail.com> Link: https://lore.kernel.org/r/20200713143653.32332-1-kundubaidya99@gmail.comSigned-off-by:
-
- 13 Jul, 2020 10 commits
-
-
Suraj Upadhyay authored
Use direct assignment instead of using memset with just one byte as an argument. Issue found by checkpatch.pl. Signed-off-by:
-
Suraj Upadhyay authored
Simplify while loops into more readable and simple for loops. Signed-off-by:
-
Suraj Upadhyay authored
Simplify while loops into more readable and simple for loops. Signed-off-by:
-
Suraj Upadhyay authored
Issue found by checkpatch.pl Signed-off-by:
-
Suraj Upadhyay authored
Issue found with checkpatch.pl Signed-off-by:
-
Suraj Upadhyay authored
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as it creates unnecessary midlayering for include/linux/dma-mapping.h APIs, instead use dma-mapping.h APIs directly. The patch has been generated with the coccinelle script below and compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, (enum dma_data_direction)E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713091305.32708-1-grandmaster@al2klimov.deSigned-off-by:
-
Suraj Upadhyay authored
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as it creates unnecessary midlayering for include/linux/dma-mapping.h APIs, instead use dma-mapping.h APIs directly. The patch has been generated with the coccinelle script below and compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Signed-off-by:
-
Suraj Upadhyay authored
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as it creates unnecessary midlayering for include/linux/dma-mapping.h APIs, instead use dma-mapping.h APIs directly. The patch has been generated with the coccinelle script below and compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_ATOMIC) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, (enum dma_data_direction)E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, (enum dma_data_direction)E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Signed-off-by:
-
Gustavo A. R. Silva authored
Assign array_size() to variable _size_ and use it in multiple places. This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200710183350.GA8376@embeddedorSigned-off-by:
-
- 10 Jul, 2020 16 commits
-
-
John Oldman authored
clear below issues reported by checkpatch.pl: CHECK: Using comparison to true is error prone CHECK: Comparison to NULL should be written "!oldest" Signed-off-by:
John Oldman <john.oldman@polehill.co.uk> Link: https://lore.kernel.org/r/20200710113113.1648-1-john.oldman@polehill.co.ukSigned-off-by:
-
Mauro Dreissig authored
In the call to dev_err(), remove the cast of size_t to int and change the format string accordingly. As reported by the kernel test robot, the correct format string for a size_t argument should be %zu. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Mauro Dreissig <mukadr@gmail.com> Link: https://lore.kernel.org/r/20200705143552.9368-6-mukadr@gmail.comSigned-off-by:
-
Mauro Dreissig authored
Remove useless variable 'raw' from function rtl871x_open_fw() making the code a bit easier to understand. Signed-off-by:
-
Mauro Dreissig authored
Use macro ETH_ALEN which defines the number of octets in an ethernet address. Signed-off-by:
-
Mauro Dreissig authored
Simplify some expressions by using boolean operations. Signed-off-by:
-
Mauro Dreissig authored
This way we don't need the comment stating that 49152 equals 48k. Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
-
John Oldman authored
clear below issues reported by checkpatch.pl: CHECK: Using comparison to false is error prone CHECK: Using comparison to true is error pron Signed-off-by:
-
John Oldman authored
clear below issues reported by checkpatch.pl: CHECK: Using comparison to false is error prone Signed-off-by:
-
Mauro Dreissig authored
Add __must_hold() sparse annotation to r8712_sitesurvey_cmd(), replacing the comments on top of the function. Signed-off-by:
-
Michael Straube authored
All source and header files have a GPL-2.0 SPDX identifier. The 'copying' file with the whole GPL text is not needed, delete it. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200703122604.12096-2-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. The file ieee80211_module.c has a proper SPDX line, so the GPL boiler plate text is not needed. Signed-off-by:
-
Linus Walleij authored
The code has the functionality to insert the GPIO lines using the global GPIO numbers through module parameters. As we are clearly deprecating the use of global GPIO numbers look up the GPIO descriptors from the device instead. This usually falls back to device hardware descriptions using e.g. device tree or ACPI. This device clearly supports device tree when used over SPI for example. For example, this can be supplied in the device tree like so: wfx@0x01 { compatible = "silabs,wf200"; reset-gpios = <&gpio0 1>; wakeup-gpios = <&gpio0 2>; }; Cc: Jérôme Pouiller <jerome.pouiller@silabs.com> Reviewed-by:Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200703130756.514868-1-linus.walleij@linaro.orgSigned-off-by:
-
Colin Ian King authored
The variable bytes_done is not initialized and hence the first FIFO size check on bytes_done may be breaking prematurely from the loop if bytes_done contains a large bogus uninitialized value. Fix this by initializing bytes_done to zero. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: a9408ad7 ("staging: wfx: load the firmware faster") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
- 03 Jul, 2020 8 commits
-
-
Jérôme Pouiller authored
When multiple interface on different channels are in use. It is necessary to advertise the AP that the device is no more awake before to switch to the other channel. Until now, PS-Poll was the preferred mechanism for that. However. The new firmwares (>= 3.7) now nicely support FastPS. FastPS improves bandwidth and compatibility with AP. This patch drop the complex and rarely used mechanism introduced in the commit dd5eba1b ("staging: wfx: fix support for AP that do not support PS-Poll") and use FastPS as soon as it is possible. Signed-off-by:
-
Jérôme Pouiller authored
In some advanced usage or debug scenarios, it could interesting to change the value of ps_timeout or eventually to force use of PS-Poll frames. The wext API (used by iwconfig) provide a way to change ps_timeout. However, this API is obsolete and it seems a little weird to use (it seems it does apply the change, so the user have to disable then re-enable de power save) On side of nl80211, there is no way to change the ps_timeout. This patch provides a file in debugfs to change the value of ps_timeout. Signed-off-by:
-
Jérôme Pouiller authored
To enable the TKIP/CCMP replay protection, the frames has to be processed in the right order. However, the device is not able to re-order the frames during BlockAck sessions. Mac80211 is able to reorder the frames, but it need the information about the BlockAck sessions start and stop. Unfortunately, since the BlockAck is fully handled by the hardware, these frames were not forwarded to the host. So, if the driver ask to mac80211 to apply the replay protection, it drop all misordered frames. So, until now, the driver explicitly asked to mac80211 to not apply the CCMP/TKIP replay protection. The situation has changed with the API 3.4 of the device firmware. The firmware forward the BlockAck information. Mac80211 is now able to correctly reorder the frames. There is no more reasons to drop cryptographic data. This patch also impact the older firmwares. There will be a performance impact on these firmware (since the misordered frames will dropped). However, we can't keep the replay protection disabled. Signed-off-by:
-
Jérôme Pouiller authored
We don't want mac80211 try to check MMIC and other security mechanisms. So, the driver remove all the data related to the encryption (IV, ICV, MMIC). However, enabling RX_FLAG_PN_VALIDATED is sufficient for that. So, drop the useless function wfx_drop_encrypt_data() and enable RX_FLAG_PN_VALIDATED. Signed-off-by:
-
Jérôme Pouiller authored
It seems that in the old days, the RSSI information could be missing. In this case, in order to not pollute the RSSI stats, the frame was dropped (!). It is far better to mark the frame with the flag RX_FLAG_NO_SIGNAL_VAL. In add, the problem seems now fixed in the firmware (at least, it has not been encountered with recent firmwares). Signed-off-by:
-
Jérôme Pouiller authored
Since the driver does not call ieee80211_sta_set_buffered() anymore, it is no more necessary to maintain a counter of buffered frames for each stations. This change allows to simplify the processing in multiple places in the driver. Signed-off-by:
-
Jérôme Pouiller authored
When a station go to sleep, the driver receive the status REQUEUE and forward this answer to mac80211. So, neither the driver, neither the hardware buffer the frames. So the call to ieee80211_sta_set_buffered is useless. In add, it seems that mac80211 does not expect to receive ieee80211_sta_set_buffered(false) after the station is asleep(). When the device send data to a station, the following sequence can be observed: - Mac80211 call wfx_sta_notify(awake). - The driver calls ieee80211_sta_set_buffered(true). Since the station is awake, its TIM is not set. - Mac80211 receive a power save notification from the station, so it calls wfx_sta_notify(asleep). - Then, since the driver has declared it has buffered some frames, the TIM of the station should be set. This action is delayed by mac80211. - The device also notice the station go to sleep. It replies the REQUEUE status for the buffered frames. The driver forward this status to mac80211. - There is no more frames in queues, so the driver call ieee80211_sta_set_buffered(false). - Mac80211 updates the TIM but since there is no frames buffered by the driver, it set the TIM for the station to 0. Anyway, correctly use the ieee80211_sta_set_buffered() API solves the problem. Signed-off-by: -
Jérôme Pouiller authored
As discussed here[1], if a message was smaller than the size of the message header, it could be incorrectly processed. [1] https://lore.kernel.org/driverdev-devel/2302785.6C7ODC2LYm@pc-42/Signed-off-by:
-
