- 30 Jun, 2021 3 commits
-
-
Colin Ian King authored
There are handful of spelling mistakes in two dev_err error messages and comments. Fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210629102956.17901-1-colin.king@canonical.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Wang Hai authored
In case of error, the function devm_kzalloc() and devm_kcalloc() return NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 3bc61cfd ("clk: add support for the lmk04832") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20210630020322.2555946-1-wanghai38@huawei.comReviewed-by:
Liam Beguin <lvb@xiphos.com> Signed-off-by:
-
Wang Hai authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. Fixes: c392df19 ("clk: stm32mp1: move RCC reset controller into RCC clock driver") Reported-by:
-
- 29 Jun, 2021 11 commits
-
-
Stephen Boyd authored
- Stop using clock-output-names in ST clk drivers * clk-st: dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible clk: st: clkgen-fsyn: embed soc clock outputs within compatible data dt-bindings: clock: st: clkgen-pll: add new introduced compatible clk: st: clkgen-pll: embed soc clock outputs within compatible data dt-bindings: clock: st: flexgen: add new introduced compatible clk: st: flexgen: embed soc clock outputs within compatible data clk: st: clkgen-pll: remove unused variable of struct clkgen_pll * clk-si: clk: si5341: Add sysfs properties to allow checking/resetting device faults clk: si5341: Add silabs,iovdd-33 property clk: si5341: Add silabs,xaxb-ext-clk property clk: si5341: Allow different output VDD_SEL values clk: si5341: Update initialization magic clk: si5341: Check for input clock presence and PLL lock on startup clk: si5341: Avoid divide errors due to bogus register contents clk: si5341: Wait for DEVICE_READY on startup dt-bindings: clock: clk-si5341: Add new attributes * clk-hisilicon: clk: hisilicon: Add clock driver for hi3559A SoC dt-bindings: Document the hi3559a clock bindings
-
Stephen Boyd authored
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC * clk-lmk04832: clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: lmk04832: add support for digital delay clk: add support for the lmk04832 dt-bindings: clock: add ti,lmk04832 bindings * clk-stm: clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: stm32mp1: move RCC reset controller into RCC clock driver clk: stm32mp1: convert to module driver clk: stm32mp1: remove intermediate pll clocks clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock * clk-rohm: clk: bd718xx: Drop BD70528 support * clk-actions: clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC dt-bindings: clock: Add NIC and ETHERNET bindings for Actions S500 SoC clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC clk: actions: Fix SD clocks factor table on Owl S500 SoC clk: actions: Fix UART clock dividers on Owl S500 SoC * clk-ingenic: clk: ingenic: Add support for the JZ4760 clk: ingenic: Support overriding PLLs M/N/OD calc algorithm clk: ingenic: Remove pll_info.no_bypass_bit clk: ingenic: Read bypass register only when there is one clk: Support bypassing dividers dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles -
Stephen Boyd authored
Merge branches 'clk-rockchip', 'clk-amlogic', 'clk-yaml', 'clk-zynq' and 'clk-socfpga' into clk-next * clk-rockchip: clk: rockchip: export ACLK_VCODEC for RK3036 clk: rockchip: fix rk3568 cpll clk gate bits clk: rockchip: Optimize PLL table memory usage * clk-amlogic: clk: meson: g12a: Add missing NNA source clocks for g12b clk: meson: axg-audio: improve deferral handling clk: meson: g12a: fix gp0 and hifi ranges clk: meson: pll: switch to determine_rate for the PLL ops * clk-yaml: dt-bindings: clock: gpio-mux-clock: Convert to json-schema * clk-zynq: clk: zynqmp: Handle divider specific read only flag clk: zynqmp: Use firmware specific mux clock flags clk: zynqmp: Use firmware specific divider clock flags clk: zynqmp: Use firmware specific common clock flags clk: zynqmp: pll: Remove some dead code clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE * clk-socfpga: clk: socfpga: clk-pll: Remove unused variable 'rc' clk: agilex/stratix10/n5x: fix how the bypass_reg is handled clk: agilex/stratix10: add support for the 2nd bypass clk: agilex/stratix10: fix bypass representation clk: agilex/stratix10: remove noc_clk
-
Stephen Boyd authored
* clk-legacy: clkdev: remove unused clkdev_alloc() interfaces clkdev: remove CONFIG_CLKDEV_LOOKUP m68k: coldfire: remove private clk_get/clk_put m68k: coldfire: use clkdev_lookup on most coldfire mips: ralink: convert to CONFIG_COMMON_CLK mips: ar7: convert to CONFIG_COMMON_CLK mips: ar7: convert to clkdev_lookup * clk-vc5: clk: vc5: fix output disabling when enabling a FOD * clk-allwinner: clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio * clk-nvidia: clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing() clk: tegra: Add stubs needed for compile-testing clk: tegra: Don't deassert reset on enabling clocks clk: tegra: Mark external clocks as not having reset control clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling clk: tegra: Don't allow zero clock rate for PLLs clk: tegra: Halve SCLK rate on Tegra20 clk: tegra: Ensure that PLLU configuration is applied properly clk: tegra: Fix refcounting of gate clocks clk: tegra30: Use 300MHz for video decoder by default * clk-imx: clk: imx8mq: remove SYS PLL 1/2 clock gates clk: imx: scu: Do not enable runtime PM for CPU clks clk: imx: scu: add parent save and restore clk: imx: scu: Only save DC SS clock using non-cached clock rate clk: imx: scu: Add A72 frequency scaling support clk: imx: scu: Add A53 frequency scaling support clk: imx: scu: bypass pi_pll enable status restore clk: imx: scu: detach pd if can't power up clk: imx: scu: bypass cpu clock save and restore clk: imx: scu: add parallel port clock ops clk: imx: scu: add more scu clocks clk: imx: scu: add enet rgmii gpr clocks clk: imx8qm: add clock valid resource checking clk: imx8qxp: add clock valid checking mechnism clk: imx: scu: add gpr clocks support clk: imx: scu: remove legacy scu clock binding support dt-bindings: arm: imx: scu: drop deprecated legacy clock binding dt-bindings: arm: imx: scu: fix naming typo of clk compatible string clk: imx: Remove the audio ipg clock from imx8mp
-
Stephen Boyd authored
- duty cycle setting support on qcom clks - qcom MDM9607 GCC - qcom sc8180x display clks - qcom SM6125 GCC - Add TI am33xx spread spectrum clock support * clk-qcom: (22 commits) clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare clk: qcom: Add camera clock controller driver for SM8250 dt-bindings: clock: add QCOM SM8250 camera clock bindings clk: qcom: clk-alpha-pll: add support for zonda pll clk/qcom: Remove unused variables clk: qcom: smd-rpmcc: Add support for MSM8226 rpm clocks clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings clk: qcom: Add SM6125 (TRINKET) GCC driver dt-bindings: clk: qcom: gcc-sm6125: Document SM6125 GCC driver clk: qcom: gcc: Add support for a new frequency for SC7280 clk: qcom: smd-rpm: Fix wrongly assigned RPM_SMD_PNOC_CLK dt-bindings: clock: qcom: rpmcc: Document MSM8226 compatible clk: qcom: dispcc-sm8250: Add EDP clocks clk: qcom: dispcc-sm8250: Add sc8180x support clk: qcom: smd-rpm: De-duplicate identical entries clk: qcom: smd-rpm: Switch to parent_data clk: qcom: Add MDM9607 GCC driver dt-bindings: clock: Add MDM9607 GCC clock bindings clk: qcom: cleanup some dev_err_probe() calls ... * clk-versatile: clk: versatile: Depend on HAS_IOMEM clk: versatile: remove dependency on ARCH_* * clk-renesas: (22 commits) clk: renesas: Add support for R9A07G044 SoC clk: renesas: Add CPG core wrapper for RZ/G2L SoC dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver dt-bindings: clock: Add r9a07g044 CPG Clock Definitions clk: renesas: r8a77995: Add ZA2 clock clk: renesas: cpg-mssr: Make srstclr[] comment block consistent clk: renesas: cpg-mssr: Remove unused [RM]MSTPCR() definitions clk: renesas: r9a06g032: Switch to .determine_rate() clk: renesas: div6: Implement range checking clk: renesas: div6: Consider all parents for requested rate clk: renesas: div6: Switch to .determine_rate() clk: renesas: div6: Simplify src mask handling clk: renesas: div6: Use clamp() instead of clamp_t() clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe() clk: renesas: r8a779a0: Add ISPCS clocks clk: renesas: rcar-gen3: Add boost support to Z clocks clk: renesas: rcar-gen3: Add custom clock for PLLs clk: renesas: rcar-gen3: Increase Z clock accuracy clk: renesas: rcar-gen3: Grammar s/dependent of/dependent on/ clk: renesas: rcar-gen3: Remove superfluous masking in cpg_z_clk_set_rate() ... * clk-sifive: clk: analogbits: fix doc warning in wrpll-cln28hpc.c clk: sifive: Fix kernel-doc * clk-ti: drivers: ti: remove redundant error message in adpll.c clk: keystone: syscon-clk: Add support for AM64 specific epwm-tbclk dt-bindings: clock: ehrpwm: Add support for AM64 specific compatible clk: ti: add am33xx/am43xx spread spectrum clock support ARM: dts: am43xx-clocks: add spread spectrum support ARM: dts: am33xx-clocks: add spread spectrum support dt-bindings: ti: dpll: add spread spectrum support clk: ti: fix typo in routine description
-
Rajan Vaja authored
Add support for divider specific read only CCF flag (CLK_DIVIDER_READ_ONLY). Signed-off-by:
Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lore.kernel.org/r/20210628070122.26217-5-rajan.vaja@xilinx.comSigned-off-by:
-
Rajan Vaja authored
Use ZynqMP specific mux clock flags instead of using CCF flags. Signed-off-by:
-
Rajan Vaja authored
Use ZynqMP specific divider clock flags instead of using CCF flags. Signed-off-by:
-
Rajan Vaja authored
Currently firmware passes CCF specific flags to ZynqMP clock driver. So firmware needs to be updated if CCF flags are changed. The firmware should have its own 'flag number space' that is distinct from the common clk framework's 'flag number space'. So define and use ZynqMP specific common clock flags instead of using CCF flags. Signed-off-by:
-
Stephen Boyd authored
Presumably we want to use this match table so add a module device table and set the driver match pointer appropriately. Reported-by:
kernel test robot <lkp@intel.com> Cc: Liam Beguin <lvb@xiphos.com> Fixes: 3bc61cfd ("clk: add support for the lmk04832") Link: https://lore.kernel.org/r/20210629060751.3119453-2-sboyd@kernel.orgSigned-off-by:
-
Stephen Boyd authored
This driver depends on SPI. Otherwise compilation fails clk-lmk04832.c:(.text+0x1668): undefined reference to `spi_get_device_id' Reported-by:
-
- 28 Jun, 2021 26 commits
-
-
Gabriel Fernandez authored
Platform STM32MP1 can be used in configuration where some clock resources cannot be accessed by Linux kernel when executing in non-secure state of the CPU(s). In such configuration, the RCC clock driver must not register clocks it cannot access. They are expected to be registered from another clock driver such as the SCMI clock driver. This change uses specific compatible string "st,stm32mp1-rcc-secure" to specify RCC clock driver configuration where RCC is secure. Signed-off-by:
Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-12-gabriel.fernandez@foss.st.comSigned-off-by:
-
Gabriel Fernandez authored
Introduce new compatible string "st,stm32mp1-rcc-secure" for stm32mp1 clock driver when the device is configured with RCC security support hardened. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210617051814.12018-11-gabriel.fernandez@foss.st.comSigned-off-by:
-
Gabriel Fernandez authored
Add ID to SCMI0 to exposes reset controller for the MCU HOLD BOOT resource. Signed-off-by:
Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by:
-
Gabriel Fernandez authored
stm32mp15 TZ secure firmware provides SCMI reset domains for secure resources. This change defines the SCMI reset domain identifiers used by SCMI agents and servers. Stm32mp15 TZ secure firmware provides SCMI clocks for oscillators, some PLL output and few secure aware interfaces. This change defines the SCMI clock identifiers used by SCMI agents and servers. Server SCMI0 exposes reset controllers for resources under RCC[TZEN] configuration control. Signed-off-by:
-
Gabriel Fernandez authored
stm32mp15 TZ secure firmware provides SCMI clocks for oscillators, some PLL output and few secure aware interfaces. This change defines the SCMI clock identifiers used by SCMI agents and servers. Server SCMI0 exposes clocks and reset controllers for resources under RCC[TZEN] configuration control. Server SCMI1 exposes clocks for resources under RCC[MCKPROT] control. Signed-off-by:
-
Gabriel Fernandez authored
st32mp1 RCC reset driver was moved into stm32mp1 RCC clock driver. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Dongjiu Geng authored
Add clock drivers for hi3559A SoC, this driver controls the SoC registers to supply different clocks to different IPs in the SoC. Signed-off-by:
Dongjiu Geng <gengdongjiu@huawei.com> Link: https://lore.kernel.org/r/1616498973-47067-3-git-send-email-gengdongjiu1@gmail.com [sboyd@kernel.org: Mark arrays static, add __iomem, drop unused array, avoid kfree of devm memory] Signed-off-by:
-
Dongjiu Geng authored
Add DT bindings documentation for hi3559a SoC clock. Signed-off-by:
-
Robert Hancock authored
Add sysfs property files to allow viewing the current and latched states of the input present and PLL lock bits, and allow resetting the latched fault state. This allows manual checks or automated userspace polling for faults occurring after initialization. Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20210325192643.2190069-10-robert.hancock@calian.comSigned-off-by:
-
Robert Hancock authored
Add a property to allow specifying that the external I2C IO pins are using 3.3V voltage thresholds rather than 1.8V. Signed-off-by:
-
Robert Hancock authored
Add a property to allow specifying that the device XA/XB pins are used for an external clock input rather than for a clock crystal. Signed-off-by:
-
Robert Hancock authored
The driver was not previously programming the VDD_SEL values for each output to indicate what external VDDO voltage was used for each. Add ability to specify a regulator supplying the VDDO pin for each output of the device. The voltage of the regulator is used to automatically set the VDD_SEL value appropriately. If no regulator is specified and the chip is being reconfigured, assume 2.5V which appears to be the chip default. Signed-off-by:
-
Robert Hancock authored
Update the default register settings to include the VCO_RESET_CALCODE settings (set by the SiLabs ClockBuilder software but not described in the datasheet). Also update part of the initialization sequence to match ClockBuilder and the datasheet. Fixes: 3044a860 ("clk: Add Si5341/Si5340 driver") Signed-off-by:
-
Robert Hancock authored
After initializing the device, wait for it to report that the input clock is present and the PLL has locked before declaring success. Fixes: 3044a860 ("clk: Add Si5341/Si5340 driver") Signed-off-by:
-
Robert Hancock authored
If the Si5341 is being initially programmed and has no stored NVM configuration, some of the register contents may contain unexpected values, such as zeros, which could cause divide by zero errors during driver initialization. Trap errors caused by zero registers or zero clock rates which could result in divide errors later in the code. Fixes: 3044a860 ("clk: Add Si5341/Si5340 driver") Signed-off-by:
-
Robert Hancock authored
The Si5341 datasheet warns that before accessing any other registers, including the PAGE register, we need to wait for the DEVICE_READY register to indicate the device is ready, or the process of the device loading its state from NVM can be corrupted. Wait for DEVICE_READY on startup before continuing initialization. This is done using a raw I2C register read prior to setting up regmap to avoid any potential unwanted automatic PAGE register accesses from regmap at this stage. Fixes: 3044a860 ("clk: Add Si5341/Si5340 driver") Signed-off-by:
-
Robert Hancock authored
Add new silabs,xaxb-ext-clk and silabs,iovdd-33 properties. Changed vdd-supply on top-level node to optional since it is not actually used by the driver. Removed vdd-supply from output sub-nodes, as it was not supported by the driver and it is not easily possible to support this in that location with the kernel regulator infrastructure. Changed to have vddoX-supply attributes for each output on the top-level device node. Signed-off-by:
-
Yu Jiahua authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Yu Jiahua <yujiahua1@huawei.com> Link: https://lore.kernel.org/r/20210616034826.37276-1-yujiahua1@huawei.comSigned-off-by:
-
Alain Volmat authored
New compatible are added, supporting various kind of clkgen-fsyn used for STiH407, STiH410 and STiH418 Signed-off-by:
Alain Volmat <avolmat@me.com> Link: https://lore.kernel.org/r/20210331201632.24530-8-avolmat@me.comAcked-by:
-
Alain Volmat authored
In order to avoid relying on the old style description via the DT clock-output-names, add compatible data describing the flexgen outputs clocks for all STiH407/STiH410 and STiH418 SOCs. In order to ease transition between the two methods, this commit introduce the new compatible without removing the old method. Once DTs will be fixed, the method relying on DT clock-output-names will be removed from this driver as well as old compatibles. Signed-off-by:
Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210331201632.24530-7-avolmat@me.comSigned-off-by:
-
Alain Volmat authored
New compatible are added, supporting various kind of clkgen-pll used for STiH407, STiH410 and STiH418 Signed-off-by:
-
Alain Volmat authored
In order to avoid relying on the old style description via the DT clock-output-names, add compatible data describing the flexgen outputs clocks for all STiH407/STiH410 and STiH418 SOCs. In order to ease transition between the two methods, this commit introduce the new compatible without removing the old method. Once DTs will be fixed, the method relying on DT clock-output-names will be removed from this driver as well as old compatibles. Signed-off-by:
-
Alain Volmat authored
New compatible are added, supporting various kind of flexgen in STiH407, STiH410 and STiH418 Signed-off-by:
-
Alain Volmat authored
In order to avoid relying on the old style description via the DT clock-output-names, add compatible data describing the flexgen outputs clocks for all STiH407/STiH410 and STiH418 SOCs. In order to ease transition between the two methods, this commit introduce the new compatible without removing the old method. Once DTs will be fixed, the method relying on DT clock-output-names will be removed from this driver as well as old compatibles. Signed-off-by:
-
Alain Volmat authored
ODF field within the struct clkgen_pll is never used by the driver and can thus be removed. Signed-off-by:
-
Paul Cercueil authored
Add the CGU code and the compatible string to the TCU driver to support the JZ4760 SoC. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210530164923.18134-7-paul@crapouillou.netSigned-off-by:
-
