Pull hwspinlock updates from Ohad Ben-Cohen:
 "Two small hwspinlock changes for better OMAP support, coming from
  Suman Anna"

* tag 'hwspinlock-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock: enable OMAP build for AM33xx, AM43xx & DRA7xx
  hwspinlock/omap: enable module before reading SYSSTATUS register

Pull seccomp fix from James Morris.

BUG(!spin_is_locked()) really doesn't work very well in UP
configurations without any actual spinlock state.  Which is very much
why we have that "assert_spin_lock()" function for this.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  seccomp: Replace BUG(!spin_is_locked()) with assert_spin_lock

Pull hwmon fixes from Guenter Roeck:
 "Several bug fixes in various drivers, plus a minor cleanup in the
  tmp103 driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (tmp103) Remove duplicate test for I2C_FUNC_SMBUS_BYTE_DATA functionality
  hwmon: (w83793) Fix vrm write operation
  hwmon: (w83791d) Fix vrm write operation
  hwmon: (w83627hf) Fix vrm write operation
  hwmon: (vt1211) Fix vrm write operation
  hwmon: (pc87360) Fix vrm write operation
  hwmon: (lm87) Fix vrm write operation
  hwmon: (asb100) Fix vrm write operation
  hwmon: (adm1026) Fix vrm write operation
  hwmon: (adm1025) Fix vrm write operation
  hwmon: (hih6130) Fix missing hih6130->write_length setting
  hwmon: (dme1737) Prevent overflow problem when writing large limits
  hwmon: (emc6w201) Fix temperature limit range
  hwmon: (ads1015) Fix out-of-bounds array access
  hwmon: (lm92) Prevent overflow problem when writing large limits

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...

Pull VFIO updates from Alex Williamson:
 - enable support for bus reset on device release
 - fixes for EEH support

* tag 'vfio-v3.17-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio: Enable VFIO if EEH is not supported
  drivers/vfio: Allow EEH to be built as module
  drivers/vfio: Fix EEH build error
  vfio-pci: Attempt bus/slot reset on release
  vfio-pci: Use mutex around open, release, and remove
  vfio-pci: Release devices with BusMaster disabled

Merge tag 'stable/for-linus-3.17-b-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen bugfixes from David Vrabel:
 - fix ARM build
 - fix boot crash with PVH guests
 - improve reliability of resume/migration

* tag 'stable/for-linus-3.17-b-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: use vmap() to map grant table pages in PVH guests
  x86/xen: resume timer irqs early
  arm/xen: remove duplicate arch_gnttab_init() function

Pull device mapper changes from Mike Snitzer:

 - Allow the thin target to paired with any size external origin; also
   allow thin snapshots to be larger than the external origin.

 - Add support for quickly loading a repetitive pattern into the
   dm-switch target.

 - Use per-bio data in the dm-crypt target instead of always using a
   mempool for each allocation.  Required switching to kmalloc alignment
   for the bio slab.

 - Fix DM core to properly stack the QUEUE_FLAG_NO_SG_MERGE flag

 - Fix the dm-cache and dm-thin targets' export of the minimum_io_size
   to match the data block size -- this fixes an issue where mkfs.xfs
   would improperly infer raid striping was in place on the underlying
   storage.

 - Small cleanups in dm-io, dm-mpath and dm-cache

* tag 'dm-3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm table: propagate QUEUE_FLAG_NO_SG_MERGE
  dm switch: efficiently support repetitive patterns
  dm switch: factor out switch_region_table_read
  dm cache: set minimum_io_size to cache's data block size
  dm thin: set minimum_io_size to pool's data block size
  dm crypt: use per-bio data
  block: use kmalloc alignment for bio slab
  dm table: make dm_table_supports_discards static
  dm cache metadata: use dm-space-map-metadata.h defined size limits
  dm cache: fail migrations in the do_worker error path
  dm cache: simplify deferred set reference count increments
  dm thin: relax external origin size constraints
  dm thin: switch to an atomic_t for tracking pending new block preparations
  dm mpath: eliminate pg_ready() wrapper
  dm io: simplify dec_count and sync_io

Pull MMC updates from Ulf Hansson:
 "Me and Chris Ball decided to try out using my MMC tree as the primary
  one, to simplify handling of patches.

  This pull does thus contains all the MMC patches for 3.17 rc1, no pull
  from Chris this time.

  Details:

  MMC core:
   - forward compatibility for eMMC
   - fix some blacklisted cards with broken secure discard

  MMC host:
   - mmci: Add support for Qualcomm variant
   - mmci: Fix regression for arm_variant
   - sdhci: Various fixes and cleanups
   - sdhci: Improve external VDD regulator support
   - sdhci: Support for DDR50 1.8V mode for BayTrail
   - sdhci-st: Add driver for ST SDHCI controller
   - sh-mmcif: DMA fixes
   - omap_hsmmc: Add support for SDIO interrupts
   - sdhci-pci: Add support for Intel Quark X1000
   - dw_mmc: Update the reset sequence
   - s3cmci: port DMA code to dmaengine API"

* tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
  mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.
  mmc: mmci: Reverse IRQ handling for the arm_variant
  mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()
  mmc: mmci: Remove redundant check of status for DATA irq
  mmc: dw_mmc: change to use recommended reset procedure
  mmc: sdhci-pxav3: Use devm_* managed helpers
  mmc: tmio: Configure DMA slave bus width
  mmc: sh_mmcif: Configure DMA slave bus width
  mmc: sh_mmcif: Fix DMA slave address configuration
  mmc: sh_mmcif: Document DT bindings
  mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback
  mmc: Do not advertise secure discard if it is blacklisted
  mmc: sdhci-msm: Get COMPILE_TEST support
  mmc: sdhci-msm: Remove unnecessary header file inclusion
  mmc: sdhci-msm: Fix the binding example
  mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller
  mmc: sdhci: Preset value not supported in Baytrail eMMC
  mmc: MMC_USDHI6ROL0 should depend on HAS_DMA
  mmc: MMC_SH_MMCIF should depend on HAS_DMA
  ...

Pull block driver changes from Jens Axboe:
 "Nothing out of the ordinary here, this pull request contains:

   - A big round of fixes for bcache from Kent Overstreet, Slava Pestov,
     and Surbhi Palande.  No new features, just a lot of fixes.

   - The usual round of drbd updates from Andreas Gruenbacher, Lars
     Ellenberg, and Philipp Reisner.

   - virtio_blk was converted to blk-mq back in 3.13, but now Ming Lei
     has taken it one step further and added support for actually using
     more than one queue.

   - Addition of an explicit SG_FLAG_Q_AT_HEAD for block/bsg, to
     compliment the the default behavior of adding to the tail of the
     queue.  From Douglas Gilbert"

* 'for-3.17/drivers' of git://git.kernel.dk/linux-block: (86 commits)
  bcache: Drop unneeded blk_sync_queue() calls
  bcache: add mutex lock for bch_is_open
  bcache: Correct printing of btree_gc_max_duration_ms
  bcache: try to set b->parent properly
  bcache: fix memory corruption in init error path
  bcache: fix crash with incomplete cache set
  bcache: Fix more early shutdown bugs
  bcache: fix use-after-free in btree_gc_coalesce()
  bcache: Fix an infinite loop in journal replay
  bcache: fix crash in bcache_btree_node_alloc_fail tracepoint
  bcache: bcache_write tracepoint was crashing
  bcache: fix typo in bch_bkey_equal_header
  bcache: Allocate bounce buffers with GFP_NOWAIT
  bcache: Make sure to pass GFP_WAIT to mempool_alloc()
  bcache: fix uninterruptible sleep in writeback thread
  bcache: wait for buckets when allocating new btree root
  bcache: fix crash on shutdown in passthrough mode
  bcache: fix lockdep warnings on shutdown
  bcache allocator: send discards with correct size
  bcache: Fix to remove the rcu_sched stalls.
  ...

Pull block core bits from Jens Axboe:
 "Small round this time, after the massive blk-mq dump for 3.16.  This
  pull request contains:

   - Fixes for max_sectors overflow in ioctls from Akinoby Mita.

   - Partition off-by-one bug fix in aix partitions from Dan Carpenter.

   - Various small partition cleanups from Fabian Frederick.

   - Fix for the block integrity code sometimes returning the wrong
     vector count from Gu Zheng.

   - Cleanup an re-org of the blk-mq queue enter/exit percpu counters
     from Tejun.  Dependent on the percpu pull for 3.17 (which was in
     the block tree too), that you have already pulled in.

   - A blkcg oops fix, also from Tejun"

* 'for-3.17/core' of git://git.kernel.dk/linux-block:
  partitions: aix.c: off by one bug
  blkcg: don't call into policy draining if root_blkg is already gone
  Revert "bio: modify __bio_add_page() to accept pages that don't start a new segment"
  bio: modify __bio_add_page() to accept pages that don't start a new segment
  block: fix SG_[GS]ET_RESERVED_SIZE ioctl when max_sectors is huge
  block: fix BLKSECTGET ioctl when max_sectors is greater than USHRT_MAX
  block/partitions/efi.c: kerneldoc fixing
  block/partitions/msdos.c: code clean-up
  block/partitions/amiga.c: replace nolevel printk by pr_err
  block/partitions/aix.c: replace count*size kzalloc by kcalloc
  bio-integrity: add "bip_max_vcnt" into struct bio_integrity_payload
  blk-mq: use percpu_ref for mq usage count
  blk-mq: collapse __blk_mq_drain_queue() into blk_mq_freeze_queue()
  blk-mq: decouble blk-mq freezing from generic bypassing
  block, blk-mq: draining can't be skipped even if bypass_depth was non-zero
  blk-mq: fix a memory ordering bug in blk_mq_queue_enter()

Pull networking fixes from David Miller:
 "Several networking final fixes and tidies for the merge window:

   1) Changes during the merge window unintentionally took away the
      ability to build bluetooth modular, fix from Geert Uytterhoeven.

   2) Several phy_node reference count bug fixes from Uwe Kleine-König.

   3) Fix ucc_geth build failures, also from Uwe Kleine-König.

   4) Fix klog false positivies when netlink messages go to network
      taps, by properly resetting the network header.  Fix from Daniel
      Borkmann.

   5) Sizing estimate of VF netlink messages is too small, from Jiri
      Benc.

   6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian.

   7) VLAN untagging is erroneously dependent upon whether the VLAN
      module is loaded or not, but there are generic dependencies that
      matter wrt what can be expected as the SKB enters the stack.
      Make the basic untagging generic code, and do it unconditionally.
      From Vlad Yasevich.

   8) xen-netfront only has so many slots in it's transmit queue so
      linearize packets that have too many frags.  From Zoltan Kiss.

   9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian
      Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits)
  net: bcmgenet: correctly resume adapter from Wake-on-LAN
  net: bcmgenet: update UMAC_CMD only when link is detected
  net: bcmgenet: correctly suspend and resume PHY device
  net: bcmgenet: request and enable main clock earlier
  net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call
  xen-netfront: Fix handling packets on compound pages with skb_linearize
  net: fec: Support phys probed from devicetree and fixed-link
  smsc: replace WARN_ON() with WARN_ON_SMP()
  xen-netback: Don't deschedule NAPI when carrier off
  net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile
  wan: wanxl: Remove typedefs from struct names
  m68k/atari: EtherNEC - ethernet support (ne)
  net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call
  hdlc: Remove typedefs from struct names
  airo_cs: Remove typedef local_info_t
  atmel: Remove typedef atmel_priv_ioctl
  com20020_cs: Remove typedef com20020_dev_t
  ethernet: amd: Remove typedef local_info_t
  net: Always untag vlan-tagged traffic on input.
  drivers: net: Add APM X-Gene SoC ethernet driver support.
  ...

Pull Sparc fixes from David Miller:
 "Sparc bug fixes, one of which was preventing successful SMP boots with
  mainline"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix pcr_ops initialization and usage bugs.
  sparc64: Do not disable interrupts in nmi_cpu_busy()
  sparc: Hook up seccomp and getrandom system calls.
  sparc: fix decimal printf format specifiers prefixed with 0x

Pull x86/apic updates from Thomas Gleixner:
 "This is a major overhaul to the x86 apic subsystem consisting of the
  following parts:

   - Remove obsolete APIC driver abstractions (David Rientjes)

   - Use the irqdomain facilities to dynamically allocate IRQs for
     IOAPICs.  This is a prerequisite to enable IOAPIC hotplug support,
     and it also frees up wasted vectors (Jiang Liu)

   - Misc fixlets.

  Despite the hickup in Ingos previous pull request - caused by the
  missing fixup for the suspend/resume issue reported by Borislav - I
  strongly recommend that this update finds its way into 3.17.  Some
  history for you:

  This is preparatory work for physical IOAPIC hotplug.  The first
  attempt to support this was done by Yinghai and I shot it down because
  it just added another layer of obscurity and complexity to the already
  existing mess without tackling the underlying shortcomings of the
  current implementation.

  After quite some on- and offlist discussions, I requested that the
  design of this functionality must use generic infrastructure, i.e.
  irq domains, which provide all the mechanisms to dynamically map linux
  interrupt numbers to physical interrupts.

  Jiang picked up the idea and did a great job of consolidating the
  existing interfaces to manage the x86 (IOAPIC) interrupt system by
  utilizing irq domains.

  The testing in tip, Linux-next and inside of Intel on various machines
  did not unearth any oddities until Borislav exposed it to one of his
  oddball machines.  The issue was resolved quickly, but unfortunately
  the fix fell through the cracks and did not hit the tip tree before
  Ingo sent the pull request.  Not entirely Ingos fault, I also assumed
  that the fix was already merged when Ingo asked me whether he could
  send it.

  Nevertheless this work has a proper design, has undergone several
  rounds of review and the final fallout after applying it to tip and
  integrating it into Linux-next has been more than moderate.  It's the
  ground work not only for IOAPIC hotplug, it will also allow us to move
  the lowlevel vector allocation into the irqdomain hierarchy, which
  will benefit other architectures as well.  Patches are posted already,
  but they are on hold for two weeks, see below.

  I really appreciate the competence and responsiveness Jiang has shown
  in course of this endavour.  So I'm sure that any fallout of this will
  be addressed in a timely manner.

  FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen
  duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA
  will have a look at the hopefully zero fallout until I'm back"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
  x86/apic/vsmp: Make is_vsmp_box() static
  x86, apic: Remove enable_apic_mode callback
  x86, apic: Remove setup_portio_remap callback
  x86, apic: Remove multi_timer_check callback
  x86, apic: Replace noop_check_apicid_used
  x86, apic: Remove check_apicid_present callback
  x86, apic: Remove mps_oem_check callback
  x86, apic: Remove smp_callin_clear_local_apic callback
  x86, apic: Replace trampoline physical addresses with defaults
  x86, apic: Remove x86_32_numa_cpu_node callback
  x86: intel-mid: Use the new io_apic interfaces
  x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
  x86, irq: Clean up irqdomain transition code
  x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled
  x86, irq, SFI: Release IOAPIC pin when PCI device is disabled
  x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
  x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
  x86, irq: Introduce helper functions to release IOAPIC pin
  x86, irq: Simplify the way to handle ISA IRQ
  ...

Pull x86/efix fixes from Peter Anvin:
 "Two EFI-related Kconfig changes, which happen to touch immediately
  adjacent lines in Kconfig and thus collapse to a single patch"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
  x86/efi: Fix 3DNow optimization build failure in EFI stub

Pull x86/xsave changes from Peter Anvin:
 "This is a patchset to support the XSAVES instruction required to
  support context switch of supervisor-only features in upcoming
  silicon.

  This patchset missed the 3.16 merge window, which is why it is based
  on 3.15-rc7"

* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, xsave: Add forgotten inline annotation
  x86/xsaves: Clean up code in xstate offsets computation in xsave area
  x86/xsave: Make it clear that the XSAVE macros use (%edi)/(%rdi)
  Define kernel API to get address of each state in xsave area
  x86/xsaves: Enable xsaves/xrstors
  x86/xsaves: Call booting time xsaves and xrstors in setup_init_fpu_buf
  x86/xsaves: Save xstate to task's xsave area in __save_fpu during booting time
  x86/xsaves: Add xsaves and xrstors support for booting time
  x86/xsaves: Clear reserved bits in xsave header
  x86/xsaves: Use xsave/xrstor for saving and restoring user space context
  x86/xsaves: Use xsaves/xrstors for context switch
  x86/xsaves: Use xsaves/xrstors to save and restore xsave area
  x86/xsaves: Define a macro for handling xsave/xrstor instruction fault
  x86/xsaves: Define macros for xsave instructions
  x86/xsaves: Change compacted format xsave area header
  x86/alternative: Add alternative_input_2 to support alternative with two features and input
  x86/xsaves: Add a kernel parameter noxsaves to disable xsaves/xrstors

Pull metag architecture updates from James Hogan:
 "Just a couple of minor static analysis fixes, removal of a NULL check
  that should never happen, and fix an error check where an unsigned
  value was being checked to see if it was negative"

* tag 'metag-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: cachepart: Fix failure check
  metag: hugetlbpage: Remove null pointer checks that could never happen

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - stable fix for a bug in nfs3_list_one_acl()
   - speed up NFS path walks by supporting LOOKUP_RCU
   - more read/write code cleanups
   - pNFS fixes for layout return on close
   - fixes for the RCU handling in the rpcsec_gss code
   - more NFS/RDMA fixes"

* tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  nfs: reject changes to resvport and sharecache during remount
  NFS: Avoid infinite loop when RELEASE_LOCKOWNER getting expired error
  SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
  NFS: fix two problems in lookup_revalidate in RCU-walk
  NFS: allow lockless access to access_cache
  NFS: teach nfs_lookup_verify_inode to handle LOOKUP_RCU
  NFS: teach nfs_neg_need_reval to understand LOOKUP_RCU
  NFS: support RCU_WALK in nfs_permission()
  sunrpc/auth: allow lockless (rcu) lookup of credential cache.
  NFS: prepare for RCU-walk support but pushing tests later in code.
  NFS: nfs4_lookup_revalidate: only evaluate parent if it will be used.
  NFS: add checks for returned value of try_module_get()
  nfs: clear_request_commit while holding i_lock
  pnfs: add pnfs_put_lseg_async
  pnfs: find swapped pages on pnfs commit lists too
  nfs: fix comment and add warn_on for PG_INODE_REF
  nfs: check wait_on_bit_lock err in page_group_lock
  sunrpc: remove "ec" argument from encrypt_v2 operation
  sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
  sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
  ...

Pull xfs update from Dave Chinner:
 "This update contains:
   - conversion of the XFS core to pass negative error numbers
   - restructing of core XFS code that is shared with userspace to
     fs/xfs/libxfs
   - introduction of sysfs interface for XFS
   - bulkstat refactoring
   - demand driven speculative preallocation removal
   - XFS now always requires 64 bit sectors to be configured
   - metadata verifier changes to ensure CRCs are calculated during log
     recovery
   - various minor code cleanups
   - miscellaneous bug fixes

  The diffstat is kind of noisy because of the restructuring of the code
  to make kernel/userspace code sharing simpler, along with the XFS wide
  change to use the standard negative error return convention (at last!)"

* tag 'xfs-for-linus-3.17-rc1' of git://oss.sgi.com/xfs/xfs: (45 commits)
  xfs: fix coccinelle warnings
  xfs: flush both inodes in xfs_swap_extents
  xfs: fix swapext ilock deadlock
  xfs: kill xfs_vnode.h
  xfs: kill VN_MAPPED
  xfs: kill VN_CACHED
  xfs: kill VN_DIRTY()
  xfs: dquot recovery needs verifiers
  xfs: quotacheck leaves dquot buffers without verifiers
  xfs: ensure verifiers are attached to recovered buffers
  xfs: catch buffers written without verifiers attached
  xfs: avoid false quotacheck after unclean shutdown
  xfs: fix rounding error of fiemap length parameter
  xfs: introduce xfs_bulkstat_ag_ichunk
  xfs: require 64-bit sector_t
  xfs: fix uflags detection at xfs_fs_rm_xquota
  xfs: remove XFS_IS_OQUOTA_ON macros
  xfs: tidy up xfs_set_inode32
  xfs: allow inode allocations in post-growfs disk space
  xfs: mark xfs_qm_quotacheck as static
  ...

Pull quota, reiserfs, UDF updates from Jan Kara:
 "Scalability improvements for quota, a few reiserfs fixes, and couple
  of misc cleanups (udf, ext2)"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: Fix use after free in journal teardown
  reiserfs: fix corruption introduced by balance_leaf refactor
  udf: avoid redundant memcpy when writing data in ICB
  fs/udf: re-use hex_asc_upper_{hi,lo} macros
  fs/quota: kernel-doc warning fixes
  udf: use linux/uaccess.h
  fs/ext2/super.c: Drop memory allocation cast
  quota: remove dqptr_sem
  quota: simplify remove_inode_dquot_ref()
  quota: avoid unnecessary dqget()/dqput() calls
  quota: protect Q_GETFMT by dqonoff_mutex

Pull Ceph updates from Sage Weil:
 "There is a lot of refactoring and hardening of the libceph and rbd
  code here from Ilya that fix various smaller bugs, and a few more
  important fixes with clone overlap.  The main fix is a critical change
  to the request_fn handling to not sleep that was exposed by the recent
  mutex changes (which will also go to the 3.16 stable series).

  Yan Zheng has several fixes in here for CephFS fixing ACL handling,
  time stamps, and request resends when the MDS restarts.

  Finally, there are a few cleanups from Himangi Saraogi based on
  Coccinelle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
  libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
  rbd: remove extra newlines from rbd_warn() messages
  rbd: allocate img_request with GFP_NOIO instead GFP_ATOMIC
  rbd: rework rbd_request_fn()
  ceph: fix kick_requests()
  ceph: fix append mode write
  ceph: fix sizeof(struct tYpO *) typo
  ceph: remove redundant memset(0)
  rbd: take snap_id into account when reading in parent info
  rbd: do not read in parent info before snap context
  rbd: update mapping size only on refresh
  rbd: harden rbd_dev_refresh() and callers a bit
  rbd: split rbd_dev_spec_update() into two functions
  rbd: remove unnecessary asserts in rbd_dev_image_probe()
  rbd: introduce rbd_dev_header_info()
  rbd: show the entire chain of parent images
  ceph: replace comma with a semicolon
  rbd: use rbd_segment_name_free() instead of kfree()
  ceph: check zero length in ceph_sync_read()
  ceph: reset r_resend_mds after receiving -ESTALE
  ...

Pull UBI/UBIFS changes from Artem Bityutskiy:
 "No significant changes, mostly small fixes here and there.  The more
  important fixes are:

   - UBI deleted list items while iterating the list with
     'list_for_each_entry'
   - The UBI block driver did not work properly with very large UBI
     volumes"

* tag 'upstream-3.17-rc1' of git://git.infradead.org/linux-ubifs: (21 commits)
  UBIFS: Add log overlap assertions
  Revert "UBIFS: add a log overlap assertion"
  UBI: bugfix in ubi_wl_flush()
  UBI: block: Avoid disk size integer overflow
  UBI: block: Set disk_capacity out of the mutex
  UBI: block: Make ubiblock_resize return something
  UBIFS: add a log overlap assertion
  UBIFS: remove unnecessary check
  UBIFS: remove mst_mutex
  UBIFS: kernel-doc warning fix
  UBI: init_volumes: Ignore volumes with no LEBs
  UBIFS: replace seq_printf by seq_puts
  UBIFS: replace count*size kzalloc by kcalloc
  UBIFS: kernel-doc warning fix
  UBIFS: fix error path in create_default_filesystem()
  UBIFS: fix spelling of "scanned"
  UBIFS: fix some comments
  UBIFS: remove useless @ecc in struct ubifs_scan_leb
  UBIFS: remove useless statements
  UBIFS: Add missing break statements in dbg_chk_pnode()
  ...

If do_journal_release() races with do_journal_end() which requeues
delayed works for transaction flushing, we can leave work items for
flushing outstanding transactions queued while freeing them. That
results in use after free and possible crash in run_timers_softirq().

Fix the problem by not requeueing works if superblock is being shut down
(MS_ACTIVE not set) and using cancel_delayed_work_sync() in
do_journal_release().

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>

Christopher reports that perf_event_print_debug() can crash in uniprocessor
builds.  The crash is due to pcr_ops being NULL.

This happens because pcr_arch_init() is only invoked by smp_cpus_done() which
only executes in SMP builds.

init_hw_perf_events() is closely intertwined with pcr_ops being setup properly,
therefore:

1) Call pcr_arch_init() early on from init_hw_perf_events(), instead of
   from smp_cpus_done().

2) Do not hook up a PMU type if pcr_ops is NULL after pcr_arch_init().

3) Move init_hw_perf_events to a later initcall so that it we will be
   sure to invoke pcr_arch_init() after all cpus are brought up.

Finally, guard the one naked sequence of pcr_ops dereferences in
__global_pmu_self() with an appropriate NULL check.
Reported-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

nmi_cpu_busy() is a SMP function call that just makes sure that all of the
cpus are spinning using cpu cycles while the NMI test runs.

It does not need to disable IRQs because we just care about NMIs executing
which will even with 'normal' IRQs disabled.

It is not legal to enable hard IRQs in a SMP cross call, in fact this bug
triggers the BUG check in irq_work_run_list():

	BUG_ON(!irqs_disabled());

Because now irq_work_run() is invoked from the tail of
generic_smp_call_function_single_interrupt().
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bcmgenet: Wake-on-LAN and suspend fixes

This patch series fixes some mistakes that were introduced during the driver
changes adding support suspend/resume and Wake-on-LAN.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In case we configured the adapter to be a wake up source from
Wake-on-LAN, but we never actually woke up using Wake-on-LAN, we will
leave the adapter in MagicPacket matching mode, which prevents any other
type of packets from reaching the RX engine. Fix this by calling
bcmgenet_power_up() with GENET_POWER_WOL_MAGIC to restore the adapter
configuration in bcmgenet_resume().

The second problem we had was an imbalanced clock disabling in
bcmgenet_wol_resume(), the Wake-on-LAN slow clock is only enabled in
bcmgenet_suspend() if we configured Wake-on-LAN, yet we unconditionally
disabled the clock in bcmgenet_wol_resume().

Fixes: 8c90db72 ("net: bcmgenet: suspend and resume from Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we bring the interface down, phy_stop() will schedule the PHY state
machine to call our link adjustment callback. By the time we do so, we
may have clock gated off the GENET hardware block, and this will cause
bus errors to happen in bcmgenet_mii_setup():

Make sure that we only touch the UMAC_CMD register when there is an
actual link. This is safe to do for two reasons:

- updating the Ethernet MAC registers only make sense when a physical
  link is present
- the PHY library state machine first set phydev->link = 0 before
  invoking phydev->adjust_link in the PHY_HALTED case

Fixes: 24052408 ("net: bcmgenet: only update UMAC_CMD if something changed")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure that we properly suspend and resume the PHY device when we
enter low power modes. We had two calls to bcmgenet_mii_reset() which
will issue a software-reset to the PHY without using the PHY library,
get rid of them since they are completely bogus and mess up with the PHY
library state. Make sure that we reset the PHY library cached values
(link, pause and duplex) to allow the link adjustment callback to be
invoked when needed.

Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks")
Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcmgenet_set_hw_params() will read the hardware version and compare it
with the one we are getting from Device Tree. Due to the clock being
enabled too late, bcmgenet_set_hw_params() will cause bus errors since
the GENET hardware block is still gated off by the time
bcmgenet_set_hw_params() is called, this will also make us fail the
version check since we will read the value 0 from the hardware.

Fix this by requesting the clock before the first piece of code that
needs to access hardware register.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added a guaranteed null-terminate after call to strncpy.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a long known problem with the netfront/netback interface: if the guest
tries to send a packet which constitues more than MAX_SKB_FRAGS + 1 ring slots,
it gets dropped. The reason is that netback maps these slots to a frag in the
frags array, which is limited by size. Having so many slots can occur since
compound pages were introduced, as the ring protocol slice them up into
individual (non-compound) page aligned slots. The theoretical worst case
scenario looks like this (note, skbs are limited to 64 Kb here):
linear buffer: at most PAGE_SIZE - 17 * 2 bytes, overlapping page boundary,
using 2 slots
first 15 frags: 1 + PAGE_SIZE + 1 bytes long, first and last bytes are at the
end and the beginning of a page, therefore they use 3 * 15 = 45 slots
last 2 frags: 1 + 1 bytes, overlapping page boundary, 2 * 2 = 4 slots
Although I don't think this 51 slots skb can really happen, we need a solution
which can deal with every scenario. In real life there is only a few slots
overdue, but usually it causes the TCP stream to be blocked, as the retry will
most likely have the same buffer layout.
This patch solves this problem by linearizing the packet. This is not the
fastest way, and it can fail much easier as it tries to allocate a big linear
area for the whole packet, but probably easier by an order of magnitude than
anything else. Probably this code path is not touched very frequently anyway.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Paul Durrant <paul.durrant@citrix.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for specifying the phy to be used with the fec in the
devicetree using the standard phy-handle property and also supports
fixed-link.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

spin_is_locked() always return false in uniprocessor configuration and therefore it
would be advise to repalce with WARN_ON_SMP().
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the patch called "xen-netback: Turn off the carrier if the guest is not able
to receive" NAPI was descheduled when the carrier was set off. That's
not what most of the drivers do, and we don't have any specific reason to do so
as well, so revert that change.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

 * Enforce CONFIG_RELOCATABLE for the x86 EFI boot stub, otherwise
   it's possible to overwrite random pieces of unallocated memory during
   kernel decompression, leading to machine resets.

Resolved Conflicts:
	arch/x86/Kconfig
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Current upstream kernel hangs with mips and powerpc targets in
uniprocessor mode if SECCOMP is configured.

Bisect points to commit dbd95212 ("seccomp: introduce writer locking").
Turns out that code such as
	BUG_ON(!spin_is_locked(&list_lock));
can not be used in uniprocessor mode because spin_is_locked() always
returns false in this configuration, and that assert_spin_locked()
exists for that very purpose and must be used instead.

Fixes: dbd95212 ("seccomp: introduce writer locking")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kees Cook <keescook@chromium.org>

In the Makefile, qlcnic_minidump.o is included twice in the list of
object files linked into qlcnic.o.

This change removes the superfluous include.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Linux kernel coding style guidelines suggest not using typedefs
for structure types. This patch gets rid of the typedefs for
port_t, card_status_t and card_t. Also, the names of the structs
are changed to drop the _t, to make the name look less typedef-like.

The following Coccinelle semantic patch detects two cases and a
similar one detects the case for card_t.

@tn1@
type td;
@@

typedef struct { ... } td;

@script:python tf@
td << tn1.td;
tdres;
@@

coccinelle.tdres = td;

@@
type tn1.td;
identifier tf.tdres;
@@

-typedef
 struct
+  tdres
   { ... }
-td
 ;

@@
type tn1.td;
identifier tf.tdres;
@@

-td
+ struct tdres
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support for Atari EtherNEC ROM port adapters in ne.c
Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added a guaranteed null-terminate after call to strncpy.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: David S. Miller <davem@davemloft.net>