- 15 May, 2018 7 commits
-
-
Steve Wise authored
Remove sq/rq wr_id attributes because typically they are pointers and we don't want to pass up kernel pointers. Fixes: 056f9c7f ("iw_cxgb4: dump detailed driver-specific QP information") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Steve Wise authored
Remove mr iova attribute because we don't want to pass up kernel pointers. Fixes: fccec5b8 ("RDMA/nldev: provide detailed MR information") Signed-off-by:
-
Steve Wise authored
Fixes: 056f9c7f ("iw_cxgb4: dump detailed driver-specific QP information") Signed-off-by:
-
Doug Ledford authored
During this merge window, we added support for addition RDMA netlink operations. Unfortunately, we added the items in the middle of our uapi enum. Fix that before final release. Fixes: da5c8507 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Doug Ledford authored
A recent patch set to rework the usage of debugfs and to add fault injection capabilities via debugfs files to the hfi1 driver introduced a build error that only shows up when debugfs is fully disabled. The patchset mistakenly defines some empty stub functions in two different headers when debugfs is disabled. Remove the set that shouldn't have been there to resolve the issue. Fixes: a74d5307 ("IB/hfi1: Rework fault injection machinery") Signed-off-by:
-
Ben Hutchings authored
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a pointer, which is expressed as a dependency on !64BIT || ARCH_DMA_ADDR_T_64BIT. For parisc64 this is not true, and if these IB modules are enabled, kconfig warns: WARNING: unmet direct dependencies detected for DMA_VIRT_OPS Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT) Selected by [m]: - INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y] - RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m] Add dependencies to fix this. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Doug Ledford authored
Merge tag 'mlx5-updates-2018-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next mlx5-updates-2018-05-07 mlx5 core driver misc cleanups and updates: - fix spelling mistake: "modfiy" -> "modify" - Cleanup unused field in Work Queue parameters - dump_command mailbox length printed - Refactor num of blocks in mailbox calculation - Decrease level of prints about non-existent MKEY - remove some extraneous spaces in indentations Pulling the same update already pulled into net-next by Dave Miller. Signed-off-by:
-
- 09 May, 2018 18 commits
-
-
Brian Welty authored
Moving receive-side WQE allocation logic into rdmavt will allow further code reuse between qib and hfi1 drivers. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Brian Welty <brian.welty@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
Currently the driver doesn't support completion vectors. These are used to indicate which sets of CQs should be grouped together into the same vector. A vector is a CQ processing thread that runs on a specific CPU. If an application has several CQs bound to different completion vectors, and each completion vector runs on different CPUs, then the completion queue workload is balanced. This helps scale as more nodes are used. Implement CQ completion vector support using a global workqueue where a CQ entry is queued to the CPU corresponding to the CQ's completion vector. Since the workqueue is global, it's guaranteed to always be there when queueing CQ entries; Therefore, the RCU locking for cq->rdi->worker in the hot path is superfluous. Each completion vector is assigned to a different CPU. The number of completion vectors available is computed by taking the number of online, physical CPUs from the local NUMA node and subtracting the CPUs used for kernel receive queues and the general interrupt. Special use cases: * If there are no CPUs left for completion vectors, the same CPU for the general interrupt is used; Therefore, there would only be one completion vector available. * For multi-HFI systems, the number of completion vectors available for each device is the total number of completion vectors in the local NUMA node divided by the number of devices in the same NUMA node. If there's a division remainder, the first device to get initialized gets an extra completion vector. Upon a CQ creation, an invalid completion vector could be specified. Handle it as follows: * If the completion vector is less than 0, set it to 0. * Set the completion vector to the result of the passed completion vector moded with the number of device completion vectors available. Reviewed-by:Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
CPU masks are used to keep track of affinity assignments for IRQs and processes. Operations performed on these affinity CPU masks are duplicated throughout the code. Create common functions for affinity CPU mask operations to remove duplicate code. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
All threads queuing CQ entries on different CQs are unnecessarily synchronized by a spin lock to check if the CQ kthread worker hasn't been destroyed before queuing an CQ entry. The lock used in 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") is a device global lock and will have poor performance at scale as completions are entered from a large number of CPUs. Convert to use RCU where the read side of RCU is rvt_cq_enter() to determine that the worker is alive prior to triggering the completion event. Apply write side RCU semantics in rvt_driver_cq_init() and rvt_cq_exit(). Fixes: 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
Kamenee Arumugam authored
When Hfi1 device is unresponsive, reading the RcvArrayCnt register will return all 1's. This value is then used to remap chip's RcvArray. The incorrect all ones value used in remapping RcvArray will cause warn on as shown by trace below: [<ffffffff81685eac>] dump_stack+0x19/0x1b [<ffffffff81085820>] warn_slowpath_common+0x70/0xb0 [<ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff81065c29>] __ioremap_caller+0x279/0x320 [<ffffffff8142873c>] ? _dev_info+0x6c/0x90 [<ffffffffa021d155>] ? hfi1_pcie_ddinit+0x1d5/0x330 [hfi1] [<ffffffff81065d62>] ioremap_wc+0x32/0x40 [<ffffffffa021d155>] hfi1_pcie_ddinit+0x1d5/0x330 [hfi1] [<ffffffffa0204851>] hfi1_init_dd+0x1d1/0x2440 [hfi1] [<ffffffff813503dc>] ? pci_write_config_word+0x1c/0x20 Read CCE revision register first to verify that WFR device is responsive. If the read return "all ones", bail out from init and fail the driver load. Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
-
Mitko Haralanov authored
The packet fault injection code present in the HFI1 driver had some issues which not only fragment the code but also created user confusion. Furthermore, it suffered from the following issues: 1. The fault_packet method only worked for received packets. This meant that the only fault injection mode available for sent packets is fault_opcode, which did not allow for random packet drops on all egressing packets. 2. The mask available for the fault_opcode mode did not really work due to the fact that the opcode values are not bits in a bitmask but rather sequential integer values. Creating a opcode/mask pair that would successfully capture a set of packets was nearly impossible. 3. The code was fragmented and used too many debugfs entries to operate and control. This was confusing to users. 4. It did not allow filtering fault injection on a per direction basis - egress vs. ingress. In order to improve or fix the above issues, the following changes have been made: 1. The fault injection methods have been combined into a single fault injection facility. As such, the fault injection has been plugged into both the send and receive code paths. Regardless of method used the fault injection will operate on both egress and ingress packets. 2. The type of fault injection - by packet or by opcode - is now controlled by changing the boolean value of the file "opcode_mode". When the value is set to True, fault injection is done by opcode. Otherwise, by packet. 2. The masking ability has been removed in favor of a bitmap that holds opcodes of interest (one bit per opcode, a total of 256 bits). This works in tandem with the "opcode_mode" value. When the value of "opcode_mode" is False, this bitmap is ignored. When the value is True, the bitmap lists all opcodes to be considered for fault injection. By default, the bitmap is empty. When the user wants to filter by opcode, the user sets the corresponding bit in the bitmap by echo'ing the bit position into the 'opcodes' file. This gets around the issue that the set of opcodes does not lend itself to effective masks and allow for extremely fine-grained filtering by opcode. 4. fault_packet and fault_opcode methods have been combined. Hence, there is only one debugfs directory controlling the entire operation of the fault injection machinery. This reduces the number of debugfs entries and provides a more unified user experience. 5. A new control files - "direction" - is provided to allow the user to control the direction of packets, which are subject to fault injection. 6. A new control file - "skip_usec" - is added that would allow the user to specify a "timeout" during which no fault injection will occur. In addition, the following bug fixes have been applied: 1. The fault injection code has been split into its own header and source files. This was done to better organize the code and support conditional compilation without littering the code with #ifdef's. 2. The method by which the TX PIO packets were being marked for drop conflicted with the way send contexts were being setup. As a result, the send context was repeatedly being reset. 3. The fault injection only makes sense when the user can control it through the debugfs entries. However, a kernel configuration can enable fault injection but keep fault injection debugfs entries disabled. Therefore, it makes sense that the HFI fault injection code depends on both. 4. Error suppression did not take into account the method by which PIO packets were being dropped. Therefore, even with error suppression turned on, errors would still be displayed to the screen. A larger enough packet drop percentage would case the kernel to crash because the driver would be stuck printing errors. Reviewed-by:Don Hiatt <don.hiatt@intel.com> Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Alex Estrin authored
A warm restart will fail to unload the driver, leaving link state potentially flapping up to the point the BIOS resets the adapter. Correct the issue by hooking the shutdown pci method, which will bring port down. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
User send context integrity bits are cleared before the context is disabled. If the send context is still processing data, any packets that need those integrity bits will cause an error and halt the send context. During the disable handling, the driver waits for the context to drain. If the context is halted, the driver will eventually timeout because the context won't drain and then incorrectly bounce the link. Reorder the bit clearing and the context disable. Examine the software state and send context status as well as the egress status to determine if a send context is in the halted state. Promote the check macros to static functions for consistency with the new check and to follow kernel style. Remove an unused define that refers to the egress timeout. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
-
Michael J. Ruhl authored
The driver_pstate() function is used to map internal driver state information to externally defined states. The VERIFY_CAP and GOING_UP states are config/training states, but the mapping routing returns the POLLING value. Update the return values for VERIFY_CAP and GOING_UP to return the correct value: TRAINING. Reviewed-by:
-
Mike Marciniszyn authored
There are config dependent code paths that expose panics in unload paths both in this file and in debugfs_remove_recursive() because CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be set independently. Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS reset causes fault_create_debugfs_attr() to return an error. The debugfs.c routines tolerate failures, but the module unload panics dereferencing a NULL in the two exit routines. If that is fixed, the dir passed to debugfs_remove_recursive comes from a memory location that was freed and potentially reused causing a segfault or corrupting memory. Here is an example of the NULL deref panic: [66866.286829] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 [66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] [66866.301138] PGD 858496067 P4D 858496067 PUD 8433a7067 PMD 0 [66866.307452] Oops: 0000 [#1] SMP [66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic] [66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2 [66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [66866.405252] task: ffff88084f28c380 task.stack: ffffc90008454000 [66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] [66866.417984] RSP: 0018:ffffc90008457da0 EFLAGS: 00010202 [66866.423812] RAX: 0000000000000000 RBX: ffff880857de0000 RCX: 0000000180040001 [66866.431773] RDX: 0000000180040002 RSI: ffffea0021088200 RDI: 0000000040000000 [66866.439734] RBP: ffffc90008457da8 R08: ffff88084220e000 R09: 0000000180040001 [66866.447696] R10: 000000004220e001 R11: ffff88084220e000 R12: ffff88085a31c000 [66866.455657] R13: ffffffffa07c9820 R14: ffffffffa07c9890 R15: ffff881059d78100 [66866.463618] FS: 00007f6876047740(0000) GS:ffff88085f800000(0000) knlGS:0000000000000000 [66866.472644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66866.479053] CR2: 0000000000000088 CR3: 0000000856357006 CR4: 00000000001606e0 [66866.487013] Call Trace: [66866.489747] remove_one+0x1f/0x220 [hfi1] [66866.494221] pci_device_remove+0x39/0xc0 [66866.498596] device_release_driver_internal+0x141/0x210 [66866.504424] driver_detach+0x3f/0x80 [66866.508409] bus_remove_driver+0x55/0xd0 [66866.512784] driver_unregister+0x2c/0x50 [66866.517164] pci_unregister_driver+0x2a/0xa0 [66866.521934] hfi1_mod_cleanup+0x10/0xaa2 [hfi1] [66866.526988] SyS_delete_module+0x171/0x250 [66866.531558] do_syscall_64+0x67/0x1b0 [66866.535644] entry_SYSCALL64_slow_path+0x25/0x25 [66866.540792] RIP: 0033:0x7f6875525c27 [66866.544777] RSP: 002b:00007ffd48528e78 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [66866.553224] RAX: ffffffffffffffda RBX: 0000000001cc01d0 RCX: 00007f6875525c27 [66866.561185] RDX: 00007f6875596000 RSI: 0000000000000800 RDI: 0000000001cc0238 [66866.569146] RBP: 0000000000000000 R08: 00007f68757e9060 R09: 00007f6875596000 [66866.577120] R10: 00007ffd48528c00 R11: 0000000000000206 R12: 00007ffd48529db4 [66866.585080] R13: 0000000000000000 R14: 0000000001cc01d0 R15: 0000000001cc0010 [66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e [66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP: ffffc90008457da0 [66866.621885] CR2: 0000000000000088 [66866.625618] ---[ end trace c4817425783fb092 ]--- Fix by insuring that upon failure from fault_create_debugfs_attr() the parent pointer for the routines is always set to NULL and guards added in the exit routines to insure that debugfs_remove_recursive() is not called when when the parent pointer is NULL. Fixes: 0181ce31 ("IB/hfi1: Add receive fault injection feature") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
Alex Estrin authored
For lid routed packets 'hop_cnt' is zero, therefore current test is incomplete. Fix it by using local mad check for both lid routed and direct routed MADs. Reviewed-by:
-
Michael J. Ruhl authored
A failure of program_rcvarray() is treated inconsistently by the calling function. In one case the error is returned, in a second case, the error is overwritten with EFAULT. In both cases the code path is doing the same thing, allocating memory for groups, so it should be consistent. Make the error path consistent and return the error generated by program_rcvarray(). Reviewed-by:
-
Sebastian Sanchez authored
When the LCB isn't able to get any lanes operational on the first transition into mission mode, the link transfer active never happens and the LNI stays in the polling state indefinitely. Reset LCB upon receiving an 8051 interrupt for LCB to try to obtain lanes with firmware version 1.25.0 or later. Also, update the LCB reset value in other parts of the code with a macro defined to make the code more maintainable and rename functions with the link_width label to link_mode to reflect the fact that those functions set and read link related data not just the link width. Reviewed-by:
-
Doug Ledford authored
Several items of conflict have arisen between the RDMA stack's for-rc branch and upcoming for-next work: 9fd4350b ("IB/rxe: avoid double kfree_skb") directly conflicts with 2e473507 ("IB/rxe: optimize the function duplicate_request") Patches already submitted by Intel for the hfi1 driver will fail to apply cleanly without this merge Other people on the mailing list have notified that their upcoming patches also fail to apply cleanly without this merge Signed-off-by:
-
Idan Burstein authored
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default "register_always=Y" mode) registers and invalidates user buffer upon each IO. Today the mlx5 driver is posting the registration work request using scatter/gather entry for the MTT/KLM list. The fetch of the MTT/KLM list becomes the bottleneck in number of IO operation could be done by NVMe over Fabrics host driver on a single adapter as shown below. This patch is adding the support for inline registration work request upon MTT/KLM list of size <=64B. The result for NVMe over Fabrics is increase of > x3.5 for small IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA) performance to be enhanced as well. The following results were taken against a single NVMe-oF (RoCE link layer) subsystem with a single namespace backed by null_blk using fio benchmark (with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1): ConnectX-5 (pci Width x16) --------------------------- Block Size s/g reg_wr inline reg_wr ++++++++++ +++++++++++++++ ++++++++++++++++ 512B 1302.8K/34.82% 4951.9K/99.02% 1KB 1284.3K/33.86% 4232.7K/98.09% 2KB 1238.6K/34.1% 2797.5K/80.04% 4KB 1169.3K/32.46% 1941.3K/61.35% 8KB 1013.4K/30.08% 1236.6K/39.47% 16KB 695.7K/20.19% 696.9K/20.59% 32KB 350.3K/9.64% 350.6K/10.3% 64KB 175.86K/5.27% 175.9K/5.28% ConnectX-4 (pci Width x8) --------------------------- Block Size s/g reg_wr inline reg_wr ++++++++++ +++++++++++++++ ++++++++++++++++ 512B 1285.8K/42.66% 4242.7K/98.18% 1KB 1254.1K/41.74% 3569.2K/96.00% 2KB 1185.9K/39.83% 2173.9K/75.58% 4KB 1069.4K/36.46% 1343.3K/47.47% 8KB 755.1K/27.77% 748.7K/29.14% Tested-by:Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by:
Idan Burstein <idanb@mellanox.com> Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The zgid is already provided by IB/core, so there is no need in locally defined variable, let's drop it and reuse common one. Signed-off-by:
-
Parav Pandit authored
_gid_table_setup_one() only performs GID table cache memory allocation, marks entries as invalid (free) and marks the reserved entries. At this point GID table is empty and no entries are added. On dual port device if _gid_table_setup_one() fails to allocate the gid table for 2nd port, there is no need to perform cleanup_gid_table_port() to delete GID entries, as GID table is empty. Therefore make use of existing gid_table_release_one() routine which frees the GID table memory and avoid code duplication. Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
gid_table_reserve_default() always returns zero. Make it return void and simplify error checking. rdma_port is already calculated, use that while calling gid_table_reserve_default() instead of recalculating it. Reviewed-by:
-
- 04 May, 2018 5 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_warn warning message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
Remove the 'linear' field from struct mlx5_wq_param. It is redundant, set but never read. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Dump command mailbox length printed was correct only if data_only flag was set. For the case that data_only flag was clear the offset to stop printing at was wrong and so the buffer printed was too short. Changed the print loop to stop according to number of buffers in mailbox. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Get the logic that calculates the number of blocks in a command mailbox into a dedicated function. Signed-off-by:
-
Leon Romanovsky authored
User-controlled application can cause multiple prints as below to flood dmesg. Since knowledge of failed MKey release is important for debug, let's decrease its level to debug. mlx5_core 0000:00:04.0: mlx5_core_destroy_mkey:127:(pid 2352): failed radix tree delete of mkey 0x1ed700 Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
- 03 May, 2018 10 commits
-
-
Steve Wise authored
Provide a cxgb4-specific function to fill in qp state details. This allows dumping important c4iw_qp state useful for debugging. Included in the dump are the t4_sq, t4_rq structs, plus a dump of the t4_swsqe and t4swrqe descriptors for the first and last pending entries. Signed-off-by:
-
Steve Wise authored
These help rdma drivers to fill out the driver entries. Signed-off-by:
-
Steve Wise authored
Each driver can register a "fill entry" function with the restrack core. This function will be called when filling out a resource, allowing the driver to add driver-specific details. The details consist of a nltable of nested attributes, that are in the form of <key, [print-type], value> tuples. Both key and value attributes are mandatory. The key nlattr must be a string, and the value nlattr can be one of the driver attributes that are generic, but typed, allowing the attributes to be validated. Currently the driver nlattr types include string, s32, u32, s64, and u64. The print-type nlattr allows a driver to specify an alternative display format for user tools displaying the attribute. For example, a u32 attribute will default to "%u", but a print-type attribute can be included for it to be displayed in hex. This allows the user tool to print the number in the format desired by the driver driver. More attrs can be defined as they become needed by drivers. Signed-off-by:
-
Steve Wise authored
Add a specific RDMA_NLDEV_ATTR_PAD attribute to be used for 64b attribute padding. To preserve the ABI, make this attribute equal to RDMA_NLDEV_ATTR_UNSPEC, which has a value of 0, because that has been used up until now as the pad attribute. Change all the previous use of 0 as the pad with this new enum. Signed-off-by:
-
Parav Pandit authored
When commit [1] was added, SGID was queried to derive the SMAC address. Then, later on during a refactor [2], SMAC was no longer needed. However, the now useless GID query remained. Then during additional code changes later on, the GID query was being done in such a way that it caused iWARP queries to start breaking. Remove the useless GID query and resolve the iWARP breakage at the same time. This is discussed in [3]. [1] commit dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures") [2] commit 5c266b23 ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av") [3] https://www.spinics.net/lists/linux-rdma/msg63951.htmlSuggested-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Jack Morgenstein authored
When the kernel was compiled using the UBSAN option, we saw the following stack trace: [ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27 [ 1184.828114] signed integer overflow: [ 1184.828247] -2147483648 - 1 cannot be represented in type 'int' The problem was caused by calling round_up in procedure mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack trace) with the second parameter (1 << block_shift) (which is an int). The second parameter should have been (1ULL << block_shift) (which is an unsigned long long). (1 << block_shift) is treated by the compiler as an int (because 1 is an integer). Now, local variable block_shift is initialized to 31. If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368. This is the most negative int value. Inside the round_up macro, there is a cast applied to ((1 << 31) - 1). However, this cast is applied AFTER ((1 << 31) - 1) is calculated. Since (1 << 31) is treated as an int, we get the negative overflow identified by UBSAN in the process of calculating ((1 << 31) - 1). The fix is to change (1 << block_shift) to (1ULL << block_shift) on line 349. Fixes: 9901abf5 ("IB/mlx4: Use optimal numbers of MTT entries") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Sebastian Sanchez authored
When IRQ affinity is set and the interrupt type is unknown, a cpu mask allocated within the function is never freed. Fix this memory leak by allocating memory within the scope where it is used. Reviewed-by:
-
Sebastian Sanchez authored
When allocating device data, if there's an allocation failure, the already allocated memory won't be freed such as per-cpu counters. Fix memory leaks in exception path by creating a common reentrant clean up function hfi1_clean_devdata() to be used at driver unload time and device data allocation failure. To accomplish this, free_platform_config() and clean_up_i2c() are changed to be reentrant to remove dependencies when they are called in different order. This helps avoid NULL pointer dereferences introduced by this patch if those two functions weren't reentrant. In addition, set dd->int_counter, dd->rcv_limit, dd->send_schedule and dd->tx_opstats to NULL after they're freed in hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant. Reviewed-by:
-
Sebastian Sanchez authored
When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
-
Mike Marciniszyn authored
AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2). When the code is trying to send a BECN, the use of the stored header will lose the BECN bit. Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations. Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
