- 13 Nov, 2014 40 commits
-
-
Darrick J. Wong authored
commit a0626e75 upstream. When loading extended attributes, check each entry's value offset to make sure it doesn't collide with the entries. Without this check it is easy to crash the kernel by mounting a malicious FS containing a file with an EA wherein e_value_offs = 0 and e_value_size > 0 and then deleting the EA, which corrupts the name list. (See the f_ea_value_crash test's FS image in e2fsprogs for an example.) Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Darrick J. Wong authored
commit 064d8389 upstream. Free the buffer head if the journal descriptor block fails checksum verification. This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum verify error in do_one_pass". Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Marc-André Lureau authored
commit c572aaf4 upstream. Limit primary to qemu vgamem size, to avoid reaching qemu guest bug "requested primary larger than framebuffer" on resizing screen too large to fit. Remove unneeded and misleading variables. Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1127552Signed-off-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
David Daney authored
commit 9e0f162a upstream. In commit 8393c524 (MIPS: tlbex: Fix a missing statement for HUGETLB), the TLB Refill handler was fixed so that non-OCTEON targets would work properly with huge pages. The change was incorrect in that it broke the OCTEON case. The problem is shown here: xxx0: df7a0000 ld k0,0(k1) . . . xxxc0: df610000 ld at,0(k1) xxxc4: 335a0ff0 andi k0,k0,0xff0 xxxc8: e825ffcd bbit1 at,0x5,0x0 xxxcc: 003ad82d daddu k1,at,k0 . . . In the non-octeon case there is a destructive test for the huge PTE bit, and then at 0, $k0 is reloaded (that is what the 8393c524 patch added). In the octeon case, we modify k1 in the branch delay slot, but we never need k0 again, so the new load is not needed, but since k1 is modified, if we do the load, we load from a garbage location and then get a nested TLB Refill, which is seen in userspace as either SIGBUS or SIGSEGV (depending on the garbage). The real fix is to only do this reloading if it is needed, and never where it is harmful. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8151/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Markos Chandras authored
commit aedd153f upstream. Code before the .fixup section needs to have the .insn directive. This has no side effects on MIPS32/64 but it affects the way microMIPS loads the address for the return label. Fixes the following build problem: mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-linux-gnu-ld: final link failed: Bad value Makefile:819: recipe for target 'vmlinux' failed The fix is similar to 1658f914 ("MIPS: microMIPS: Disable LL/SC and fix linker bug.") Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8117/Signed-off-by:
-
Nicholas Bellinger authored
commit e2480563 upstream. This patch fixes a bug in handling of SPC-3 PR Activate Persistence across Target Power Loss (APTPL) logic where re-creation of state for MappedLUNs from dynamically generated NodeACLs did not occur during I_T Nexus establishment. It adds the missing core_scsi3_check_aptpl_registration() call during core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in order to replay any pre-loaded APTPL metadata state associated with the newly connected SCSI Initiator Port. Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Quinn Tran authored
commit 082f58ac upstream. During temporary resource starvation at lower transport layer, command is placed on queue full retry path, which expose this problem. The TCM queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same cmd twice to lower layer. The 1st time led to cmd normal free path. The 2nd time cause Null pointer access. This regression bug was originally introduced v3.1-rc code in the following commit: commit e057f533 Author: Christoph Hellwig <hch@infradead.org> Date: Mon Oct 17 13:56:41 2011 -0400 target: remove the transport_qf_callback se_cmd callback Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Joern Engel authored
commit f4c24db1 upstream. The code is currently riddled with "drop the hardware_lock to avoid a deadlock" bugs that expose races. One of those races seems to expose a valid warning in tcm_qla2xxx_clear_nacl_from_fcport_map. Add some bandaid to it. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
-
Vineet Gupta authored
commit c3441edd upstream. -Pass the expected arg to non-boot park'ing routine (It worked so far because existing SMP backends don't use the arg) -CONFIG_DEBUG_PREEMPT warning Signed-off-by:
-
Petr Matousek authored
commit a642fc30 upstream. On systems with invvpid instruction support (corresponding bit in IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid causes vm exit, which is currently not handled and results in propagation of unknown exit to userspace. Fix this by installing an invvpid vm exit handler. This is CVE-2014-3646. Signed-off-by:
Petr Matousek <pmatouse@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Nadav Amit authored
commit 234f3ce4 upstream. Before changing rip (during jmp, call, ret, etc.) the target should be asserted to be canonical one, as real CPUs do. During sysret, both target rsp and rip should be canonical. If any of these values is noncanonical, a #GP exception should occur. The exception to this rule are syscall and sysenter instructions in which the assigned rip is checked during the assignment to the relevant MSRs. This patch fixes the emulator to behave as real CPUs do for near branches. Far branches are handled by the next patch. This fixes CVE-2014-3647. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Nadav Amit authored
commit 05c83ec9 upstream. Relative jumps and calls do the masking according to the operand size, and not according to the address size as the KVM emulator does today. This patch fixes KVM behavior. Signed-off-by:
-
Michael S. Tsirkin authored
commit 2bc19dc3 upstream. KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was triggered by a priveledged application. Let's not kill the guest: WARN and inject #UD instead. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Nadav Amit authored
commit 854e8bb1 upstream. Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is written to certain MSRs. The behavior is "almost" identical for AMD and Intel (ignoring MSRs that are not implemented in either architecture since they would anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if non-canonical address is written on Intel but not on AMD (which ignores the top 32-bits). Accordingly, this patch injects a #GP on the MSRs which behave identically on Intel and AMD. To eliminate the differences between the architecutres, the value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to canonical value before writing instead of injecting a #GP. Some references from Intel and AMD manuals: According to Intel SDM description of WRMSR instruction #GP is expected on WRMSR "If the source register contains a non-canonical address and ECX specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE, IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP." According to AMD manual instruction manual: LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical form, a general-protection exception (#GP) occurs." IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the base field must be in canonical form or a #GP fault will occur." IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must be in canonical form." This patch fixes CVE-2014-3610. Signed-off-by:
-
Andy Honig authored
commit 2febc839 upstream. There's a race condition in the PIT emulation code in KVM. In __kvm_migrate_pit_timer the pit_timer object is accessed without synchronization. If the race condition occurs at the wrong time this can crash the host kernel. This fixes CVE-2014-3611. Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
-
Andy Honig authored
commit 8b3c3104 upstream. The previous patch blocked invalid writes directly when the MSR is written. As a precaution, prevent future similar mistakes by gracefulling handle GPs caused by writes to shared MSRs. Signed-off-by:
-
Quentin Casasnovas authored
commit 3d32e4db upstream. The third parameter of kvm_unpin_pages() when called from kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin and not the page size. This error was facilitated with an inconsistent API: kvm_pin_pages() takes a size, but kvn_unpin_pages() takes a number of pages, so fix the problem by matching the two. This was introduced by commit 350b8bdd ("kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of un-pinning for pages intended to be un-pinned (i.e. memory leak) but unfortunately potentially aggravated the number of pages we un-pin that should have stayed pinned. As far as I understand though, the same practical mitigations apply. This issue was found during review of Red Hat 6.6 patches to prepare Ksplice rebootless updates. Thanks to Vegard for his time on a late Friday evening to help me in understanding this code. Fixes: 350b8bdd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)") Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Jamie Iles <jamie.iles@oracle.com> Reviewed-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Axel Lin authored
commit 91ba0e59 upstream. Fix a copy-paste bug when converting to the control framework. Fixes: commit 5d478e0d ("[media] tda7432: convert to the control framework") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Ulrich Eckhardt authored
commit 8c5bcded upstream. The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not automatically power down. This blocks other receivers connected to a satellite channel router (EN50494), since the receivers can not send the required DiSEqC sequences when the Tevii card is connected to a the same SCR. This patch switches off the LNB supply voltage on initialization of the frontend. [mchehab@osg.samsung.com: add a comment about why we're explicitly turning off voltage at device init] Signed-off-by:
Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Frank Schaefer authored
commit 627530c3 upstream. When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Paul Fertser authored
commit 62ea864f upstream. As reported on [1], this device needs this quirk to be able to reliably initialise the webcam. [1] http://ubuntuforums.org/showthread.php?t=2145996 Cc: stable@vger.kernel.org Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Maciej Matraszek authored
commit 3bacc10c upstream. Fix clamp_align() used in v4l_bound_align_image() to prevent overflow when passed large value like UINT32_MAX. In the current implementation: clamp_align(UINT32_MAX, 8, 8192, 3) returns 8, because in line: x = (x + (1 << (align - 1))) & mask; x overflows to (-1 + 4) & 0x7 = 3, while expected value is 8192. v4l_bound_align_image() is heavily used in VIDIOC_S_FMT and VIDIOC_SUBDEV_S_FMT ioctls handlers, and documentation of the latter explicitly states that: "The modified format should be as close as possible to the original request." -- http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-subdev-g-fmt.html Thus one would expect, that passing UINT32_MAX as format width and height will result in setting maximum possible resolution for the device. Particularly, when the driver doesn't support VIDIOC_ENUM_FRAMESIZES ioctl, which is common in the codebase. Fixes changeset: b0d3159bSigned-off-by:
Maciej Matraszek <m.matraszek@samsung.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Ben Skeggs authored
commit 595d373f upstream. Fixes type/mask calculation being based on uninitialised data for VGA outputs. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 1e99cfa8 upstream. The translation from the X driver to the KMS one typo'ed a couple of array indices, causing the HW cursor to look weird (blocky with leaking edge colors). This fixes it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Hans de Goede authored
commit 993b3a3f upstream. These models need i8042.notimeout, otherwise the touchpad will not work. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 9ff84a17 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. https://bugzilla.redhat.com/show_bug.cgi?id=1110011Signed-off-by:
-
Mikulas Patocka authored
commit f74a289b upstream. The framebuffer code uses the current background color to fill the border when switching consoles, however, this results in inconsistent behavior. For example: - start Midnigh Commander - the border is black - switch to another console and switch back - the border is cyan - type something into the command line in mc - the border is cyan - switch to another console and switch back - the border is black - press F9 to go to menu - the border is black - switch to another console and switch back - the border is dark blue When switching to a console with Midnight Commander, the border is random color that was left selected by the slang subsystem. This patch fixes this inconsistency by always using black as the background color when switching consoles. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Prarit Bhargava authored
commit d3051b48 upstream. A panic was seen in the following sitation. There are two threads running on the system. The first thread is a system monitoring thread that is reading /proc/modules. The second thread is loading and unloading a module (in this example I'm using my simple dummy-module.ko). Note, in the "real world" this occurred with the qlogic driver module. When doing this, the following panic occurred: ------------[ cut here ]------------ kernel BUG at kernel/module.c:3739! invalid opcode: 0000 [#1] SMP Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module] CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ #7 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000 RIP: 0010:[<ffffffff810d64c5>] [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP: 0018:ffff88080fa7fe18 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000 FS: 00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00 ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0 Call Trace: [<ffffffff810d666c>] m_show+0x19c/0x1e0 [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0 [<ffffffff812281ed>] proc_reg_read+0x3d/0x80 [<ffffffff811c0f2c>] vfs_read+0x9c/0x170 [<ffffffff811c1a58>] SyS_read+0x58/0xb0 [<ffffffff81605829>] system_call_fastpath+0x16/0x1b Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RIP [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP <ffff88080fa7fe18> Consider the two processes running on the system. CPU 0 (/proc/modules reader) CPU 1 (loading/unloading module) CPU 0 opens /proc/modules, and starts displaying data for each module by traversing the modules list via fs/seq_file.c:seq_open() and fs/seq_file.c:seq_read(). For each module in the modules list, seq_read does op->start() <-- this is a pointer to m_start() op->show() <- this is a pointer to m_show() op->stop() <-- this is a pointer to m_stop() The m_start(), m_show(), and m_stop() module functions are defined in kernel/module.c. The m_start() and m_stop() functions acquire and release the module_mutex respectively. ie) When reading /proc/modules, the module_mutex is acquired and released for each module. m_show() is called with the module_mutex held. It accesses the module struct data and attempts to write out module data. It is in this code path that the above BUG_ON() warning is encountered, specifically m_show() calls static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); ... The other thread, CPU 1, in unloading the module calls the syscall delete_module() defined in kernel/module.c. The module_mutex is acquired for a short time, and then released. free_module() is called without the module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED, also without the module_mutex. Some additional code is called and then the module_mutex is reacquired to remove the module from the modules list: /* Now we can delete it from the lists */ mutex_lock(&module_mutex); stop_machine(__unlink_module, mod, NULL); mutex_unlock(&module_mutex); This is the sequence of events that leads to the panic. CPU 1 is removing dummy_module via delete_module(). It acquires the module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to MODULE_STATE_UNFORMED yet. CPU 0, which is reading the /proc/modules, acquires the module_mutex and acquires a pointer to the dummy_module which is still in the modules list. CPU 0 calls m_show for dummy_module. The check in m_show() for MODULE_STATE_UNFORMED passed for dummy_module even though it is being torn down. Meanwhile CPU 1, which has been continuing to remove dummy_module without holding the module_mutex, now calls free_module() and sets dummy_module->state to MODULE_STATE_UNFORMED. CPU 0 now calls module_flags() with dummy_module and ... static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); and BOOM. Acquire and release the module_mutex lock around the setting of MODULE_STATE_UNFORMED in the teardown path, which should resolve the problem. Testing: In the unpatched kernel I can panic the system within 1 minute by doing while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done and while (true) do cat /proc/modules; done in separate terminals. In the patched kernel I was able to run just over one hour without seeing any issues. I also verified the output of panic via sysrq-c and the output of /proc/modules looks correct for all three states for the dummy_module. dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-) dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE) dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Alexey Khoroshilov authored
commit 56ec16cb upstream. If cn_add_callback() fails in dm_ulog_tfr_init(), it does not deallocate prealloced memory but calls cn_del_callback(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit b8839b8c upstream. The math in both blk_stack_limits() and queue_limit_alignment_offset() assume that a block device's io_min (aka minimum_io_size) is always a power-of-2. Fix the math such that it works for non-power-of-2 io_min. This issue (of alignment_offset != 0) became apparent when testing dm-thinp with a thinp blocksize that matches a RAID6 stripesize of 1280K. Commit fdfb4c8c ("dm thin: set minimum_io_size to pool's data block size") unlocked the potential for alignment_offset != 0 due to the dm-thin-pool's io_min possibly being a non-power-of-2. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Lai Jiangshan authored
commit 82cfb90b upstream. Commit 98683650 "Merge branch 'drbd-8.4_ed6' into for-3.8-drivers-drbd-8.4_ed6" switches to the new augment API, but the new API requires that the tree is augmented before rb_insert_augmented() is called, which is missing. So we add the augment-code to drbd_insert_interval() when it travels the tree up to down before rb_insert_augmented(). See the example in include/linux/interval_tree_generic.h or Documentation/rbtree.txt. drbd_insert_interval() may cancel the insertion when traveling, in this case, the just added augment-code does nothing before cancel since the @this node is already in the subtrees in this case. CC: Michel Lespinasse <walken@google.com> Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Andreas Gruenbacher <agruen@linbit.com> Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
-
Mikulas Patocka authored
commit 0e825862 upstream. When __scan frees the required number of buffer entries that the shrinker requested (nr_to_scan becomes zero) it must return. Before this fix the __scan code exited only the inner loop and continued in the outer loop -- which could result in reduced performance due to extra buffers being freed (e.g. unnecessarily evicted thinp metadata needing to be synchronously re-read into bufio's cache). Also, move dm_bufio_cond_resched to __scan's inner loop, so that iterating the bufio client's lru lists doesn't result in scheduling latency. Reported-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit eb76faf5 upstream. The 'last_accessed' member of the dm_buffer structure was only set when the the buffer was created. This led to each buffer being discarded after dm_bufio_max_age time even if it was used recently. In practice this resulted in all thinp metadata being evicted soon after being read -- this is particularly problematic for metadata intensive workloads like multithreaded small random IO. 'last_accessed' is now updated each time the buffer is moved to the head of the LRU list, so the buffer is now properly discarded if it was not used in dm_bufio_max_age time. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Olaf Hering authored
commit c0c3e735 upstream. qemu as used by xend/xm toolstack uses a different subvendor id. Bind the drm driver also to this emulated card. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Roger Pau Monné authored
commit 61cecca8 upstream. Fix leaking a page when a grant mapping has failed. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reported-and-Tested-by:
Tao Chen <boby.chen@huawei.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 6fbc198c upstream. On restore, virtio pci does the following: + set features + init vqs etc - device can be used at this point! + set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits This is in violation of the virtio spec, which requires the following order: - ACKNOWLEDGE - DRIVER - init vqs - DRIVER_OK This behaviour will break with hypervisors that assume spec compliant behaviour. It seems like a good idea to have this patch applied to stable branches to reduce the support butden for the hypervisors. Cc: Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Stephen Smalley authored
commit 923190d3 upstream. sb_finish_set_opts() can race with inode_free_security() when initializing inode security structures for inodes created prior to initial policy load or by the filesystem during ->mount(). This appears to have always been a possible race, but commit 3dc91d43 ("SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()") made it more evident by immediately reusing the unioned list/rcu element of the inode security structure for call_rcu() upon an inode_free_security(). But the underlying issue was already present before that commit as a possible use-after-free of isec. Shivnandan Kumar reported the list corruption and proposed a patch to split the list and rcu elements out of the union as separate fields of the inode_security_struct so that setting the rcu element would not affect the list element. However, this would merely hide the issue and not truly fix the code. This patch instead moves up the deletion of the list entry prior to dropping the sbsec->isec_lock initially. Then, if the inode is dropped subsequently, there will be no further references to the isec. Reported-by:
Shivnandan Kumar <shivnandan.k@samsung.com> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Valdis Kletnieks authored
commit d4bf205d upstream. The pstore filesystem still creates duplicate filename/inode pairs for some pstore types. Add the id to the filename to prevent that. Before patch: [/sys/fs/pstore] ls -li total 0 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi 1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi After: [/sys/fs/pstore] ls -li total 0 1232 -r--r--r--. 1 root root 148 Sep 29 17:09 console-efi-141202499100000 1231 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi-141202499200000 1230 -r--r--r--. 1 root root 148 Sep 29 17:44 console-efi-141202705400000 1229 -r--r--r--. 1 root root 67 Sep 29 17:44 console-efi-141202705500000 1228 -r--r--r--. 1 root root 67 Sep 29 20:42 console-efi-141203772600000 1227 -r--r--r--. 1 root root 148 Sep 29 23:42 console-efi-141204854900000 1226 -r--r--r--. 1 root root 67 Sep 29 23:42 console-efi-141204855000000 1225 -r--r--r--. 1 root root 148 Sep 29 23:59 console-efi-141204954200000 1224 -r--r--r--. 1 root root 67 Sep 29 23:59 console-efi-141204954400000 Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Chris Ball authored
commit 51529705 upstream. pci_enable_msi() can return failure with both positive and negative integers -- it returns 0 for success -- but is only tested here for "if (ret < 0)". This causes us to try to use MSI on the RTS5249 SD reader in the Dell XPS 11 when enabling MSI failed, causing: [ 1.737110] rtsx_pci: probe of 0000:05:00.0 failed with error -110 Reported-by:
D. Jared Dominguez <Jared_Dominguez@Dell.com> Tested-by:
Chris Ball <chris@printf.net> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Eric W. Biederman authored
commit 0d082601 upstream. Andy Lutomirski recently demonstrated that when chroot is used to set the root path below the path for the new ``root'' passed to pivot_root the pivot_root system call succeeds and leaks mounts. In examining the code I see that starting with a new root that is below the current root in the mount tree will result in a loop in the mount tree after the mounts are detached and then reattached to one another. Resulting in all kinds of ugliness including a leak of that mounts involved in the leak of the mount loop. Prevent this problem by ensuring that the new mount is reachable from the current root of the mount tree. [Added stable cc. Fixes CVE-2014-7970. --Andy] Reported-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
