- 01 Apr, 2020 4 commits
-
-
Tero Kristo authored
Texas Instruments K3 SoCs contain an RTI (Real Time Interrupt) module which can be used as a watchdog. This IP provides a support for windowed watchdog mode, in which the watchdog must be petted within a certain time window. If it is petted either too soon, or too late, a watchdog error will be triggered. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200312095808.19907-4-t-kristo@ti.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Tero Kristo authored
TI K3 SoCs contain an RTI (Real Time Interrupt) module which can be used to implement a windowed watchdog functionality. Windowed watchdog will generate an error if it is petted outside the time window, either too early or too late. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200312095808.19907-2-t-kristo@ti.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Lucas Stach authored
The RAVE watchdog is not a full system watchdog, but is used to reset ethernet switch when required. Change the name to better reflect this usage. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313101138.25915-1-l.stach@pengutronix.deSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Chris Packham authored
If the heartbeat module param is not specified we would get an error message watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range watchdog: f1020300.watchdog: falling back to default timeout (171) This is because we were initialising heartbeat to -1. By removing the initialisation (thus letting the C run time initialise it to 0) we silence the warning message and the default timeout is still used. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313031312.1485-1-chris.packham@alliedtelesis.co.nzSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
- 18 Mar, 2020 10 commits
-
-
Tomer Maimon authored
Signed-off-by:
Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20200303100114.87786-4-tmaimon77@gmail.comReviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Tero Kristo authored
Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Anson Huang authored
.remove callback implementation doesn' call clk_disable_unprepare() which is buggy, actually, we can just use devm_watchdog_register_device() and devm_add_action_or_reset() to handle all necessary operations for remove action, then .remove callback can be dropped. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1582512687-13312-1-git-send-email-Anson.Huang@nxp.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Dmitry Safonov authored
Many watchdog drivers use watchdog_stop_on_reboot() helper in order to stop the watchdog on system reboot. Unfortunately, this logic is coded in driver's probe function and doesn't allows user to decide what to do during shutdown/reboot. On the other side, Xen and Qemu watchdog drivers (xen_wdt and i6300esb) may be configured to either send NMI or turn off/reboot VM as the watchdog action. As the kernel may stuck at any state, sending NMIs can't reliably reboot the VM. At Arista, we benefited from the following set-up: the emulated watchdogs trigger VM reset and softdog is set to catch less severe conditions to generate vmcore. Just before reboot watchdog's timeout is increased to some good-enough value (3 mins). That keeps watchdog always running and guarantees that VM doesn't stuck. Provide new stop_on_reboot module parameter to let user control watchdog's reboot policy. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Signed-off-by:
Dmitry Safonov <dima@arista.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200223114939.194754-1-dima@arista.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Linus Walleij authored
An attempt to convert the driver to using GPIO descriptors (see Link tag) was discouraged in favor of deleting the handling of the update GPIO altogehter since there are no in-tree users. This patch deletes the GPIO handling instead. Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-watchdog/20200210102209.289379-1-linus.walleij@linaro.org/Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200229115046.57781-1-linus.walleij@linaro.orgSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Anson Huang authored
There is nothing in use from init.h, remove it. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1582250430-8872-2-git-send-email-Anson.Huang@nxp.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Anson Huang authored
There is nothing in use from init.h/reboot.h, remove them. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1582250430-8872-1-git-send-email-Anson.Huang@nxp.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Stephen Boyd authored
The DT or ACPI tables should tell the driver what the irq flags are. Given that this driver probes only on DT based platforms and those DT platforms specify the irq flags we can safely drop the forced irq flag setting here. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/20200220002047.115000-1-swboyd@chromium.org [groeck: Context conflict resolution] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Loic Poulain authored
Add suspend and resume pm operations. Tested on dragonboard-410c. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1581435483-6796-1-git-send-email-loic.poulain@linaro.orgSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Ansuel Smith authored
Some platform like ipq806x doesn't support pretimeout and define some interrupts used by qcom,msm-timer. Change the driver to check and use pretimeout only on qcom,kpss-wdt as it's the only platform that actually supports it. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200204195648.23350-1-ansuelsmth@gmail.com [groeck: Conflict resolution] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
- 15 Mar, 2020 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single commit to handle an erratum in Cavium ThunderX to prevent access to GIC registers which are broken in the implementation" * tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull futex fix from Thomas Gleixner: "Fix for yet another subtle futex issue. The futex code used ihold() to prevent inodes from vanishing, but ihold() does not guarantee inode persistence. Replace the inode pointer with a per boot, machine wide, unique inode identifier. The second commit fixes the breakage of the hash mechanism which causes a 100% performance regression" * tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Unbreak futex hashing futex: Fix inode life-time issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Map EFI runtime service data as encrypted when SEV is enabled. Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode. - Remove the warning in the vector management code which triggered when a managed interrupt affinity changed outside of a CPU hotplug operation. The warning was correct until the recent core code change that introduced a CPU isolation feature which needs to migrate managed interrupts away from online CPUs under certain conditions to achieve the isolation" * tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vector: Remove warning on managed interrupt migration x86/ioremap: Map EFI runtime services data as encrypted for SEV
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A pile of perf fixes: Kernel side: - AMD uncore driver: Replace the open coded sanity check with the core variant, which provides the correct error code and also leaves a hint in dmesg Tooling: - Fix the stdio input handling with glibc versions >= 2.28 - Unbreak the futex-wake benchmark which was reduced to 0 test threads due to the conversion to cpumaps - Initialize sigaction structs before invoking sys_sigactio() - Plug the mapfile memory leak in perf jevents - Fix off by one relative directory includes - Fix an undefined string comparison in perf diff" * tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag tools: Fix off-by 1 relative directory includes perf jevents: Fix leak of mapfile memory perf bench: Clear struct sigaction before sigaction() syscall perf bench futex-wake: Restore thread count default to online CPU count perf top: Fix stdio interface input handling with glibc 2.28+ perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare perf symbols: Don't try to find a vmlinux file when looking for kernel modules perf bench: Share some global variables to fix build with gcc 10 perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files perf env: Do not return pointers to local variables perf tests bp_account: Make global variable static
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix adding the missing time namespace adjustment in sys/sysinfo which caused sys/sysinfo to be inconsistent with /proc/uptime when read from a task inside a time namespace" * tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sys/sysinfo: Respect boottime inside time namespace
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fixes from Thomas Gleixner: "Two RAS related fixes: - Shut down the per CPU thermal throttling poll work properly when a CPU goes offline. The missing shutdown caused the poll work to be migrated to a unbound worker which triggered warnings about the usage of smp_processor_id() in preemptible context - Fix the PPIN feature initialization which missed to enable the functionality when PPIN_CTL was enabled but the MSR locked against updates" * tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix logic and comments around MSR_PPIN_CTL x86/mce/therm_throt: Undo thermal polling properly on CPU offline
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "Two EFI fixes: - Prevent a race and buffer overflow in the sysfs efivars interface which causes kernel memory corruption. - Add the missing NULL pointer checks in efivar_store_raw()" * tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Add a sanity check to efivar_store_raw() efi: Fix a race and a buffer overflow while reading efivars via sysfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: - Intel VT-d fixes: - RCU list handling fixes - Replace WARN_TAINT with pr_warn + add_taint for reporting firmware issues - DebugFS fixes - Fix for hugepage handling in iova_to_phys implementation - Fix for handling VMD devices, which have a domain number which doesn't fit into 16 bits - Warning message fix - MSI allocation fix for iommu-dma code - Sign-extension fix for io page-table code - Fix for AMD-Vi to properly update the is-running bit when AVIC is used * tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Populate debugfs if IOMMUs are detected iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE iommu/vt-d: Ignore devices with out-of-spec domain number iommu/vt-d: Fix the wrong printing in RHSA parsing iommu/vt-d: Fix debugfs register reads iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint iommu/vt-d: Silence RCU-list debugging warnings iommu/vt-d: Fix RCU-list bugs in intel_iommu_init() iommu/dma: Fix MSI reservation allocation iommu/io-pgtable-arm: Fix IOVA validation for 32-bit iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page iommu/vt-d: Fix RCU list debugging warnings
-
Thomas Gleixner authored
Merge tag 'irqchip-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Add workaround for Cavium/Marvell ThunderX unimplemented GIC registers
-
- 14 Mar, 2020 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has quite some regression fixes this time. One is also related to watchdogs, we have proper acks from Guenter for them" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: acpi: put device when verifying client fails misc: eeprom: at24: fix regulator underflow i2c: gpio: suppress error on probe defer macintosh: windfarm: fix MODINFO regression i2c: designware-pci: Fix BUG_ON during device removal i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional watchdog: iTCO_wdt: Export vendorsupport
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - Fix __ALIGN_STR and __ALIGN to not use default junk padding - Misc Kconfig cleanups, header updates * tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: define __ALIGN_STR and __ALIGN symbols for ARC ARC: show_regs: reduce lines of output ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h> ARC: fpu: fix randconfig build error reported by 0-day test service ARC: fix some Kconfig typos ARC: Cleanup old Kconfig IO scheduler options
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Bugfixes for x86 and s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1 KVM: s390: Also reset registers in sync regs for initial cpu reset KVM: fix Kconfig menu text for -Werror KVM: x86: remove stale comment from struct x86_emulate_ctxt KVM: x86: clear stale x86_emulate_ctxt->intercept value KVM: SVM: Fix the svm vmexit code for WRMSR KVM: X86: Fix dereference null cpufreq policy
-
Megha Dey authored
Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel) gets populated only when DMA remapping is enabled (dmar_disabled = 0) irrespective of whether interrupt remapping is enabled or not. Instead, populate the intel iommu debugfs directory if any IOMMUs are detected. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ee2636b8 ("iommu/vt-d: Enable base Intel IOMMU debugfs support") Signed-off-by:
Megha Dey <megha.dey@linux.intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A small collection of fixes. I'll make another sweep soon to look for more fixes for this -rc series. - Mark device node const in of_clk_get_parent APIs to ease landing changes in users later - Fix flag for Qualcomm SC7180 video clocks where we thought it would never turn off but actually hardware takes care of it - Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because this clk is always on anyway - Correct some bad dt-binding numbers for i.MX8MN SoCs" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx8mn: Fix incorrect clock defines clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk of: clk: Make of_clk_get_parent_{count,name}() parameter const
-
Paolo Bonzini authored
-
Vitaly Kuznetsov authored
When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter with EVMCS GPA = 0 the host crashes because the evmcs_gpa != vmx->nested.hv_evmcs_vmptr condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will happen on vmx->nested.hv_evmcs pointer dereference. Another problematic EVMCS ptr value is '-1' but it only causes host crash after nested_release_evmcs() invocation. The problem is exactly the same as with '0', we mistakenly think that the EVMCS pointer hasn't changed and thus nested.hv_evmcs_vmptr is valid. Resolve the issue by adding an additional !vmx->nested.hv_evmcs check to nested_vmx_handle_enlightened_vmptrld(), this way we will always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL and this is supposed to catch all invalid EVMCS GPAs. Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs() to be consistent with initialization where we don't currently set hv_evmcs_vmptr to '-1'. Cc: stable@vger.kernel.org Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fully do the CPU resets as intended With 7de3f142 ("KVM: s390: Add new reset vcpu API") we clarified the meaning of the reset ioctl to fully reset the CPU and not only the parts that can not be handled by userspace. Turns out that we missed some parts.
-
Marc Zyngier authored
Despite the architecture spec requiring that reserved registers in the GIC distributor memory map are RES0 (and thus are not allowed to generate an exception), the Cavium ThunderX (aka TX1) SoC explodes as such: [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956 [ 0.000000] Hardware name: cavium,thunder-88xx (DT) [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 0.000000] pc : __raw_readl+0x0/0x8 [ 0.000000] lr : gic_init_bases+0x110/0x560 [ 0.000000] sp : ffff800011243d90 [ 0.000000] x29: ffff800011243d90 x28: 0000000000000000 [ 0.000000] x27: 0000000000000018 x26: 0000000000000002 [ 0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80 [ 0.000000] x23: 0000000000000000 x22: ffff010fdc322b68 [ 0.000000] x21: ffff800010a7a208 x20: 00000000009b0404 [ 0.000000] x19: ffff80001124dad0 x18: 0000000000000010 [ 0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af [ 0.000000] x15: ffffffffffffffff x14: ffff800011249908 [ 0.000000] x13: ffff800091243ae7 x12: ffff800011243af4 [ 0.000000] x11: ffff80001126e000 x10: ffff800011243a70 [ 0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828 [ 0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1 [ 0.000000] x5 : 0000000000000001 x4 : 0000000000000000 [ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c [ 0.000000] Call trace: [ 0.000000] __raw_readl+0x0/0x8 [ 0.000000] gic_of_init+0x188/0x224 [ 0.000000] of_irq_init+0x200/0x3cc [ 0.000000] irqchip_init+0x1c/0x40 [ 0.000000] init_IRQ+0x160/0x1d0 [ 0.000000] start_kernel+0x2ec/0x4b8 [ 0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000) when reading the GICv4.1 GICD_TYPER2 register, which is unexpected... Work around it by adding a new quirk for the following variants: ThunderX: CN88xx OCTEON TX: CN83xx, CN81xx OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx* and use this flag to avoid accessing GICD_TYPER2. Note that all reserved registers (including redistributors and ITS) are impacted by this erratum, but that only GICD_TYPER2 has to be worked around so far. Signed-off-by:
Marc Zyngier <maz@kernel.org> Tested-by:
Robert Richter <rrichter@marvell.com> Tested-by:
Mark Salter <msalter@redhat.com> Tested-by:
Tim Harvey <tharvey@gateworks.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Robert Richter <rrichter@marvell.com> Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org
-
Nitesh Narayan Lal authored
Previously all fields of structure kvm_lapic_irq were not initialized before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause an issue when any of those fields are used for processing a request. For example not initializing the msi_redir_hint field before passing to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of kvm_apic_map_get_dest_lapic(). This will specifically happen when the kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage value of msi_redir_hint, which should not happen as the request belongs to APIC fixed delivery mode and we do not want to deliver the interrupt only to the lowest priority candidate. This patch initializes all the fields of kvm_lapic_irq based on the values of ioapic redirect_entry object before passing it on to kvm_bitmap_or_dest_vcpus(). Fixes: 7ee30bc1 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by:
Nitesh Narayan Lal <nitesh@redhat.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> [Set level to false since the value doesn't really matter. Suggested by Vitaly Kuznetsov. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1 is not supported[*], i.e. intercepting ENCLS to inject a #UD is unnecessary. Avoiding ENCLS-exiting even when it is reported as supported by the CPU works around a reported issue where SGX is "hard" disabled after an S3 suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control are enumerated as unsupported. While the root cause of the S3 issue is unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a workaround for what is most likely a hardware or firmware issue. As a bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and vmcs02. Note, SGX must be disabled in BIOS to take advantage of this workaround [*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are cleared. Soft disabled meaning disabling SGX without clearing the primary CPUID bit (in leaf 0x7) and without poking into non-SGX CPU paths, e.g. for the VMCS controls. Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest") Reported-by:
Toni Spets <toni.spets@iki.fi> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
Commit b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") accidentally left out the ir_data pointer when calling modity_irte_ga(), which causes the function amd_iommu_update_ga() to return prematurely due to struct amd_ir_data.ref is NULL and the "is_run" bit of IRTE does not get updated properly. This results in bad I/O performance since IOMMU AVIC always generate GA Log entry and notify IOMMU driver and KVM when it receives interrupt from the PCI pass-through device instead of directly inject interrupt to the vCPU. Fixes by passing ir_data when calling modify_irte_ga() as done previously. Fixes: b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Daniel Drake authored
VMD subdevices are created with a PCI domain ID of 0x10000 or higher. These subdevices are also handled like all other PCI devices by dmar_pci_bus_notifier(). However, when dmar_alloc_pci_notify_info() take records of such devices, it will truncate the domain ID to a u16 value (in info->seg). The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if it is 0000:00:02.0. In the unlucky event that a real device also exists at 0000:00:02.0 and also has a device-specific entry in the DMAR table, dmar_insert_dev_scope() will crash on: BUG_ON(i >= devices_cnt); That's basically a sanity check that only one PCI device matches a single DMAR entry; in this case we seem to have two matching devices. Fix this by ignoring devices that have a domain number higher than what can be looked up in the DMAR table. This problem was carefully diagnosed by Jian-Hong Pan. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Fixes: 59ce0515 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens") Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Zhenzhong Duan authored
When base address in RHSA structure doesn't match base address in each DRHD structure, the base address in last DRHD is printed out. This doesn't make sense when there are multiple DRHD units, fix it by printing the buggy RHSA's base address. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 13 Mar, 2020 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small fixes, both in drivers: ipr and ufs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ipr: Fix softlockup when rescanning devices in petitboot scsi: ufs: Fix possible unclocked access to auto hibern8 timer register
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "These are mostly fscontext fixes, but there is also one that fixes collisions seen in fscache: - Ensure the fs_context has the correct fs_type when mounting and submounting - Fix leaking of ctx->nfs_server.hostname - Add minor version to fscache key to prevent collisions" * tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: nfs: add minor version to nfs_server_key for fscache NFS: Fix leak of ctx->nfs_server.hostname NFS: Don't hard-code the fs_type when submounting NFS: Ensure the fs_context has the correct fs_type before mounting
-