- 26 Aug, 2020 11 commits
-
-
Jaehyun Chung authored
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by:
Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Eryk Brol <eryk.brol@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wayne Lin authored
[Why] Current function excludes the logic to generate H14b-VSIF. Now it constructs HF-VSIF only and causes HDMI compliace test fail. [How] According to HDMI spec, source devices shall utilize the H14b-VSIF whenever the signaling capabilities of the H14b-VSIF allow this. Here keep the logic for HF-VSIF and add H14b-VSIF construction part. Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Chris Park authored
[Why] If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of tranditional transmitter control. Interface is agreed with VBIOS for eDP to use this new path to program LVTMA registers. [How] Expose DAL interface to send DMUB command for LVTMA control that VBIOS currently uses. Signed-off-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
-
Sung Lee authored
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Jiansong Chen authored
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Huang Rui authored
We still have a few iommu issues which need to address, so force raven as "dgpu" path for the moment. This is to add the fallback path to bypass IOMMU if IOMMU v2 is disabled or ACPI CRAT table not correct. v2: Use ignore_crat parameter to decide whether it will go with IOMMUv2. v3: Align with existed thunk, don't change the way of raven, only renoir will use "dgpu" path by default. v4: don't update global ignore_crat in the driver, and revise fallback function if CRAT is broken. v5: refine acpi crat good but no iommu support case, and rename the title. v6: fix the issue of dGPU initialized firstly, just modify the report value in the node_show(). Signed-off-by:Huang Rui <ray.huang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Evan Quan authored
Correct the Vega20 thermal swctf limit. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Correct the Vega12 thermal swctf limit. Signed-off-by:
-
Evan Quan authored
Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267Signed-off-by:
-
Luben Tuikov authored
a) Embed struct drm_device into struct amdgpu_device. b) Modify the inline-f drm_to_adev() accordingly. c) Modify the inline-f adev_to_drm() accordingly. d) Eliminate the use of drm_device.dev_private, in amdgpu. e) Switch from using drm_dev_alloc() to drm_dev_init(). f) Add a DRM driver release function, which frees the container amdgpu_device after all krefs on the contained drm_device have been released. v2: Split out adding adev_to_drm() into its own patch (previous commit), making this patch more succinct and clear. More detailed commit description. v3: squash in fix to call drmm_add_final_kfree() to avoid a warning. Signed-off-by:Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
- 24 Aug, 2020 18 commits
-
-
Luben Tuikov authored
Add a static inline adev_to_drm() to obtain the DRM device pointer from an amdgpu_device pointer. Signed-off-by:
-
Luben Tuikov authored
Get the amdgpu_device from the DRM device by use of an inline function, drm_to_adev(). The inline function resolves a pointer to struct drm_device to a pointer to struct amdgpu_device. v2: Use a typed visible static inline function instead of an invisible macro. Signed-off-by: -
Prike.Liang authored
Enabe HDP SD/DS clock gatting in Renoir series. Signed-off-by:
Prike.Liang <Prike.Liang@amd.com> Reviewed-by:
-
Prike.Liang authored
Enable ATHUB clock gatting set in Renoir series. Signed-off-by:
-
Jiansong Chen authored
When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Dennis Li authored
Re-apply commit 72e14ebf [ 584.110304] ============================================ [ 584.110590] WARNING: possible recursive locking detected [ 584.110876] 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 Tainted: G OE [ 584.111164] -------------------------------------------- [ 584.111456] kworker/38:1/553 is trying to acquire lock: [ 584.111721] ffff9b15ff0a47a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.112112] but task is already holding lock: [ 584.112673] ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.113068] other info that might help us debug this: [ 584.113689] Possible unsafe locking scenario: [ 584.114350] CPU0 [ 584.114685] ---- [ 584.115014] lock(&adev->reset_sem); [ 584.115349] lock(&adev->reset_sem); [ 584.115678] *** DEADLOCK *** [ 584.116624] May be due to missing lock nesting notation [ 584.117284] 4 locks held by kworker/38:1/553: [ 584.117616] #0: ffff9ad635c1d348 ((wq_completion)events){+.+.}, at: process_one_work+0x21f/0x630 [ 584.117967] #1: ffffac708e1c3e58 ((work_completion)(&con->recovery_work)){+.+.}, at: process_one_work+0x21f/0x630 [ 584.118358] #2: ffffffffc1c2a5d0 (&tmp->hive_lock){+.+.}, at: amdgpu_device_gpu_recover+0xae/0x1030 [amdgpu] [ 584.118786] #3: ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.119222] stack backtrace: [ 584.119990] CPU: 38 PID: 553 Comm: kworker/38:1 Kdump: loaded Tainted: G OE 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 [ 584.120782] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019 [ 584.121223] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [ 584.121638] Call Trace: [ 584.122050] dump_stack+0x98/0xd5 [ 584.122499] __lock_acquire+0x1139/0x16e0 [ 584.122931] ? trace_hardirqs_on+0x3b/0xf0 [ 584.123358] ? cancel_delayed_work+0xa6/0xc0 [ 584.123771] lock_acquire+0xb8/0x1c0 [ 584.124197] ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.124599] down_write+0x49/0x120 [ 584.125032] ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.125472] amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.125910] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [ 584.126367] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [ 584.126789] process_one_work+0x29e/0x630 [ 584.127208] worker_thread+0x3c/0x3f0 [ 584.127621] ? __kthread_parkme+0x61/0x90 [ 584.128014] kthread+0x12f/0x150 [ 584.128402] ? process_one_work+0x630/0x630 [ 584.128790] ? kthread_park+0x90/0x90 [ 584.129174] ret_from_fork+0x3a/0x50 Each adev has owned lock_class_key to avoid false positive recursive locking. v2: 1. register adev->lock_key into lockdep, otherwise lockdep will report the below warning [ 1216.705820] BUG: key ffff890183b647d0 has not been registered! [ 1216.705924] ------------[ cut here ]------------ [ 1216.705972] DEBUG_LOCKS_WARN_ON(1) [ 1216.705997] WARNING: CPU: 20 PID: 541 at kernel/locking/lockdep.c:3743 lockdep_init_map+0x150/0x210 v3: change to use down_write_nest_lock to annotate the false dead-lock warning. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
Dennis Li authored
Change to dynamically create and release hive info object, which help driver support more hives in the future. v2: Change to save hive object pointer in adev, to avoid locking xgmi_mutex every time when calling amdgpu_get_xgmi_hive. v3: 1. Change type of hive object pointer in adev from void* to amdgpu_hive_info*. 2. remove unnecessary variable initialization. Reviewed-by:
-
Dennis Li authored
Using dev_xxx instead of DRM_xxx/pr_xxx to indicate which device of a hive is the message for. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dennis Li authored
in single gpu system, if driver reenter gpu recovery, amdgpu_device_lock_adev will return false, but hive is nullptr now. Reviewed-by:
-
Dennis Li authored
clients don't need reset-lock for synchronization when no GPU recovery. v2: change to return the return value of down_read_killable. v3: if GPU recovery begin, VF ignore FLR notification. Reviewed-by:
Monk Liu <monk.liu@amd.com> Acked-by:
-
Jiansong Chen authored
DC BTC support for sienna_cichlid is added, it provides the DC tolerance and aging measurements. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Furquan Shaikh authored
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps In `amdgpu_dm_update_backlight_caps()`, there is a local `amdgpu_dm_backlight_caps` object that is filled in by `amdgpu_acpi_get_backlight_caps()`. However, this object is uninitialized before the call and hence the subsequent check for aux_support can fail since it is not initialized by `amdgpu_acpi_get_backlight_caps()` as well. This change initializes this local `amdgpu_dm_backlight_caps` object to 0. Reviewed-by:
Furquan Shaikh <furquan@google.com> Signed-off-by:
-
Alex Dewar authored
In init_powerplay_table_information() the value returned from kmalloc() is cast unnecessarily. Remove cast. Issue identified with Coccinelle. Signed-off-by:
Alex Dewar <alex.dewar90@gmail.com> Signed-off-by:
-
Wang Hai authored
Remove asic_reg/nbio/nbio_6_1_offset.h which is included more than once Reviewed-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Lukas Bulwahn authored
Besides the intended change, commit 4cc1178e ("drm/amdgpu: replace DRM prefix with PCI device info for gfx/mmhub") also set the source files mmhub_v1_0.c and gfx_v9_4.c to be executable, i.e., changed fromold mode 644 to new mode 755. Commit 241b2ec9 ("drm/amd/display: Add dcn30 Headers (v2)") added the four header files {dpcs,dcn}_3_0_0_{offset,sh_mask}.h as executable, i.e., mode 755. Set to the usual modes for source and headers files and clean up those mistakes. No functional change. Reviewed-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Dennis Li authored
if other threads have holden the reset lock, recovery will fail to try_lock. Therefore we introduce atomic hive->in_reset and adev->in_gpu_reset, to avoid reentering GPU recovery. v2: drop "? true : false" in the definition of amdgpu_in_reset Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] These aren't stable on some platform configurations when driving multiple displays, especially on higher resolution. In particular the delay in asserting p-state and validating from x86 outweights any power or performance benefit from the hardware composition. Under some configurations this will manifest itself as extreme stutter or unresponsiveness especially when combined with cursor movement. [How] Disable these for now. Exposing overlays to userspace doesn't guarantee that they'll be able to use them in any and all configurations and it's part of the DRM contract to have userspace gracefully handle validation failures when they occur. Valdiation occurs as part of DC and this in particular affects RV, so disable this in dcn10_global_validation. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Signed-off-by:
-
Mukul Joshi authored
Add __user annotation to fix related sparse warning while reading SDMA counters from userland. Also, rework the read SDMA counters function by removing redundant checks. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
- 18 Aug, 2020 11 commits
-
-
Alexander Monakov authored
Documentation for sysfs backlight level interface requires that values in both 'brightness' and 'actual_brightness' files are interpreted to be in range from 0 to the value given in the 'max_brightness' file. With amdgpu, max_brightness gives 255, and values written by the user into 'brightness' are internally rescaled to a wider range. However, reading from 'actual_brightness' gives the raw register value without inverse rescaling. This causes issues for various userspace tools such as PowerTop and systemd that expect the value to be in the correct range. Introduce a helper to retrieve internal backlight range. Use it to reimplement 'convert_brightness' as 'convert_brightness_from_user' and introduce 'convert_brightness_to_user'. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Alexander Monakov <amonakov@ispras.ru> Signed-off-by:
-
Tong Zhang authored
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1), the caller should check error using DC_OK instead of checking against 0 Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
-
Colin Ian King authored
The 32 bit unsigned integer bl_pwm is being shifted using 32 bit arithmetic and then being assigned to a 64 bit unsigned integer. There is a potential for a 32 bit overflow so cast bl_pwm to enforce a 64 bit shift operation to avoid this. Addresses-Coverity: ("unintentional integer overflow") Fixes: 3ba01817 ("drm/amd/display: Move panel_cntl specific register from abm to panel_cntl.") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alex Deucher authored
We can get this on RENOIR and newer via the SMU metrics table. Reviewed-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Alex Deucher authored
Grab the data from the SMU metrics table. Reviewed-by:
-
Alex Deucher authored
Grab the data from the SMU metrics table. Reviewed-by:
-
Alex Deucher authored
FAMILY_KV is APUs and we already check for APUs. Reviewed-by:
-
Leo Liu authored
Fix warning from kernel test robot v2: remove the local variable as well Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
jqdeng authored
Use function printk_ratelimit to limit the print rate. Signed-off-by:
jqdeng <Emily.Deng@amd.com> Acked-by:
-
jqdeng authored
Only for no job running test case need to do recover in flr notification. For having job in mirror list, then let guest driver to hit job timeout, and then do recover. Signed-off-by:
-
Evan Quan authored
Considering the same logic can be applied to Arcturus, Navi1X and Sienna Cichlid. Signed-off-by:
-
