- 20 Nov, 2016 40 commits
-
-
Amadeusz Sławiński authored
commit 23bc6ab0 upstream. When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by:
Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Daniele Palmas authored
commit 3c0415fa upstream. This patch adds support for 0x1206 PID of Telit LE910. Since the interfaces positions are the same than the ones for 0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 79ad07d4 upstream. There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa8 ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Michael Neuling authored
commit 6bcb8014 upstream. At the start of __tm_recheckpoint() we save the kernel stack pointer (r1) in SPRG SCRATCH0 (SPRG2) so that we can restore it after the trecheckpoint. Unfortunately, the same SPRG is used in the SLB miss handler. If an SLB miss is taken between the save and restore of r1 to the SPRG, the SPRG is changed and hence r1 is also corrupted. We can end up with the following crash when we start using r1 again after the restore from the SPRG: Oops: Bad kernel stack pointer, sig: 6 [#1] SMP NR_CPUS=2048 NUMA pSeries CPU: 658 PID: 143777 Comm: htm_demo Tainted: G EL X 4.4.13-0-default #1 task: c0000b56993a7810 ti: c00000000cfec000 task.ti: c0000b56993bc000 NIP: c00000000004f188 LR: 00000000100040b8 CTR: 0000000010002570 REGS: c00000000cfefd40 TRAP: 0300 Tainted: G EL X (4.4.13-0-default) MSR: 8000000300001033 <SF,ME,IR,DR,RI,LE> CR: 02000424 XER: 20000000 CFAR: c000000000008468 DAR: 00003ffd84e66880 DSISR: 40000000 SOFTE: 0 PACATMSCRATCH: 00003ffbc865e680 GPR00: fffffffcfabc4268 00003ffd84e667a0 00000000100d8c38 000000030544bb80 GPR04: 0000000000000002 00000000100cf200 0000000000000449 00000000100cf100 GPR08: 000000000000c350 0000000000002569 0000000000002569 00000000100d6c30 GPR12: 00000000100d6c28 c00000000e6a6b00 00003ffd84660000 0000000000000000 GPR16: 0000000000000003 0000000000000449 0000000010002570 0000010009684f20 GPR20: 0000000000800000 00003ffd84e5f110 00003ffd84e5f7a0 00000000100d0f40 GPR24: 0000000000000000 0000000000000000 0000000000000000 00003ffff0673f50 GPR28: 00003ffd84e5e960 00000000003d0f00 00003ffd84e667a0 00003ffd84e5e680 NIP [c00000000004f188] restore_gprs+0x110/0x17c LR [00000000100040b8] 0x100040b8 Call Trace: Instruction dump: f8a1fff0 e8e700a8 38a00000 7ca10164 e8a1fff8 e821fff0 7c0007dd 7c421378 7db142a6 7c3242a6 38800002 7c810164 <e9c100e0> e9e100e8 ea0100f0 ea2100f8 We hit this on large memory machines (> 2TB) but it can also be hit on smaller machines when 1TB segments are disabled. To hit this, you also need to be virtualised to ensure SLBs are periodically removed by the hypervisor. This patches moves the saving of r1 to the SPRG to the region where we are guaranteed not to take any further SLB misses. Fixes: 98ae22e1 ("powerpc: Add helper functions for transactional memory context switching") Signed-off-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Vegard Nossum authored
commit c65d5c6c upstream. If we encounter a filesystem error during orphan cleanup, we should stop. Otherwise, we may end up in an infinite loop where the same inode is processed again and again. EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters Aborting journal on device loop0-8. EXT4-fs (loop0): Remounting filesystem read-only EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed! [...] See-also: c9eb13a9 ("ext4: fix hang when processing corrupted orphaned inode list") Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Vegard Nossum authored
commit 554a5ccc upstream. If we hit this error when mounted with errors=continue or errors=remount-ro: EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to continue. However, ext4_mb_release_context() is the wrong thing to call here since we are still actually using the allocation context. Instead, just error out. We could retry the allocation, but there is a possibility of getting stuck in an infinite loop instead, so this seems safer. [ Fixed up so we don't return EAGAIN to userspace. --tytso ] Fixes: 8556e8f3 ("ext4: Don't allow new groups to be added during block allocation") Signed-off-by:
-
Alex Deucher authored
commit d3200be6 upstream. Same interface as other UNIPHY blocks Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jim Mattson authored
commit 2f1fe811 upstream. When freeing the nested resources of a vcpu, there is an assumption that the vcpu's vmcs01 is the current VMCS on the CPU that executes nested_release_vmcs12(). If this assumption is violated, the vcpu's vmcs01 may be made active on multiple CPUs at the same time, in violation of Intel's specification. Moreover, since the vcpu's vmcs01 is not VMCLEARed on every CPU on which it is active, it can linger in a CPU's VMCS cache after it has been freed and potentially repurposed. Subsequent eviction from the CPU's VMCS cache on a capacity miss can result in memory corruption. It is not sufficient for vmx_free_vcpu() to call vmx_load_vmcs01(). If the vcpu in question was last loaded on a different CPU, it must be migrated to the current CPU before calling vmx_load_vmcs01(). Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 4fa7734c upstream. free_nested needs the loaded_vmcs to be valid if it is a vmcs02, in order to detach it from the shadow vmcs. However, this is not available anymore after commit 26a865f4 (KVM: VMX: fix use after free of vmx->loaded_vmcs, 2014-01-03). Revert that patch, and fix its problem by forcing a vmcs01 as the active VMCS before freeing all the nested VMX state. Reported-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by:
-
Gregory CLEMENT authored
commit f1270896 upstream. When a L2 cache controller is used in a system that provides hardware coherency, the entire outer cache operations are useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. In the current kernel implementation, the outer cache flush range operation is triggered by the dma_alloc function. This operation can be take place during runtime and in some circumstances may lead to the PCIe/PL310 deadlock on Armada 375/38x SoCs. This patch extends the __dma_clear_buffer() function to receive a boolean argument related to the coherency of the system. The same things is done for the calling functions. Reported-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.16: - Drop changes to struct arm_dm_alloc_args, cma_allocator_alloc() - Pass the new parameter to __alloc_from_contiguous() from __dma_alloc() - Adjust context] Signed-off-by:
-
Joseph Salisbury authored
commit 25b1f9ac upstream. BugLink: http://bugs.launchpad.net/bugs/1498667 As reported in BugLink, this device has an issue with Linux Power Management so adding a quirk. This quirk was reccomended by Alan Stern: http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.htmlSigned-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Adrien Vergé authored
commit df36c5be upstream. Like other buggy models that had their fixes [1], the touchscreen with id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier quirk. Otherwise, it fails to respond, blocks the boot for a random amount of time and pollutes dmesg with: [ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd [ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2889.502005] usb 1-5: can't read configurations, error -71 [ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd [ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2891.783443] usb 1-5: can't read configurations, error -71 [1]: See commits c68929f7, 876af5d4, d7499475, a32c99e7 and dc703ec2. Tested-by:
Adrien Vergé <adrienverge@gmail.com> Signed-off-by:
-
David Hildenbrand authored
commit f0454029 upstream. __tlb_flush_asce() should never be used if multiple asce belong to a mm. As this function changes mm logic determining if local or global tlb flushes will be neded, we might end up flushing only the gmap asce on all CPUs and a follow up mm asce flushes will only flush on the local CPU, although that asce ran on multiple CPUs. The missing tlb flushes will provoke strange faults in user space and even low address protections in user space, crashing the kernel. Fixes: 1b948d6c ("s390/mm,tlb: optimize TLB flushing for zEC12") Reported-by:
Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Florian Fainelli authored
commit 386512d1 upstream. In case any operation fails before we can successfully go the point where we would register a MDIO bus, we would be going to an error label which involves unregistering then freeing this yet to be created MDIO bus. Update all error paths to go to label free which is the only one valid until either the clock is enabled, or the MDIO bus is allocated and registered. This fixes kernel oops observed while trying to dereference the MDIO bus structure which is not yet allocated. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sachin Prabhu authored
commit 8d9535b6 upstream. When opening a file with O_CREAT flag, check to see if the file opened is an existing directory. This prevents the directory from being opened which subsequently causes a crash when the close function for directories cifs_closedir() is called which frees up the file->private_data memory while the file is still listed on the open file list for the tcon. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reported-by:
Xiaoli Feng <xifeng@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit f4cceb2a upstream. If kmap fails, it leads to memory corruption. Fixes: f64122c1 ('drm: add new QXL driver. (v1.4)') Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwandaSigned-off-by:
-
Dmitry Tunin authored
commit 12d86896 upstream. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3490 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1600623Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Lauro Costa authored
commit 72f9f8b5 upstream. Add hw id to ath3k usb device list and btusb blacklist T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3487 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Requires these firmwares: ar3k/AthrBT_0x11020100.dfu and ar3k/ramps_0x11020100_40.dfu Firmwares are available in linux-firmware. Device found in a laptop ASUS model N552VW. It's an Atheros AR9462 chip. Signed-off-by:
Lauro Costa <lauro@polilinux.com.br> Signed-off-by:
-
Chuck Lever authored
commit a4e187d8 upstream. Before commit 778be232 ("NFS do not find client in NFSv4 pg_authenticate"), the Linux callback server replied with RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB request. Let's restore that behavior so the server has a chance to do something useful about it, and provide a warning that helps admins correct the problem. Fixes: 778be232 ("NFS do not find client in NFSv4 ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Chuck Lever authored
commit 0533b130 upstream. If an RPC program does not set vs_dispatch and pc_func() returns rpc_drop_reply, the server sends a reply anyway containing a single word containing the value RPC_DROP_REPLY (in network byte-order, of course). This is a nonsense RPC message. Fixes: 9e701c61 ("svcrpc: simpler request dropping") Signed-off-by:
-
Peter Wu authored
commit ab58d8cc upstream. register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Alexey Dobriyan authored
commit 2c13ce8f upstream. Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.bySigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Lukas Wunner authored
commit abb2bafd upstream. The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lukas Wunner authored
commit 850c3210 upstream. We used to scan secondary buses until the following commit that was applied in 2009: 8659c406 ("x86: only scan the root bus in early PCI quirks") which commit constrained early quirks to the root bus only. Its motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to add a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs, which is located on a secondary bus behind a PCIe root port. To facilitate that, reintroduce scanning of secondary buses. The commit message of 8659c406 notes that scanning only the root bus "saves quite some unnecessary scanning work". The algorithm used prior to 8659c406 was particularly time consuming because it scanned buses 0 to 31 brute force. To avoid lengthening boot time, employ a recursive strategy which only scans buses that are actually reachable from the root bus. Yinghai Lu pointed out that the secondary bus number read from a bridge's config space may be invalid, in particular a value of 0 would cause an infinite loop. The PCI core goes beyond that and recurses to a child bus only if its bus number is greater than the parent bus number (see pci_scan_bridge()). Since the root bus is numbered 0, this implies that secondary buses may not be 0. Do the same on early scanning. If this algorithm is found to significantly impact boot time or cause infinite loops on broken hardware, it would be possible to limit its recursion depth: The Broadcom 4331 quirk applies at depth 1, all others at depth 0, so the bus need not be scanned deeper than that for now. An alternative approach would be to revert to scanning only the root bus, and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12 and 8086:1e16. Apple always positioned the card behind either of these three ports. The quirk would then check presence of the card in slot 0 below the root port and do its deed. Signed-off-by:
-
Lukas Wunner authored
commit 447d29d1 upstream. Since the following commit: 8659c406 ("x86: only scan the root bus in early PCI quirks") ... early quirks are only applied to devices on the root bus. The motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to reintroduce scanning of secondary buses for a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent regressions, open code the requirement to apply nvidia_bugs only on the root bus. Signed-off-by:
-
Soeren Moch authored
commit ca6e6126 upstream. Implement memory barriers according to Documentation/circular-buffers.txt: - use smp_store_release() to update ringbuffer read/write pointers - use smp_load_acquire() to load write pointer on reader side - use ACCESS_ONCE() to load read pointer on writer side This fixes data stream corruptions observed e.g. on an ARM Cortex-A9 quad core system with different types (PCI, USB) of DVB tuners. Signed-off-by:
Soeren Moch <smoch@web.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 04da2dae upstream. Sparse is complaining about ngene's bad usage of a __user ptr: >> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces) drivers/media/pci/ngene/ngene-dvb.c:62:48: expected unsigned char const [usertype] *buf drivers/media/pci/ngene/ngene-dvb.c:62:48: got char const [noderef] <asn:1>*buf As this is intercepting a .write() file ops, we can't just memcpy. We need to use copy_from_user. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Keerthy authored
commit e29385fa upstream. The reset value of weekday is 0x1. This is wrong since the reset values of the day/month/year make up to Jan 1 2001. When computed weekday comes out to be Monday. On a scale of 1-7(Sunday - Saturday) it should be 0x2. So we should not be relying on the reset value. Hence compute the wday using the current date/month/year values. Check if reset wday is any different from the computed wday, If different then set the wday which we computed using date/month/year values. Document Referred: http://ww1.microchip.com/downloads/en/DeviceDoc/20002266F.pdf Fixes: 1d1945d2 "drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips" Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> [bwh: Backported to 3.16: - No 64-time rtc_time functions available - Adjust context] Signed-off-by:
-
WANG Cong authored
commit 205e1e25 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Dmitri Epshtein authored
commit 06708f81 upstream. Commit aebea2ba ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes aebea2ba ("net: mvneta: fix Tx interrupt delay") Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Takashi Iwai authored
commit a8ff48cb upstream. The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by:
Laxminath Kasam <b_lkasam@codeaurora.org> Signed-off-by:
-
Takashi Iwai authored
commit f388cdcd upstream. snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Signed-off-by:
-
Lyude authored
commit 14ff8d48 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with a radeon GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, radeon_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d814b24f upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Sven Eckelmann authored
commit d1fe176c upstream. Speedy join only works when the received packet is either broadcast or an 4addr unicast packet. Thus packets converted from broadcast to unicast via the gateway handling code have to be converted to 4addr packets to allow the receiving gateway server to add the sender address as temporary entry to the translation table. Not doing it will make the batman-adv gateway server drop the DHCP response in many situations because it doesn't yet have the TT entry for the destination of the DHCP response. Fixes: 37135173 ("batman-adv: change interface_rx to get orig node") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Acked-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
David Daney authored
commit acd168c0 upstream. When the core THP code is modifying the permissions of a huge page it calls pmd_modify(), which unfortunately was clearing the _PAGE_HUGE bit of the page table entry. The result can be kernel messages like: mm/memory.c:397: bad pmd 000000040080004d. mm/memory.c:397: bad pmd 00000003ff00004d. mm/memory.c:397: bad pmd 000000040100004d. or: ------------[ cut here ]------------ WARNING: at mm/mmap.c:3200 exit_mmap+0x150/0x158() Modules linked in: ipv6 at24 octeon3_ethernet octeon_srio_nexus m25p80 CPU: 12 PID: 1295 Comm: pmderr Not tainted 3.10.87-rt80-Cavium-Octeon #4 Stack : 0000000040808000 0000000014009ce1 0000000000400004 ffffffff81076ba0 0000000000000000 0000000000000000 ffffffff85110000 0000000000000119 0000000000000004 0000000000000000 0000000000000119 43617669756d2d4f 0000000000000000 ffffffff850fda40 ffffffff85110000 0000000000000000 0000000000000000 0000000000000009 ffffffff809207a0 0000000000000c80 ffffffff80f1bf20 0000000000000001 000000ffeca36828 0000000000000001 0000000000000000 0000000000000001 000000ffeca7e700 ffffffff80886924 80000003fd7a0000 80000003fd7a39b0 80000003fdea8000 ffffffff80885780 80000003fdea8000 ffffffff80f12218 000000000000000c 000000000000050f 0000000000000000 ffffffff80865c4c 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff80865c4c>] show_stack+0x6c/0xf8 [<ffffffff80885780>] warn_slowpath_common+0x78/0xa8 [<ffffffff809207a0>] exit_mmap+0x150/0x158 [<ffffffff80882d44>] mmput+0x5c/0x110 [<ffffffff8088b450>] do_exit+0x230/0xa68 [<ffffffff8088be34>] do_group_exit+0x54/0x1d0 [<ffffffff8088bfc0>] __wake_up_parent+0x0/0x18 ---[ end trace c7b38293191c57dc ]--- BUG: Bad rss-counter state mm:80000003fa168000 idx:1 val:1536 Fix by not clearing _PAGE_HUGE bit. Signed-off-by:
David Daney <david.daney@cavium.com> Tested-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13687/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.16: - Adjust context - _PAGE_HUGE might not be defined] Signed-off-by:
-
Sara Sharon authored
commit d5d0689a upstream. This fixes a pretty ancient bug that hasn't manifested itself until now. The scratchbuf for command queue is allocated only for 32 slots but is accessed with the queue write pointer - which can be up to 256. Since the scratch buf size was 16 and there are up to 256 TFDs we never passed a page boundary when accessing the scratch buffer, but when attempting to increase the size of the scratch buffer a panic was quick to follow when trying to access the address resulted in a page boundary. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 38c0f334 ("iwlwifi: use coherent DMA memory for command header") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Theodore Ts'o authored
commit 5b9554dc upstream. If s_reserved_gdt_blocks is extremely large, it's possible for ext4_init_block_bitmap(), which is called when ext4 sets up an uninitialized block bitmap, to corrupt random kernel memory. Add the same checks which e2fsck has --- it must never be larger than blocksize / sizeof(__u32) --- and then add a backup check in ext4_init_block_bitmap() in case the superblock gets modified after the file system is mounted. Reported-by:
-
Sven Eckelmann authored
commit cbef1e10 upstream. The orig_ifinfo reference counter for last_bonding_candidate in batadv_orig_node has to be reduced when an originator node is released. Otherwise the orig_ifinfo is leaked and the reference counter the netdevice is not reduced correctly. Fixes: f3b3d901 ("batman-adv: add bonding again") Signed-off-by:
-
Sven Eckelmann authored
commit 15c2ed75 upstream. The replacement of last_bonding_candidate in batadv_orig_node has to be an atomic operation. Otherwise it is possible that the reference counter of a batadv_orig_ifinfo is reduced which was no longer the last_bonding_candidate when the new candidate is added. This can either lead to an invalid memory access or to reference leaks which make it impossible to an interface which was added to batman-adv. Fixes: f3b3d901 ("batman-adv: add bonding again") Signed-off-by:
-
