- 28 Jul, 2021 38 commits
-
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_ce to just a slab_ce. v2: Make slab static (Jason, 0day) Reviewed-by:
Jason Ekstrand <jason@jlekstrand.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-4-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_blocks to just a slab_blocks. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
With the global kmem_cache shrink infrastructure gone there's nothing special and we can convert them over. I'm doing this split up into each patch because there's quite a bit of noise with removing the static global.slab_cache to just a slab_cache. v2: Make slab static (Jason, 0day) Reviewed-by:
-
Daniel Vetter authored
When modesetting (aka the full pci driver, which has nothing to do with disable_display option, which just gives you the full pci driver without the display driver) is disabled, we load nothing and do nothing. So move that check first, for a bit of orderliness. With Jason's module init/exit table this now becomes trivial. Reviewed-by:
-
Matt Roper authored
During a rebase the parameters were partially renamed, but not completely. Since the subsequent patches that start using this macro haven't landed on an upstream tree yet this didn't cause a build failure. Fixes: 086df54e ("drm/i915/xehpsdv: add initial XeHP SDV definitions") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Caz Yokoyama <caz.yokoyama@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-2-matthew.d.roper@intel.com
-
Daniele Ceraolo Spurio authored
Unblock GuC submission on Gen11+ platforms. v2: (Martin Peres / John H) - Delete debug message when GuC is disabled by default on certain platforms Signed-off-by:Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com
-
Matthew Brost authored
Implement a simple static mapping algorithm of the i915 priority levels (int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as follows: i915 level < 0 -> GuC low level (3) i915 level == 0 -> GuC normal level (2) i915 level < INT_MAX -> GuC high level (1) i915 level == INT_MAX -> GuC highest level (0) We believe this mapping should cover the UMD use cases (3 distinct user levels + 1 kernel level). In addition to static mapping, a simple counter system is attached to each context tracking the number of requests inflight on the context at each level. This is needed as the GuC levels are per context while in the i915 levels are per request. v2: (Daniele) - Add BUILD_BUG_ON to enforce ordering of priority levels - Add missing lockdep to guc_prio_fini - Check for return before setting context registered flag - Map DISPLAY priority or higher to highest guc prio - Update comment for guc_prio Signed-off-by:
-
John Harrison authored
Some testing environments and some heavier tests are slower than previous limits allowed for. For example, it can take multiple seconds for the 'context has been reset' notification handler to reach the 'kill the requests' code in the 'active' version of the 'reset engines' test. During which time the selftest gets bored, gives up waiting and fails the test. There is also an async thread that the selftest uses to pump work through the hardware in parallel to the context that is marked for reset. That also could get bored waiting for completions and kill the test off. Lastly, the flush at the of various test sections can also see timeouts due to the large amount of work backed up. This is also true of the live_hwsp_read test. Signed-off-by:
-
John Harrison authored
When GuC submission is enabled, the GuC controls engine resets. Rather than explicitly triggering a reset, the driver must submit a hanging context to GuC and wait for the reset to occur. Conversely, one of the tests specifically sends hanging batches to the engines but wants them to sit around until a manual reset of the full GT (including GuC itself). That means disabling GuC based engine resets to prevent those from killing the hanging batch too soon. So, add support to the scheduling policy helper for disabling resets as well as making them quicker! In GuC submission mode, the 'is engine idle' test basically turns into 'is engine PM wakelock held'. Independently, there is a heartbeat disable helper function that the tests use. For unexplained reasons, this acquires the engine wakelock before disabling the heartbeat and only releases it when re-enabling the heartbeat. As one of the tests tries to do a wait for idle in the middle of a heartbeat disabled section, it is therefore guaranteed to always fail. Added a 'no_pm' variant of the heartbeat helper that allows the engine to be asleep while also having heartbeats disabled. Signed-off-by:
-
Matthew Brost authored
Requests may take slightly longer with GuC submission, let's increase the timeouts in live_requests. Signed-off-by:
-
Rahul Kumar Singh authored
When GuC submission is enabled, the GuC controls engine resets. Rather than explicitly triggering a reset, the driver must submit a hanging context to GuC and wait for the reset to occur. Signed-off-by:
Rahul Kumar Singh <rahul.kumar.singh@intel.com> Signed-off-by:
-
Rahul Kumar Singh authored
When GuC submission is enabled, the GuC controls engine resets. Rather than explicitly triggering a reset, the driver must submit a hanging context to GuC and wait for the reset to occur. Signed-off-by:
-
John Harrison authored
There are many ways in which the hangcheck selftest can fail. Very few of them actually printed an error message to say what happened. So, fill in the missing messages. Signed-off-by:
-
Matthew Brost authored
This adds GuC backend support for i915_request_cancel(), which in turn makes CONFIG_DRM_I915_REQUEST_TIMEOUT work. This implementation makes use of fence while there are likely simplier options. A fence was chosen because of another feature coming soon which requires a user to block on a context until scheduling is disabled. In that case we return the fence to the user and the user can wait on that fence. v2: (Daniele) - A comment about locking the blocked incr / decr - A comments about the use of the fence - Update commit message explaining why fence - Delete redundant check blocked count in unblock function - Ring buffer implementation - Comment about blocked in submission path - Shorter rpm path v3: (Checkpatch) - Fix typos in commit message (Daniel) - Rework to simplier locking structure in guc_context_block / unblock Signed-off-by:
-
Matthew Brost authored
When using GuC submission, if a context gets banned disable scheduling and mark all inflight requests as complete. Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
John Harrison authored
The media watchdog mechanism involves GuC doing a silent reset and continue of the hung context. This requires the i915 driver provide a golden context to GuC in the ADS. v2: (Matthew Brost): - Fix memory corruption in shmem_read (John H) - Use locals rather than defines for LR_* + SKIP_SIZE Signed-off-by:
-
John Harrison authored
Added the scheduling policy parameters to the 'guc_info' debugfs state dump. Signed-off-by:
-
John Harrison authored
Changing the reset module parameter has no effect on a running GuC. The corresponding entry in the ADS must be updated and then the GuC informed via a Host2GuC message. The new debugfs interface to module parameters allows this to happen. However, connecting the parameter data address back to anything useful is messy. One option would be to pass a new private data structure address through instead of just the parameter pointer. However, that means having a new (and different) data structure for each parameter and a new (and different) write function for each parameter. This method keeps everything generic by instead using a string lookup on the directory entry name. Signed-off-by:
-
John Harrison authored
Use the official driver default scheduling policies for configuring the GuC scheduler rather than a bunch of hardcoded values. v2: (Matthew Brost) - Move I915_ENGINE_WANT_FORCED_PREEMPTION to later patch Signed-off-by:
-
John Harrison authored
In the case of a full GPU reset (e.g. because GuC has died or because GuC's hang detection has been disabled), the driver can't rely on GuC reporting the guilty context. Instead, the driver needs to scan all active contexts and find one that is currently executing, as per the execlist mode behaviour. In GuC mode, this scan is different to execlist mode as the active request list is handled very differently. Similarly, the request state dump in debugfs needs to be handled differently when in GuC submission mode. Also refactured some of the request scanning code to avoid duplication across the multiple code paths that are now replicating it. Signed-off-by:
-
Matthew Brost authored
We receive notification of an engine reset from GuC at its completion. Meaning GuC has potentially cleared any HW state we may have been interested in capturing. GuC resumes scheduling on the engine post-reset, as the resets are meant to be transparent, further muddling our error state. There is ongoing work to define an API for a GuC debug state dump. The suggestion for now is to manually disable FW initiated resets in cases where debug state is needed. Signed-off-by:
-
John Harrison authored
Clear the 'disable resets' flag to allow GuC to reset hung contexts (detected via pre-emption timeout). Signed-off-by:
-
John Harrison authored
It is impossible to seal all race conditions of resets occurring concurrent to other operations. At least, not without introducing excesive mutex locking. Instead, don't complain if it occurs. In particular, don't complain if trying to send a H2G during a reset. Whatever the H2G was about should get redone once the reset is over. Signed-off-by:
-
John Harrison authored
The driver must provide GuC with a list of mmio registers that should be saved/restored during a GuC-based engine reset. Unfortunately, the list must be dynamically allocated as its size is variable. That means the driver must generate the list twice - once to work out the size and a second time to actually save it. v2: (Alan / CI) - GEN7_GT_MODE -> GEN6_GT_MODE to fix WA selftest failure Signed-off-by:
Fernando Pacheco <fernando.pacheco@intel.com> Signed-off-by:
-
Matthew Brost authored
The GuC can implement execution qunatums, detect hung contexts and other such things but it requires the timer expired interrupt to do so. Signed-off-by:
-
Matthew Brost authored
GuC will notify the driver, via G2H, if it fails to reset an engine. We recover by resorting to a full GPU reset. v2: (John Harrison): - s/drm_dbg/drm_err Signed-off-by:
-
Matthew Brost authored
GuC will issue a reset on detecting an engine hang and will notify the driver via a G2H message. The driver will service the notification by resetting the guilty context to a simple state or banning it completely. v2: (John Harrison) - Move msg[0] lookup after length check v3: (John Harrison) - s/drm_dbg/drm_err Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Matthew Brost authored
The new GuC interface introduces an MMIO H2G command, INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This MMIO tears down any active contexts generating a context reset G2H CTB for each. Once that step completes the GuC tears down the CTB channels. It is safe to suspend once this MMIO H2G command completes and all G2H CTBs have been processed. In practice the i915 will likely never receive a G2H as suspend should only be called after the GPU is idle. Resume is implemented in the same manner as before - simply reload the GuC firmware and reinitialize everything (e.g. CTB channels, contexts, etc..). v2: (Michel / John H) - INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507 Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Add disable GuC interrupts to intel_guc_sanitize(). Part of this requires moving the guc_*_interrupt wrapper function into header file intel_guc.h. Signed-off-by:
-
Matthew Brost authored
If submission is disabled by the backend for any reason, reset the GPU immediately in the heartbeat code as the backend can't be reenabled until the GPU is reset. Signed-off-by:
-
Matthew Brost authored
Reset implementation for new GuC interface. This is the legacy reset implementation which is called when the i915 owns the engine hang check. Future patches will offload the engine hang check to GuC but we will continue to maintain this legacy path as a fallback and this code path is also required if the GuC dies. With the new GuC interface it is not possible to reset individual engines - it is only possible to reset the GPU entirely. This patch forces an entire chip reset if any engine hangs. v2: (Michal) - Check for -EPIPE rather than -EIO (CT deadlock/corrupt check) v3: (John H) - Split into a series of smaller patches v4: (John H) - Fix typo - Add braces around if statements in reset code v5: (Checkpatch) - Fix warnings Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Move active request tracking to a backend vfunc rather than assuming all backends want to do this in the manner. In the of case execlists / ring submission the tracking is on the physical engine while with GuC submission it is on the context. Signed-off-by:
-
Matthew Brost authored
This is required to allow backend specific cleanup v2: (John H) - Rework commit message Signed-off-by:
-
Matthew Brost authored
With GuC virtual engines the physical engine which a request executes and completes on isn't known to the i915. Therefore we can't attach a request to a physical engines breadcrumbs. To work around this we create a single breadcrumbs per engine class when using GuC submission and direct all physical engine interrupts to this breadcrumbs. v2: (John H) - Rework header file structure so intel_engine_mask_t can be in intel_engine_types.h Signed-off-by: -
Matthew Brost authored
Update the bonding extension to return -ENODEV when using GuC submission as this extension fundamentally will not work with the GuC submission interface. Signed-off-by:
-
Matthew Brost authored
Hold a reference to the intel_context over life of an i915_request. Without this an i915_request can exist after the context has been destroyed (e.g. request retired, context closed, but user space holds a reference to the request from an out fence). In the case of GuC submission + virtual engine, the engine that the request references is also destroyed which can trigger bad pointer dref in fence ops (e.g. i915_fence_get_driver_name). We could likely change i915_fence_get_driver_name to avoid touching the engine but let's just be safe and hold the intel_context reference. v2: (John Harrison) - Update comment explaining how GuC mode and execlists mode deal with virtual engines differently Signed-off-by: -
John Harrison authored
The serial number tracking of engines happens at the backend of request submission and was expecting to only be given physical engines. However, in GuC submission mode, the decomposition of virtual to physical engines does not happen in i915. Instead, requests are submitted to their virtual engine mask all the way through to the hardware (i.e. to GuC). This would mean that the heart beat code thinks the physical engines are idle due to the serial number not incrementing. Which in turns means hangcheck does not work for GuC virtual engines. This patch updates the tracking to decompose virtual engines into their physical constituents and tracks the request against each. This is not entirely accurate as the GuC will only be issuing the request to one physical engine. However, it is the best that i915 can do given that it has no knowledge of the GuC's scheduling decisions. Downside of this is that all physical engines constituting a GuC virtual engine will be periodically unparked (even during just a single context executing) in order to be pinged with a heartbeat request. However the power and performance cost of this is not expected to be measurable (due low frequency of heartbeat pulses) and it is considered an easier option than trying to make changes to GuC firmware. v2: (Tvrtko) - Update commit message - Have default behavior if no vfunc present Signed-off-by:
-
Matthew Brost authored
Implement GuC virtual engines. Rather simple implementation, basically just allocate an engine, setup context enter / exit function to virtual engine specific functions, set all other variables / functions to guc versions, and set the engine mask to that of all the siblings. v2: Update to work with proto-ctx v3: (Daniele) - Drop include, add comment to intel_virtual_engine_has_heartbeat Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
- 27 Jul, 2021 2 commits
-
-
Matthew Auld authored
EHL and JSL add the 'Bypass LLC' MOCS entry, which should make it possible for userspace to bypass the GTT caching bits set by the kernel, as per the given object cache_level. This is troublesome since the heavy flush we apply when first acquiring the pages is skipped if the kernel thinks the object is coherent with the GPU. As a result it might be possible to bypass the cache and read the contents of the page directly, which could be stale data. If it's just a case of userspace shooting themselves in the foot then so be it, but since i915 takes the stance of always zeroing memory before handing it to userspace, we need to prevent this. v2: this time actually set cache_dirty in put_pages() v3: move to get_pages() which looks simpler BSpec: 34007 References: 04609175 ("Revert "drm/i915/ehl: Update MOCS table for EHL"") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: Francisco Jerez <francisco.jerez.plata@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-2-matthew.auld@intel.com
-
Matthew Auld authored
Try to document the object caching related bits, like cache_coherent and cache_dirty. v2(Ville): - As pointed out by Ville, fix the completely incorrect assumptions about the "partial" coherency on shared LLC platforms. v3(Daniel): - Fix nonsense about "dirtying" the cache with reads. v4(Daniel): - Various improvements, including adding some more details for WT. Suggested-by:
-
