Warning counts are not used anywhere in the kernel. In addition, there
are no use cases, test coverage, or documentation for this functionality.
Remove the 'warnings' field from struct xfs_dquot_res and any other
related code.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Warning limits in xfs quota is an unused feature that is currently
documented as unimplemented, and it is unclear what the intended
behavior of these limits are. Remove the ‘warn’ field from struct
xfs_quota_limits and any other related code.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Merge tag 'reflink-speedups-5.19_2022-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.19-for-next

xfs: fix reflink inefficiencies

As Dave Chinner has complained about on IRC, there are a couple of
things about reflink that are very inefficient.  First of all, we
limited the size of all bunmapi operations to avoid flooding the log
with defer ops in the worst case, but recent changes to the defer
ops code have solved that problem, so get rid of the bunmapi length
clamp.

Second, the log reservations for reflink operations are far far
larger than they need to be.  Shrink them to exactly what we need to
handle each deferred RUI and CUI log item, and no more.  Also reduce
logcount because we don't need 8 rolls per operation.  Introduce a
transaction reservation compatibility layer to avoid changing the
minimum log size calculations.
Signed-off-by: Dave Chinner <david@fromorbit.com>

Merge tag 'rmap-speedups-5.19_2022-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.19-for-next

xfs: fix rmap inefficiencies

Reduce the performance impact of the reverse mapping btree when
reflink is enabled by using the much faster non-overlapped btree
lookup functions when we're searching the rmap index with a fully
specified key.  If we find the exact record we're looking for,
great!  We don't have to perform the full overlapped scan.  For
filesystems with high sharing factors this reduces the xfs_scrub
runtime by a good 15%%.

This has been shown to reduce the fstests runtime for realtime rmap
configurations by 30%%, since the lack of AGs severely limits
scalability.
Signed-off-by: Dave Chinner <david@fromorbit.com>

We don't check that the v4 feature flags taht v5 requires to be set
are actually set anywhere. Do this check when we see that the
filesystem is a v5 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

While xfs_has_nlink() is not used in kernel, it is used in userspace
(e.g. by xfs_db) so we need to set the XFS_FEAT_NLINK flag correctly
in xfs_sb_version_to_features().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs_repair catches fork size/format mismatches, but the in-kernel
verifier doesn't, leading to null pointer failures when attempting
to perform operations on the fork. This can occur in the
xfs_dir_is_empty() where the in-memory fork format does not match
the size and so the fork data pointer is accessed incorrectly.

Note: this causes new failures in xfs/348 which is testing mode vs
ftype mismatches. We now detect a regular file that has been changed
to a directory or symlink mode as being corrupt because the data
fork is for a symlink or directory should be in local form when
there are only 3 bytes of data in the data fork. Hence the inode
verify for the regular file now fires w/ -EFSCORRUPTED because
the inode fork format does not match the format the corrupted mode
says it should be in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

To catch the obvious graph cycle problem and hence potential endless
looping.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

When we log modifications based on intents, we add both intent
and intent done items to the modification being made. These get
written to the log to ensure that the operation is re-run if the
intent done is not found in the log.

However, for operations that complete wholly within a single
checkpoint, the change in the checkpoint is atomic and will never
need replay. In this case, we don't need to actually write the
intent and intent done items to the journal because log recovery
will never need to manually restart this modification.

Log recovery currently handles intent/intent done matching by
inserting the intent into the AIL, then removing it when a matching
intent done item is found. Hence for all the intent-based operations
that complete within a checkpoint, we spend all that time parsing
the intent/intent done items just to cancel them and do nothing with
them.

Hence it follows that the only time we actually need intents in the
log is when the modification crosses checkpoint boundaries in the
log and so may only be partially complete in the journal. Hence if
we commit and intent done item to the CIL and the intent item is in
the same checkpoint, we don't actually have to write them to the
journal because log recovery will always cancel the intents.

We've never really worried about the overhead of logging intents
unnecessarily like this because the intents we log are generally
very much smaller than the change being made. e.g. freeing an extent
involves modifying at lease two freespace btree blocks and the AGF,
so the EFI/EFD overhead is only a small increase in space and
processing time compared to the overall cost of freeing an extent.

However, delayed attributes change this cost equation dramatically,
especially for inline attributes. In the case of adding an inline
attribute, we only log the inode core and attribute fork at present.
With delayed attributes, we now log the attr intent which includes
the name and value, the inode core adn attr fork, and finally the
attr intent done item. We increase the number of items we log from 1
to 3, and the number of log vectors (regions) goes up from 3 to 7.
Hence we tripple the number of objects that the CIL has to process,
and more than double the number of log vectors that need to be
written to the journal.

At scale, this means delayed attributes cause a non-pipelined CIL to
become CPU bound processing all the extra items, resulting in a > 40%
performance degradation on 16-way file+xattr create worklaods.
Pipelining the CIL (as per 5.15) reduces the performance degradation
to 20%, but now the limitation is the rate at which the log items
can be written to the iclogs and iclogs be dispatched for IO and
completed.

Even log IO completion is slowed down by these intents, because it
now has to process 3x the number of items in the checkpoint.
Processing completed intents is especially inefficient here, because
we first insert the intent into the AIL, then remove it from the AIL
when the intent done is processed. IOWs, we are also doing expensive
operations in log IO completion we could completely avoid if we
didn't log completed intent/intent done pairs.

Enter log item whiteouts.

When an intent done is committed, we can check to see if the
associated intent is in the same checkpoint as we are currently
committing the intent done to. If so, we can mark the intent log
item with a whiteout and immediately free the intent done item
rather than committing it to the CIL. We can basically skip the
entire formatting and CIL insertion steps for the intent done item.

However, we cannot remove the intent item from the CIL at this point
because the unlocked per-cpu CIL item lists do not permit removal
without holding the CIL context lock exclusively. Transaction commit
only holds the context lock shared, hence the best we can do is mark
the intent item with a whiteout so that the CIL push can release it
rather than writing it to the log.

This means we never write the intent to the log if the intent done
has also been committed to the same checkpoint, but we'll always
write the intent if the intent done has not been committed or has
been committed to a different checkpoint. This will result in
correct log recovery behaviour in all cases, without the overhead of
logging unnecessary intents.

This intent whiteout concept is generic - we can apply it to all
intent/intent done pairs that have a direct 1:1 relationship. The
way deferred ops iterate and relog intents mean that all intents
currently have a 1:1 relationship with their done intent, and hence
we can apply this cancellation to all existing intent/intent done
implementations.

For delayed attributes with a 16-way 64kB xattr create workload,
whiteouts reduce the amount of journalled metadata from ~2.5GB/s
down to ~600MB/s and improve the creation rate from 9000/s to
14000/s.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

When we release an intent that a whiteout applies to, it will not
have been committed to the journal and so won't be in the AIL. Hence
when we drop the last reference to the intent, we do not want to try
to remove it from the AIL as that will trigger a filesystem
shutdown. Hence make the removal of intents from the AIL conditional
on them actually being in the AIL so we do the correct thing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

To apply a whiteout to an intent item when an intent done item is
committed, we need to be able to retrieve the intent item from the
the intent done item. Add a log item op method for doing this, and
wire all the intent done items up to it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>

In preparation for adding support for intent item whiteouts.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Intent whiteouts will require extra work to be done during
transaction commit if the transaction contains an intent done item.

To determine if a transaction contains an intent done item, we want
to avoid having to walk all the items in the transaction to check if
they are intent done items. Hence when we add an intent done item to
a transaction, tag the transaction to indicate that it contains such
an item.

We don't tag the transaction when the defer ops is relogging an
intent to move it forward in the log. Whiteouts will never apply to
these cases, so we don't need to bother looking for them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>

We currently have a couple of helper functions that try to infer
whether the log item is an intent or intent done item from the
combinations of operations it supports.  This is incredibly fragile
and not very efficient as it requires checking specific combinations
of ops.

We need to be able to identify intent and intent done items quickly
and easily in upcoming patches, so simply add intent and intent done
type flags to the log item ops flags. These are static flags to
begin with, so intent items should have been typed like this from
the start.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

If the first operation in a string of defer ops has no intents,
then there is no reason to commit it before running the first call
to xfs_defer_finish_one(). This allows the defer ops to be used
effectively for non-intent based operations without requiring an
unnecessary extra transaction commit when first called.

This fixes a regression in per-attribute modification transaction
count when delayed attributes are not being used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Callers currently have to round out the size of buffers to match the
aligment constraints of log iovecs and xlog_write(). They should not
need to know this detail, so introduce a new function to calculate
the iovec length (for use in ->iop_size implementations). Also
modify xlog_finish_iovec() to round up the length to the correct
alignment so the callers don't need to do this, either.

Convert the only user - inode forks - of this alignment rounding to
use the new interface.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Ever since we added shadown format buffers to the log items, log
items need to handle the item being released with shadow buffers
attached. Due to the fact this requirement was added at the same
time we added new rmap/reflink intents, we missed the cleanup of
those items.

In theory, this means shadow buffers can be leaked in a very small
window when a shutdown is initiated. Testing with KASAN shows this
leak does not happen in practice - we haven't identified a single
leak in several years of shutdown testing since ~v4.8 kernels.

However, the intent whiteout cleanup mechanism results in every
cancelled intent in exactly the same state as this tiny race window
creates and so if intents down clean up shadow buffers on final
release we will leak the shadow buffer for just about every intent
we create.

Hence we start with this patch to close this condition off and
ensure that when whiteouts start to be used we don't leak lots of
memory.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

When we first allocate or resize an inline inode fork, we round up
the allocation to 4 byte alingment to make journal alignment
constraints. We don't clear the unused bytes, so we can copy up to
three uninitialised bytes into the journal. Zero those bytes so we
only ever copy zeros into the journal.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

These functions return the maximum number of blocks that could be logged
in a particular transaction.  "log count" is confusing since there's a
separate concept of a log (operation) count in the reservation code, so
let's change it to "block count" to be less confusing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Currently, the code that performs CoW remapping after a write has this
odd behavior where it walks /backwards/ through the data fork to remap
extents in reverse order.  Earlier, we rewrote the reflink remap
function to use deferred bmap log items instead of trying to cram as
much into the first transaction that we could.  Now do the same for the
CoW remap code.  There doesn't seem to be any performance impact; we're
just making better use of code that we added for the benefit of reflink.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Before to the introduction of deferred refcount operations, reflink
would try to cram refcount btree updates into the same transaction as an
allocation or a free event.  Mainline XFS has never actually done that,
but we never refactored the transaction reservations to reflect that we
now do all refcount updates in separate transactions.  Fix this to
reduce the transaction reservation size even farther, so that between
this patch and the previous one, we reduce the tr_write and tr_itruncate
sizes by 66%.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Back in the early days of reflink and rmap development I set the
transaction reservation sizes to be overly generous for rmap+reflink
filesystems, and a little under-generous for rmap-only filesystems.

Since we don't need *eight* transaction rolls to handle three new log
intent items, decrease the logcounts to what we actually need, and amend
the shadow reservation computation function to reflect what we used to
do so that the minimum log size doesn't change.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Move the tracepoint that computes the size of the transaction used to
compute the minimum log size into xfs_log_get_max_trans_res so that we
only have to compute this stuff once.

Leave xfs_log_get_max_trans_res as a non-static function so that xfs_db
can call it to report the results of the userspace computation of the
same value to diagnose mkfs/kernel misinteractions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Every time someone changes the transaction reservation sizes, they
introduce potential compatibility problems if the changes affect the
minimum log size that we validate at mount time.  If the minimum log
size gets larger (which should be avoided because doing so presents a
serious risk of log livelock), filesystems created with old mkfs will
not mount on a newer kernel; if the minimum size shrinks, filesystems
created with newer mkfs will not mount on older kernels.

Therefore, enable the creation of a shadow log reservation structure
where we can "undo" the effects of tweaks when computing minimum log
sizes.  These shadow reservations should never be used in practice, but
they insulate us from perturbations in minimum log size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

This raw call isn't necessary since we can always remove a full delalloc
extent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

In commit e1a4e37c, we clamped the length of bunmapi calls on the
data forks of shared files to avoid two failure scenarios: one where the
extent being unmapped is so sparsely shared that we exceed the
transaction reservation with the sheer number of refcount btree updates
and EFI intent items; and the other where we attach so many deferred
updates to the transaction that we pin the log tail and later the log
head meets the tail, causing the log to livelock.

We avoid triggering the first problem by tracking the number of ops in
the refcount btree cursor and forcing a requeue of the refcount intent
item any time we think that we might be close to overflowing.  This has
been baked into XFS since before the original e1a4 patch.

A recent patchset fixed the second problem by changing the deferred ops
code to finish all the work items created by each round of trying to
complete a refcount intent item, which eliminates the long chains of
deferred items (27dad); and causing long-running transactions to relog
their intent log items when space in the log gets low (74f4d).

Because this clamp affects /any/ unmapping request regardless of the
sharing factors of the component blocks, it degrades the performance of
all large unmapping requests -- whereas with an unshared file we can
unmap millions of blocks in one go, shared files are limited to
unmapping a few thousand blocks at a time, which causes the upper level
code to spin in a bunmapi loop even if it wasn't needed.

This also eliminates one more place where log recovery behavior can
differ from online behavior, because bunmapi operations no longer need
to requeue.  The fstest generic/447 was created to test the old fix, and
it still passes with this applied.

Partial-revert-of: e1a4e37c ("xfs: try to avoid blowing out the transaction reservation when bunmaping a shared extent")
Depends: 27dada07 ("xfs: change the order in which child and parent defer ops ar finished")
Depends: 74f4d6a1 ("xfs: only relog deferred intent items if free space in the log gets low")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

A long time ago, I added to XFS the ability to use deferred reference
count operations as part of a transaction chain.  This enabled us to
avoid blowing out the transaction reservation when the blocks in a
physical extent all had different reference counts because we could ask
the deferred operation manager for a continuation, which would get us a
clean transaction.

The refcount code asks for a continuation when the number of refcount
record updates reaches the point where we think that the transaction has
logged enough full btree blocks due to refcount (and free space) btree
shape changes and refcount record updates that we're in danger of
overflowing the transaction.

We did not previously count the EFIs logged to the refcount update
transaction because the clamps on the length of a bunmap operation were
sufficient to avoid overflowing the transaction reservation even in the
worst case situation where every other block of the unmapped extent is
shared.

Unfortunately, the restrictions on bunmap length avoid failure in the
worst case by imposing a maximum unmap length of ~3000 blocks, even for
non-pathological cases.  This seriously limits performance when freeing
large extents.

Therefore, track EFIs with the same counter as refcount record updates,
and use that information as input into when we should ask for a
continuation.  This enables the next patch to drop the clumsy bunmap
limitation.

Depends: 27dada07 ("xfs: change the order in which child and parent defer ops ar finished")
Depends: 74f4d6a1 ("xfs: only relog deferred intent items if free space in the log gets low")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Reverse mapping on a reflink-capable filesystem has some pretty high
overhead when performing file operations.  This is because the rmap
records for logically and physically adjacent extents might not be
adjacent in the rmap index due to data block sharing.  As a result, we
use expensive overlapped-interval btree search, which walks every record
that overlaps with the supplied key in the hopes of finding the record.

However, profiling data shows that when the index contains a record that
is an exact match for a query key, the non-overlapped btree search
function can find the record much faster than the overlapped version.
Try the non-overlapped lookup first when we're trying to find the left
neighbor rmap record for a given file mapping, which makes unwritten
extent conversion and remap operations run faster if data block sharing
is minimal in this part of the filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Reverse mapping on a reflink-capable filesystem has some pretty high
overhead when performing file operations.  This is because the rmap
records for logically and physically adjacent extents might not be
adjacent in the rmap index due to data block sharing.  As a result, we
use expensive overlapped-interval btree search, which walks every record
that overlaps with the supplied key in the hopes of finding the record.

However, profiling data shows that when the index contains a record that
is an exact match for a query key, the non-overlapped btree search
function can find the record much faster than the overlapped version.
Try the non-overlapped lookup first, which will make scrub run much
faster.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Most callers of xfs_rmap_lookup_le will retrieve the btree record
immediately if the lookup succeeds.  The overlapped version of this
function (xfs_rmap_lookup_le_range) will return the record if the lookup
succeeds, so make the regular version do it too.  Get rid of the useless
len argument, since it's not part of the lookup key.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Record the buffer ops in the xfs_buf tracepoints so that we can monitor
the alleged type of the buffer.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

This reverts commit 4b8628d5.

XFS quota has had the concept of a "quota warning limit" since
the earliest Irix implementation, but a mechanism for incrementing
the warning counter was never implemented, as documented in the
xfs_quota(8) man page. We do know from the historical archive that
it was never incremented at runtime during quota reservation
operations.

With this commit, the warning counter quickly increments for every
allocation attempt after the user has crossed a quote soft
limit threshold, and this in turn transitions the user to hard
quota failures, rendering soft quota thresholds and timers useless.
This was reported as a regression by users.

Because the intended behavior of this warning counter has never been
understood or documented, and the result of this change is a regression
in soft quota functionality, revert this commit to make soft quota
limits and timers operable again.

Fixes: 4b8628d5 ("xfs: actually bump warning counts when we send warnings)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

The filestream AG selection loop uses pagf data to aid in AG
selection, which depends on pagf initialization. If the in-core
structure is not initialized, the caller invokes the AGF read path
to do so and carries on. If another task enters the loop and finds
a pagf init already in progress, the AGF read returns -EAGAIN and
the task continues the loop. This does not increment the current ag
index, however, which means the task spins on the current AGF buffer
until unlocked.

If the AGF read I/O submitted by the initial task happens to be
delayed for whatever reason, this results in soft lockup warnings
via the spinning task. This is reproduced by xfs/170. To avoid this
problem, fix the AGF trylock failure path to properly iterate to the
next AG. If a task iterates all AGs without making progress, the
trylock behavior is dropped in favor of blocking locks and thus a
soft lockup is no longer possible.

Fixes: f48e2df8 ("xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Provide a proper stub for the !CONFIG_XFS_POSIX_ACL case.

Also use a easy way for xfs_get_acl stub.
Suggested-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: Large extent counters

The commit xfs: fix inode fork extent count overflow
(3f8a4f1d) mentions that 10 billion
data fork extents should be possible to create. However the
corresponding on-disk field has a signed 32-bit type. Hence this
patchset extends the per-inode data fork extent counter to 64 bits
(out of which 48 bits are used to store the extent count).

Also, XFS has an attribute fork extent counter which is 16 bits
wide. A workload that,
1. Creates 1 million 255-byte sized xattrs,
2. Deletes 50% of these xattrs in an alternating manner,
3. Tries to insert 400,000 new 255-byte sized xattrs
   causes the xattr extent counter to overflow.

Dave tells me that there are instances where a single file has more
than 100 million hardlinks. With parent pointers being stored in
xattrs, we will overflow the signed 16-bits wide attribute extent
counter when large number of hardlinks are created. Hence this
patchset extends the on-disk field to 32-bits.

The following changes are made to accomplish this,
1. A 64-bit inode field is carved out of existing di_pad and
   di_flushiter fields to hold the 64-bit data fork extent counter.
2. The existing 32-bit inode data fork extent counter will be used to
   hold the attribute fork extent counter.
3. A new incompat superblock flag to prevent older kernels from mounting
   the filesystem.
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>