- 12 Jun, 2012 7 commits
-
-
Adnan Ali authored
This commit fixes coding style issues related to string split across the lines and space before tab at start of line. Signed-off-by:
Adnan Ali <adnan.ali@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adnan Ali authored
This commit fixes coding style issues including quoted string across multiple lines. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bart Westgeest authored
Updated out-of-date comment describing VHCI_NPORT Signed-off-by:
Bart Westgeest <bart@elbrys.com> Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
Miguel Gómez <magomez@igalia.com> Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
-
Miguel Gómez authored
Check for MODULE is not needed. In a static compilation the parameters definition is valid and module_exit() does nothing. Signed-off-by:
-
- 11 Jun, 2012 23 commits
-
-
Ian Abbott authored
The source code defines a macro NULLFUNC #define NULLFUNC 0 and uses it as a generic null function pointer constant. This is superfluous. Just use NULL instead. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
The source code defines a macro NULLFUNC #define NULLFUNC 0 and uses it as a generic null function pointer constant. This is superfluous. Just use NULL instead. Signed-off-by:
-
Dan Carpenter authored
This side of the if else statement returned with the lock held and IRQs disabled. Signed-off-by:
-
H Hartley Sweeten authored
Quiet a number of sparse warnings in this file: warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
-
H Hartley Sweeten authored
This quiets a couple sparse warnings about: warning: dubious: !x | !y warning: dubious: x | !y Also, remove the unnecessary parentheses abound the variables. Signed-off-by:
-
H Hartley Sweeten authored
This quiets a couple sparse warnings about: warning: dubious: !x & y Also, remove the unnecessary parentheses around the variables. Signed-off-by:
-
H Hartley Sweeten authored
Move the comedi_unlocked_ioctl function in order to remove most of the forward declarations in this file. Signed-off-by:
-
Julia Lawall authored
TRIG_ROUND_NEAREST is 0, so a bit-and with it is always false. The value TRIG_ROUND_MASK covers the bits of the TRIG_ROUND constants, so first pick those bits and then make the test using ==. The same is done for TRIG_ROUND_UP for symmetry, even though bit-and would be sufficient in this case. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
H Hartley Sweeten authored
When starting the acquisition the labpc_ai_cmd function was exiting without unlocking the spinlock. This results in a sparse warning: warning: context imbalance in 'labpc_ai_cmd' - different lock contexts for basic block Add the missing spin_unlock_irqrestore calls. Signed-off-by:
-
H Hartley Sweeten authored
Make the comedi sysfs functions a bit more concise by shortening some of the verbose variable names and reusing some of the variables that were used for intermediate calculations. Signed-off-by:
-
Ian Abbott authored
Add a comment to comedi_recognize() to describe what it does as it's a bit confusing. Signed-off-by:
-
Ian Abbott authored
This code is used by some combination of the CONFIG_COMEDI_DAS08_CS, CONFIG_COMEDI_DAS08_ISA, and CONFIG_COMEDI_DAS08_PCI and contains a lot of conditional compilation. Remove most of the conditional compilation, relying on the compiler to optimize out unused static functions and data. Use the '__maybe_unused' tag for those functions that cause compiler warnings as a result of this. Also change the DO_COMEDI_DRIVER_REGISTER macro from a conditionally defined macro to a manifest constant macro to allow it to be tested outside the preprocessor (although this is not currently needed). Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Paul Bolle authored
Commit f80a3f62 ("Staging: strip: delete the driver") left if_strip.h unused: nothing in the tree includes it anymore. It is still exported, but since nothing in the kernel uses struct MetricomAddress, that seems pointless. Delete this header too. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Natanael Copa authored
The header files should be included in generated tarballs for archives. Signed-off-by:
Natanael Copa <ncopa@alpinelinux.org> Signed-off-by:
-
Sam Hansen authored
Using the __aligned() attribute in favor of __attribute__((aligned(size))) Signed-off-by:
Sam Hansen <solid.se7en@gmail.com> Signed-off-by:
-
Sam Hansen authored
Porting zram to use the pr_warn() function instead of the deprecated pr_warning(). Signed-off-by:
-
Nitin Gupta authored
Documentation of various struct page fields used by zsmalloc. Changes for v2: - Regroup descriptions as suggested by Konrad Signed-off-by:
Nitin Gupta <ngupta@vflare.org> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Minchan Kim authored
xvmalloc can't handle PAGE_SIZE page so that zram have to handle it specially but zsmalloc can do it so let's remove unnecessary special handling code. Quote from Nitin "I think page vs handle distinction was added since xvmalloc could not handle full page allocation. Now that zsmalloc allows full page allocation, we can just use it for both cases. This would also allow removing the ZRAM_UNCOMPRESSED flag. The only downside will be slightly slower code path for full page allocation but this event is anyways supposed to be rare, so should be fine." 1. This patch reduces code very much. drivers/staging/zram/zram_drv.c | 104 +++++-------------------------------- drivers/staging/zram/zram_drv.h | 17 +----- drivers/staging/zram/zram_sysfs.c | 6 +-- 3 files changed, 15 insertions(+), 112 deletions(-) 2. change pages_expand with bad_compress so it can count bad compression(above 75%) ratio. 3. remove zobj_header which is for back-reference for defragmentation because firstly, it's not used at the moment and zsmalloc can't handle bigger size than PAGE_SIZE so zram can't do it any more without redesign. Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Minchan Kim authored
fd1a30de makes a bug that it uses (struct page *) as zsmalloc's handle although it's a uncompressed page so that it can access random page, return random data or even crashed by get_first_page in zs_map_object. Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Minchan Kim authored
We should use unsigned long as handle instead of void * to avoid any confusion. Without this, users may just treat zs_malloc return value as a pointer and try to deference it. This patch passed compile test(zram, zcache and ramster) and zram is tested on qemu. changelog * from v2 - remove hval pointed out by Nitin - based on next-20120607 * from v1 - change zcache's zv_create return value - baesd on next-20120604 Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Acked-by:
-
Dan Carpenter authored
These two places seem like they should be using bitwise OR instead of bitwise AND. The first one is a noop which is equivalent to: imr |= (0x0100 & 0x0004 & 0x0001); The second is sets lcr2 to zero instead of just clearing the high bits. lcr2 &= (0x00F0 & 0x000F); Signed-off-by:
-
Adnan Ali authored
This commit fixes coding style issues including braces position and line wrapping. Signed-off-by:
Jannis Pohlmann <jannis.pohlmann@codethink.co.uk> Acked-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Andy Gross authored
Failures during the dmm probe can cause the kernel to crash. Moved the spinlock to a global and moved list initializations immediately after the allocation of the dmm private structure. Signed-off-by:
Andy Gross <andy.gross@ti.com> Reviewed-by:
Rob Clark <rob.clark@linaro.org> Signed-off-by:
-
- 09 Jun, 2012 9 commits
-
-
Miguel Gómez authored
Use DEFINE_PCI_DEVICE_TABLE() to create the device table and add MODULE_DEVICE_TABLE() to export it. Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
-
Miguel Gómez authored
Remove the error_flag field from the ipoctal structure, as the error code is handled through the tty abstraction. Remove the values definition as well. Signed-off-by:
-
Miguel Gómez authored
The configuration of the communication channel is handled by the tty abstraction, so the ipoctal_config structure has become useless and it's only used to store values that are never accesed. Remove it. Signed-off-by:
-
Miguel Gómez authored
Remove the gotos when handling error conditions, as the code gets clearer and the gotos are not really avoiding code replication. Signed-off-by:
-
Miguel Gómez authored
Remove the "out" label from tpci200_request_irq(), as it can directly return the error code instead of jumping. Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
-
Miguel Gómez authored
Remove the "out" label from tpci200_slot_map_space(), as it can directly return the error code instead of jumping. Signed-off-by:
-
Miguel Gómez authored
Handle error conditions with simple returns instead of usig gotos. Signed-off-by:
-
- 07 Jun, 2012 1 commit
-
-
Leed Aguilar authored
The raw data reading process (ak8975_read_axis) sets the single measurement mode to take a sample and once the conversion is completed the device enters into power-down mode automatically, therefore there is no need to enable a flag for this to happen. Signed-off-by:
Leed Aguilar <leed.aguilar@ti.com> Acked-by:
Jonathan Cameron <jic23@kernel.org> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
