- 25 Jan, 2019 23 commits
-
-
Akinobu Mita authored
This driver doesn't set all members of mbus format field when the VIDIOC_SUBDEV_{S,G}_FMT ioctls are called. This is detected by v4l2-compliance. Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Akinobu Mita authored
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE is specified. Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Akinobu Mita authored
This driver doesn't set all members of mbus format field when the VIDIOC_SUBDEV_{S,G}_FMT ioctls are called. This is detected by v4l2-compliance. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: -
Akinobu Mita authored
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE is specified. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
This adds log_status ioctl and event interface for mt9m001's v4l2 controls. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Register a sub-device to the asynchronous subdevice framework, and also create subdevice device node. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Create a source pad and set the media controller type to the sensor. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Remove remaining soc_camera specific code and drop soc_camera dependency from this driver. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Switch s_power() callback to runtime PM framework. This also removes soc_camera specific power management code and introduces reset and standby gpios instead. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Introduce multi_reg_write() to write multiple registers to the device and use it where possible. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Add of_match_table for the MT9M001 CMOS image sensor. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Sort header block alphabetically for easy maintenance. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Replace GPL license statements with SPDX license identifiers (GPL-2.0). This also fixes MODULE_LICENSE() ident to match the actual license text. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Akinobu Mita authored
Add device tree binding documentation for the MT9M001 CMOS image sensor. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Akinobu Mita authored
Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Ben Kao authored
We use put_unaligned_be16() to be simplified for setting register address in ov8856_read_reg() and use sizeof() to be better suited for bytes copying. Signed-off-by:
Ben Kao <ben.kao@intel.com> Signed-off-by:
-
Lubomir Rintel authored
This provides more power saving when the sensor is off. While at that, do the delay on power/clock enable even if the sensor driver itself doesn't control the GPIOs. This is required for the OLPC XO-1 platform, that lacks the proper power/reset properties in its DT, but needs the delay after the sensor is clocked up. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Lubomir Rintel authored
The commit 71862f63 ("media: ov7670: Add the ov7670_s_power function") added a power control routing. However, it was not good enough to use as a s_power() callback: it merely flipped on the power GPIOs without restoring the register settings. Fix this now and register an actual power callback. Signed-off-by:
-
Lubomir Rintel authored
This will allow us to restore the last set frame rate after the device returns from a power off. [sakari.ailus@linux.intel.com>: Wrap a line over 80 characters] Signed-off-by:
-
Lubomir Rintel authored
This will allow us to restore the last set format after the device returns from a power off. Signed-off-by:
-
Sakari Ailus authored
Instead of assigning the return value to ret and then checking and returning it, just return the value to the caller directly. The success value is always 0. Signed-off-by:
-
Ben Kao authored
This patch adds driver for Omnivision's ov8856 sensor, the driver supports following features: - manual exposure/gain(analog and digital) control support - two link frequencies - VBLANK/HBLANK support - test pattern support - media controller support - runtime PM support - enable Vsync signal output - supported resolutions + 3280x2464 at 30FPS + 1640x1232 at 30FPS Signed-off-by:
-
Luca Ceresoli authored
imx274_read_reg() is not used since commit ca017467 ("media: imx274: add helper to read multibyte registers"). Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
- 21 Jan, 2019 17 commits
-
-
Steve Longerbeam authored
Some imx platforms do not have fwnode connections to all CSI input ports, and should not be treated as an error. This includes the imx6q SabreAuto, which has no connections to ipu1_csi1 and ipu2_csi0. Return -ENOTCONN in imx_csi_parse_endpoint() so that v4l2-fwnode endpoint parsing will not treat an unconnected CSI input port as an error. Fixes: c893500a ("media: imx: csi: Register a subdev notifier") Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Tim Harvey <tharvey@gateworks.com> Cc: stable@vger.kernel.org Tested-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Steve Longerbeam authored
Implement the vidioc_(un)subscribe_event operations. Imx will allow subscribing to the imx-specific frame interval error events, events from subdevices (V4L2_EVENT_SOURCE_CHANGE), and control events. Signed-off-by:
-
Steve Longerbeam authored
In order to receive events generated by subdevices on the video capture nodes, those events need to be forwarded to the subdevice's list of reachable video capture devices. Note this will queue the event to a video device even if there is no actual _enabled_ media path from the sub-device to the video device. So a future improvement is to skip the video device if there is no enabled path to it from the sub-device. The entity->pipe pointer can't be used for this check because in imx-media a sub-device can be a member to more than one streaming pipeline at a time. Signed-off-by:
-
Philipp Zabel authored
The CSI, PRP ENC, and PRP VF subdevices shouldn't have to care about IDMAC line start address alignment. With compose rectangle support in the capture driver, they don't have to anymore. If the direct CSI -> IC path is enabled, the CSI output width must still be aligned to 8 pixels (IC burst length). Signed-off-by:
-
Philipp Zabel authored
Prepare for mbus format being smaller than the written rectangle due to burst size. Signed-off-by:
-
Philipp Zabel authored
Allowing to compose captured images into larger memory buffers will let us lift alignment restrictions on CSI crop width. For now all compose rectangles are identical to the complete frame width / height. This will be changed in the next patches. Signed-off-by:
-
Philipp Zabel authored
It is not correct to calculate decoder capture payload dynamically from the decoded frame width and height reported by the firmware. These tell us what the decoder wrote into the internal framebuffers. The rotator or VDOA always write the full sizeimage when copying the previously decoded frame from the internal framebuffers into the capture queue. Signed-off-by:
-
Philipp Zabel authored
Coda7541 and earlier do not support macroblock tiling. They do support the NV12 format, though. Enable macroblock tiling for NV12 only on CODA960. This fixes crashes when trying to use NV12 support on CodaHx4. Signed-off-by:
-
Souptick Joarder authored
This code is commented since version 3.7. If there is no plan to use it in future, we can remove this dead code. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Hans Verkuil authored
This was never implemented, so do not document this. Signed-off-by:
-
Hans Verkuil authored
The driver name as returned in v4l2_capabilities must be vimc, not vimc_capture. Fix this. Signed-off-by:
-
Steve Longerbeam authored
Switch to devm_kzalloc() when allocating the adv748x device struct. The sizeof() is updated to determine the correct allocation size from the dereferenced pointer type rather than hardcoding the struct type. [Kieran: Change sizeof() to dereference the pointer type] Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Paul Kocialkowski authored
It was reported that some cases of interleaved video decoding require using the current destination buffer as a reference. However, this is no longer possible after the move to vb2_find_timestamp because only dequeued and done buffers are considered. Add a helper in our driver that also considers the current destination buffer before resorting to vb2_find_timestamp and use it in MPEG-2. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Some leftover declarations are still in the cedrus_dec header although they were moved to cedrus_video already. Clean them up. Signed-off-by:
-
Niklas Söderlund authored
If the operation in rvin_set_channel_routing() is successful the 'ret' variable contains the runtime PM use count for the VIN master device. The intention is not to return the use count to the caller but to return 0 on success else none zero. Fix this by always returning 0 if the operation is successful. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Yangtao Li authored
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define bdisp_dbg_declare and hva_dbg_declare, so remove them. Also use DEFINE_SHOW_ATTRIBUTE to simplify some code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Reviewed-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
-
