txq_add_mgmt_pkt allocates memory while being called from atomic context
so needs to use GFP_ATOMIC
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "dyna_pci10xx" driver supports the Dynalog India PCI-1050.  There
seems to be very little online information available about this card,
but as far as I can tell[*], it only has 1 AO (analog output) channel,
not 16 AO channels as reported in the Comedi subdevice information.
Besides, the Comedi "insn_write" handler for the AO subdevice takes no
account of channel numbers.  Change the `n_chans` member of the AO
subdevice structure to 1 to reflect this.

[*] The card is no longer mentioned on the manufacturer's web-site and I
couldn't find any archived page for the site on archive.org.  I found
part of a scientific paper which describes the card as having a single
channel D/A converter:
<http://shodhganga.inflibnet.ac.in/bitstream/10603/150646/15/15_chapter%205.pdf>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the Comedi "attach" and "auto_attach" handlers that set up the Comedi
subdevices, there is no need to initialize the `len_chanlist` member of
Comedi subdevices that do not support Comedi asynchronous streaming
commands.  They can be left set to the initial zeroed out value and
the Comedi core will change the `len_chanlist` member to 1 afterwards in
that case.  The "dyna_pci10xx" driver currently sets the `len_chanlist`
members to the same value as the `n_chan` ("number of channels") member,
but this is unnecessary as none of them support asynchronous streaming.
Remove the initialization of `len_chanlist` from all the subdevices.
This will affect the information reported by the COMEDI_SUBDINFO ioctl
slightly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a TODO file which describes what needs to be done in order to
get the fieldbus_dev subsystem out of staging.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Anybus-S PROFINET IRT communication module provides instant integration
to any Ethernet based LAN via SMTP, FTP, HTTP as well as PROFINET and
Modbus-TCP. Additional protocols can be implemented on top of TCP/IP
or UDP using the transparent socket interface.

Official documentation:
https://www.anybus.com/docs/librariesprovider7/default-document-library
/manuals-design-guides/hms-hmsi-168-52.pdf

This implementation is an Anybus-S client driver, designed to be
instantiated by the Anybus-S bus driver when it discovers the Profinet
card.

If loaded successfully, the driver registers itself as a fieldbus_dev,
and userspace can access it through the fieldbus_dev interface.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arcx Inc. is an engineering company which provides advanced
embedded systems and consulting services.

Archronix is a technology design and product engineering firm
specializing in hardware control systems and enabling software.
Clients include OEM's in the transportation, aerospace,
medical and commercial sectors.

Websites:
	http://www.arcx.com/
	http://www.archronix.com/Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds devicetree binding documentation for the
Arcx anybus controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a driver for the Arcx anybus controller.

This device implements two Anybus-S hosts (buses),
and connects to the SoC via a parallel memory bus.
There is also a CAN power readout, unrelated to the Anybus,
modelled as a regulator.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Anybus-S/Anybus-M is a series of interchangeable fieldbus communication
modules featuring on board memory and processing power. All software and
hardware functionality required to communicate on the fieldbus is
incorporated in the module itself, allowing the application to focus on
other tasks.

Typical applications are frequency inverters, HMI and visualization
devices, instruments, scales, robotics, PLC’s and intelligent measuring
devices.

Official documentation:
https://www.anybus.com/docs/librariesprovider7/default-document-library/
manuals-design-guides/hms-hmsi-27-275.pdf
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fieldbus device (client) adapters allow data exchange with a PLC aka.
"Fieldbus Controller" over a fieldbus (Profinet, FLNet, etc.)

They are typically used when a Linux device wants to expose itself
as an actuator, motor, console light, switch, etc. over the fieldbus.

This framework is designed to provide a generic interface to Fieldbus
Devices from both the Linux Kernel and the userspace.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove an unused struct tx_pending_t, as it is never used in
kernel tree.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typedef in struct ieee_param, as the struct that
has elements that can reasonably be directly accessed
should never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typedef in struct ieee_param_ex, as the struct that
has elements that can reasonably be directly accessed should
never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When setting output power level called, the power level should be
checked by power amplifier level register and high power option. There
was todo about it. Add some variables for checking power level range.
The values that used for checking high power or minimum power are from
rf69 datasheets. The maximum power level is always same regardless of
mode.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove an exceptional & on function names, otherwise they are used as
pointers without &.

Issue suggested using Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning "CHECK: Please don't use multiple blank lines"
on upc.h
Signed-off-by: Cesar Santos <dev.cmsantos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not use uninitialized variable 'port' when printing an error message
Signed-off-by: Antti Keränen <detegr@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

size = struct_size(instance, entry, count);

or

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)

Based on the above, replace gdma_dma_alloc_desc() with kzalloc() and
use the new struct_size() helper.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crc16_ccitt() function does "BIT(0) << i" instead of "BIT(i)".
Using !! is slightly shorter than "foo ? 1: 0" and remove unnecessary
parentheses to make the code simple.

Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function name is otherwise used as pointers without &.

Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtlwifi/base.c: In function 'rtl_tx_agg_stop':
drivers/staging/rtlwifi/base.c:1733:23: warning:
 variable 'tid_data' set but not used [-Wunused-but-set-variable]

drivers/staging/rtlwifi/base.c: In function 'rtl_check_beacon_key':
drivers/staging/rtlwifi/base.c:2474:5: warning:
 variable 'ds_param_len' set but not used [-Wunused-but-set-variable]

drivers/staging/rtlwifi/base.c:2472:5: warning:
 variable 'ht_oper_len' set but not used [-Wunused-but-set-variable]

drivers/staging/rtlwifi/base.c:2470:5: warning:
 variable 'ht_cap_len' set but not used [-Wunused-but-set-variable]

They are never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a blank line after declarations.
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

  - The Xilinx AXI-Stream FIFO IP core driver description is elaborated.
  - References: Xilinx PG080 document, axis-fifo.txt
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typedef in struct sdio_data and make the respective changes in
associated files, as the struct that has elements that can reasonably
be directly accessed should never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the checkpath error:
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Daniel Junho <djunho@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a coding style issue.
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtl8192e/rtl8192e/rtl_pci.c: In function 'rtl92e_check_adapter':
drivers/staging/rtl8192e/rtl8192e/rtl_pci.c:36:6: warning:
 variable 'VenderID' set but not used [-Wunused-but-set-variable]
  u16 VenderID;
      ^

It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtlwifi/rtl8822be/hw.c: In function 'rtl8822be_update_hal_rate_mask':
drivers/staging/rtlwifi/rtl8822be/hw.c:2144:5: warning:
 variable 'curtxbw_40mhz' set but not used [-Wunused-but-set-variable]

It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add space between "enum TXDESC_SC" and '{' at line 86.

Fix the following error from checkpatch.pl

WARNING: missing space after enum definition
+enum TXDESC_SC{
Signed-off-by: William Tustumi <whatust@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch coding style errors on rtl819x_TSProc.c
- space required before the open parenthesis '('
- spaces required around that '=='
Signed-off-by: Caio Salvador Rohwedder <caiosalvador96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch error: "ERROR: space required after that close brace '}'".
Signed-off-by: Gabriel Siqueira <gabriel.gabrielhs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch error "ERROR: code indent should use tabs where possible"
in hal_com_phycfg.c:1726.
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function sta2sta_data_frame() is only used in rtw_recv.c.
So make it static.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The declaration of sta2sta_data_frame() is directly above
the function definition. Remove the unnecessary declaration.

This also clears a checkpatch issue.
CHECK: Lines should not end with a '('
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

List wlan_network is built properly with init_list_head and
list_add_tail which cancels out its probability of being NULL because of
the precence of list_head at the top of this structure. Hence, the NULL
test can be omitted.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `np->permission' structure is smaller than the `np' structure but
sizeof(*np) worth of data is copied in there. Fix the size passed to
copy_from_user() to avoid overrun.

Fixes: 3d2ec9dc ("staging: Android: Add 'vsoc' driver for cuttlefish.")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch updates the driver documentation files to reflect the
latest changes regarding configfs.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
v2:
	- changed kernel version to 5.2
v3:
v4:
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds code that cleans up established links whenever the destroy
attribute is set or if the config_item (directory) is being removed.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reading the create attribute that triggers the creation of a link to
a certain channel is not necessary. Hence, it is being removed.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>