Florian Westphal says:

====================
rtnetlink: fix initial rtnl pushdown fallout

This series fixes various bugs and splats reported since the
allow-handler-to-run-with-no-rtnl series went in.

Last patch adds a script that can be used to add further
tests in case more bugs are reported.
In case you prefer reverting the original series instead of
fixing fallout I can resend this patch on its own.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

add a simple script to exercise some rtnetlink call paths, so KASAN,
lockdep etc. can yell at developer before patches are sent upstream.

This can be extended to also cover bond, team, vrf and the like.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to use PF_UNSPEC in case the requested family has no doit
callback, otherwise this now fails with EOPNOTSUPP instead of running the
unspec doit callback, as before.

Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

If using CONFIG_REFCOUNT_FULL=y we get following splat:
 refcount_t: increment on 0; use-after-free.
WARNING: CPU: 0 PID: 304 at lib/refcount.c:152 refcount_inc+0x47/0x50
Call Trace:
 rtnetlink_rcv_msg+0x191/0x260
 ...

This warning is harmless (0 is "no callback running", not "memory
was freed").

Use '1' as the new 'no handler is running' base instead of 0 to avoid
this.

Fixes: 019a3169 ("rtnetlink: add reference counting to prevent module unload while dump is in progress")
Reported-by: Sabrina Dubroca <sdubroca@redhat.com>
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern reports following splat:
 RTNL: assertion failed at net/core/dev.c (5717)
 netdev_master_upper_dev_get+0x5f/0x70
 if_nlmsg_size+0x158/0x240
 rtnl_calcit.isra.26+0xa3/0xf0

rtnl_link_get_slave_info_data_size currently assumes RTNL protection, but
there appears to be no hard requirement for this, so use rcu instead.

At the time of this writing, there are three 'get_slave_size' callbacks
(now invoked under rcu): bond_get_slave_size, vrf_get_slave_size and
br_port_get_slave_size, all return constant only (i.e. they don't sleep).

Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Userspace sends RTM_GETLINK type, but the kernel substracts
RTM_BASE from this, i.e. 'type' doesn't contain RTM_GETLINK
anymore but instead RTM_GETLINK - RTM_BASE.

This caused the calcit callback to not be invoked when it
should have been (and vice versa).

While at it, also fix a off-by one when checking family index. vs
handler array size.

Fixes: e1fa6d21 ("rtnetlink: call rtnl_calcit directly")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido reports a rcu splat in __rtnl_register.
The splat is correct; as rtnl_register doesn't grab any logs
and doesn't use rcu locks either.  It has always been like this.
handler families are not registered in parallel so there are no
races wrt. the kmalloc ordering.

The only reason to use rcu_dereference in the first place was to
avoid sparse from complaining about this.

Thus this switches to _raw() to not have rcu checks here.

The alternative is to add rtnl locking to register/unregister,
however, I don't see a compelling reason to do so as this has been
lockless for the past twenty years or so.

Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following error was introduced by
commit 43e66528 ("net-next: dsa: fix flow dissection")
due to a missing #if guard

net/core/flow_dissector.c: In function '__skb_flow_dissect':
net/core/flow_dissector.c:448:18: error: 'struct net_device' has no member named 'dsa_ptr'
ops = skb->dev->dsa_ptr->tag_ops;
                ^
make[3]: *** [net/core/flow_dissector.o] Error 1
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Crispin says:

====================
net-next: dsa: fix flow dissection

RPS and probably other kernel features are currently broken on some if not
all DSA devices. The root cause of this is that skb_hash will call the
flow_dissector. At this point the skb still contains the magic switch
header and the skb->protocol field is not set up to the correct 802.3
value yet. By the time the tag specific code is called, removing the header
and properly setting the protocol an invalid hash is already set. In the
case of the mt7530 this will result in all flows always having the same
hash.

Changes since RFC:
* use a callback instead of static values
* add cover letter
====================
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RPS and probably other kernel features are currently broken on some if not
all DSA devices. The root cause of this is that skb_hash will call the
flow_dissector. At this point the skb still contains the magic switch
header and the skb->protocol field is not set up to the correct 802.3
value yet. By the time the tag specific code is called, removing the header
and properly setting the protocol an invalid hash is already set. In the
case of the mt7530 this will result in all flows always having the same
hash.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MT7530 inserts the 4 magic header in between the 802.3 address and
protocol field. The patch implements the callback that can be called by
the flow dissector to figure out the real protocol and offset of the
network header. With this patch applied we can properly parse the packet
and thus make hashing function properly.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the flow dissector first sees packets coming in on a DSA devices the
802.3 header wont be located where the code expects it to be as the tag
is still present. Adding this new callback allows a DSA device to provide a
new function that the flow_dissector can use to get the correct protocol
and offset of the network header.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to access this struct from within the flow_dissector to fix
dissection for packets coming in on DSA devices.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Crispin says:

====================
net-next: mediatek: bring up QDMA RX ring 0

The MT7623 has several DMA rings. Inside the SW path, the core will use
the PDMA when receiving traffic. While bringing up the HW path we noticed
that the PPE requires the QDMA RX to also be brought up as it uses this
ring internally for its flow scheduling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is in preparation for adding HW flow and QoS offloading. For
those features to work, the driver needs to bring up the first QDMA RX
ring. This ring is used by the PPE offloading HW.
Signed-off-by: John Crisp in <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial patch fixing 2 typos.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these const as they are only stored in the ops field of a atm_dev
structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these structures const as they are either passed to the function
atm_dev_register having the corresponding argument as const or stored in
the ops field of a atm_dev structure, which is also const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these structures const as they are only stored in the ops field of
a dsa_switch structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Disable napi when interface is going down.
Delete napi when destroying the interface.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ndisc_notify is used to send unsolicited neighbor advertisements
(e.g., on a link up). Currently, the ndisc notifier is run before the
addrconf notifer which means NA's are not sent for link-local addresses
which are added by the addrconf notifier.

Fix by lowering the priority of the ndisc notifier. Setting the priority
to ADDRCONF_NOTIFY_PRIORITY - 5 means it runs after addrconf and before
the route notifier which is ADDRCONF_NOTIFY_PRIORITY - 10.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a248878d ("ibmvnic: Check for transport event on driver resume")
removed the loop to kick irqs on driver resume but didn't remove the now
unused loop variable 'i'.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To ease debugging of the ibmvnic driver add a series of netdev_dbg()
statements to track driver status, especially during initialization,
removal, and resetting of the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that any resources allocated during probe are released if the
probe of the driver fails.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
rtnetlink: allow selected handlers to run without rtnl

Changes since v1:
 In patch 6, don't make ipv6 route handlers lockless, they all have
 assumptions on rtnl being held.  Other patches are unchanged.

The RTNL mutex is used to serialize both rtnetlink calls and
dump requests.
Its also used to protect other things such as the list of current
net namespaces.

Unfortunately RTNL mutex is a performance issue, e.g. a cpu adding an
ip address prevents other cpus from seemingly unrelated tasks such as
dumping tc classifiers or doing rtnetlink route lookups.

This patch set adds basic infrastructure to start pushing the rtnl lock
down to those places that need it, or even elide it entirely in some cases.

Subsystems can now indicate that their doit() callback can run without
RTNL mutex, such callbacks can then run in parallel.

This will obviously need a lot of followup work; all current
users need to be audited/changed to benefit from this.
Initial no-rtnl spot is netns new/getid.

We have various 'get' handlers that are also a tempting target,
however, several of these depend on rtnl mutex to prevent information
from changing while objects are being read by rtnl handlers; however,
it doesn't appear impossible to change this.

Dumps are another problem entirely, see
commit 2907c35f ("net: hold rtnl again in dump callbacks"),
this patchset doesn't touch dump requests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Both functions take nsid_lock and don't rely on rtnl lock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow callers to tell rtnetlink core that its doit callback
should be invoked without holding rtnl mutex.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Note that netlink dumps still acquire rtnl mutex via the netlink
dump infrastructure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

instead of rtnl lock/unload at the top level, push it down
to the called function.

This is just an intermediate step, next commit switches protection
of the rtnl_link ops table to rcu, in which case (for dumps) the
rtnl lock is acquired only by the netlink dumper infrastructure
(current lock/unlock/dump/lock/unlock rtnl sequence becomes
 rcu lock/rcu unlock/dump).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

I don't see what prevents rmmod (unregister_all is called) while a dump
is active.

Even if we'd add rtnl lock/unlock pair to unregister_all (as done here),
thats not enough either as rtnl_lock is released right before the dump
process starts.

So this adds a refcount:
 * acquire rtnl mutex
 * bump refcount
 * release mutex
 * start the dump

... and make unregister_all remove the callbacks (no new dumps possible)
and then wait until refcount is 0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change allows us to later indicate to rtnetlink core that certain
doit functions should be called without acquiring rtnl_mutex.

This change should have no effect, we simply replace the last (now
unused) calcit argument with the new flag.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is only a single place in the kernel that regisers the "calcit"
callback (to determine min allocation for dumps).

This is in rtnetlink.c for PF_UNSPEC RTM_GETLINK.
The function that checks for calcit presence at run time will first check
the requested family (which will always fail for !PF_UNSPEC as no callsite
registers this), then falls back to checking PF_UNSPEC.

Therefore we can just check if type is RTM_GETLINK and then do a direct
call.  Because of fallback to PF_UNSPEC all RTM_GETLINK types used this
regardless of family.

This has the advantage that we don't need to allocate space for
the function pointer for all the other families.

A followup patch will drop the calcit function pointer from the
rtnl_link callback structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
bpf: Add BPF_J{LT,LE,SLT,SLE} instructions

This set adds BPF_J{LT,LE,SLT,SLE} instructions to the BPF
insn set, interpreter, JIT hardening code and all JITs are
also updated to support the new instructions. Basic idea is
to reduce register pressure by avoiding BPF_J{GT,GE,SGT,SGE}
rewrites. Removing the workaround for the rewrites in LLVM,
this can result in shorter BPF programs, less stack usage
and less verification complexity. First patch provides some
more details on rationale and integration.

Thanks a lot!

v1 -> v2:
  - Reworded commit msg in patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test cases to the verifier selftest suite in order to verify that
i) direct packet access, and ii) dynamic map value access is working
with the changes related to the new instructions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable the newly added jump opcodes, main parts are in two
different areas, namely direct packet access and dynamic map
value access. For the direct packet access, we now allow for
the following two new patterns to match in order to trigger
markings with find_good_pkt_pointers():

Variant 1 (access ok when taking the branch):

  0: (61) r2 = *(u32 *)(r1 +76)
  1: (61) r3 = *(u32 *)(r1 +80)
  2: (bf) r0 = r2
  3: (07) r0 += 8
  4: (ad) if r0 < r3 goto pc+2
  R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
  R3=pkt_end R10=fp
  5: (b7) r0 = 0
  6: (95) exit

  from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx
               R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp
  7: (71) r0 = *(u8 *)(r2 +0)
  8: (05) goto pc-4
  5: (b7) r0 = 0
  6: (95) exit
  processed 11 insns, stack depth 0

Variant 2 (access ok on fall-through):

  0: (61) r2 = *(u32 *)(r1 +76)
  1: (61) r3 = *(u32 *)(r1 +80)
  2: (bf) r0 = r2
  3: (07) r0 += 8
  4: (bd) if r3 <= r0 goto pc+1
  R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8)
  R3=pkt_end R10=fp
  5: (71) r0 = *(u8 *)(r2 +0)
  6: (b7) r0 = 1
  7: (95) exit

  from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx
               R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp
  6: (b7) r0 = 1
  7: (95) exit
  processed 10 insns, stack depth 0

The above two basically just swap the branches where we need
to handle an exception and allow packet access compared to the
two already existing variants for find_good_pkt_pointers().

For the dynamic map value access, we add the new instructions
to reg_set_min_max() and reg_set_min_max_inv() in order to
learn bounds. Verifier test cases for both are added in a
follow-up patch.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work implements jiting of BPF_J{LT,LE} instructions with
BPF_X/BPF_K variants for the nfp eBPF JIT. The two BPF_J{SLT,SLE}
instructions have not been added yet given BPF_J{SGT,SGE} are
not supported yet either.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions
with BPF_X/BPF_K variants for the ppc64 eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions
with BPF_X/BPF_K variants for the s390x eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions
with BPF_X/BPF_K variants for the sparc64 eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions
with BPF_X/BPF_K variants for the arm64 eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>