- 07 Jun, 2024 1 commit
-
-
https://gitlab.freedesktop.org/drm/kernelLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Weekly fixes: vmwgfx leads the way this week, with minor changes in xe and amdgpu and a couple of other small fixes. Seems quiet enough. xe: - Update the LMTT when freeing VF GT config amdgpu: - Fix shutdown issues on some SMU 13.x platforms - Silence some UBSAN flexible array warnings panel: - sitronix-st7789v: handle of_drm_get_panel_orientation failing error vmwgfx: - filter modes greater than available graphics memory - fix 3D vs STDU enable - remove STDU logic from mode valid - logging fix - memcmp pointers fix - remove unused struct - screen target lifetime fix komeda: - unused struct removal" * tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel: drm/vmwgfx: Don't memcmp equivalent pointers drm/vmwgfx: remove unused struct 'vmw_stdu_dma' drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive drm/vmwgfx: Standardize use of kibibytes when logging drm/vmwgfx: Remove STDU logic from generic mode_valid function drm/vmwgfx: 3D disabled should not effect STDU memory limits drm/vmwgfx: Filter modes which exceed graphics memory drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms drm/xe/pf: Update the LMTT when freeing VF GT config drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation drm/komeda: remove unused struct 'gamma_curve_segment'
-
- 06 Jun, 2024 39 commits
-
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-next-fixes for v6.10-rc3: - Single unused struct removal that should have been in -fixes. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0251b6ae-bffa-44b2-b698-955712c25a27@linux.intel.com
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.10-rc3: - Robustness fixes for vmwgfx. - Error check for of_drm_get_panel_orientation failing in sitronix-st7789v. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.10-2024-06-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.10-2024-06-06: amdgpu: - Fix shutdown issues on some SMU 13.x platforms - Silence some UBSAN flexible array warnings Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "The core change is to detect unusually large number of VPD pages (caused by device manufacturers having an endiannes issue) and reject them rather than trying to parse a huge non-existent array. The remaining fixes are in drivers the most user visible of which is the ALUA state transition recognition (leads to intermittent I/O errors in some situations otherwise)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort() scsi: core: Handle devices which return an unusually large VPD page count scsi: mpt3sas: Add missing kerneldoc parameter descriptions scsi: qedf: Set qed_slowpath_params to zero before use scsi: qedf: Wait for stag work during unload scsi: qedf: Don't process stag work during unload and recovery scsi: sr: Fix unintentional arithmetic wraparound scsi: core: alua: I/O errors for ALUA state transitions scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
-
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pciLinus Torvalds authored
Pull pci fix from Bjorn Helgaas: - Revert lockdep checking on locking that protects device resets from user-space config accesses; it exposed issues for which fixes are in the works but are too risky for this cycle (Dan Williams) * tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Revert the cfg_access_lock lockdep mechanism
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from BPF and big collection of fixes for WiFi core and drivers. Current release - regressions: - vxlan: fix regression when dropping packets due to invalid src addresses - bpf: fix a potential use-after-free in bpf_link_free() - xdp: revert support for redirect to any xsk socket bound to the same UMEM as it can result in a corruption - virtio_net: - add missing lock protection when reading return code from control_buf - fix false-positive lockdep splat in DIM - Revert "wifi: wilc1000: convert list management to RCU" - wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config Previous releases - regressions: - rtnetlink: make the "split" NLM_DONE handling generic, restore the old behavior for two cases where we started coalescing those messages with normal messages, breaking sloppily-coded userspace - wifi: - cfg80211: validate HE operation element parsing - cfg80211: fix 6 GHz scan request building - mt76: mt7615: add missing chanctx ops - ath11k: move power type check to ASSOC stage, fix connecting to 6 GHz AP - ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs - rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS - iwlwifi: mvm: fix a crash on 7265 Previous releases - always broken: - ncsi: prevent multi-threaded channel probing, a spec violation - vmxnet3: disable rx data ring on dma allocation failure - ethtool: init tsinfo stats if requested, prevent unintentionally reporting all-zero stats on devices which don't implement any - dst_cache: fix possible races in less common IPv6 features - tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED - ax25: fix two refcounting bugs - eth: ionic: fix kernel panic in XDP_TX action Misc: - tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB" * tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) selftests: net: lib: set 'i' as local selftests: net: lib: avoid error removing empty netns name selftests: net: lib: support errexit with busywait net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() ipv6: fix possible race in __fib6_drop_pcpu_from() af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill(). af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen(). af_unix: Use skb_queue_empty_lockless() in unix_release_sock(). af_unix: Use unix_recvq_full_lockless() in unix_stream_connect(). af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen. af_unix: Annotate data-races around sk->sk_sndbuf. af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG. af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb(). af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg(). af_unix: Annotate data-race of sk->sk_state in unix_accept(). af_unix: Annotate data-race of sk->sk_state in unix_stream_connect(). af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll(). af_unix: Annotate data-race of sk->sk_state in unix_inq_len(). af_unix: Annodate data-races around sk->sk_state for writers. af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer. ... -
git://git.code.sf.net/p/tomoyo/tomoyoLinus Torvalds authored
Pull tomoyo fixlet from Tetsuo Handa: "Single patch to update project links, no behavior changes" * tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo: tomoyo: update project links
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Ensure that .discard sections are really discarded in the EFI zboot image build - Return proper error numbers from efi-pstore - Add __nocfi annotations to EFI runtime wrappers * tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Add missing __nocfi annotations to runtime wrappers efi: pstore: Return proper errors on UEFI failures efi/libstub: zboot.lds: Discard .discard sections
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: net: lib: small fixes While looking at using 'lib.sh' for the MPTCP selftests [1], we found some small issues with 'lib.sh'. Here they are: - Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is supported in some functions, not all. A fix for v6.8+. - Patch 2: avoid confusing error messages linked to the cleaning part when the netns setup fails. A fix for v6.8+. - Patch 3: set a variable as local to avoid accidentally changing the value of a another one with the same name on the caller side. A fix for v6.10-rc1+. Link: https://lore.kernel.org/mptcp/5f4615c3-0621-43c5-ad25-55747a4350ce@kernel.org/T/ [1] ==================== Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-0-b3afadd368c9@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts (NGI0) authored
Without this, the 'i' variable declared before could be overridden by accident, e.g. for i in "${@}"; do __ksft_status_merge "${i}" ## 'i' has been modified foo "${i}" ## using 'i' with an unexpected value done After a quick look, it looks like 'i' is currently not used after having been modified in __ksft_status_merge(), but still, better be safe than sorry. I saw this while modifying the same file, not because I suspected an issue somewhere. Fixes: 596c8819 ("selftests: forwarding: Have RET track kselftest framework constants") Acked-by:Geliang Tang <geliang@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
If there is an error to create the first netns with 'setup_ns()', 'cleanup_ns()' will be called with an empty string as first parameter. The consequences is that 'cleanup_ns()' will try to delete an invalid netns, and wait 20 seconds if the netns list is empty. Instead of just checking if the name is not empty, convert the string separated by spaces to an array. Manipulating the array is cleaner, and calling 'cleanup_ns()' with an empty array will be a no-op. Fixes: 25ae948b ("selftests/net: add lib.sh") Cc: stable@vger.kernel.org Acked-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
If errexit is enabled ('set -e'), loopy_wait -- or busywait and others using it -- will stop after the first failure. Note that if the returned status of loopy_wait is checked, and even if errexit is enabled, Bash will not stop at the first error. Fixes: 25ae948b ("selftests/net: add lib.sh") Cc: stable@vger.kernel.org Acked-by: -
Su Hui authored
Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error. Fixes: 201ed315 ("net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers") Signed-off-by:
Su Hui <suhui@nfschina.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240605034742.921751-1-suhui@nfschina.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
syzbot found a race in __fib6_drop_pcpu_from() [1] If compiler reads more than once (*ppcpu_rt), second read could read NULL, if another cpu clears the value in rt6_get_pcpu_route(). Add a READ_ONCE() to prevent this race. Also add rcu_read_lock()/rcu_read_unlock() because we rely on RCU protection while dereferencing pcpu_rt. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd58 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: netns cleanup_net RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984 Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48 RSP: 0018:ffffc900040df070 EFLAGS: 00010206 RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16 RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091 RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8 R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline] fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038 fib6_del_route net/ipv6/ip6_fib.c:1998 [inline] fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043 fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205 fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175 fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255 __fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271 rt6_sync_down_dev net/ipv6/route.c:4906 [inline] rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911 addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855 addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778 notifier_call_chain+0xb9/0x410 kernel/notifier.c:93 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992 call_netdevice_notifiers_extack net/core/dev.c:2030 [inline] call_netdevice_notifiers net/core/dev.c:2044 [inline] dev_close_many+0x333/0x6a0 net/core/dev.c:1585 unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193 unregister_netdevice_many net/core/dev.c:11276 [inline] default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20240604193549.981839-1-edumazet@google.comSigned-off-by:
-
Paolo Abeni authored
Kuniyuki Iwashima says: ==================== af_unix: Fix lockless access of sk->sk_state and others fields. The patch 1 fixes a bug where SOCK_DGRAM's sk->sk_state is changed to TCP_CLOSE even if the socket is connect()ed to another socket. The rest of this series annotates lockless accesses to the following fields. * sk->sk_state * sk->sk_sndbuf * net->unx.sysctl_max_dgram_qlen * sk->sk_receive_queue.qlen * sk->sk_shutdown Note that with this series there is skb_queue_empty() left in unix_dgram_disconnected() that needs to be changed to lockless version, and unix_peer(other) access there should be protected by unix_state_lock(). This will require some refactoring, so another series will follow. Changes: v2: * Patch 1: Fix wrong double lock v1: https://lore.kernel.org/netdev/20240603143231.62085-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240604165241.44758-1-kuniyu@amazon.comSigned-off-by: -
Kuniyuki Iwashima authored
While dumping sockets via UNIX_DIAG, we do not hold unix_state_lock(). Let's use READ_ONCE() to read sk->sk_shutdown. Fixes: e4e541a8 ("sock-diag: Report shutdown for inet and unix sockets (v2)") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
We can dump the socket queue length via UNIX_DIAG by specifying UDIAG_SHOW_RQLEN. If sk->sk_state is TCP_LISTEN, we return the recv queue length, but here we do not hold recvq lock. Let's use skb_queue_len_lockless() in sk_diag_show_rqlen(). Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report") Signed-off-by:
-
Kuniyuki Iwashima authored
If the socket type is SOCK_STREAM or SOCK_SEQPACKET, unix_release_sock() checks the length of the peer socket's recvq under unix_state_lock(). However, unix_stream_read_generic() calls skb_unlink() after releasing the lock. Also, for SOCK_SEQPACKET, __skb_try_recv_datagram() unlinks skb without unix_state_lock(). Thues, unix_state_lock() does not protect qlen. Let's use skb_queue_empty_lockless() in unix_release_sock(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
Once sk->sk_state is changed to TCP_LISTEN, it never changes. unix_accept() takes advantage of this characteristics; it does not hold the listener's unix_state_lock() and only acquires recvq lock to pop one skb. It means unix_state_lock() does not prevent the queue length from changing in unix_stream_connect(). Thus, we need to use unix_recvq_full_lockless() to avoid data-race. Now we remove unix_recvq_full() as no one uses it. Note that we can remove READ_ONCE() for sk->sk_max_ack_backlog in unix_recvq_full_lockless() because of the following reasons: (1) For SOCK_DGRAM, it is a written-once field in unix_create1() (2) For SOCK_STREAM and SOCK_SEQPACKET, it is changed under the listener's unix_state_lock() in unix_listen(), and we hold the lock in unix_stream_connect() Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: -
Kuniyuki Iwashima authored
net->unx.sysctl_max_dgram_qlen is exposed as a sysctl knob and can be changed concurrently. Let's use READ_ONCE() in unix_create1(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
sk_setsockopt() changes sk->sk_sndbuf under lock_sock(), but it's not used in af_unix.c. Let's use READ_ONCE() to read sk->sk_sndbuf in unix_writable(), unix_dgram_sendmsg(), and unix_stream_sendmsg(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While dumping AF_UNIX sockets via UNIX_DIAG, sk->sk_state is read locklessly. Let's use READ_ONCE() there. Note that the result could be inconsistent if the socket is dumped during the state change. This is common for other SOCK_DIAG and similar interfaces. Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report") Fixes: 2aac7a2c ("unix_diag: Pending connections IDs NLA") Fixes: 45a96b9b ("unix_diag: Dumping all sockets core") Signed-off-by:
-
Kuniyuki Iwashima authored
unix_stream_read_skb() is called from sk->sk_data_ready() context where unix_state_lock() is not held. Let's use READ_ONCE() there. Fixes: 77462de1 ("af_unix: Add read_sock for stream socket types") Signed-off-by:
-
Kuniyuki Iwashima authored
The following functions read sk->sk_state locklessly and proceed only if the state is TCP_ESTABLISHED. * unix_stream_sendmsg * unix_stream_read_generic * unix_seqpacket_sendmsg * unix_seqpacket_recvmsg Let's use READ_ONCE() there. Fixes: a05d2ad1 ("af_unix: Only allow recv on connected seqpacket sockets.") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
Once sk->sk_state is changed to TCP_LISTEN, it never changes. unix_accept() takes the advantage and reads sk->sk_state without holding unix_state_lock(). Let's use READ_ONCE() there. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
As small optimisation, unix_stream_connect() prefetches the client's sk->sk_state without unix_state_lock() and checks if it's TCP_CLOSE. Later, sk->sk_state is checked again under unix_state_lock(). Let's use READ_ONCE() for the first check and TCP_CLOSE directly for the second check. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
unix_poll() and unix_dgram_poll() read sk->sk_state locklessly and calls unix_writable() which also reads sk->sk_state without holding unix_state_lock(). Let's use READ_ONCE() in unix_poll() and unix_dgram_poll() and pass it to unix_writable(). While at it, we remove TCP_SYN_SENT check in unix_dgram_poll() as that state does not exist for AF_UNIX socket since the code was added. Fixes: 1586a587 ("af_unix: do not report POLLOUT on listeners") Fixes: 3c73419c ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
ioctl(SIOCINQ) calls unix_inq_len() that checks sk->sk_state first and returns -EINVAL if it's TCP_LISTEN. Then, for SOCK_STREAM sockets, unix_inq_len() returns the number of bytes in recvq. However, unix_inq_len() does not hold unix_state_lock(), and the concurrent listen() might change the state after checking sk->sk_state. If the race occurs, 0 is returned for the listener, instead of -EINVAL, because the length of skb with embryo is 0. We could hold unix_state_lock() in unix_inq_len(), but it's overkill given the result is true for pre-listen() TCP_CLOSE state. So, let's use READ_ONCE() for sk->sk_state in unix_inq_len(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
sk->sk_state is changed under unix_state_lock(), but it's read locklessly in many places. This patch adds WRITE_ONCE() on the writer side. We will add READ_ONCE() to the lockless readers in the following patches. Fixes: 83301b53 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
When a SOCK_DGRAM socket connect()s to another socket, the both sockets' sk->sk_state are changed to TCP_ESTABLISHED so that we can register them to BPF SOCKMAP. When the socket disconnects from the peer by connect(AF_UNSPEC), the state is set back to TCP_CLOSE. Then, the peer's state is also set to TCP_CLOSE, but the update is done locklessly and unconditionally. Let's say socket A connect()ed to B, B connect()ed to C, and A disconnects from B. After the first two connect()s, all three sockets' sk->sk_state are TCP_ESTABLISHED: $ ss -xa Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess u_dgr ESTAB 0 0 @A 641 * 642 u_dgr ESTAB 0 0 @B 642 * 643 u_dgr ESTAB 0 0 @C 643 * 0 And after the disconnect, B's state is TCP_CLOSE even though it's still connected to C and C's state is TCP_ESTABLISHED. $ ss -xa Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess u_dgr UNCONN 0 0 @A 641 * 0 u_dgr UNCONN 0 0 @B 642 * 643 u_dgr ESTAB 0 0 @C 643 * 0 In this case, we cannot register B to SOCKMAP. So, when a socket disconnects from the peer, we should not set TCP_CLOSE to the peer if the peer is connected to yet another socket, and this must be done under unix_state_lock(). Note that we use WRITE_ONCE() for sk->sk_state as there are many lockless readers. These data-races will be fixed in the following patches. Fixes: 83301b53 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too") Signed-off-by:
-
Aleksandr Mishin authored
In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4dcd183f ("net: wwan: iosm: devlink registration") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Acked-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ruSigned-off-by:
-
Ian Forbes authored
These pointers are frequently the same and memcmp does not compare the pointers before comparing their contents so this was wasting cycles comparing 16 KiB of memory which will always be equal. Fixes: bb6780aa ("drm/vmwgfx: Diff cursors when using cmds") Signed-off-by:
Ian Forbes <ian.forbes@broadcom.com> Signed-off-by:
Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328190716.27367-1-ian.forbes@broadcom.com
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-05-29 (ice, igc) This series includes fixes for the ice driver as well as a fix for the igc driver. Jacob fixes two issues in the ice driver with reading the NVM for providing firmware data via devlink info. First, fix an off-by-one error when reading the Preserved Fields Area, resolving an infinite loop triggered on some NVMs which lack certain data in the NVM. Second, fix the reading of the NVM Shadow RAM on newer E830 and E825-C devices which have a variable sized CSS header rather than assuming this header is always the same fixed size as in the E810 devices. Larysa fixes three issues with the ice driver XDP logic that could occur if the number of queues is changed after enabling an XDP program. First, the af_xdp_zc_qps bitmap is removed and replaced by simpler logic to track whether queues are in zero-copy mode. Second, the reset and .ndo_bpf flows are distinguished to avoid potential races with a PF reset occuring simultaneously to .ndo_bpf callback from userspace. Third, the logic for mapping XDP queues to vectors is fixed so that XDP state is restored for XDP queues after a reconfiguration. Sasha fixes reporting of Energy Efficient Ethernet support via ethtool in the igc driver. v1: https://lore.kernel.org/r/20240530-net-2024-05-30-intel-net-fixes-v1-0-8b11c8c9bff8@intel.com ==================== Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-0-e3563aa89b0c@intel.comSigned-off-by:
-
Sasha Neftin authored
The commit 01cf893b ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate ethtool_keee structure initialization. When "ethtool --show <device>" (get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden. Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE specification that allows reporting Energy Efficient Ethernet capabilities. Examples: Before fix: ethtool --show-eee enp174s0 EEE settings for enp174s0: EEE status: not supported After fix: EEE settings for enp174s0: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Fixes: 01cf893b ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") Suggested-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.comSigned-off-by:
-
Larysa Zaremba authored
ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by:
Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by:
-
Larysa Zaremba authored
Commit 6624e780 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b ("ice: Add support for XDP") Reviewed-by:
Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by:
-
Larysa Zaremba authored
Referenced commit has introduced a bitmap to distinguish between ZC and copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this for us. The bitmap would be especially useful when restoring previous state after rebuild, if only it was not reallocated in the process. This leads to e.g. xdpsock dying after changing number of queues. Instead of preserving the bitmap during the rebuild, remove it completely and distinguish between ZC and copy-mode queues based on the presence of a device associated with the pool. Fixes: e102db78 ("ice: track AF_XDP ZC enabled queues in bitmap") Reviewed-by:
-
Jacob Keller authored
The ice driver reads data from the Shadow RAM portion of the NVM during initialization, including data used to identify the NVM image and device, such as the ETRACK ID used to populate devlink dev info fw.bundle. Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to compute the appropriate offset. This worked fine for E810 and E822 devices which both have CSS header length of 330 words. Other devices, including both E825-C and E830 devices have different sizes for their CSS header. The use of a hard coded value results in the driver reading from the wrong block in the NVM when attempting to access the Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0 in both the devlink dev info and ethtool -i output. The first E830 support was introduced by commit ba20ecb1 ("ice: Hook up 4 E830 devices by adding their IDs") and the first E825-C support was introducted by commit f64e1894 ("ice: introduce new E825C devices family") The NVM actually contains the CSS header length embedded in it. Remove the hard coded value and replace it with logic to read the length from the NVM directly. This is more resilient against all existing and future hardware, vs looking up the expected values from a table. It ensures the driver will read from the appropriate place when determining the ETRACK ID value used for populating the fw.bundle_id and for reporting in ethtool -i. The CSS header length for both the active and inactive flash bank is stored in the ice_bank_info structure to avoid unnecessary duplicate work when accessing multiple words of the Shadow RAM. Both banks are read in the unlikely event that the header length is different for the NVM in the inactive bank, rather than being different only by the overall device family. Fixes: ba20ecb1 ("ice: Hook up 4 E830 devices by adding their IDs") Co-developed-by:
Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by:
-
Jacob Keller authored
The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value structures in the Preserved Fields Area (PFA) of the NVM. This is used by the driver to access data such as the Part Board Assembly identifier. The function uses simple logic to iterate over the PFA. First, the pointer to the PFA in the NVM is read. Then the total length of the PFA is read from the first word. A pointer to the first TLV is initialized, and a simple loop iterates over each TLV. The pointer is moved forward through the NVM until it exceeds the PFA area. The logic seems sound, but it is missing a key detail. The Preserved Fields Area length includes one additional final word. This is documented in the device data sheet as a dummy word which contains 0xFFFF. All NVMs have this extra word. If the driver tries to scan for a TLV that is not in the PFA, it will read past the size of the PFA. It reads and interprets the last dummy word of the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA as a length. The PFA resides within the Shadow RAM portion of the NVM, which is relatively small. All of its offsets are within a 16-bit size. The PFA pointer and TLV pointer are stored by the driver as 16-bit values. In almost all cases, the word following the PFA will be such that interpreting it as a length will result in 16-bit arithmetic overflow. Once overflowed, the new next_tlv value is now below the maximum offset of the PFA. Thus, the driver will continue to iterate the data as TLVs. In the worst case, the driver hits on a sequence of reads which loop back to reading the same offsets in an endless loop. To fix this, we need to correct the loop iteration check to account for this extra word at the end of the PFA. This alone is sufficient to resolve the known cases of this issue in the field. However, it is plausible that an NVM could be misconfigured or have corrupt data which results in the same kind of overflow. Protect against this by using check_add_overflow when calculating both the maximum offset of the TLVs, and when calculating the next_tlv offset at the end of each loop iteration. This ensures that the driver will not get stuck in an infinite loop when scanning the PFA. Fixes: e961b679 ("ice: add board identifier info to devlink .info_get") Co-developed-by:
-
