Pull io_uring fixes from Jens Axboe:
 "A followup fix for the parisc/SHM_COLOUR fix, also from Helge, which
  is heading to stable.

  And then just the io_uring equivalent of the RESOLVE_CACHED fix in
  commit a0fc452a from last week for build_open_flags()"

* tag 'io_uring-6.5-2023-08-11' of git://git.kernel.dk/linux:
  io_uring/parisc: Adjust pgoff in io_uring mmap() for parisc
  io_uring: correct check for O_TMPFILE

Pull pci fixes from Bjorn Helgaas:

 - Add Manivannan Sadhasivam as DesignWare PCIe driver co-maintainer
   (Krzysztof Wilczyński)

 - Revert "PCI: dwc: Wait for link up only if link is started" to fix a
   regression on Qualcomm platforms that don't reach interconnect sync
   state if the slot is empty (Johan Hovold)

 - Revert "PCI: mvebu: Mark driver as BROKEN" so people can use
   pci-mvebu even though some others report problems (Bjorn Helgaas)

 - Avoid a NULL pointer dereference when using acpiphp for root bus
   hotplug to fix a regression added in v6.5-rc1 (Igor Mammedov)

* tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus
  Revert "PCI: mvebu: Mark driver as BROKEN"
  Revert "PCI: dwc: Wait for link up only if link is started"
  MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer

Pull RISC-V fixes from Palmer Dabbelt:

 - Fixes for a pair of kexec_file_load() failures

 - A fix to ensure the direct mapping is PMD-aligned

 - A fix for CPU feature detection on SMP=n

 - The MMIO ordering fences have been strengthened to ensure ordering
   WRT delay()

 - Fixes for a pair of -Wmissing-variable-declarations warnings

 - A fix to avoid PUD mappings in vmap on sv39

 - flush_cache_vmap() now flushes the TLB to avoid issues on systems
   that cache invalid mappings

* tag 'riscv-for-linus-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Implement flush_cache_vmap()
  riscv: Do not allow vmap pud mappings for 3-level page table
  riscv: mm: fix 2 instances of -Wmissing-variable-declarations
  riscv,mmio: Fix readX()-to-delay() ordering
  riscv: Fix CPU feature detection with SMP disabled
  riscv: Start of DRAM should at least be aligned on PMD size for the direct mapping
  riscv/kexec: load initrd high in available memory
  riscv/kexec: handle R_RISCV_CALL_PLT relocation type

Pull parisc architecture fixes from Helge Deller:
 "A bugfix in the LWS code, which used different lock words than the
  parisc lightweight spinlock checks. This inconsistency triggered false
  positives when the lightweight spinlock checks checked the locks of
  mutexes.

  The other patches are trivial cleanups and most of them fix sparse
  warnings.

  Summary:

   - Fix LWS code to use same lock words as for the parisc lightweight
     spinlocks

   - Use PTR_ERR_OR_ZERO() in pdt init code

   - Fix lots of sparse warnings"

* tag 'parisc-for-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: perf: Make cpu_device variable static
  parisc: ftrace: Add declaration for ftrace_function_trampoline()
  parisc: boot: Nuke some sparse warnings in decompressor
  parisc: processor: Include asm/smp.h for init_per_cpu()
  parisc: unaligned: Include linux/sysctl.h for unaligned_enabled
  parisc: Move proc_mckinley_root and proc_runway_root to sba_iommu
  parisc: dma: Add prototype for pcxl_dma_start
  parisc: parisc_ksyms: Include libgcc.h for libgcc prototypes
  parisc: ucmpdi2: Fix no previous prototype for '__ucmpdi2' warning
  parisc: firmware: Mark pdc_result buffers local
  parisc: firmware: Fix sparse context imbalance warnings
  parisc: signal: Fix sparse incorrect type in assignment warning
  parisc: ioremap: Fix sparse warnings
  parisc: fault: Use C99 arrary initializers
  parisc: pdt: Use PTR_ERR_OR_ZERO() to simplify code
  parisc: Fix lightweight spinlock checks to not break futexes

Pull cpuidle psci fixes from Ulf Hansson:
 "A couple of cpuidle-psci fixes. Usually, this is managed by arm-soc
  maintainers or Rafael, although due to a busy period I have stepped in
  to help out:

   - Fix the error path to prevent reverting from OSI back to PC mode"

* tag 'cpuidle-psci-v6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  cpuidle: psci: Move enabling OSI mode after power domains creation
  cpuidle: dt_idle_genpd: Add helper function to remove genpd topology

Pull drm fixes from Dave Airlie:
 "This week's fixes, as expected amdgpu is probably a little larger
  since it skipped a week, but otherwise a few nouveau fixes, a couple
  of bridge, rockchip and ivpu fixes.

  amdgpu:
   - S/G display workaround for platforms with >= 64G of memory
   - S0i3 fix
   - SMU 13.0.0 fixes
   - Disable SMU 13.x OD features temporarily while the interface is
     reworked to enable additional functionality
   - Fix cursor gamma issues on DCN3+
   - SMU 13.0.6 fixes
   - Fix possible UAF in CS IOCTL
   - Polaris display regression fix
   - Only enable CP GFX shadowing on SR-IOV

  amdkfd:
   - Raven/Picasso KFD regression fix

  bridge:
   - it6505: runtime PM fix
   - lt9611: revert Do not generate HFP/HBP/HSA and EOT packet

  nouveau:
   - enable global memory loads for helper invocations for userspace
     driver
   - dp 1.3 dpcd+ workaround fix
   - remove unused function
   - revert incorrect NULL check

  accel/ivpu:
   - Add set_pages_array_wc/uc for internal buffers

  rockchip:
   - Don't spam logs in atomic check"

* tag 'drm-fixes-2023-08-11' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()
  drm/amdkfd: disable IOMMUv2 support for Raven
  drm/amdkfd: disable IOMMUv2 support for KV/CZ
  drm/amdkfd: ignore crat by default
  drm/amdgpu/gfx11: only enable CP GFX shadowing on SR-IOV
  drm/amd/display: Fix a regression on Polaris cards
  drm/amdgpu: fix possible UAF in amdgpu_cs_pass1()
  drm/amd/pm: Fix SMU v13.0.6 energy reporting
  drm/amd/display: check attr flag before set cursor degamma on DCN3+
  drm/amd/pm: disable the SMU13 OD feature support temporarily
  drm/amd/pm: correct the pcie width for smu 13.0.0
  drm/amd/display: Don't show stack trace for missing eDP
  drm/amdgpu: Match against exact bootloader status
  drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11
  drm/amd: Disable S/G for APUs when 64GB or more host memory
  drm/rockchip: Don't spam logs in atomic check
  accel/ivpu: Add set_pages_array_wc/uc for internal buffers
  drm/nouveau/disp: Revert a NULL check inside nouveau_connector_get_modes
  Revert "drm/bridge: lt9611: Do not generate HFP/HBP/HSA and EOT packet"
  drm/nouveau: remove unused tu102_gr_load() function
  ...

Merge tag 'amd-drm-fixes-6.5-2023-08-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-08-09:

amdgpu:
- S/G display workaround for platforms with >= 64G of memory
- S0i3 fix
- SMU 13.0.0 fixes
- Disable SMU 13.x OD features temporarily while the interface is reworked
  to enable additional functionality
- Fix cursor gamma issues on DCN3+
- SMU 13.0.6 fixes
- Fix possible UAF in CS IOCTL
- Polaris display regression fix
- Only enable CP GFX shadowing on SR-IOV

amdkfd:
- Raven/Picasso KFD regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809182827.8135-1-alexander.deucher@amd.com

Multiple fixes for nouveau around memory safety and DisplayPort, one fix
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fwed6gzdtkse5ocrgd37elhyw7qirfptsvfp5mqqverdzifhxj@4da3vesxcqp2

Signed-off-by: Helge Deller <deller@gmx.de>

Make sparse happy by adding declaration for
ftrace_function_trampoline().
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Fix sparse warning that init_per_cpu() isn't declared.
Signed-off-by: Helge Deller <deller@gmx.de>

Fix sparse warning that unaligned_enabled wasn't declared.
Signed-off-by: Helge Deller <deller@gmx.de>

Clean up the procfs root entries for gsc, runway, and mckinley busses.
Signed-off-by: Helge Deller <deller@gmx.de>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wireless and bpf.

  Still trending up in size but the good news is that the "current"
  regressions are resolved, AFAIK.

  We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
  handling on embedded this week (most not merged yet), not sure why.
  But those are all for older bugs.

  Current release - regressions:

   - tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
     over to TCP

  Current release - new code bugs:

   - eth: mlx5: correct IDs on VFs internal to the device (IPU)

  Previous releases - regressions:

   - phy: at803x: fix WoL support / reporting on AR8032

   - bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
     slaves, leading to BUG_ON()

   - tun: prevent tun_build_skb() from exceeding the packet size limit

   - wifi: rtw89: fix 8852AE disconnection caused by RX full flags

   - eth/PCI: enetc: fix probing after 6fffbc7a ("PCI: Honor
     firmware's device disabled status"), keep PCI devices around even
     if they are disabled / not going to be probed to be able to apply
     quirks on them

   - eth: prestera: fix handling IPv4 routes with nexthop IDs

  Previous releases - always broken:

   - netfilter: re-work garbage collection to avoid races between
     user-facing API and timeouts

   - tunnels: fix generating ipv4 PMTU error on non-linear skbs

   - nexthop: fix infinite nexthop bucket dump when using maximum
     nexthop ID

   - wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()

  Misc:

   - unix: use consistent error code in SO_PEERPIDFD

   - ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
     upcoming IETF RFC"

* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
  net: hns3: fix strscpy causing content truncation issue
  net: tls: set MSG_SPLICE_PAGES consistently
  ibmvnic: Ensure login failure recovery is safe from other resets
  ibmvnic: Do partial reset on login failure
  ibmvnic: Handle DMA unmapping of login buffs in release functions
  ibmvnic: Unmap DMA login rsp buffer on send login fail
  ibmvnic: Enforce stronger sanity checks on login response
  net: mana: Fix MANA VF unload when hardware is unresponsive
  netfilter: nf_tables: remove busy mark and gc batch API
  netfilter: nft_set_hash: mark set element as dead when deleting from packet path
  netfilter: nf_tables: adapt set backend to use GC transaction API
  netfilter: nf_tables: GC transaction API to avoid race with control plane
  selftests/bpf: Add sockmap test for redirecting partial skb data
  selftests/bpf: fix a CI failure caused by vsock sockmap test
  bpf, sockmap: Fix bug that strp_done cannot be called
  bpf, sockmap: Fix map type error in sock_map_del_link
  xsk: fix refcount underflow in error path
  ipv6: adjust ndisc_is_useropt() to also return true for PIO
  selftests: forwarding: bridge_mdb: Make test more robust
  selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
  ...

hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.

strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.

One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:

Expected:
UC MAC_LIST:
FUNC_ID  MAC_ADDR            STATE
pf       00:2b:19:05:03:00   ACTIVE

The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.

Fixes: 1cf3d556 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We used to change the flags for the last segment, because
non-last segments had the MSG_SENDPAGE_NOTLAST flag set.
That flag is no longer a thing so remove the setting.

Since flags most likely don't have MSG_SPLICE_PAGES set
this avoids passing parts of the sg as splice and parts
as non-splice. Before commit under Fixes we'd have called
tcp_sendpage() which would add the MSG_SPLICE_PAGES.

Why this leads to trouble remains unclear but Tariq
reports hitting the WARN_ON(!sendpage_ok()) due to
page refcount of 0.

Fixes: e117dcfd ("tls: Inline do_tcp_sendpages()")
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/Tested-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230808180917.1243540-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull dmaengine fixes from Vinod Koul:

 - HAS_IOMEM fixes for fsl edma and intel idma

 - return-value fix, interrupt vector setting and typo fix for xilinx
   xdma

 - email updates for codeaurora email domain move

 - correct pause status for pl330 driver

 - idxd clear flag on disable fix

 - function documentation fix for owl dma

 - potential un-allocated memory fix for mcf driver

* tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: xilinx: xdma: Fix typo
  dmaengine: xilinx: xdma: Fix interrupt vector setting
  dmaengine: owl-dma: Modify mismatched function name
  dmaengine: idxd: Clear PRS disable flag when disabling IDXD device
  dmaengine: pl330: Return DMA_PAUSED when transaction is paused
  dmaengine: qcom_hidma: Update codeaurora email domain
  dmaengine: mcf-edma: Fix a potential un-allocated memory access
  dmaengine: xilinx: xdma: Fix Judgment of the return value
  idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The existing attempt to resolve races between control plane and GC work
is error prone, as reported by Bien Pham <phamnnb@sea.com>, some places
forgot to call nft_set_elem_mark_busy(), leading to double-deactivation
of elements.

This series contains the following patches:

1) Do not skip expired elements during walk otherwise elements might
   never decrement the reference counter on data, leading to memleak.

2) Add a GC transaction API to replace the former attempt to deal with
   races between control plane and GC. GC worker sets on NFT_SET_ELEM_DEAD_BIT
   on elements and it creates a GC transaction to remove the expired
   elements, GC transaction could abort in case of interference with
   control plane and retried later (GC async). Set backends such as
   rbtree and pipapo also perform GC from control plane (GC sync), in
   such case, element deactivation and removal is safe because mutex
   is held then collected elements are released via call_rcu().

3) Adapt existing set backends to use the GC transaction API.

4) Update rhash set backend to set on _DEAD bit to report deleted
   elements from datapath for GC.

5) Remove old GC batch API and the NFT_SET_ELEM_BUSY_BIT.

* tag 'nf-23-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: remove busy mark and gc batch API
  netfilter: nft_set_hash: mark set element as dead when deleting from packet path
  netfilter: nf_tables: adapt set backend to use GC transaction API
  netfilter: nf_tables: GC transaction API to avoid race with control plane
  netfilter: nf_tables: don't skip expired elements during walk
====================

Link: https://lore.kernel.org/r/20230810070830.24064-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-09

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 6 files changed, 102 insertions(+), 8 deletions(-).

The main changes are:

1) A bpf sockmap memleak fix and a fix in accessing the programs of
   a sockmap under the incorrect map type from Xu Kuohai.

2) A refcount underflow fix in xsk from Magnus Karlsson.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add sockmap test for redirecting partial skb data
  selftests/bpf: fix a CI failure caused by vsock sockmap test
  bpf, sockmap: Fix bug that strp_done cannot be called
  bpf, sockmap: Fix map type error in sock_map_del_link
  xsk: fix refcount underflow in error path
====================

Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
 1. This will result in two parallel initialization processes, this can
 cause serious issues during login.
 2. It is possible that the failover CRQ is received but never executed.
 We get notified of a pending failover through a transport event CRQ.
 The reset is not performed until a INIT CRQ request is received.
 Previously, if CRQ init fails during login recovery, then the ibmvnic
 irq is freed and the login process returned error. If failover_pending
 is true (a transport event was received), then the ibmvnic device
 would never be able to process the reset since it cannot receive the
 CRQ_INIT request due to the irq being freed. This leaved the device
 in a inoperable state.

Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Perform a partial reset before sending a login request if any of the
following are true:
 1. If a previous request times out. This can be dangerous because the
 	VIOS could still receive the old login request at any point after
 	the timeout. Therefore, it is best to re-register the CRQ's  and
 	sub-CRQ's before retrying.
 2. If the previous request returns an error that is not described in
 	PAPR. PAPR provides procedures if the login returns with partial
 	success or aborted return codes (section L.5.1) but other values
	do not have a defined procedure. Previously, these conditions
	just returned error from the login function rather than trying
	to resolve the issue.
 	This can cause further issues since most callers of the login
 	function are not prepared to handle an error when logging in. This
 	improper cleanup can lead to the device being permanently DOWN'd.
 	For example, if the VIOS believes that the device is already logged
 	in then it will return INVALID_STATE (-7). If we never re-register
 	CRQ's then it will always think that the device is already logged
 	in. This leaves the device inoperable.

The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.

If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.

Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.

Fixes: c98d9cc4 ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.

When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.

Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.

Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.

Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

The RISC-V kernel needs a sfence.vma after a page table modification: we
used to rely on the vmalloc fault handling to emit an sfence.vma, but
commit 7d3332be ("riscv: mm: Pre-allocate PGD entries for
vmalloc/modules area") got rid of this path for 64-bit kernels, so now we
need to explicitly emit a sfence.vma in flush_cache_vmap().

Note that we don't need to implement flush_cache_vunmap() as the generic
code should emit a flush tlb after unmapping a vmalloc region.

Fixes: 7d3332be ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230725132246.817726-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The vmalloc_fault() path was removed and to avoid syncing the vmalloc PGD
mappings, they are now preallocated. But if the kernel can use a PUD
mapping (which in sv39 is actually a PGD mapping) for large vmalloc
allocation, it will free the current unused preallocated PGD mapping and
install a new leaf one. Since there is no sync anymore, some page tables
lack this new mapping and that triggers a panic.

So only allow PUD mappings for sv48 and sv57.

Fixes: 7d3332be ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230808130709.1502614-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This fixes a sparse warning which suggest to make those static.
Signed-off-by: Helge Deller <deller@gmx.de>

Tell sparse about correct context for pdc_cpu_rendezvous_*lock()
functions.
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Fix sparse warning:
	incorrect type in assignment (different base types)
	expected unsigned long [usertype] addr
	got void *addr
Signed-off-by: Helge Deller <deller@gmx.de>

Sparse wants C99 array initializers.
Signed-off-by: Helge Deller <deller@gmx.de>

Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to
simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The lightweight spinlock checks verify that a spinlock has either value
0 (spinlock locked) and that not any other bits than in
__ARCH_SPIN_LOCK_UNLOCKED_VAL is set.

This breaks the current LWS code, which writes the address of the lock
into the lock word to unlock it, which was an optimization to save one
assembler instruction.

Fix it by making spinlock_types.h accessible for asm code, change the
LWS spinlock-unlocking code to write __ARCH_SPIN_LOCK_UNLOCKED_VAL into
the lock word, and add some missing lightweight spinlock checks to the
LWS path. Finally, make the spinlock checks dependend on DEBUG_KERNEL.
Noticed-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v6.4+
Fixes: 15e64ef6 ("parisc: Add lightweight spinlock checks")

The dma-buf backend is supposed to provide its own vm_ops, but some
implementation just have nothing special to do and leave vm_ops
untouched, probably expecting this field to be zero initialized (this
is the case with the system_heap implementation for instance).
Let's reset vma->vm_ops to NULL to keep things working with these
implementations.

Fixes: 26d3ac3c ("drm/shmem-helpers: Redirect mmap for imported dma-buf")
Cc: <stable@vger.kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com

Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>