- 06 Oct, 2013 11 commits
-
-
Sachin Kamat authored
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 Sep, 2013 9 commits
-
-
Ping Cheng authored
Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ping Cheng authored
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ping Cheng authored
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jason Gerecke authored
The EMR sensor of Intuos4 and newer devices can send a packet with 0x20 in its second byte which contains only location information. This packet is sent when the pen is too far away to reliably obtain other information. Because only the location is updated userspace will continue to see stale information for other values, most notably TOUCH, PRESSURE, and DISTANCE. This patch ensures userspace is not left with stale device state information when the pen re-enters proximity (possibly leading to the assumption the pen is still in contact even though it is actually hovering). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jason Gerecke authored
Adds support for the sensors integrated in to the Cintiq Companion Hybrid. These sensors use by-and-large the same protocol as the Cintiq 24HD touch. NOTE: The ExpressKeys on the Cintiq Companion Hybrid are wired to both the EMR controller and CPU GPIO pins. It may be necessary to disable their functionality in this driver if building a custom Android kernel for this device (lest two events be sent to userspace for every button press). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 Sep, 2013 2 commits
-
-
K. Y. Srinivasan authored
Add a new driver to support synthetic keyboard. On the next generation Hyper-V guest firmware, many legacy devices will not be emulated and this driver will be required. I would like to thank Vojtech Pavlik <vojtech@suse.cz> for helping me with the details of the AT keyboard driver. I would also like to thank Dan Carpenter <dan.carpenter@oracle.com> and Dmitry Torokhov <dmitry.torokhov@gmail.com> for their detailed review of this driver. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ryan Mallon authored
Rework the code in uinput_inject_event so that it matches the code in evdev_write and allows injecting more than one event, or zero events. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Sep, 2013 6 commits
-
-
Sachin Kamat authored
Driver core sets the data to NULL upon release or probe failure. Hence explicit setting is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge with mainline to bring in sync changes to cyttsp4 driver.
-
Sachin Kamat authored
Driver core sets the data to NULL upon release or probe failure. Hence explicit setting is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
Driver core sets the data to NULL upon release or probe failure. Hence explicit setting is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
Driver core sets the data to NULL upon release or probe failure. Hence explicit setting is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 Sep, 2013 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "This is a bug fix for the pm80xx driver. It turns out that when the new hardware support was added in 3.10 the IO command size was kept at the old hard coded value. This means that the driver attaches to some new cards and then simply hangs the system" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] pm80xx: fix Adaptec 71605H hang
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot fix from Peter Anvin: "A single very small boot fix for very large memory systems (> 0.5T)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dma fix from Vinod Koul: "A fix for resolving TI_EDMA driver's build error in allmodconfig to have filter function built in"" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma/Kconfig: TI_EDMA needs to be boolean
-
- 31 Aug, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) There was a simplification in the ipv6 ndisc packet sending attempted here, which avoided using memory accounting on the per-netns ndisc socket for sending NDISC packets. It did fix some important issues, but it causes regressions so it gets reverted here too. Specifically, the problem with this change is that the IPV6 output path really depends upon there being a valid skb->sk attached. The reason we want to do this change in some form when we figure out how to do it right, is that if a device goes down the ndisc_sk socket send queue will fill up and block NDISC packets that we want to send to other devices too. That's really bad behavior. Hopefully Thomas can come up with a better version of this change. 2) Fix a severe TCP performance regression by reverting a change made to dev_pick_tx() quite some time ago. From Eric Dumazet. 3) TIPC returns wrongly signed error codes, fix from Erik Hugne. 4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the skb->sk too early. Fix from Li Hongjun. 5) RAW ipv4 sockets can use the wrong routing key during lookup, from Chris Clark. 6) Similar to #1 revert an older change that tried to use plain alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner mark which needs to see the skb->sk for such frames. From Phil Oester. 7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz, specifically in the handling of virtual functions. 8) IPSEC path error propagations to sockets is not done properly when we have v4 in v6, and v6 in v4 type rules. Fix from Hannes Frederic Sowa. 9) Fix missing channel context release in mac80211, from Johannes Berg. 10) Fix network namespace handing wrt. SCM_RIGHTS, from Andy Lutomirski. 11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic drivers. From Michal Schmidt. 12) Hopefully a complete and correct fix for the genetlink dump locking and module reference counting. From Pravin B Shelar. 13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir. 14) Fix handling of timestamp offset when restoring a snapshotted TCP socket. From Andrew Vagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: fec: fix time stamping logic after napi conversion net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay mISDN: return -EINVAL on error in dsp_control_req() net: revert 8728c544 ("net: dev_pick_tx() fix") Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages" ipv4 tunnels: fix an oops when using ipip/sit with IPsec tipc: set sk_err correctly when connection fails tcp: tcp_make_synack() should use sock_wmalloc bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones ipv6: Don't depend on per socket memory for neighbour discovery messages ipv4: sendto/hdrincl: don't use destination address found in header tcp: don't apply tsoffset if rcv_tsecr is zero tcp: initialize rcv_tstamp for restored sockets net: xilinx: fix memleak net: usb: Add HP hs2434 device to ZLP exception table net: add cpu_relax to busy poll loop net: stmmac: fixed the pbl setting with DT genl: Hold reference on correct module while netlink-dump. genl: Fix genl dumpit() locking. xfrm: Fix potential null pointer dereference in xdst_queue_output ...
-
Ian Campbell authored
Filtering capabilities on my work email are pretty much non-existent and this has turned out to be something of a firehose... Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Olof Johansson <olof@lixom.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains two Oops fixes (opti9xx and HD-audio) and a simple fixup for an Acer laptop. All marked as stable patches" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: opti9xx: Fix conflicting driver object name ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n ALSA: hda - Add inverted digital mic fixup for Acer Aspire One
-
- 30 Aug, 2013 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Two straggling fixes that I had missed as they were posted a couple of weeks ago, causing problems with interrupts (breaking them completely) on the CSR SiRF platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: prima2: drop nr_irqs in mach as we moved to linear irqdomain irqchip: sirf: move from legacy mode to linear irqdomain
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Since we are getting to the pointy end, one i915 black screen on some machines, and one vmwgfx stop userspace ability to nuke the VM, There might be one or two ati or nouveau fixes trickle in before final, but I think this should pretty much be it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Split GMR2_REMAP commands if they are to large drm/i915: ivb: fix edp voltage swing reg val
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer updates from Dmitry Torokhov: "Just a couple of new IDs in Wacom and xpad drivers, i8042 is now disabled on ARC, and data checks in Elantech driver that were overly relaxed by the previous patch are now tightened" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - disable the driver on ARC platforms Input: xpad - add signature for Razer Onza Classic Edition Input: elantech - fix packet check for v3 and v4 hardware Input: wacom - add support for 0x300 and 0x301
-
Richard Cochran authored
Commit dc975382 "net: fec: add napi support to improve proformance" converted the fec driver to the napi model. However, that commit forgot to remove the call to skb_defer_rx_timestamp which is only needed in non-napi drivers. (The function napi_gro_receive eventually calls netif_receive_skb, which in turn calls skb_defer_rx_timestamp.) This patch should also be applied to the 3.9 and 3.10 kernels. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-