- 19 Feb, 2018 5 commits
-
-
Chris Wilson authored
The compiler is not automatically caching the i915->regs address inside a register and emitting a load for every mmio access. For simple functions like gen8_gt_irq_handler that are already using the raw accessors, we can open-code them for substantial savings: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-83 (-83) Function old new delta gen8_gt_irq_handler 290 266 -24 gen8_gt_irq_ack 181 122 -59 Total: Before=954637, After=954554, chg -0.01% v2: Add raw_reg_read/raw_reg_write. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219100926.16554-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Keep the master iir and use it to reduce the number of reads and writes to the GT iir array, i.e. only the bits marked as set by the master iir are valid inside GT iir array and will be handled during the interrupt. Signed-off-by:
-
Chris Wilson authored
As the driver is called to handle circumstances beyond it's control, we cannot assume that the pm_runtime core is happy to see us. For example, if we are called from shrink_slab to free up our pages during suspend, rpm may be disabled and pm_runtime_if_in_use() decides to fail with -EINVAL rather than simply say no. This is expected to happen, so don't warn. For example, [ 217.429228] Suspending console(s) (use no_console_suspend to debug) [ 217.557179] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 217.559399] sd 0:0:0:0: [sda] Stopping disk [ 218.661567] i915 0000:00:02.0: Resetting chip after gpu hang [ 219.523879] ------------[ cut here ]------------ [ 219.524474] pm_runtime_get_if_in_use() failed: -22 [ 219.524817] WARNING: CPU: 1 PID: 14 at drivers/gpu/drm/i915/intel_runtime_pm.c:3351 intel_runtime_pm_get_if_in_use+0xe3/0x150 [i915] [ 219.524836] Modules linked in: vgem i915 snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec r8169 lpc_ich snd_hwdep mii snd_hda_core snd_pcm prime_numbers [ 219.525054] CPU: 1 PID: 14 Comm: cpuhp/1 Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 [ 219.525070] Hardware name: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010 [ 219.525294] RIP: 0010:intel_runtime_pm_get_if_in_use+0xe3/0x150 [i915] [ 219.525313] RSP: 0018:ffff880018f5edf8 EFLAGS: 00010286 [ 219.525344] RAX: dffffc0000000008 RBX: ffff880007fc0000 RCX: 0000000000000000 [ 219.525361] RDX: 0000000000000001 RSI: ffffffff850609c0 RDI: ffffffff872992a0 [ 219.525377] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 219.525394] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880007fc0000 [ 219.525411] R13: ffff880018f5f0f8 R14: ffff880007fc8de8 R15: ffff880018f5f0f0 [ 219.525429] FS: 0000000000000000(0000) GS:ffff880019c80000(0000) knlGS:0000000000000000 [ 219.525446] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 219.525463] CR2: 0000564df7897e86 CR3: 0000000000d7c000 CR4: 00000000000006e0 [ 219.525478] Call Trace: [ 219.525734] i915_gem_shrink+0x841/0xb50 [i915] [ 219.525802] ? debug_check_no_locks_freed+0x2a0/0x2a0 [ 219.525842] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 219.526083] ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915] [ 219.526131] ? lock_acquire+0x138/0x3c0 [ 219.526157] ? lock_acquire+0x138/0x3c0 [ 219.526391] ? shrinker_lock+0x49/0x210 [i915] [ 219.526465] ? mutex_trylock+0x15c/0x1a0 [ 219.526694] ? shrinker_lock+0x49/0x210 [i915] [ 219.526969] ? i915_gem_shrinker_scan+0xc4/0x320 [i915] [ 219.527200] i915_gem_shrinker_scan+0xc4/0x320 [i915] [ 219.527448] ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915] [ 219.527533] shrink_slab.part.18+0x2d0/0x8d0 [ 219.527613] ? unregister_shrinker+0x1f0/0x1f0 [ 219.527668] ? mem_cgroup_iter+0x37d/0xc50 [ 219.527728] shrink_node+0x882/0xbe0 [ 219.527847] ? shrink_node_memcg+0x11c0/0x11c0 [ 219.527882] ? mark_held_locks+0xa8/0xf0 [ 219.527931] ? trace_hardirqs_on_caller+0x33f/0x590 [ 219.527961] ? ktime_get+0xad/0x140 [ 219.528015] do_try_to_free_pages+0x2d3/0xd70 [ 219.528099] ? allow_direct_reclaim.part.23+0x1d0/0x1d0 [ 219.528132] ? shrink_node+0xbe0/0xbe0 [ 219.528213] try_to_free_pages+0x1cd/0x570 [ 219.528257] ? do_try_to_free_pages+0xd70/0xd70 [ 219.528355] __alloc_pages_nodemask+0xadf/0x2110 [ 219.528423] ? unwind_next_frame+0x870/0x1970 [ 219.528465] ? deref_stack_reg+0x97/0xc0 [ 219.528503] ? gfp_pfmemalloc_allowed+0x150/0x150 [ 219.528539] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.528588] ? unwind_next_frame+0x138/0x1970 [ 219.528619] ? kthread+0x30a/0x3d0 [ 219.528677] ? __read_once_size_nocheck.constprop.4+0x10/0x10 [ 219.528698] ? deref_stack_reg+0xc0/0xc0 [ 219.528762] ? __save_stack_trace+0x6e/0xd0 [ 219.528822] depot_save_stack+0x3bc/0x430 [ 219.528870] kasan_kmalloc+0x142/0x170 [ 219.528912] ? __kmalloc+0xf7/0x340 [ 219.528935] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.528957] ? partition_sched_domains+0x4d4/0x840 [ 219.528978] ? sched_cpu_deactivate+0x11b/0x150 [ 219.529001] ? cpuhp_invoke_callback+0x160/0x15f0 [ 219.529023] ? cpuhp_thread_fun+0x35e/0x710 [ 219.529044] ? smpboot_thread_fn+0x50a/0x7f0 [ 219.529065] ? kthread+0x30a/0x3d0 [ 219.529086] ? ret_from_fork+0x24/0x50 [ 219.529141] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529169] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529198] ? set_track+0x87/0x100 [ 219.529225] ? init_object+0x6e/0x80 [ 219.529275] ? ___slab_alloc.constprop.36+0x232/0x3e0 [ 219.529303] ? ___slab_alloc.constprop.36+0x232/0x3e0 [ 219.529325] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529410] ? mark_held_locks+0xa8/0xf0 [ 219.529453] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529479] ? trace_hardirqs_on_caller+0x33f/0x590 [ 219.529532] __kmalloc+0xf7/0x340 [ 219.529557] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529604] register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529684] ? sched_debug_show+0x20/0x20 [ 219.529713] ? debug_object_activate+0x530/0x530 [ 219.529771] ? rcu_lockdep_current_cpu_online+0xdc/0x130 [ 219.529802] ? partition_sched_domains+0x4ae/0x840 [ 219.529825] ? rcu_read_lock_sched_held+0x10f/0x130 [ 219.529875] partition_sched_domains+0x4d4/0x840 [ 219.529955] ? sched_init_domains+0x110/0x110 [ 219.529981] ? __wait_rcu_gp+0x24f/0x390 [ 219.530054] sched_cpu_deactivate+0x11b/0x150 [ 219.530086] ? sched_cpu_activate+0x1e0/0x1e0 [ 219.530112] ? __call_rcu.constprop.53+0x680/0x680 [ 219.530132] ? call_rcu_bh+0x10/0x10 [ 219.530166] ? debug_check_no_locks_freed+0x2a0/0x2a0 [ 219.530201] ? trace_raw_output_rcu_utilization+0xa0/0xa0 [ 219.530267] ? trace_raw_output_rcu_utilization+0xa0/0xa0 [ 219.530337] ? rcu_lockdep_current_cpu_online+0xdc/0x130 [ 219.530370] ? sched_cpu_activate+0x1e0/0x1e0 [ 219.530397] cpuhp_invoke_callback+0x160/0x15f0 [ 219.530424] ? lock_acquire+0x138/0x3c0 [ 219.530445] ? lock_acquire+0x138/0x3c0 [ 219.530471] ? cpuhp_thread_fun+0xaf/0x710 [ 219.530507] ? pci_mmcfg_check_reserved+0x100/0x100 [ 219.530565] cpuhp_thread_fun+0x35e/0x710 [ 219.530618] ? cpuhp_complete_idle_dead+0x10/0x10 [ 219.530639] smpboot_thread_fn+0x50a/0x7f0 [ 219.530678] ? sort_range+0x20/0x20 [ 219.530709] ? __kthread_parkme+0xba/0x1f0 [ 219.530739] ? schedule+0x84/0x1a0 [ 219.530768] ? __kthread_parkme+0xbf/0x1f0 [ 219.530805] ? sort_range+0x20/0x20 [ 219.530831] kthread+0x30a/0x3d0 [ 219.530859] ? _kthread_create_on_node+0xb0/0xb0 [ 219.530900] ret_from_fork+0x24/0x50 [ 219.530999] Code: 01 00 00 00 85 c0 74 4a 89 e8 5b 5d c3 80 3d 48 37 4e 00 00 75 f2 89 c6 48 c7 c7 40 f0 61 c0 c6 05 36 37 4e 00 01 e8 ed 2a e1 c2 <0f> ff eb d9 80 3d 3f 37 4e 00 00 75 94 48 c7 c7 60 e8 61 c0 c6 [ 219.531880] ---[ end trace 18ec0139488ea0c8 ]--- [ 219.607967] IRQ 16: no longer affine to CPU1 [ 219.670291] IRQ 24: no longer affine to CPU2 [ 219.701489] IRQ 8: no longer affine to CPU3 [ 219.701529] IRQ 9: no longer affine to CPU3 [ 219.701582] IRQ 18: no longer affine to CPU3 [ 219.701640] IRQ 25: no longer affine to CPU3 [ 219.743857] cache: parent cpu1 should not be sleeping [ 219.784549] cache: parent cpu2 should not be sleeping [ 219.816041] cache: parent cpu3 should not be sleeping v2: Add Returns: information to intel_runtime_pm_get_if_in_use() kerneldoc. Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219125046.19363-1-chris@chris-wilson.co.uk
-
Mauro Carvalho Chehab authored
The in-lined comments for channel.port doesn't follow the syntax described at kernel-doc document, causing the following warning: $ ./scripts/kernel-doc -none drivers/gpu/drm/i915/intel_dpio_phy.c drivers/gpu/drm/i915/intel_dpio_phy.c:154: warning: Function parameter or member 'channel.port' not described in 'bxt_ddi_phy_info' While the best would be for the Kernel to deduce that from the context, supporting it is not trivial. So, let's just stick with the existing syntax. [Jani: depends on "scripts: kernel-doc: support in-line comments on nested structs/unions" to actually fix the warning.] Reported-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Maarten Lankhorst authored
Hitting the failure path through check_digital_port_conflicts triggers: ================================================ WARNING: lock held when returning to user space! 4.16.0-rc1-CI-kasan_1+ #1 Tainted: G W ------------------------------------------------ kms_3d/1439 is leaving the kernel with locks still held! 1 lock held by kms_3d/1439: #0: (drm_connector_list_iter){.+.+}, at: [<000000003745d183>] intel_atomic_check+0x1d9d/0x3ff0 [i915] Rearrange the code to have a single exit path through the unlock. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 16 Feb, 2018 3 commits
-
-
Chris Wilson authored
We can't assert that the execlists are active before we set the flag. So perform the assert after we are expected to have marked the execlists active. Fixes: 339ccd35 ("drm/i915: Assert that we always complete a submission to guc/execlists") Signed-off-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180216153210.30551-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The continual resubmission model for execlists (and emulated over guc) requires that we keep feeding requests into the HW in order to generate more CS interrupts to drain the rest of the queue. Add a couple of asserts to ensure that we don't skip a cycle and come to a grinding halt. Signed-off-by:
-
Christian König authored
i915 is the only driver using those fields in the drm_gem_object structure, so they only waste memory for all other drivers. Move the fields into drm_i915_gem_object instead and patch the i915 code with the following sed commands: sed -i "s/obj->base.read_domains/obj->read_domains/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c sed -i "s/obj->base.write_domain/obj->write_domain/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c Change is only compile tested. v2: move fields around as suggested by Chris. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
- 15 Feb, 2018 20 commits
-
-
Mahesh Kumar authored
Register Address for CNL_PORT_DW5_LN0_D is 0x162E54, but current code is defining it as 0x162ED4. Similarly for CNL_PORT_DW7_LN0_D register address is defined 0x162EDC instead of 0x162E5C, fix it. Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Fixes: 04416108 ("drm/i915/cnl: Add registers related to voltage swing sequences.") Reviewed-by:
-
Dhinakaran Pandiyan authored
The frame counter may have got reset between disabling and enabling vblank interrupts due to DMC putting the hardware to DC5/6 states if PSR was active. The frame counter could also have stalled if PSR was active in case there was no DMC. The frame counter resetting has a user visible impact of screen freezes. Make use of drm_vblank_restore() to compute missed vblanks for the duration in which vblank interrupts were disabled and update the vblank counter with this value as diff. There's no need to check if PSR was actually active in the interrupt disabled duration, so simplify the check to a feature check. Enabling vblank interrupts wakes up the hardware from DC5/6 and prevents it from going back again as long as the there are pending interrupts. So, we don't have to explicity disallow DC5/6 after enabling vblank interrupts to keep the counter running. This change is not applicable to CHV, as enabling interrupts does not prevent the hardware from activating PSR. v2: Added comments(Rodrigo) and rewrote commit message. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dhinakaran Pandiyan authored
The HW frame counter can get reset if device enters a low power state after vblank interrupts were disabled. This messes up any following vblank count update as a negative diff (huge unsigned diff) is calculated from the HW frame counter change. We cannot ignore negative diffs altogther as there could be legitimate wrap arounds. So, allow drivers to update vblank->count with missed vblanks for the time interrupts were disabled. This is similar to _crtc_vblank_on() except that vblanks interrupts are not enabled at the end as this function is expected to be called from the driver _enable_vblank() vfunc. v2: drm_crtc_vblank_restore should take crtc as arg. (Chris) Add docs and sprinkle some asserts. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: -
Dhinakaran Pandiyan authored
Updating vblank counts requires register reads and these reads may not return meaningful values if the device was in a low power state after vblank interrupts were last disabled. So, update the count only if vblank interrupts are enabled. Secondly, this means the registers should be read before disabling vblank interrupts. v2: Don't check vblank->enabled outside it's lock (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. The flip ioctl receives a 32-bit target sequence from user space and is compared against the current sequence from drm_crtc_vblank_count(). So, typecast return from drm_crtc_vblank_count() explicitly to add clarity. __drm_crtcs_state.last_vblank_count however only ever stores the value from drm_crtc_vblank_count() and can be upgraded to u64. Cc: Keith Packard <keithp@keithp.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. This could cause potential problems if the return value is used in arithmetic operations with a 32-bit reference HW vblank count. Explicitly typecasting this down to u32 either fixes a potential problem or serves to add clarity in case the implicit typecasting was already correct. Cc: Keith Packard <keithp@keithp.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. This could cause potential problems if the return value is used in arithmetic operations with a 32-bit reference HW vblank count. Explicitly typecasting this down to u32 either fixes a potential problem or serves to add clarity in case the implicit typecasting was already correct. Cc: Keith Packard <keithp@keithp.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. This could cause potential problems if the return value is used in arithmetic operations with a 32-bit reference HW vblank count. Explicitly typecasting this down to u32 either fixes a potential problem or serves to add clarity in case the typecasting was implicitly done. Cc: Keith Packard <keithp@keithp.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> for both this patch Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64, store all the bits without truncating. There is no need to type cast this value down to 32-bits. Cc: Keith Packard <keithp@keithp.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Core returns a u64 vblank count and intel_crtc_get_vblank_counter() expects a 32-bit value. Make the typecast explicit to add clarity. Cc: Keith Packard <keithp@keithp.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
drm_vblank_count() has an u32 type returning what is a 64-bit vblank count. The effect of this is when drm_wait_vblank_ioctl() tries to widen the user space requested vblank sequence using this clipped 32-bit count(when the value is >= 2^32) as reference, the requested sequence remains a 32-bit value and gets queued like that. However, the code that checks if the requested sequence has passed compares this against the 64-bit vblank count. With drm_vblank_count() returning all bits of the vblank count, update drm_crtc_accurate_vblank_count() so that drm_crtc_arm_vblank_event() queues the correct sequence. Otherwise, this leads to prolonged waits for a vblank sequence when the current count is >=2^32. Finally, fix drm_wait_one_vblank() too. v2: Commit message fix (Keith) Squash commits (Rodrigo) Fixes: 570e8696 ("drm: Widen vblank count to 64-bits [v3]") Cc: Keith Packard <keithp@keithp.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: -
Gustavo A. R. Silva authored
Fix inconsistent IS_ERR and PTR_ERR in shrink_boom. The proper pointer to use is _explode_ instead of _purge_. This issue was detected with the help of Coccinelle. Fixes: fe215c8b ("drm/i915/selftests: add missing gtt shrinker test") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214211234.GA22341@embeddedgusReviewed-by:
-
Chris Wilson authored
Rather than deriving the platform_mask from the intel_device_static_info->platform at runtime, pre-fill it in the static data. v2: Undefine macros at end of their scope Signed-off-by:
-
Chris Wilson authored
Be consistent and define the device's GEN as part of the GENx_FEATURE. It will be overridden by the next gen upon inheriting, as per usual. Signed-off-by:
-
Chris Wilson authored
Rather than deriving the gen_mask from the static intel_device_info->gen at runtime, pre-fill it in the static data. v2: Undefine local macros at end of their scope. Signed-off-by:
-
Chris Wilson authored
As we presume that we have sufficient coverage of CI for new machines and new code paths, we do not need to have user impacting WARN_ON for programming errors inside i915_gem_gtt.c, so convert those over to GEM_BUG_ON. This leaves the memory debugging WARN_ON in place as they are not so easy to exercise with CI. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180215110759.28603-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
As befitting a file dedicated to the mistakes of the past, drivers/gpu/drm/i915/i915_ioc32.c:2: warning: Cannot understand * \file i915_ioc32.c on line 2 - I thought it was a doc line drivers/gpu/drm/i915/i915_ioc32.c:82: warning: Function parameter or member 'filp' not described in 'i915_compat_ioctl' drivers/gpu/drm/i915/i915_ioc32.c:82: warning: Function parameter or member 'cmd' not described in 'i915_compat_ioctl' drivers/gpu/drm/i915/i915_ioc32.c:82: warning: Function parameter or member 'arg' not described in 'i915_compat_ioctl' Signed-off-by:
-
Jani Nikula authored
Turns out -1 >= ARRAY_SIZE() is always true. Move the bounds check where we know pipe >= 0 and next to the array indexing where it makes most sense. Fixes: 9965db26 ("drm/i915: Check for fused or unused pipes") Fixes: 0b7029b7 ("drm/i915: Check for fused or unused pipes") Cc: <stable@vger.kernel.org> # v4.10+ Cc: Mika Kahola <mika.kahola@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
We now have a stable cnl on our CI and it seems mostly green without big risks of blank screen or anything blowing up on linux installations in the future. As a reminder i915.alpha_support was created to protect future linux installation's iso images that might contain a kernel from the enabling time of the new platform. Without this protection most of linux installation was recommending nomodeset option during installation that was getting stick there after installation. Specifically, alpha support says nothing about the development state of the hardware, and everything about the state of the driver in a kernel release. This is semantically no different from the old preliminary_hw_support flag, but the old one was all too often interpreted as (preliminary hw) support instead of the intended (preliminary) hw support, and it was misleading for everyone. Hence the rename. v2: Fix the typos and include more history about the parameter rename on commit message. (Jani) Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-cnl-y3.html Cc: James Ausmus <james.ausmus@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Add one missing PCI ID and sort them in a way that gets easier to review and compare against spec's table. When trying to sync libdrm and mesa id list with kernel and spec I noticed something was wrong and we were missing a pci id. So to make our lives easier when checking against spec let's simplify and sort like spec does. BSpec: 13621 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180208073219.27860-1-rodrigo.vivi@intel.com
-
- 14 Feb, 2018 12 commits
-
-
Daniele Ceraolo Spurio authored
GENMASK_ULL wants the high bit of the mask first. The current value cancels the in-fence when an out-fence is returned. Fixes: fec0445c ("drm/i915: Support explicit fencing for execbuf") Testcase: igt/gem_exec_fence/keep-in-fence* Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_pm.c:750: warning: Function parameter or member 'fifo_size' not described in 'intel_calculate_wm' drivers/gpu/drm/i915/intel_pm.c:5900: warning: Function parameter or member 'crtc' not described in 'intel_update_watermarks' Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'dev_priv' not described in 'intel_PLL_is_valid' drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'limit' not described in 'intel_PLL_is_valid' drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'clock' not described in 'intel_PLL_is_valid' drivers/gpu/drm/i915/intel_display.c:4769: warning: Function parameter or member 'crtc_state' not described in 'skl_update_scaler_plane' drivers/gpu/drm/i915/intel_display.c:4769: warning: Excess function parameter 'state' description in 'skl_update_scaler_plane' drivers/gpu/drm/i915/intel_display.c:4967: warning: Function parameter or member 'new_crtc_state' not described in 'intel_post_enable_primary' drivers/gpu/drm/i915/intel_display.c:12650: warning: Function parameter or member 'new_state' not described in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/intel_display.c:12650: warning: Excess function parameter 'fb' description in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/intel_display.c:12763: warning: Function parameter or member 'old_state' not described in 'intel_cleanup_plane_fb' drivers/gpu/drm/i915/intel_display.c:12763: warning: Excess function parameter 'fb' description in 'intel_cleanup_plane_fb' Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_atomic.c:198: warning: Function parameter or member 'state' not described in 'intel_crtc_destroy_state' drivers/gpu/drm/i915/intel_atomic.c:222: warning: Function parameter or member 'intel_crtc' not described in 'intel_atomic_setup_scalers' drivers/gpu/drm/i915/intel_atomic.c:222: warning: Excess function parameter 'crtc' description in 'intel_atomic_setup_scalers' Signed-off-by:
-
Chris Wilson authored
Just a parameter name change that was lost to kerneldoc. drivers/gpu/drm/i915/intel_uc_fw.c:209: warning: Function parameter or member 'xfer' not described in 'intel_uc_fw_upload' drivers/gpu/drm/i915/intel_uc_fw.c:209: warning: Excess function parameter 'loader' description in 'intel_uc_fw_upload' v2: Add the Returns: Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214105332.30230-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
During the recent upheaval to uc, the parameters to huc_ucode_xfer were changed, but the kerneldoc left behind. drivers/gpu/drm/i915/intel_huc.c:128: warning: Function parameter or member 'huc_fw' not described in 'huc_ucode_xfer' drivers/gpu/drm/i915/intel_huc.c:128: warning: Function parameter or member 'vma' not described in 'huc_ucode_xfer' drivers/gpu/drm/i915/intel_huc.c:128: warning: Excess function parameter 'dev_priv' description in 'huc_ucode_xfer' Signed-off-by:
-
Chris Wilson authored
Remove the kerneldoc markup applied to non-kerneldoc comments and convert the multiline comments to the canonical style. drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'encoder' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'pipe_config' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'conn_state' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'connector' not described in 'intel_lvds_detect' drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'force' not described in 'intel_lvds_detect' drivers/gpu/drm/i915/intel_lvds.c:471: warning: Function parameter or member 'connector' not described in 'intel_lvds_get_modes' drivers/gpu/drm/i915/intel_lvds.c:932: warning: Function parameter or member 'dev_priv' not described in 'intel_lvds_init' drivers/gpu/drm/i915/intel_lvds.c:932: warning: Excess function parameter 'dev' description in 'intel_lvds_init' Signed-off-by:
-
Chris Wilson authored
Remove the kerneldoc markup applied to non-kerneldoc comments and convert the multiline comments to the canonical style. drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member 'connector' not described in 'intel_dvo_detect' drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member 'force' not described in 'intel_dvo_detect' drivers/gpu/drm/i915/intel_dvo.c:382: warning: Function parameter or member 'encoder' not described in 'intel_dvo_get_current_mode' Signed-off-by:
-
Chris Wilson authored
Regular comments where being marked up for kerneldoc, but were not formatted properly. Remove the markup to remove the warnings. drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'dvo' not described in 'ivch_read' drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'addr' not described in 'ivch_read' drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'data' not described in 'ivch_read' Signed-off-by:
-
Chris Wilson authored
The code describes what it is doing quite well; and that is now much more complex than what the old comment would let you believe. drivers/gpu/drm/i915/intel_crt.c:486: warning: Function parameter or member 'connector' not described in 'intel_crt_detect_hotplug' Signed-off-by:
-
Chris Wilson authored
Split the 64b multiplication from the division so that it doesn't sprawl across a couple of lines and use mul_u32_u32() instead of open-coding the 64b conversion. Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'source_min' not described in 'scale' drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'source_max' not described in 'scale' drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'target_min' not described in 'scale' drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'target_max' not described in 'scale' Signed-off-by:
-
