Just re-order the cx5066_fixups[] entries for HP devices for avoiding
the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-14-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all.  That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.

Let's unify them with the single vendor-quirk entry.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices
for avoiding the oversight of the duplicated or unapplied item in
future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-12-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung
and Lemote devices for avoiding the oversight of the duplicated or
unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-11-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for ASUS devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-8-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Dell devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-7-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-6-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way.  So now we simply keep
the PCI SSID order for the whole.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc882_fixup_tbl[] entries for Clevo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also, user lower hex letters in the entry.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Variable len is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

sound/usb/mixer.c:2713:3: warning: Value stored to 'len' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619519194-57806-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This applies a SND_PCI_QUIRK(...) to the Clevo PCx0Dx barebones. This
fix enables audio output over the headset jack and ensures that a
microphone connected via the headset combo jack is correctly recognized
when pluged in.

[ Rearranged the list entries in a sorted order -- tiwai ]
Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210427153025.451118-1-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

make W=1 warning:

sound/virtio/virtio_ctl_msg.c:70: warning: expecting prototype for
virtsnd_ctl_msg_request(). Prototype was for
virtsnd_ctl_msg_response() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426213902.234711-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Cracking noises have been reported on the built-in speaker for certain
Bullseye platforms, when volume is > 80%.

This issue is caused by the specific combination of Codec and AMP in
this platform, and cannot be fixed by the AMP, so indead must be fixed
at codec level, by adding attenuation to the volume.

Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1924997Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-3-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

After booting for first time on Bullseye, the DMIC is currently muted.
Instead, the DMIC volume should be set to a valid initial value.

Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1923557Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-2-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

In snd_sb_qsound_build, snd_ctl_add(..,p->qsound_switch...) and
snd_ctl_add(..,p->qsound_space..) are called. But the second
arguments of snd_ctl_add() could be freed via snd_ctl_add_replace()
->snd_ctl_free_one(). After the error code is returned,
snd_sb_qsound_destroy(p) is called in __error branch.

But in snd_sb_qsound_destroy(), the freed p->qsound_switch and
p->qsound_space are still used by snd_ctl_remove().

My patch set p->qsound_switch and p->qsound_space to NULL if
snd_ctl_add() failed to avoid the uaf bugs. But these codes need
to further be improved with the code style.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426145541.8070-1-lyl2019@mail.ustc.edu.cnSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.13

A lot of changes here for quite a quiet release in subsystem terms -
there's been a lot of fixes and cleanups all over the subsystem both
from generic work and from people working on specific drivers.

 - More cleanup and consolidation work in the core and the generic card
   drivers from Morimoto-san.
 - Lots of cppcheck fixes for Pierre-Louis Brossart.
 - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
   accessory detection, and Realtek RT1019, RT1316, RT711 and RT715.

Our code analyzer reported a uaf.

In snd_emu8000_create_mixer, the callee snd_ctl_add(..,emu->controls[i])
calls snd_ctl_add_replace(.., kcontrol,..). Inside snd_ctl_add_replace(),
if error happens, kcontrol will be freed by snd_ctl_free_one(kcontrol).
Then emu->controls[i] points to a freed memory, and the execution comes
to __error branch of snd_emu8000_create_mixer. The freed emu->controls[i]
is used in snd_ctl_remove(card, emu->controls[i]).

My patch set emu->controls[i] to NULL if snd_ctl_add() failed to avoid
the uaf.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426131129.4796-1-lyl2019@mail.ustc.edu.cnSigned-off-by: Takashi Iwai <tiwai@suse.de>

Remove a duplicate vendor+subvendor pin fixup entry as one is masking
the other and making it unreachable. Consider the more specific newcomer
as a second chance instead.

The generic entry is made less strict to also match for laptops with
slightly different 0x12 pin configuration. Tested on Lenovo Yoga 6 (AMD)
where 0x12 is 0x40000000.

Fixes: 607184cb ("ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YIXS+GT/dGI/LtK6@yogaSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent endpoint management change for implicit feedback mode added
a clearance of ep->sync_sink (formerly ep->sync_slave) pointer at
snd_usb_endpoint_stop() to assure no leftover for the feedback from
the already stopped capture stream.  This turned out to cause a
regression, however, when full-duplex streams were running and only a
capture was stopped.  Because of the above clearance of ep->sync_sink
pointer, no more feedback is done, hence the playback will stall.

This patch fixes the ep->sync_sink clearance to be done only after all
endpoints are released, for addressing the regression.
Reported-and-tested-by: Lucas Endres <jaffa225man@gmail.com>
Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426063349.18601-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

A KernelCI bisection identified 59c35c44 "ASoC: simple-card: add
simple_parse_node()" as causing simple-card to fail to instantiate on
kontron-sl28-var3-ads2 systems.  Since the merge window is expected to
open over the weekend drop that commit and subsequent ones which depend
on it for now in case other systems are affected too.

The boot log showed the error as:

<4>[    9.948821] sysfs: cannot create duplicate filename '/devices/platform/sound/(null)-wm8904-hifi'

(backtrace)

<3>[   10.191982] kobject_add_internal failed for (null)-wm8904-hifi with -EEXIST, don't try to register things with the same name in the same directory.

The dropped commits are:

73371bac "ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()"
43439227 "ASoC: simple-card: add simple_link_init()"
59c35c44 "ASoC: simple-card: add simple_parse_node()"
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds the return value when the volume settings were changed.
The userspace application might monitor the kcontrols to check which control changed.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The DAPM event and mixer control could mute/unmute the capture directly.
That will be confused that capture still works if the user settings is unmute before the capture.
Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210422103220.21987-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of using the clk embedded in the clk_hw (which is meant to go
away), a clock provider which need to interact with its own clock should
request clk reference through the clock provider API.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Clock providers should be registered using the clk_hw API.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-5-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Clock drivers ops should not call the clk API but the clock provider
(clk_hw) instead.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-4-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Clock providers should use the clk_hw API
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-3-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of using the clk embedded in the clk_hw (which is meant to go
away), a clock provider which need to interact with its own clock should
request clk reference through the clock provider API.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-2-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Through the examinations and experiments with lots of Roland and BOSS
USB-audio devices, we found out that the recently introduced
full-duplex operations with the implicit feedback mode work fine for
quite a few devices, while the others need only the capture-side quirk
to enforce the full-duplex mode.  The recent commit d86f43b1
("ALSA: usb-audio: Add support for many Roland devices' implicit
feedback quirks") tried to add such quirk entries manually in the
lists, but this turned out to be too many and error-prone, hence it
was reverted again.

This patch is another attempt to cover those missing Roland/BOSS
devices but in a more generic way.  It matches the devices with the
vendor ID 0x0582, and checks whether they are with both ASYNC sync
types or ASYNC is only for capture device.  In the former case, it's
the device with the implicit feedback mode, and applies accordingly.
In both cases, the capture stream requires always the full-duplex
mode, and we apply the known capture quirk for that, too.

Basically the already existing BOSS device quirk entries become
redundant after this generic matching, so those are removed.  Although
the capture_implicit_fb_quirks[] table became empty and superfluous, I
keep it for now, so that people can put a special device easily at any
time later again.

Link: https://lore.kernel.org/r/CAOsVg8rA61B=005_VyUwpw3piVwA7Bo5fs1GYEB054efyzGjLw@mail.gmail.com
Link: https://lore.kernel.org/r/20210414083255.9527-1-tiwai@suse.de
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212519Tested-by: Lucas Endres <jaffa225man@gmail.com>
Link: https://lore.kernel.org/r/20210422120413.457-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit d86f43b1 ("ALSA: usb-audio: Add support for
many Roland devices' feedback quirks").

It turned out that many quirk entries there don't contain the proper
EP values and/or the quirk types, which lead to the broken
operations.

As we're going to cover all Roland/BOSS devices in a more generic way
rather the explicit lists, let's revert the previous additions at
first.

Fixes: d86f43b1 ("ALSA: usb-audio: Add support for many Roland devices' implicit feedback quirks")
Link: https://lore.kernel.org/r/20210422120413.457-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

A reorganization of the driver source led to two of them causing
a compile time warning in some configurations:

tegra/tegra20_spdif.c:36:12: error: 'tegra20_spdif_runtime_resume' defined but not used [-Werror=unused-function]
   36 | static int tegra20_spdif_runtime_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra20_spdif.c:27:12: error: 'tegra20_spdif_runtime_suspend' defined but not used [-Werror=unused-function]
   27 | static int tegra20_spdif_runtime_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:64:12: error: 'tegra30_ahub_runtime_resume' defined but not used [-Werror=unused-function]
   64 | static int tegra30_ahub_runtime_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:43:12: error: 'tegra30_ahub_runtime_suspend' defined but not used [-Werror=unused-function]
   43 | static int tegra30_ahub_runtime_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to avoid this kind of warning.

Fixes: b5571449 ("ASoC: tegra30: ahub: Remove handing of disabled runtime PM")
Fixes: c53b396f ("ASoC: tegra20: spdif: Remove handing of disabled runtime PM")
Fixes: 80ec4a4c ("ASoC: tegra20: i2s: Remove handing of disabled runtime PM")
Fixes: b5f6f781 ("ASoC: tegra30: i2s: Remove handing of disabled runtime PM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210422133418.1757893-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Configuring number of channels per LRCLK frame by using e.g.
snd_soc_dai_set_tdm_slot before configuring DAI format was being
overwritten by the latter due to a regmap_write which would write over
the whole register.
Signed-off-by: Niklas Carlsson <niklasc@axis.com>
Link: https://lore.kernel.org/r/20210422130226.15201-1-Niklas.Carlsson@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use local variable at local area only.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6psi417.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds simple_link_init() and share dai_link setting code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bla8i41b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Parse dai/tdm/clk are common for both CPU/Codec node.
This patch creates simple_parse_node() for it and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czuoi41f.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>