This array property is used to indicate the maximum burst transaction
length supported by each DMA channel.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200723005848.31907-3-Sergey.Semin@baikalelectronics.ruSigned-off-by: Vinod Koul <vkoul@kernel.org>

Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces the Synopsis
Designware DMA controller legacy bare text bindings with YAML file.
The only required prorties are "compatible", "reg", "#dma-cells" and
"interrupts", which will be used by the driver to correctly find the
controller memory region and handle its events. The rest of the properties
are optional, since in case if either "dma-channels" or "dma-masters" isn't
specified, the driver will attempt to auto-detect the IP core
configuration.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200723005848.31907-2-Sergey.Semin@baikalelectronics.ruSigned-off-by: Vinod Koul <vkoul@kernel.org>

The CAP3 register contains information about the number of
HCHAN (High Capacity) and UCHAN (Ultra High Capacity) channels in UDMAP.

Based on this information the start indexes of the levels can be calculated
without a need of a table in the match data.

On am654 the CAP3 does not contain information about the number different
channels. Set up the tpl information based on the available documentation.

This change will allow to use the same compatible for different SoCs where
the only difference is the number of channel types.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-3-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add defines for the CAP register fields to make the code self explaining.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-2-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add binding for R8A774E1 SoC (RZ/G2H).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1594919915-5225-13-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the doubled word "has" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/06e64046-ebf1-15db-dbaf-73698de3b493@infradead.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Extend NXP QDMA driver to check transmission errors

The NXP QDMA driver (fsl-qdma.c) does not check the status bits
that indicate if a DMA transfer has been completed successfully.
This patch extends the driver to do exactly this.
Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Link: https://lore.kernel.org/r/744443c0462aac2df4754f99500a911527c0b235.camel@bosch.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add Tudor Ambarus as co-maintainer for both Microchip DMA drivers and
take the opportunity to merge both entries.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20200716071524.25642-1-ludovic.desroches@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/ioat/dma.c:202: warning: Function parameter or member 'ioat_chan' not described in 'ioat_update_pending'
 drivers/dma/ioat/dma.c:202: warning: Excess function parameter 'ioat' description in 'ioat_update_pending'
 drivers/dma/ioat/dma.c:465: warning: Function parameter or member 'ioat_chan' not described in 'ioat_check_space_lock'
 drivers/dma/ioat/dma.c:465: warning: Excess function parameter 'ioat' description in 'ioat_check_space_lock'
 drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'ioat_chan' not described in '__cleanup'
 drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'phys_complete' not described in '__cleanup'
 drivers/dma/ioat/dma.c:591: warning: Excess function parameter 'ioat' description in '__cleanup'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-18-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/ioat/init.c:608: warning: Function parameter or member 'c' not described in 'ioat_free_chan_resources'
 drivers/dma/ioat/init.c:608: warning: Excess function parameter 'chan' description in 'ioat_free_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-17-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'clk' not described in 'mv_xor_v2_device'
 drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'reg_clk' not described in 'mv_xor_v2_device'
 drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'irq_tasklet' not described in 'mv_xor_v2_device'
 drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'hw_queue_idx' not described in 'mv_xor_v2_device'
 drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'msi_desc' not described in 'mv_xor_v2_device'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-16-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'dev' not described in 'xgene_dma'
 drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'clk' not described in 'xgene_dma'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Prasad Sahu <rsahu@apm.com>
Cc: Loc Ho <lho@apm.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-15-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/nbpfaxi.c:157: warning: Function parameter or member 'chan' not described in 'nbpf_desc'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'tasklet' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_addr' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_width' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_burst' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_addr' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_width' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_burst' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'running' not described in 'nbpf_channel'
 drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'paused' not described in 'nbpf_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20200714111546.1755231-14-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Also remove superfluous entry.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/iop-adma.c:418: warning: Function parameter or member 'chan' not described in 'iop_adma_alloc_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-13-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'slave_config' not described in 'sdma_channel'
 drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'context_loaded' not described in 'sdma_channel'
 drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'terminate_worker' not described in 'sdma_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-12-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Kerneldoc formatting for attributes should be '@.*: '.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/fsl-qdma.c:154: warning: Function parameter or member 'data' not described in 'fsl_qdma_format'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Wen He <wen.he_1@nxp.com>
Cc: Jiaheng Fan <jiaheng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-11-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

No attempt has been made to document any of the demoted functions here.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'priv' not described in '__execute_vchan_pending'
 drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'vchan' not described in '__execute_vchan_pending'
 drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'chan' not described in 'generate_ndma_promise'
 drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'src' not described in 'generate_ndma_promise'
 drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'dest' not described in 'generate_ndma_promise'
 drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'len' not described in 'generate_ndma_promise'
 drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'sconfig' not described in 'generate_ndma_promise'
 drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'direction' not described in 'generate_ndma_promise'
 drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'chan' not described in 'generate_ddma_promise'
 drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'src' not described in 'generate_ddma_promise'
 drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'dest' not described in 'generate_ddma_promise'
 drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'len' not described in 'generate_ddma_promise'
 drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'sconfig' not described in 'generate_ddma_promise'
 drivers/dma/sun4i-dma.c:577: warning: Function parameter or member 'contract' not described in 'get_next_cyclic_promise'
 drivers/dma/sun4i-dma.c:596: warning: Function parameter or member 'vd' not described in 'sun4i_dma_free_contract'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Link: https://lore.kernel.org/r/20200714111546.1755231-10-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/at_hdmac.c:666: warning: Function parameter or member 'tx' not described in 'atc_tx_submit'
 drivers/dma/at_hdmac.c:666: warning: Excess function parameter 'desc' description in 'atc_tx_submit'
 drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_check_values'
 drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_check_values'
 drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_check_values'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'chan' not described in 'atc_dma_cyclic_fill_desc'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'desc' not described in 'atc_dma_cyclic_fill_desc'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_index' not described in 'atc_dma_cyclic_fill_desc'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_fill_desc'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_fill_desc'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_fill_desc'
 drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'direction' not described in 'atc_dma_cyclic_fill_desc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-9-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix some misspelling/description issues, demote non-kerneldoc header
to standard comment block and provide a new description for
msgdma_desc_config()'s 'stride' parameter.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'node' not described in 'msgdma_sw_desc'
 drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'tx_list' not described in 'msgdma_sw_desc'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'lock' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dev' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq_tasklet' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'pending_list' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'free_list' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'active_list' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'done_list' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc_free_cnt' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'idle' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmadev' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmachan' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'hw_desq' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'sw_desq' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'npendings' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'slave_cfg' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'csr' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'resp' not described in 'msgdma_device'
 drivers/dma/altera-msgdma.c:265: warning: Function parameter or member 'stride' not described in 'msgdma_desc_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Stefan Roese <sr@denx.de>
Link: https://lore.kernel.org/r/20200714111546.1755231-8-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/ste_dma40.c:398: warning: Function parameter or member 'dma_addr' not described in 'd40_lcla_pool'
 drivers/dma/ste_dma40.c:601: warning: Function parameter or member 'dma_parms' not described in 'd40_base'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-7-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

No 'struct' title is provided.  Nor are any attribute descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/pl330.c:295: warning: cannot understand function prototype: 'struct pl330_reqcfg '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jaswinder Singh <jassi.brar@samsung.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-6-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

No attempt has been made to document any of the demoted functions here.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/mmp_pdma.c:298: warning: Function parameter or member 'chan' not described in 'start_pending_queue'
 drivers/dma/mmp_pdma.c:393: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_alloc_chan_resources'
 drivers/dma/mmp_pdma.c:862: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_issue_pending'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-5-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

A couple of entries were missed, causing kerneldoc to complain.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/ep93xx_dma.c:183: warning: Function parameter or member 'slave_config' not described in 'ep93xx_dma_chan'
 drivers/dma/ep93xx_dma.c:215: warning: Function parameter or member 'hw_synchronize' not described in 'ep93xx_dma_engine'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Link: https://lore.kernel.org/r/20200714111546.1755231-4-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/dma/of-dma.c:57: warning: Function parameter or member 'ofdma' not described in 'of_dma_router_xlate'
 drivers/dma/of-dma.c:57: warning: Excess function parameter 'of_dma' description in 'of_dma_router_xlate'
 drivers/dma/of-dma.c:107: warning: Function parameter or member 'data' not described in 'of_dma_controller_register'
 drivers/dma/of-dma.c:308: warning: Function parameter or member 'ofdma' not described in 'of_dma_simple_xlate'
 drivers/dma/of-dma.c:308: warning: Excess function parameter 'of_dma' description in 'of_dma_simple_xlate'
 drivers/dma/of-dma.c:338: warning: Function parameter or member 'ofdma' not described in 'of_dma_xlate_by_chan_id'
 drivers/dma/of-dma.c:338: warning: Excess function parameter 'of_dma' description in 'of_dma_xlate_by_chan_id'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-3-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Struct attribute names must be an exact match or the kerneldoc checker
gets confused.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc1' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc2' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc3' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc4' not described in 'mtk_hsdma_pdesc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200714111546.1755231-2-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Renesas RZ/G2H (R8A774E1) SoC also has the R-Car gen3 compatible
DMA controllers, therefore document RZ/G2H specific bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1594676120-5862-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedorSigned-off-by: Vinod Koul <vkoul@kernel.org>

Move the uc->tchan/rchan checks to the IO wrappers itself instead of
calling the functions with tchan/rchan directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write),
use the underlying register access functions directly.

This will allow changes in the higher level wrappers within the DMAengine
driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The register offsets and functions are the same among TCHAN and RCHAN.
Use generic, common names for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-4-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The ring_get_occ is redundant as the k3_ringacc_ring_pop() is also
checking the occ of the ring.

With removing the ring_get_occ, the function can be simplified as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-3-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The descriptors are allocated via wither dma_pool or dma_alloc_coherent.

There is no need for the dma_sync_singel_* calls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-2-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix build errors when CONFIG_PCI_MSI is not enabled by making the
driver depend on PCI_MSI:

ld: drivers/dma/idxd/device.o: in function `idxd_mask_msix_vector':
device.c:(.text+0x26f): undefined reference to `pci_msi_mask_irq'
ld: drivers/dma/idxd/device.o: in function `idxd_unmask_msix_vector':
device.c:(.text+0x2af): undefined reference to `pci_msi_unmask_irq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/9dee3f46-70d9-ea75-10cb-5527ab297d1d@infradead.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch adds the qurik to use burst transfers only
for pl330 controller, even for request with a length of 1.

Although, the correct way should be: if the peripheral request
length is 1, the peripheral should use SINGLE request, and then
notify the dmac using SINGLE mode by src/dst_maxburst with 1.

For example, on the Rockchip SoCs, all the peripherals can use
SINGLE or BURST request by setting GRF registers. it is possible
that if these peripheral drivers are used only for Rockchip SoCs.
Unfortunately, it's not, such as dw uart, which is used so widely,
and we can't set src/dst_maxburst according to the SoCs' specific
to compatible with all the other SoCs.

So, for convenience, all the peripherals are set as BURST request
by default on the Rockchip SoCs. even for request with a length of 1.
the current pl330 driver will perform SINGLE transfer if the client's
maxburst is 1, which still should be working according to chapter 2.6.6
of datasheet which describe how DMAC performs SINGLE transfers for
a BURST request. Unfortunately, it's broken on the Rockchip SoCs,
which support only matching transfers, such as BURST transfer for
BURST request, SINGLE transfer for SINGLE request.

Finally, we add the quirk to specify pl330 to use burst transfers only.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-5-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch Adds the quirk 'arm,pl330-periph-burst' for pl330.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1593439555-68130-4-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Only the unaligned burst transfers have the dregs.
so, still use BURST transfer with a reduced size
for better performance.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-3-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is no reason to limit the performance on the 'NO-FLUSHP' SoCs,
because 'FLUSHP' instruction is broken on these platforms, so remove
the limit to improve the efficiency.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-2-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the doubled word "has".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20200704034502.17199-2-rdunlap@infradead.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Switch driver to use MSIX mask and unmask instead of the ignore bit.
When ignore bit is cleared, we must issue an MMIO read to ensure writes
have all arrived and check and process any additional completions. The
ignore bit does not queue up any pending MSIX interrupts. The mask bit
however does. Use API call from interrupt subsystem to mask MSIX
interrupt since the hardware does not have convenient mask bit register.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159319517621.70410.11816465052708900506.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add wq drain support. When a wq is being released, it needs to wait for
all in-flight operation to complete.  A device control function
idxd_wq_drain() has been added to facilitate this. A wq drain call
is added to the char dev on release to make sure all user operations are
complete. A wq drain is also added before the wq is being disabled.

A drain command can take an unpredictable period of time. Interrupt support
for device commands is added to allow waiting on the command to
finish. If a previous command is in progress, the new submitter can block
until the current command is finished before proceeding. The interrupt
based submission will submit the command and then wait until a command
completion interrupt happens to complete. All commands are moved to the
interrupt based command submission except for the device reset during
probe, which will be polled.

Fixes: 42d279f9 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159319502515.69593.13451647706946040301.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>