Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The cpu hotplug notifiers are called without updating the core/thread
masks when a new CPU is added. This causes problems with code setting
up data structures in a cpu hotplug notifier, and relying on that later
in normal code.

This caused a crash in the new core scheduling code (SCHED_CORE),
where rq->core was set up in a notifier depending on cpu masks.

To fix this, add a cpu_setup_mask which is used in update_cpu_masks()
instead of the cpu_online_mask to determine whether the cpu masks should
be set for a certain cpu. Also move update_cpu_masks() to update the
masks before calling notify_cpu_starting() so that the notifiers are
seeing the updated masks.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Cc: <stable@vger.kernel.org>
[hca@linux.ibm.com: get rid of cpu_online_mask handling]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

current_stack_pointer() simply returns current value of %r15. If
current_stack_pointer() caller allocates stack (which is the case in
unwind code) %r15 points to a stack frame allocated for callees, meaning
current_stack_pointer() caller (e.g. stack_trace_save) will end up in
the stacktrace. This is not expected by stack_trace_save*() callers and
causes problems.

current_frame_address() on the other hand returns function stack frame
address, which matches %r15 upon function invocation. Using it in
get_stack_pointer() makes it more aligned with x86 implementation
(according to BACKTRACE_SELF_TEST output) and meets stack_trace_save*()
caller's expectations, notably KCSAN.

Also make sure unwind_start is always inlined.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/patch.git-04dd26be3043.your-ad-here.call-01630504868-ext-6188@work.hoursSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Make the oklabel within the CHKSTG macro local. This makes sure that
tools like objdump and the crash debugging tool still disassemble full
functions where the macro has been used instead of stopping half way
where such a global label is used and one has to guess how to
disassemble the rest of such a function:

E.g.:

0000000000cb0270 <mcck_int_handler>:
  cb0270:       b2 05 03 20             stck    800
  ...
  cb0354:       a7 74 00 97             jne     cb0482 <oklabel270+0xe2>

0000000000cb0358 <oklabel243>:
  cb0358:       c0 e0 00 22 4e 8f       larl    %r14,10fa076 <opcode+0x2558>
  ...

Fixes: d35925b3 ("s390/mcck: move storage error checks to assembler")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

kmemleak with enabled auto scanning reports that our stack allocation is
lost. This is because we're saving the pointer + STACK_INIT_OFFSET to
lowcore. When kmemleak now scans the objects, it thinks that this one is
lost because it can't find a corresponding pointer.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The devices owned by the parent-driver (css) was getting unregistered
from the io-subchannel driver is clearly a layering violation.
Remove the subchannel unregistration from the child-drivers.

This also means, if the device connected to the subchannel is not
operational, or not accessible, the subchannel will not be unregistered.
Instead the CIO layer will allow valid subchannels without any operational
devices in sysfs. And the userspace tooling might need to be modified to
optimally handle this new situation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull s390 updates from Heiko Carstens:

 - Improve ftrace code patching so that stop_machine is not required
   anymore. This requires a small common code patch acked by Steven
   Rostedt:

     https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/

 - Enable KCSAN for s390. This comes with a small common code change to
   fix a compile warning. Acked by Marco Elver:

     https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com

 - Add KFENCE support for s390. This also comes with a minimal x86 patch
   from Marco Elver who said also this can be carried via the s390 tree:

     https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/

 - More changes to prepare the decompressor for relocation.

 - Enable DAT also for CPU restart path.

 - Final set of register asm removal patches; leaving only three
   locations where needed and sane.

 - Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO
   support to hwcaps flags.

 - Cleanup hwcaps implementation.

 - Add new instructions to in-kernel disassembler.

 - Various QDIO cleanups.

 - Add SCLP debug feature.

 - Various other cleanups and improvements all over the place.

* tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits)
  s390: remove SCHED_CORE from defconfigs
  s390/smp: do not use nodat_stack for secondary CPU start
  s390/smp: enable DAT before CPU restart callback is called
  s390: update defconfigs
  s390/ap: fix state machine hang after failure to enable irq
  KVM: s390: generate kvm hypercall functions
  s390/sclp: add tracing of SCLP interactions
  s390/debug: add early tracing support
  s390/debug: fix debug area life cycle
  s390/debug: keep debug data on resize
  s390/diag: make restart_part2 a local label
  s390/mm,pageattr: fix walk_pte_level() early exit
  s390: fix typo in linker script
  s390: remove do_signal() prototype and do_notify_resume() function
  s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c
  s390/pci: improve DMA translation init and exit
  s390/pci: simplify CLP List PCI handling
  s390/pci: handle FH state mismatch only on disable
  s390/pci: fix misleading rc in clp_set_pci_fn()
  s390/boot: factor out offset_vmlinux_info() function
  ...

Pull m68k updates from Geert Uytterhoeven:

 - miscellaneous fixes

 - defconfig updates

* tag 'm68k-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix asm register constraints for atomic ops
  m68k: Fix invalid RMW_INSNS on CPUs that lack CAS
  m68k: defconfig: Update defconfigs for v5.14-rc1
  m68k: emu: Fix invalid free in nfeth_cleanup()

Pull crypto updates from Herbert Xu:
 "Algorithms:

   - Add AES-NI/AVX/x86_64 implementation of SM4.

  Drivers:

   - Add Arm SMCCC TRNG based driver"

[ And obviously a lot of random fixes and updates  - Linus]

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (84 commits)
  crypto: sha512 - remove imaginary and mystifying clearing of variables
  crypto: aesni - xts_crypt() return if walk.nbytes is 0
  padata: Remove repeated verbose license text
  crypto: ccp - Add support for new CCP/PSP device ID
  crypto: x86/sm4 - add AES-NI/AVX2/x86_64 implementation
  crypto: x86/sm4 - export reusable AESNI/AVX functions
  crypto: rmd320 - remove rmd320 in Makefile
  crypto: skcipher - in_irq() cleanup
  crypto: hisilicon - check _PS0 and _PR0 method
  crypto: hisilicon - change parameter passing of debugfs function
  crypto: hisilicon - support runtime PM for accelerator device
  crypto: hisilicon - add runtime PM ops
  crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'
  crypto: tcrypt - add GCM/CCM mode test for SM4 algorithm
  crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm
  crypto: tcrypt - Fix missing return value check
  crypto: hisilicon/sec - modify the hardware endian configuration
  crypto: hisilicon/sec - fix the abnormal exiting process
  crypto: qat - store vf.compatible flag
  crypto: qat - do not export adf_iov_putmsg()
  ...

Merge branch 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:
 "RCU changes for this cycle were:

   - Documentation updates

   - Miscellaneous fixes

   - Offloaded-callbacks updates

   - Updates to the nolibc library

   - Tasks-RCU updates

   - In-kernel torture-test updates

   - Torture-test scripting, perhaps most notably the pinning of
     torture-test guest OSes so as to force differences in memory
     latency. For example, in a two-socket system, a four-CPU guest OS
     will have one pair of its CPUs pinned to threads in a single core
     on one socket and the other pair pinned to threads in a single core
     on the other socket. This approach proved able to force race
     conditions that earlier testing missed. Some of these race
     conditions are still being tracked down"

* 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
  torture: Replace deprecated CPU-hotplug functions.
  rcu: Replace deprecated CPU-hotplug functions
  rcu: Print human-readable message for schedule() in RCU reader
  rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU
  rcu: Use per_cpu_ptr to get the pointer of per_cpu variable
  rcu: Remove useless "ret" update in rcu_gp_fqs_loop()
  rcu: Mark accesses in tree_stall.h
  rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack
  rcu: Mark lockless ->qsmask read in rcu_check_boost_fail()
  srcutiny: Mark read-side data races
  rcu: Start timing stall repetitions after warning complete
  rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()
  rcu/tree: Handle VM stoppage in stall detection
  rculist: Unify documentation about missing list_empty_rcu()
  rcu: Mark accesses to ->rcu_read_lock_nesting
  rcu: Weaken ->dynticks accesses and updates
  rcu: Remove special bit at the bottom of the ->dynticks counter
  rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
  rcu: Fix to include first blocked task in stall warning
  torture: Make kvm-test-1-run-qemu.sh check for reboot loops
  ...

Pull file locking updates from Jeff Layton:
 "This starts with a couple of fixes for potential deadlocks in the
  fowner/fasync handling.

  The next patch removes the old mandatory locking code from the kernel
  altogether.

  The last patch cleans up rw_verify_area a bit more after the mandatory
  locking removal"

* tag 'locks-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: clean up after mandatory file locking support removal
  fs: remove mandatory file locking support
  fcntl: fix potential deadlock for &fasync_struct.fa_lock
  fcntl: fix potential deadlocks for &fown_struct.lock

Pull tpm driver updates from Jarkko Sakkinen:
 "The highlights are:

   - Support for signing LKM's with ECDSA keys

   - An integer overflow bug fix in pkey"

* tag 'tpmdd-next-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  crypto: public_key: fix overflow during implicit conversion
  tpm: ibmvtpm: Avoid error message when process gets signal while waiting
  certs: Add support for using elliptic curve keys for signing modules
  certs: Trigger creation of RSA module signing key if it's not an RSA key
  char: tpm: cr50_i2c: convert to new probe interface
  char: tpm: Kconfig: remove bad i2c cr50 select

Pull power supply and reset updates from Sebastian Reichel:
 "Battery/charger related:
   - cros-peripheral-charger: new driver
   - mt6360-charger: new driver
   - simple-battery: support reading chemistry info
   - max17042-battery: add max77849 support
   - sbs-battery: add time_to_empty_now support
   - smb347-charger: prepare USB OTG support
   - rn5t618: add voltage_now support
   - axp288: cleanup & optimizations
   - max17042_battery: cleanups
   - ab8500: cleanups
   - misc minor cleanups and DT binding fixes

  reset related:
   - tps65086-restart: new driver
   - linkstation-poweroff: support NETGEAR ReadyNAS Duo v2"

* tag 'for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits)
  power: supply: core: Fix parsing of battery chemistry/technology
  power: supply: max17042_battery: log SOC threshold using debug log level
  power: supply: max17042_battery: more robust chip type checks
  power: supply: max17042_battery: fix typo in MAx17042_TOFF
  power: supply: max17042_battery: clean up MAX17055_V_empty
  power: supply: smb347-charger: Implement USB VBUS regulator
  power: supply: smb347-charger: Add missing pin control activation
  power: supply: smb347-charger: Utilize generic regmap caching
  power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
  dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator
  power: reset: Add TPS65086 restart driver
  dt-bindings: power: supply: max17042: describe interrupt
  power: supply: max17042: remove duplicated STATUS bit defines
  power: supply: max17042: handle fails of reading status register
  power: supply: core: Parse battery chemistry/technology
  dt-bindings: power: Extend battery bindings with chemistry
  power: reset: linkstation-poweroff: add new device
  power: reset: linkstation-poweroff: prepare for new devices
  power: supply: bq24735: reorganize ChargeOption command macros
  power: supply: rn5t618: Add voltage_now property
  ...

Pull spi updates from Mark Brown:
 "A quiet release for SPI, some fixes and a couple of new drivers plus
  one small refactoring:

   - Move the chip select timing configuration from the controller to
     the device to allow a bit more flexibility

   - New drivers for Rockchip SFC and Spreadtrum ADI"

* tag 'spi-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
  spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
  spi: add sprd ADI for sc9863 and ums512
  spi: Convert sprd ADI bindings to yaml
  spi: sprd: Add ADI r3 support
  spi: sprd: Fix the wrong WDG_LOAD_VAL
  spi: davinci: invoke chipselect callback
  spi: sprd: fill offset only to RD_CMD register for reading from slave device
  spi: sprd: Make sure offset not equal to slave address size
  spi: sprd: Pass offset instead of physical address to adi_read/_write()
  spi: rockchip-sfc: Fix assigned but never used return error codes
  spi: rockchip-sfc: Remove redundant IO operations
  spi: stm32: fix excluded_middle.cocci warnings
  spi: coldfire-qspi: Use clk_disable_unprepare in the remove function
  spi: tegra20-slink: remove spi_master_put() in tegra_slink_remove()
  spi: rockchip-sfc: add rockchip serial flash controller
  spi: rockchip-sfc: Bindings for Rockchip serial flash controller
  spi: orion: Prevent incorrect chip select behaviour
  spi: mxic: add missing braces
  spi: spi-pic32: Fix issue with uninitialized dma_slave_config
  spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
  ...

Pull regulator updates from Mark Brown:
 "A very quiet releases, some fixes and cleanups but not really that
  many of them. There were a couple of new driver specific pieces:

   - Support for controlling the over/under voltage protection on
     BD718xx devices

   - New drivers for Richtek RTQ2134, and RTQ6752"

* tag 'regulator-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (37 commits)
  regulator: vctrl: Avoid lockdep warning in enable/disable ops
  regulator: vctrl: Use locked regulator_get_voltage in probe path
  regulator: Documentation fix for regulator error notification helper
  regulator: Minor regulator documentation fixes.
  regulator: sy7636a: Use the regmap directly
  regulator: sy7636a: Store the epd-pwr-good GPIO locally
  regulator: sy7636a: Use the parent driver data
  regulator: sy7636a: Remove the poll_enable_time
  regulator: sy8827n: Enable REGCACHE_FLAT
  regulator: sy8824x: Enable REGCACHE_FLAT
  regulator: rtq2134: Fix coding style
  regulator: hi6421v600: rename voltage range arrays
  regulator: hi6421v600: use lowercase for ldo
  regulator: fixed: use dev_err_probe for register
  regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC
  regulator: rtq2134: Add binding document for Richtek RTQ2134 SubPMIC
  regulator: Fix a couple of spelling mistakes in Kconfig
  regulator: rtq6752: fix reg reset behavior
  regulator: da9063: Add support for full-current mode.
  regulator: rt6245: make a const array func_base static, makes object smaller
  ...

Pull regmap updates from Mark Brown:
 "A few small fixes for regmaps this time, plus support for allowing
  drivers to select raw spinlocks for the locks in order to allow usage
  in interrutpt controllers"

* tag 'regmap-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: teach regmap to use raw spinlocks if requested in the config
  regmap: allow const array for {devm_,}regmap_field_bulk_alloc reg_fields
  regmap: Prefer unsigned int to bare use of unsigned
  regmap: fix the offset of register error log

Pull fs hole punching vs cache filling race fixes from Jan Kara:
 "Fix races leading to possible data corruption or stale data exposure
  in multiple filesystems when hole punching races with operations such
  as readahead.

  This is the series I was sending for the last merge window but with
  your objection fixed - now filemap_fault() has been modified to take
  invalidate_lock only when we need to create new page in the page cache
  and / or bring it uptodate"

* tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  filesystems/locking: fix Malformed table warning
  cifs: Fix race between hole punch and page fault
  ceph: Fix race between hole punch and page fault
  fuse: Convert to using invalidate_lock
  f2fs: Convert to using invalidate_lock
  zonefs: Convert to using invalidate_lock
  xfs: Convert double locking of MMAPLOCK to use VFS helpers
  xfs: Convert to use invalidate_lock
  xfs: Refactor xfs_isilocked()
  ext2: Convert to using invalidate_lock
  ext4: Convert to use mapping->invalidate_lock
  mm: Add functions to lock invalidate_lock for two mappings
  mm: Protect operations adding pages to page cache with invalidate_lock
  documentation: Sync file_operations members with reality
  mm: Fix comments mentioning i_mutex

Pull UDF and isofs updates from Jan Kara:
 "Several smaller fixes and cleanups in UDF and isofs"

* tag 'fs_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf_get_extendedattr() had no boundary checks.
  isofs: joliet: Fix iocharset=utf8 mount option
  udf: Fix iocharset=utf8 mount option
  udf: Get rid of 0-length arrays in struct fileIdentDesc
  udf: Get rid of 0-length arrays
  udf: Remove unused declaration
  udf: Check LVID earlier

Pull FIEMAP cleanups from Jan Kara:
 "FIEMAP cleanups from Christoph transitioning all remaining filesystems
  supporting FIEMAP (ext2, hpfs) to iomap API and removing the old
  helper"

* tag 'fiemap_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fs: remove generic_block_fiemap
  hpfs: use iomap_fiemap to implement ->fiemap
  ext2: use iomap_fiemap to implement ->fiemap
  ext2: make ext2_iomap_ops available unconditionally

Pull fsnotify updates from Jan Kara:
 "fsnotify speedups when notification actually isn't used and support
  for identifying processes which caused fanotify events through pidfd
  instead of normal pid"

* tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: optimize the case of no marks of any type
  fsnotify: count all objects with attached connectors
  fsnotify: count s_fsnotify_inode_refs for attached connectors
  fsnotify: replace igrab() with ihold() on attach connector
  fanotify: add pidfd support to the fanotify API
  fanotify: introduce a generic info record copying helper
  fanotify: minor cosmetic adjustments to fid labels
  kernel/pid.c: implement additional checks upon pidfd_create() parameters
  kernel/pid.c: remove static qualifier from pidfd_create()

As per the long-suffering comment.
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Linux console's VT102 implementation already consumes OSC
("Operating System Command") sequences, probably because that's how
palette changes are transmitted.

In addition to OSC, there are three other major clases of ANSI control
strings: APC ("Application Program Command"), PM ("Privacy Message"),
and DCS ("Device Control String").  They are handled similarly to OSC in
terms of termination.

Source: vt100.net

Add three new enumerated states, one for each of these types.  All three
are handled the same way right now--they simply consume input until
terminated.  I hope to expand upon this firmament in the future.  Add
new predicate ansi_control_string(), returning true for any of these
states.  Replace explicit checks against ESosc with calls to this
function.  Transition to these states appropriately from the escape
initiation (ESesc) state.

This was motivated by the following Notcurses bugs:

 https://github.com/dankamongmen/notcurses/issues/2050
 https://github.com/dankamongmen/notcurses/issues/1828
 https://github.com/dankamongmen/notcurses/issues/2069

where standard VT sequences are not consumed by the Linux console.  It's
not necessary that the Linux console *support* these sequences, but it
ought *consume* these well-specified classes of sequences.

Tested by sending a variety of escape sequences to the console, and
verifying that they still worked, or were now properly consumed.
Verified that the escapes were properly terminated at a generic level.
Verified that the Notcurses tools continued to show expected output on
the Linux console, except now without escape bleedthrough.

Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/Signed-off-by: nick black <dankamongmen@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This just does the "if the architecture does efficient unaligned
handling, start the memcmp using 'unsigned long' accesses", since
Nikolay Borisov found a load that cares.

This is basically the minimal patch, and limited to architectures that
are known to not have slow unaligned handling.  We've had the stupid
byte-at-a-time version forever, and nobody has ever even noticed before,
so let's keep the fix minimal.

A potential further improvement would be to align one of the sources in
order to at least minimize unaligned cases, but the only real case of
bigger memcmp() users seems to be the FIDEDUPERANGE ioctl().  As David
Sterba says, the dedupe ioctl is typically called on ranges spanning
many pages so the common case will all be page-aligned anyway.

All the relevant architectures select HAVE_EFFICIENT_UNALIGNED_ACCESS,
so I'm not going to worry about the combination of a very rare use-case
and a rare architecture until somebody actually hits it.  Particularly
since Nikolay also tested the more complex patch with extra alignment
handling code, and it only added overhead.

Link: https://lore.kernel.org/lkml/20210721135926.602840-1-nborisov@suse.com/Reported-by: Nikolay Borisov <nborisov@suse.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This causes too many problems. Enable it again when everything has
been sorted out.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull clk fix from Stephen Boyd:
 "One hotfix for a NULL pointer deref in the Renesas usb clk driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference

Pull scheduler fixes from Borislav Petkov:

 - Have get_push_task() check whether current has migration disabled and
   thus avoid useless invocations of the migration thread

 - Rework initialization flow so that all rq->core's are initialized,
   even of CPUs which have not been onlined yet, so that iterating over
   them all works as expected

* tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix get_push_task() vs migrate_disable()
  sched: Fix Core-wide rq->lock for uninitialized CPUs

Pull irq fix from Borislav Petkov:

 - Have msix_mask_all() check a global control which says whether MSI-X
   masking should be done and thus make it usable on Xen-PV too

* tag 'irq_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Skip masking MSI-X on Xen PV

Pull perf fixes from Borislav Petkov:

 - Prevent the amd/power module from being removed while in use

 - Mark AMD IBS as not supporting content exclusion

 - Add a workaround for AMD erratum #1197 where IBS registers might not
   be restored properly after exiting CC6 state

 - Fix a potential truncation of a 32-bit variable due to shifting

 - Read the correct bits describing the number of configurable address
   ranges on Intel PT

* tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/power: Assign pmu.module
  perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op
  perf/x86/amd/ibs: Work around erratum #1197
  perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32
  perf/x86/intel/pt: Fix mask of num_address_ranges

Pull x86 fixes from Borislav Petkov:

 - Fix build error on RHEL where -Werror=maybe-uninitialized is set.

 - Restore the firmware's IDT when calling EFI boot services and before
   ExitBootServices() has been called. This fixes a boot failure on what
   appears to be a tablet with 32-bit UEFI running a 64-bit kernel.

* tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix a maybe-uninitialized build warning treated as error
  x86/efi: Restore Firmware IDT before calling ExitBootServices()

This reverts commit 83af58f8.

It turns out that at least the assembly implementation for strncpy() was
buggy.  Revert the whole commit and return back to the default coding.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The probe was manually passing NULL instead of dev to devm_clk_hw_register.
This caused a Unable to handle kernel NULL pointer dereference error.
Fix this by passing 'dev'.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: a20a40a8 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull SCSI fix from James Bottomley:
 "A single fix for a race introduced by a fix that went into 5.14-rc5"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Fix hang of freezing queue between blocking and running device

Pull USB fixes from Greg KH:
 "Here are a few tiny USB fixes for reported issues with some USB
  drivers.

  These fixes include:

   - gadget driver fixes for regressions

   - tcpm driver fix

   - dwc3 driver fixes

   - xhci renesas firmware loading fix, again.

   - usb serial option driver device id addition

   - usb serial ch341 revert for regression

  All all of these have been in linux-next with no reported problems"

* tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: u_audio: fix race condition on endpoint stop
  usb: gadget: f_uac2: fixup feedback endpoint stop
  usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running
  usb: renesas-xhci: Prefer firmware loading on unknown ROM state
  usb: dwc3: gadget: Stop EP0 transfers during pullup disable
  usb: dwc3: gadget: Fix dwc3_calc_trbs_left()
  Revert "USB: serial: ch341: fix character loss at high transfer rates"
  USB: serial: option: add new VID/PID to support Fibocom FG150

Pull powerpc fixes from Michael Ellerman:

 - Fix scv implicit soft-mask table for relocated (eg. kdump) kernels

 - Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCK, which was disabled due to a
   typo

Thanks to Lukas Bulwahn, Nicholas Piggin, and Daniel Axtens.

* tag 'powerpc-5.14-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix scv implicit soft-mask table for relocated kernels
  powerpc: Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCK

Pull block fixes from Jens Axboe:

 - Revert the mq-deadline priority handling, it's causing serious
   performance regressions. While experimental patches exists to fix
   this up, it's too late to do so now. Revert it and re-do it properly
   for 5.15 instead.

 - Fix a NULL vs IS_ERR() regression in this release (Dan)

 - Fix a mq-deadline accounting regression in this release (Bart)

 - Mark cryptoloop as deprecated. It's broken and dm-crypt fully
   supports it, and it's actively intefering with loop. Plan on removal
   for 5.16 (Christoph)

* tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block:
  cryptoloop: add a deprecation warning
  pd: fix a NULL vs IS_ERR() check
  Revert "block/mq-deadline: Prioritize high-priority requests"
  mq-deadline: Fix request accounting

Pull ARM SoC fixes from Arnd Bergmann:
 "Just two trivial fixes from the reset driver tree, nothing else came
  up since the last soc fixes"

* tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  reset: reset-zynqmp: Fixed the argument data type
  reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5

Pull ACPI fix from Rafael Wysocki:
 "Fix a regression introduced during this cycle that has been partially
  addressed by an earlier commit (Andy Shevchenko)"

* tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()

Pull power management fixes from Rafael Wysocki:
 "These fix two issues introduced during this cycle, one of which is a
  regression and the other one affects new code.

  Specifics:

   - Prevent the operating performance points (OPP) code from crashing
     when some entries in the table of required OPPs are set to error
     pointer values (Marijn Suijten)

   - Prevent the generic power domains (genpd) framework from
     incorrectly overriding the performance state of a device set by its
     driver while it is runtime-suspended or when runtime PM of it is
     disabled (Dmitry Osipenko)"

* tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: domains: Improve runtime PM performance state handling
  opp: core: Check for pending links before reading required_opp pointers