- 10 Jan, 2018 2 commits
-
-
Marcelo Ricardo Leitner authored
So replace it with GFP_USER and also add __GFP_NOWARN. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Prevent out-of-bounds speculation in BPF maps by masking the index after bounds checks in order to fix spectre v1, and add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for removing the BPF interpreter from the kernel in favor of JIT-only mode to make spectre v2 harder, from Alexei. 2) Remove false sharing of map refcount with max_entries which was used in spectre v1, from Daniel. 3) Add a missing NULL psock check in sockmap in order to fix a race, from John. 4) Fix test_align BPF selftest case since a recent change in verifier rejects the bit-wise arithmetic on pointers earlier but test_align update was missing, from Alexei. ==================== Signed-off-by:
-
- 09 Jan, 2018 12 commits
-
-
Alexei Starovoitov authored
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Daniel Borkmann authored
In addition to commit b2157399 ("bpf: prevent out-of-bounds speculation") also change the layout of struct bpf_map such that false sharing of fast-path members like max_entries is avoided when the maps reference counter is altered. Therefore enforce them to be placed into separate cachelines. pahole dump after change: struct bpf_map { const struct bpf_map_ops * ops; /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ u32 pages; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ bool unpriv_array; /* 56 1 */ /* XXX 7 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct user_struct * user; /* 64 8 */ atomic_t refcnt; /* 72 4 */ atomic_t usercnt; /* 76 4 */ struct work_struct work; /* 80 32 */ char name[16]; /* 112 16 */ /* --- cacheline 2 boundary (128 bytes) --- */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 121, holes: 1, sum holes: 7 */ }; Now all entries in the first cacheline are read only throughout the life time of the map, set up once during map creation. Overall struct size and number of cachelines doesn't change from the reordering. struct bpf_map is usually first member and embedded in map structs in specific map implementations, so also avoid those members to sit at the end where it could potentially share the cacheline with first map values e.g. in the array since remote CPUs could trigger map updates just as well for those (easily dirtying members like max_entries intentionally as well) while having subsequent values in cache. Quoting from Google's Project Zero blog [1]: Additionally, at least on the Intel machine on which this was tested, bouncing modified cache lines between cores is slow, apparently because the MESI protocol is used for cache coherence [8]. Changing the reference counter of an eBPF array on one physical CPU core causes the cache line containing the reference counter to be bounced over to that CPU core, making reads of the reference counter on all other CPU cores slow until the changed reference counter has been written back to memory. Because the length and the reference counter of an eBPF array are stored in the same cache line, this also means that changing the reference counter on one physical CPU core causes reads of the eBPF array's length to be slow on other physical CPU cores (intentional false sharing). While this doesn't 'control' the out-of-bounds speculation through masking the index as in commit b2157399, triggering a manipulation of the map's reference counter is really trivial, so lets not allow to easily affect max_entries from it. Splitting to separate cachelines also generally makes sense from a performance perspective anyway in that fast-path won't have a cache miss if the map gets pinned, reused in other progs, etc out of control path, thus also avoids unintentional false sharing. [1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.htmlSigned-off-by:
-
Wei Wang authored
In the current code, when creating a new fib6 table, tb6_root.leaf gets initialized to net->ipv6.ip6_null_entry. If a default route is being added with rt->rt6i_metric = 0xffffffff, fib6_add() will add this route after net->ipv6.ip6_null_entry. As null_entry is shared, it could cause problem. In order to fix it, set fn->leaf to NULL before calling fib6_add_rt2node() when trying to add the first default route. And reset fn->leaf to null_entry when adding fails or when deleting the last default route. syzkaller reported the following issue which is fixed by this commit: WARNING: suspicious RCU usage 4.15.0-rc5+ #171 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1702 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by swapper/0/0: #0: ((&net->ipv6.ip6_fib_timer)){+.-.}, at: [<00000000d43f631b>] lockdep_copy_map include/linux/lockdep.h:178 [inline] #0: ((&net->ipv6.ip6_fib_timer)){+.-.}, at: [<00000000d43f631b>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1310 #1: (&(&net->ipv6.fib6_gc_lock)->rlock){+.-.}, at: [<000000002ff9d65c>] spin_lock_bh include/linux/spinlock.h:315 [inline] #1: (&(&net->ipv6.fib6_gc_lock)->rlock){+.-.}, at: [<000000002ff9d65c>] fib6_run_gc+0x9d/0x3c0 net/ipv6/ip6_fib.c:2007 #2: (rcu_read_lock){....}, at: [<0000000091db762d>] __fib6_clean_all+0x0/0x3a0 net/ipv6/ip6_fib.c:1560 #3: (&(&tb->tb6_lock)->rlock){+.-.}, at: [<000000009e503581>] spin_lock_bh include/linux/spinlock.h:315 [inline] #3: (&(&tb->tb6_lock)->rlock){+.-.}, at: [<000000009e503581>] __fib6_clean_all+0x1d0/0x3a0 net/ipv6/ip6_fib.c:1948 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc5+ #171 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4585 fib6_del+0xcaa/0x11b0 net/ipv6/ip6_fib.c:1701 fib6_clean_node+0x3aa/0x4f0 net/ipv6/ip6_fib.c:1892 fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1815 fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1863 fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1933 __fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1949 fib6_clean_all net/ipv6/ip6_fib.c:1960 [inline] fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2016 fib6_gc_timer_cb+0x20/0x30 net/ipv6/ip6_fib.c:2033 call_timer_fn+0x228/0x820 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:904 </IRQ> Reported-by:syzbot <syzkaller@googlegroups.com> Fixes: 66f5d6ce ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== Ether fixes for the SolutionEngine771x boards Here's the series of 2 patches against Linus' repo. This series should (hoplefully) fix the Ether support on the SolutionEngine771x boards... [1/2] SolutionEngine771x: fix Ether platform data [2/2] SolutionEngine771x: add Ether TSU resource ==================== Signed-off-by: -
Sergei Shtylyov authored
After the Ether platform data is fixed, the driver probe() method would still fail since the 'struct sh_eth_cpu_data' corresponding to SH771x indicates the presence of TSU but the memory resource for it is absent. Add the missing TSU resource to both Ether devices and fix the harmless off-by-one error in the main memory resources, while at it... Fixes: 4986b996 ("net: sh_eth: remove the SH_TSU_ADDR") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710 board and crash on SolutionEngine7712 board as the platform code is hopelessly behind the driver's platform data -- it passes the PHY address instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in order to fix the bug... Fixes: 71557a37 ("[netdrvr] sh_eth: Add SH7619 support") Signed-off-by:
-
Mike Rapoport authored
Fix the following 'make htmldocs' complaint: Documentation/networking/msg_zerocopy.rst:: WARNING: document isn't included in any toctree. Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
-
Nicolai Stange authored
Commit 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") fixed the issue of possibly inconsistent ->hdrincl handling due to concurrent updates by reading this bit-field member into a local variable and using the thus stabilized value in subsequent tests. However, aforementioned commit also adds the (correct) comment that /* hdrincl should be READ_ONCE(inet->hdrincl) * but READ_ONCE() doesn't work with bit fields */ because as it stands, the compiler is free to shortcut or even eliminate the local variable at its will. Note that I have not seen anything like this happening in reality and thus, the concern is a theoretical one. However, in order to be on the safe side, emulate a READ_ONCE() on the bit-field by doing it on the local 'hdrincl' variable itself: int hdrincl = inet->hdrincl; hdrincl = READ_ONCE(hdrincl); This breaks the chain in the sense that the compiler is not allowed to replace subsequent reads from hdrincl with reloads from inet->hdrincl. Fixes: 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") Signed-off-by:
Nicolai Stange <nstange@suse.de> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Xiongfeng Wang authored
gcc-8 reports net/caif/caif_dev.c: In function 'caif_enroll_dev': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] net/caif/cfctrl.c: In function 'cfctrl_linkup_request': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] net/caif/cfcnfg.c: In function 'caif_connect_client': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] The compiler require that the input param 'len' of strncpy() should be greater than the length of the src string, so that '\0' is copied as well. We can just use strlcpy() to avoid this warning. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by:
-
Andrii Vladyka authored
Use AF_INET6 instead of AF_INET in IPv6-related code path Signed-off-by:
Andrii Vladyka <tulup@mail.ru> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and Alexander Duyck. 2) Undo unintentional UAPI change in netfilter conntrack, from Florian Westphal. 3) Revert a change to how error codes are returned from dev_get_valid_name(), it broke some apps. 4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6 dual-stack. From Eli Cooper. 5) Fix missed PMTU updates in geneve, from Xin Long. 6) Cure double free in macvlan, from Gao Feng. 7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from Mohamed Ghannam. 8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed deferral of probe when the regulator is not ready yet). 9) Missing DMA mapping error checks in 3c59x, from Neil Horman. 10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli. 11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB() isn't initialized. From Andrei Vagin. 12) Fix crashes in fib6_add(), from Wei Wang. 13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) sh_eth: fix TXALCR1 offsets mdio-sun4i: Fix a memory leak phylink: mark expected switch fall-throughs in phylink_mii_ioctl sctp: fix the handling of ICMP Frag Needed for too small MTUs sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled xen-netfront: enable device after manual module load bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc() sh_eth: fix SH7757 GEther initialization net: fec: free/restore resource in related probe error pathes uapi/if_ether.h: prevent redefinition of struct ethhdr ipv6: fix general protection fault in fib6_add() RDS: null pointer dereference in rds_atomic_free_op sh_eth: fix TSU resource handling net: stmmac: enable EEE in MII, GMII or RGMII only rtnetlink: give a user socket to get_target_net() MAINTAINERS: Update my email address. can: ems_usb: improve error reporting for error warning and error passive can: flex_can: Correct the checking for frame length in flexcan_start_xmit() can: gs_usb: fix return value of the "set_bittiming" callback ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: - One line fix to mlx4 error flow (same as mlx5 fix in last pull request, just in the mlx4 driver) - Fix a race condition in the IPoIB driver. This patch is larger than just a one line fix, but resolves a race condition in a fairly straight forward manner - Fix a locking issue in the RDMA netlink code. This patch is also larger than I would like for a late -rc. It has, however, had a week to bake in the rdma tree prior to this pull request - One line fix to fix granting remote machine access to memory that they don't need and shouldn't have - One line fix to correct the fact that our sgid/dgid pair is swapped from what you would expect when receiving an incoming connection request * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/srpt: Fix ACL lookup during login IB/srpt: Disable RDMA access by the initiator RDMA/netlink: Fix locking around __ib_get_device_by_index IB/ipoib: Fix race condition in neigh creation IB/mlx4: Fix mlx4_ib_alloc_mr error flow
-
- 08 Jan, 2018 14 commits
-
-
Alexei Starovoitov authored
Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by:John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fix from Darren Hart: "Address a wmi initcall ordering race resulting in a difficult to reproduce boot failure" * tag 'platform-drivers-x86-v4.15-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: wmi: Call acpi_wmi_init() later
-
Sergei Shtylyov authored
The TXALCR1 offsets are incorrect in the register offset tables, most probably due to copy&paste error. Luckily, the driver never uses this register. :-) Fixes: 4a55530f ("net: sh_eth: modify the definitions of register") Signed-off-by:
-
Christophe JAILLET authored
If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1463447 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== SCTP PMTU discovery fixes This patchset fixes 2 issues with PMTU discovery that can lead to flood of retransmissions. The first patch fixes the issue for when PMTUD is disabled by the application, while the second fixes it for when its enabled. Please consider these to stable. ==================== Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
syzbot reported a hang involving SCTP, on which it kept flooding dmesg with the message: [ 246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too low, using default minimum of 512 That happened because whenever SCTP hits an ICMP Frag Needed, it tries to adjust to the new MTU and triggers an immediate retransmission. But it didn't consider the fact that MTUs smaller than the SCTP minimum MTU allowed (512) would not cause the PMTU to change, and issued the retransmission anyway (thus leading to another ICMP Frag Needed, and so on). As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU are higher than that, sctp_transport_update_pmtu() is changed to re-fetch the PMTU that got set after our request, and with that, detect if there was an actual change or not. The fix, thus, skips the immediate retransmission if the received ICMP resulted in no change, in the hope that SCTP will select another path. Note: The value being used for the minimum MTU (512, SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576, SCTP_MIN_PMTU), but such change belongs to another patch. Changes from v1: - do not disable PMTU discovery, in the light of commit 06ad3919 ("[SCTP] Don't disable PMTU discovery when mtu is small") and as suggested by Xin Long. - changed the way to break the rtx loop by detecting if the icmp resulted in a change or not Changes from v2: none See-also: https://lkml.org/lkml/2017/12/22/811Reported-by:
-
Marcelo Ricardo Leitner authored
Currently, if PMTU discovery is disabled on a given transport, but the configured value is higher than the actual PMTU, it is likely that we will get some icmp Frag Needed. The issue is, if PMTU discovery is disabled, we won't update the information and will issue a retransmission immediately, which may very well trigger another ICMP, and another retransmission, leading to a loop. The fix is to simply not trigger immediate retransmissions if PMTU discovery is disabled on the given transport. Changes from v2: - updated stale comment, noticed by Xin Long Signed-off-by:
-
Eduardo Otubo authored
When loading the module after unloading it, the network interface would not be enabled and thus wouldn't have a backend counterpart and unable to be used by the guest. The guest would face errors like: [root@guest ~]# ethtool -i eth0 Cannot get driver information: No such device [root@guest ~]# ifconfig eth0 eth0: error fetching interface information: Device not found This patch initializes the state of the netfront device whenever it is loaded manually, this state would communicate the netback to create its device and establish the connection between them. Signed-off-by:
Eduardo Otubo <otubo@redhat.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: 2 small bug fixes. The first one fixes the TC Flower flow parameter passed to firmware. The 2nd one fixes the VF index range checking for iproute2 SRIOV related commands. ==================== Signed-off-by: -
Venkat Duvvuru authored
In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Venkat Devvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Sunil Challa authored
flow_type in HWRM_FLOW_ALLOC is not being populated correctly due to incorrect passing of pointer and size of l3_mask argument of is_wildcard(). Fixed this. Fixes: db1d36a2 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by:
Sunil Challa <sunilkumar.challa@broadcom.com> Reviewed-by:
Sathya Perla <sathya.perla@broadcom.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "This contains fixes for the following two non-trivial issues: - The task iterator got broken while adding thread mode support for v4.14. It was less visible because it only triggers when both cgroup1 and cgroup2 hierarchies are in use. The recent versions of systemd uses cgroup2 for process management even when cgroup1 is used for resource control exposing this issue. - cpuset CPU hotplug path could deadlock when racing against exits. There also are two patches to replace unlimited strcpy() usages with strlcpy()" * 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix css_task_iter crash on CSS_TASK_ITER_PROC cgroup: Fix deadlock in cpu hotplug path cgroup: use strlcpy() instead of strscpy() to avoid spurious warning cgroup: avoid copying strings longer than the buffers -
Rafael J. Wysocki authored
Calling acpi_wmi_init() at the subsys_initcall() level causes ordering issues to appear on some systems and they are difficult to reproduce, because there is no guaranteed ordering between subsys_initcall() calls, so they may occur in different orders on different systems. In particular, commit 86d9f485 (mm/slab: fix kmemcg cache creation delayed issue) exposed one of these issues where genl_init() and acpi_wmi_init() are both called at the same initcall level, but the former must run before the latter so as to avoid a NULL pointer dereference. For this reason, move the acpi_wmi_init() invocation to the initcall_sync level which should still be early enough for things to work correctly in the WMI land. Link: https://marc.info/?t=151274596700002&r=1&w=2Reported-by:
Jonathan McDowell <noodles@earth.li> Reported-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org>
-
- 07 Jan, 2018 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Many small fixes to show the real physical addresses of devices instead of hashed addresses. - One important fix to unbreak 32-bit SMP support: We forgot to 16-byte align the spinlocks in the assembler code. - Qemu support: The host will get a chance to sleep when the parisc guest is idle. We use the same mechanism as the power architecture by overlaying the "or %r10,%r10,%r10" instruction which is simply a nop on real hardware. * 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: qemu idle sleep support parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel parisc: Show unhashed EISA EEPROM address parisc: Show unhashed HPA of Dino chip parisc: Show initial kernel memory layout unhashed parisc: Show unhashed hardware inventory
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fix from John Johansen: "This fixes a regression when the kernel feature set is reported as supporting mount and policy is pinned to a feature set that does not support mount mediation" * tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix regression in mount mediation when feature set is pinned
-
Linus Torvalds authored
Merge tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "The commit 2b83ff96 for 4.15-rc6, which was fixing LED brightness setting after clearing delay_off broke the behavior on any alteration of delay_on{off} properties, due to use of a LED core helper that does too much for this particular case" * tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: core: Fix regression caused by commit 2b83ff96
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD bugfix from Richard Weinberger: "A single fix for the pxa3xx NAND driver" * tag 'for-linus-20180107' of git://git.infradead.org/linux-mtd: mtd: nand: pxa3xx: Fix READOOB implementation
-
Jacek Anaszewski authored
Commit 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink() in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev. Cleansing of the latter ones wasn't required to fix the original issue but wasn't considered harmful. It nonetheless turned out to be so in case when pointer to one or both props is passed to led_blink_set() like in the ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or delay_off arguments to led_blink_setup(), which results either in stopping the software blinking or setting blinking frequency always to 1Hz. Avoid using led_stop_software_blink() and add a single call required to clear LED_BLINK_SW flag, which was the only needed modification to fix the original issue. Fixes 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: - untangle sys_close() abuses in xt_bpf - deal with register_shrinker() failures in sget() * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'" sget(): handle failures of register_shrinker() mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "s390: - Two fixes for potential bitmap overruns in the cmma migration code x86: - Clear guest provided GPRs to defeat the Project Zero PoC for CVE 2017-5715" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: Scrub hardware GPRs at VM-exit KVM: s390: prevent buffer overrun on memory hotplug during migration KVM: s390: fix cmma migration for multiple memory slots
-
- 06 Jan, 2018 4 commits
-
-
Alexei Starovoitov authored
since commit 82abbf8d the verifier rejects the bit-wise arithmetic on pointers earlier. The test 'dubious pointer arithmetic' now has less output to match on. Adjust it. Fixes: 82abbf8d ("bpf: do not allow root to mangle valid pointers") Reported-by:
kernel test robot <xiaolong.ye@intel.com> Signed-off-by:
-
John Fastabend authored
Add psock NULL check to handle a racing sock event that can get the sk_callback_lock before this case but after xchg happens causing the refcnt to hit zero and sock user data (psock) to be null and queued for garbage collection. Also add a comment in the code because this is a bit subtle and not obvious in my opinion. Signed-off-by:
-
Boris Brezillon authored
In the current driver, OOB bytes are accessed in raw mode, and when a page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the driver must read the whole spare area (64 bytes in case of a 2k page, 16 bytes for a 512 page). The driver was only reading the free OOB bytes, which was leaving some unread data in the FIFO and was somehow leading to a timeout. We could patch the driver to read ->spare_size + ->ecc_size instead of just ->spare_size when READOOB is requested, but we'd better make in-band and OOB accesses consistent. Since the driver is always accessing in-band data in non-raw mode (with the ECC engine enabled), we should also access OOB data in this mode. That's particularly useful when using the BCH engine because in this mode the free OOB bytes are also ECC protected. Fixes: 43bcfd2b ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support") Cc: stable@vger.kernel.org Reported-by:
Sean Nyekjær <sean.nyekjaer@prevas.dk> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a mapped region. The bug was introduced in the refactoring of the page fault handler we did in the previous release. Thanks to John Sperbeck" * tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
-
