- 08 Dec, 2017 8 commits
-
-
Calvin Owens authored
After applying 2270bc5d ("bnxt_en: Fix netpoll handling") and 903649e7 ("bnxt_en: Improve -ENOMEM logic in NAPI poll loop."), we still see the following WARN fire: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1875170 at net/core/netpoll.c:165 netpoll_poll_dev+0x15a/0x160 bnxt_poll+0x0/0xd0 exceeded budget in poll <snip> Call Trace: [<ffffffff814be5cd>] dump_stack+0x4d/0x70 [<ffffffff8107e013>] __warn+0xd3/0xf0 [<ffffffff8107e07f>] warn_slowpath_fmt+0x4f/0x60 [<ffffffff8179519a>] netpoll_poll_dev+0x15a/0x160 [<ffffffff81795f38>] netpoll_send_skb_on_dev+0x168/0x250 [<ffffffff817962fc>] netpoll_send_udp+0x2dc/0x440 [<ffffffff815fa9be>] write_ext_msg+0x20e/0x250 [<ffffffff810c8125>] call_console_drivers.constprop.23+0xa5/0x110 [<ffffffff810c9549>] console_unlock+0x339/0x5b0 [<ffffffff810c9a88>] vprintk_emit+0x2c8/0x450 [<ffffffff810c9d5f>] vprintk_default+0x1f/0x30 [<ffffffff81173df5>] printk+0x48/0x50 [<ffffffffa0197713>] edac_raw_mc_handle_error+0x563/0x5c0 [edac_core] [<ffffffffa0197b9b>] edac_mc_handle_error+0x42b/0x6e0 [edac_core] [<ffffffffa01c3a60>] sbridge_mce_output_error+0x410/0x10d0 [sb_edac] [<ffffffffa01c47cc>] sbridge_check_error+0xac/0x130 [sb_edac] [<ffffffffa0197f3c>] edac_mc_workq_function+0x3c/0x90 [edac_core] [<ffffffff81095f8b>] process_one_work+0x19b/0x480 [<ffffffff810967ca>] worker_thread+0x6a/0x520 [<ffffffff8109c7c4>] kthread+0xe4/0x100 [<ffffffff81884c52>] ret_from_fork+0x22/0x40 This happens because we increment rx_pkts on -ENOMEM and -EIO, resulting in rx_pkts > 0. Fix this by only bumping rx_pkts if we were actually given a non-zero budget. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Neal Cardwell says: ==================== TCP BBR sampling fixes for loss recovery undo This patch series has a few minor bug fixes for cases where spurious loss recoveries can trick BBR estimators into estimating that the available bandwidth is much lower than the true available bandwidth. In both cases the fix here is to just reset the estimator upon loss recovery undo. ==================== Signed-off-by: -
Neal Cardwell authored
Fix BBR so that upon notification of a loss recovery undo BBR resets long-term bandwidth sampling. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this can cause BBR to spuriously estimate that we are seeing loss rates high enough to trigger long-term bandwidth estimation. To avoid that problem, this commit resets long-term bandwidth sampling on loss recovery undo events. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Neal Cardwell authored
Fix BBR so that upon notification of a loss recovery undo BBR resets the full pipe detection (STARTUP exit) state machine. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this could previously cause BBR to spuriously estimate that the pipe is full. Since spurious loss recovery means that our overall sending will have slowed down spuriously, this commit gives a flow more time to probe robustly for bandwidth and decide the pipe is really full. Signed-off-by:
-
Neal Cardwell authored
This commit records the "full bw reached" decision in a new full_bw_reached bit. This is a pure refactor that does not change the current behavior, but enables subsequent fixes and improvements. In particular, this enables simple and clean fixes because the full_bw and full_bw_cnt can be unconditionally zeroed without worrying about forgetting that we estimated we filled the pipe in Startup. And it enables future improvements because multiple code paths can be used for estimating that we filled the pipe in Startup; any new code paths only need to set this bit when they think the pipe is full. Note that this fix intentionally reduces the width of the full_bw_cnt counter, since we have never used the most significant bit. Signed-off-by:
-
Bert Kenward authored
The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers cannot be NULL. Add a paranoid warning to check this condition and fix the one case where they were NULL. efx_enqueue_unwind() is called very rarely, during error handling. Without this fix it would fail with a NULL pointer dereference in efx_dequeue_buffer, with efx_enqueue_skb in the call stack. Fixes: e9117e50 ("sfc: Firmware-Assisted TSO version 2") Reported-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Tested-by:
-
Claudiu Manoil authored
This controller does not support EEE, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that gianfar connects to, to prevent the above unwanted outcome. Signed-off-by:
Shaohui Xie <Shaohui.Xie@nxp.com> Tested-by:
Yangbo Lu <Yangbo.lu@nxp.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Yousuk Seung authored
Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820 ("tcp: track data delivery rate for a TCP connection") Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
-
- 07 Dec, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-06 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fixing broken uapi for BPF tracing programs for s390 and arm64 architectures due to pt_regs being in-kernel only, and not part of uapi right now. A wrapper is added that exports pt_regs in an asm-generic way. For arm64 this maps to existing user_pt_regs structure and for s390 a user_pt_regs structure exporting the beginning of pt_regs is added and uapi-exported, thus fixing the BPF issues seen in perf (and BPF selftests), all from Hendrik. ==================== Signed-off-by: -
Bjørn Mork authored
The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf6 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by:
Jay Foster <jay@systech.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
When I switched rcv_rtt_est to high resolution timestamps, I forgot that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust() Using an old timestamp leads to autotuning lags. Fixes: 645f4c6f ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps") Signed-off-by:
-
David Ahern authored
Commit 28033ae4 ("net: netlink: Update attr validation to require exact length for some types") requires attributes using types NLA_U* and NLA_S* to have an exact length. This change is exposing bugs in various userspace commands that are sending attributes with an invalid length (e.g., attribute has type NLA_U8 and userspace sends NLA_U32). While the commands are clearly broken and need to be fixed, users are arguing that the sudden change in enforcement is breaking older commands on newer kernels for use cases that otherwise "worked". Relax the validation to print a warning mesage similar to what is done for messages containing extra bytes after parsing. Fixes: 28033ae4 ("net: netlink: Update attr validation to require exact length for some types") Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Nikita V. Shirokov authored
commit 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by:
Nikita V. Shirokov <tehnerd@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6xxx error patch fixes While trying to bring up a new PHY on a board, i exercised the error paths a bit, and discovered some bugs. The unwind for interrupt handling deadlocks, and the MDIO code hits a BUG() when a registered MDIO device is freed without first being unregistered. ==================== Signed-off-by: -
Andrew Lunn authored
The MDIO busses need to be unregistered before they are freed, otherwise BUG() is called. Add a call to the unregister code if the registration fails, since we can have multiple busses, of which some may correctly register before one fails. This requires moving the code around a little. Fixes: a3c53be5 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Andrew Lunn authored
When removing the interrupt handling code, we should mask the generation of interrupts. The code however unmasked all interrupts. This can then cause a new interrupt. We then get into a deadlock where the interrupt thread is waiting to run, and the code continues, trying to remove the interrupt handler, which means waiting for the thread to complete. On a UP machine this deadlocks. Fix so we really mask interrupts in the hardware. The same error is made in the error path when install the interrupt handling code. Fixes: 3460a577 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by:
-
Branislav Radocaj authored
If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Branislav Radocaj <branislav@radocaj.org> Signed-off-by:
-
Tobias Jordan authored
add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1 ("net: mvmdio: get and enable optional clock") Signed-off-by:
Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by:
-
- 06 Dec, 2017 5 commits
-
-
Pravin Shedge authored
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by:
Pravin Shedge <pravin.shedge4linux@gmail.com> Reviewed-by:
-
Håkon Bugge authored
This is a fix for syzkaller719569, where memory registration was attempted without any underlying transport being loaded. Analysis of the case reveals that it is the setsockopt() RDS_GET_MR (2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable. Here is an example stack trace when the bug is hit: BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 IP: __rds_rdma_map+0x36/0x440 [rds] PGD 2f93d03067 P4D 2f93d03067 PUD 2f93d02067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror dm_region_hash dm_log dm_mod CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 task: ffff882f9190db00 task.stack: ffffc9002b994000 RIP: 0010:__rds_rdma_map+0x36/0x440 [rds] RSP: 0018:ffffc9002b997df0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff882fa2182580 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc9002b997e40 RDI: ffff882fa2182580 RBP: ffffc9002b997e30 R08: 0000000000000000 R09: 0000000000000002 R10: ffff885fb29e3838 R11: 0000000000000000 R12: ffff882fa2182580 R13: ffff882fa2182580 R14: 0000000000000002 R15: 0000000020000ffc FS: 00007fbffa20b700(0000) GS:ffff882fbfb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000002f98a66006 CR4: 00000000001606e0 Call Trace: rds_get_mr+0x56/0x80 [rds] rds_setsockopt+0x172/0x340 [rds] ? __fget_light+0x25/0x60 ? __fdget+0x13/0x20 SyS_setsockopt+0x80/0xe0 do_syscall_64+0x67/0x1b0 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fbff9b117f9 RSP: 002b:00007fbffa20aed8 EFLAGS: 00000293 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000000c84a4 RCX: 00007fbff9b117f9 RDX: 0000000000000002 RSI: 0000400000000114 RDI: 000000000000109b RBP: 00007fbffa20af10 R08: 0000000000000020 R09: 00007fbff9dd7860 R10: 0000000020000ffc R11: 0000000000000293 R12: 0000000000000000 R13: 00007fbffa20b9c0 R14: 00007fbffa20b700 R15: 0000000000000021 Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48 89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48> 83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08 The fix is to check the existence of an underlying transport in __rds_rdma_map(). Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Chris Dion authored
Macvlan devices are similar to vlans and do not update their own trans_start. In order for arp monitoring to work for a bond device when the slaves are macvlans, obtain its real device. Signed-off-by:
Chris Dion <christopher.dion@dell.com> Signed-off-by:
-
Joe Perches authored
Using a period after a newline causes bad output. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
Florian Westphal authored
Offload IP header checksum to NIC. This fixes a previous patch which disabled checksum offloading for both IPv4 and IPv6 packets. So L3 checksum offload was getting disabled for IPv4 pkts. And HW is dropping these pkts for some reason. Without this patch, IPv4 TSO appears to be broken: WIthout this patch I get ~16kbyte/s, with patch close to 2mbyte/s when copying files via scp from test box to my home workstation. Looking at tcpdump on sender it looks like hardware drops IPv4 TSO skbs. This patch restores performance for me, ipv6 looks good too. Fixes: fa6d7cb5 ("net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts") Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 05 Dec, 2017 17 commits
-
-
Al Viro authored
This changes calling conventions (and simplifies the hell out the callers). New rules: once struct socket had been passed to sock_alloc_file(), it's been consumed either by struct file or by sock_release() done by sock_alloc_file(). Either way the caller should not do sock_release() after that point. Reviewed-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
simplifies failure exits considerably... Reviewed-by:
-
Al Viro authored
1) it's fput() or sock_release(), not both 2) don't do fd_install() until the last failure exit. 3) not a bug per se, but... don't attach socket to struct file until it's set up. Take reserving descriptor into the caller, move fd_install() to the caller, sanitize failure exits and calling conventions. Cc: stable@vger.kernel.org # v4.6+ Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Mohamed Ghannam authored
Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL. Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by:
-
Eric Dumazet authored
Alexander Potapenko reported use of uninitialized memory [1] This happens when inserting a request socket into TCP ehash, in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized. Bug was added by commit d894ba18 ("soreuseport: fix ordering for mixed v4/v6 sockets") Note that d296ba60 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") missed the opportunity to get rid of hlist_nulls_add_tail_rcu() : Both UDP sockets and TCP/DCCP listeners no longer use __sk_nulls_add_node_rcu() for their hash insertion. Since all other sockets have unique 4-tuple, the reuseport status has no special meaning, so we can always use hlist_nulls_add_head_rcu() for them and save few cycles/instructions. [1] ================================================================== BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x185/0x1d0 lib/dump_stack.c:52 kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016 __msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766 __sk_nulls_add_node_rcu ./include/net/sock.h:684 inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754 inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765 tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414 tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314 tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917 tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483 tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763 ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216 NF_HOOK ./include/linux/netfilter.h:248 ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257 dst_input ./include/net/dst.h:477 ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397 NF_HOOK ./include/linux/netfilter.h:248 ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298 __netif_receive_skb net/core/dev.c:4336 netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497 napi_skb_finish net/core/dev.c:4858 napi_gro_receive+0x629/0xa50 net/core/dev.c:4889 e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018 e1000_clean_rx_irq+0x1492/0x1d30 drivers/net/ethernet/intel/e1000/e1000_main.c:4474 e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819 napi_poll net/core/dev.c:5500 net_rx_action+0x73c/0x1820 net/core/dev.c:5566 __do_softirq+0x4b4/0x8dd kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 irq_exit+0x203/0x240 kernel/softirq.c:405 exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638 do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263 common_interrupt+0x86/0x86 Fixes: d894ba18 ("soreuseport: fix ordering for mixed v4/v6 sockets") Fixes: d296ba60 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") Signed-off-by:
Alexander Potapenko <glider@google.com> Acked-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
David S. Miller authored
Subash Abhinov Kasiviswanathan says: ==================== net: qualcomm: rmnet: Fix leaks in failure scenarios Patch 1 fixes a leak in transmit path where a skb cannot be transmitted due to insufficient headroom to stamp the map header. Patch 2 fixes a leak in rmnet_newlink() failure because the rmnet endpoint was never freed ==================== Signed-off-by: -
Subash Abhinov Kasiviswanathan authored
If the rmnet device creation fails in the newlink either while registering with the physical device or after subsequent operations, the rmnet endpoint information is never freed. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
If a skb in transmit path does not have sufficient headroom to add the map header, the skb is not sent out and is never freed. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
-
Stefan Hajnoczi authored
Since commit 3b4477d2 ("VSOCK: use TCP state constants for sk_state") VSOCK has used TCP_* constants for sk_state. Commit b4562ca7 ("hv_sock: add locking in the open/close/release code paths") reintroduced the SS_DISCONNECTING constant. This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING constant. CC: Dexuan Cui <decui@microsoft.com> CC: Cathy Avery <cavery@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Jon Maloy authored
When the function tipc_accept_from_sock() fails to create an instance of struct tipc_subscriber it omits to free the already created instance of struct tipc_conn instance before it returns. We fix that with this commit. Reported-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Cong Wang authored
In tipc_topsrv_kern_subscr() when s->tipc_conn_new() fails we call tipc_close_conn() to clean up, but in this case calling conn_put() is just enough. This fixes the folllowing crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 3085 Comm: syzkaller064164 Not tainted 4.15.0-rc1+ #137 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: 00000000c24413a5 task.stack: 000000005e8160b5 RIP: 0010:__lock_acquire+0xd55/0x47f0 kernel/locking/lockdep.c:3378 RSP: 0018:ffff8801cb5474a8 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff85ecb400 RBP: ffff8801cb547830 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff87489d60 R12: ffff8801cd2980c0 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000020 FS: 00000000014ee880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffee2426e40 CR3: 00000001cb85a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:4004 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:320 [inline] tipc_subscrb_subscrp_delete+0x8f/0x470 net/tipc/subscr.c:201 tipc_subscrb_delete net/tipc/subscr.c:238 [inline] tipc_subscrb_release_cb+0x17/0x30 net/tipc/subscr.c:316 tipc_close_conn+0x171/0x270 net/tipc/server.c:204 tipc_topsrv_kern_subscr+0x724/0x810 net/tipc/server.c:514 tipc_group_create+0x702/0x9c0 net/tipc/group.c:184 tipc_sk_join net/tipc/socket.c:2747 [inline] tipc_setsockopt+0x249/0xc10 net/tipc/socket.c:2861 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 14c04493 ("tipc: add ability to order and receive topology events in driver") Reported-by:Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Thomas Petazzoni says: ==================== net: sh_eth: DMA mapping API fixes Here are two patches that fix how the sh_eth driver is using the DMA mapping API: a bogus struct device is used in some places, or a NULL struct device is used. ==================== Signed-off-by: -
Thomas Petazzoni authored
Using NULL as argument for the DMA mapping API is bogus, as the DMA mapping API may use information from the "struct device" to perform the DMA mapping operation. Therefore, pass the appropriate "struct device". Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Thomas Petazzoni authored
There are two types of "struct device": the one representing the physical device on its physical bus (platform, SPI, PCI, etc.), and the one representing the logical device in its device class (net, etc.). The DMA mapping API expects to receive as argument a "struct device" representing the physical device, as the "struct device" contains information about the bus that the DMA API needs. However, the sh_eth driver mistakenly uses the "struct device" representing the logical device (embedded in "struct net_device") rather than the "struct device" representing the physical device on its bus. This commit fixes that by adjusting all calls to the DMA mapping API. Signed-off-by:
-
David S. Miller authored
Nogah Frankel says: ==================== RED qdisc fixes Add some input validation checks to RED qdisc. ==================== Signed-off-by: -
Nogah Frankel authored
Check the qmin & qmax values doesn't overflow for the given Wlog value. Check that qmin <= qmax. Fixes: a7834745 ("[PKT_SCHED]: Generic RED layer") Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
-
Nogah Frankel authored
Do not allow delta value to be zero since it is used as a divisor. Fixes: 8af2a218 ("sch_red: Adaptative RED AQM") Signed-off-by:
-
