- 03 Jun, 2018 40 commits
-
-
Michal Suchanek authored
Based on the RFI patching. This is required to be able to disable the speculation barrier. Only one barrier type is supported and it does nothing when the firmware does not enable it. Also re-patching modules is not supported So the only meaningful thing that can be done is patching out the speculation barrier at boot when the user says it is not wanted. Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michal Suchanek authored
A no-op form of ori (or immediate of 0 into r31 and the result stored in r31) has been re-tasked as a speculation barrier. The instruction only acts as a barrier on newer machines with appropriate firmware support. On older CPUs it remains a harmless no-op. Implement barrier_nospec using this instruction. mpe: The semantics of the instruction are believed to be that it prevents execution of subsequent instructions until preceding branches have been fully resolved and are no longer executing speculatively. There is no further documentation available at this time. Signed-off-by:
-
Michael Ellerman authored
This now has new code in it written by Nick and I, and switch to a SPDX tag. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com>
-
Michael Ellerman authored
This allows eg. the RCU stall detector, or the soft/hardlockup detectors to trigger a backtrace on all CPUs. We implement this by sending a "safe" NMI, which will actually only send an IPI. Unfortunately the generic code prints "NMI", so that's a little confusing but we can probably live with it. If one of the CPUs doesn't respond to the IPI, we then print some info from it's paca and do a backtrace based on its saved_r1. Example output: INFO: rcu_sched detected stalls on CPUs/tasks: 2-...0: (0 ticks this GP) idle=1be/1/4611686018427387904 softirq=1055/1055 fqs=25735 (detected by 4, t=58847 jiffies, g=58, c=57, q=1258) Sending NMI from CPU 4 to CPUs 2: CPU 2 didn't respond to backtrace IPI, inspecting paca. irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 3623 (bash) Back trace of paca->saved_r1 (0xc0000000e1c83ba0) (possibly stale): Call Trace: [c0000000e1c83ba0] [0000000000000014] 0x14 (unreliable) [c0000000e1c83bc0] [c000000000765798] lkdtm_do_action+0x48/0x80 [c0000000e1c83bf0] [c000000000765a40] direct_entry+0x110/0x1b0 [c0000000e1c83c90] [c00000000058e650] full_proxy_write+0x90/0xe0 [c0000000e1c83ce0] [c0000000003aae3c] __vfs_write+0x6c/0x1f0 [c0000000e1c83d80] [c0000000003ab214] vfs_write+0xd4/0x240 [c0000000e1c83dd0] [c0000000003ab5cc] ksys_write+0x6c/0x110 [c0000000e1c83e30] [c00000000000b860] system_call+0x58/0x6c Signed-off-by:
-
Michael Ellerman authored
Currently the options we have for sending NMIs are not necessarily safe, that is they can potentially interrupt a CPU in a non-recoverable region of code, meaning the kernel must then panic(). But we'd like to use smp_send_nmi_ipi() to do cross-CPU calls in situations where we don't want to risk a panic(), because it doesn't have the requirement that interrupts must be enabled like smp_call_function(). So add an API for the caller to indicate that it wants to use the NMI infrastructure, but doesn't want to do anything "unsafe". Currently that is implemented by not actually calling cause_nmi_ipi(), instead falling back to an IPI. In future we can pass the safe parameter down to cause_nmi_ipi() and the individual backends can potentially take it into account before deciding what to do. Signed-off-by:
-
Michael Ellerman authored
A CPU that gets stuck with interrupts hard disable can be difficult to debug, as on some platforms we have no way to interrupt the CPU to find out what it's doing. A stop-gap is to have the CPU save it's stack pointer (r1) in its paca when it hard disables interrupts. That way if we can't interrupt it, we can at least trace the stack based on where it last disabled interrupts. In some cases that will be total junk, but the stack trace code should handle that. In the simple case of a CPU that disable interrupts and then gets stuck in a loop, the stack trace should be informative. We could clear the saved stack pointer when we enable interrupts, but that loses information which could be useful if we have nothing else to go on. Signed-off-by:
-
Michael Ellerman authored
set_fs() sets the addr_limit, which is used in access_ok() to determine if an address is a user or kernel address. Some code paths use set_fs() to temporarily elevate the addr_limit so that kernel code can read/write kernel memory as if it were user memory. That is fine as long as the code can't ever return to userspace with the addr_limit still elevated. If that did happen, then userspace can read/write kernel memory as if it were user memory, eg. just with write(2). In case it's not clear, that is very bad. It has also happened in the past due to bugs. Commit 5ea0727b ("x86/syscalls: Check address limit on user-mode return") added a mechanism to check the addr_limit value before returning to userspace. Any call to set_fs() sets a thread flag, TIF_FSCHECK, and if we see that on the return to userspace we go out of line to check that the addr_limit value is not elevated. For further info see the above commit, as well as: https://lwn.net/Articles/722267/ https://bugs.chromium.org/p/project-zero/issues/detail?id=990 Verified to work on 64-bit Book3S using a POC that objdumps the system call handler, and a modified lkdtm_CORRUPT_USER_DS() that doesn't kill the caller. Before: $ sudo ./test-tif-fscheck ... 0000000000000000 <.data>: 0: e1 f7 8a 79 rldicl. r10,r12,30,63 4: 80 03 82 40 bne 0x384 8: 00 40 8a 71 andi. r10,r12,16384 c: 78 0b 2a 7c mr r10,r1 10: 10 fd 21 38 addi r1,r1,-752 14: 08 00 c2 41 beq- 0x1c 18: 58 09 2d e8 ld r1,2392(r13) 1c: 00 00 41 f9 std r10,0(r1) 20: 70 01 61 f9 std r11,368(r1) 24: 78 01 81 f9 std r12,376(r1) 28: 70 00 01 f8 std r0,112(r1) 2c: 78 00 41 f9 std r10,120(r1) 30: 20 00 82 41 beq 0x50 34: a6 42 4c 7d mftb r10 After: $ sudo ./test-tif-fscheck Killed And in dmesg: Invalid address limit on user-mode return WARNING: CPU: 1 PID: 3689 at ../include/linux/syscalls.h:260 do_notify_resume+0x140/0x170 ... NIP [c00000000001ee50] do_notify_resume+0x140/0x170 LR [c00000000001ee4c] do_notify_resume+0x13c/0x170 Call Trace: do_notify_resume+0x13c/0x170 (unreliable) ret_from_except_lite+0x70/0x74 Performance overhead is essentially zero in the usual case, because the bit is checked as part of the existing _TIF_USER_WORK_MASK check. Signed-off-by:
-
Michael Ellerman authored
It's called 'fs' for historical reasons, it's named after the x86 'FS' register. But we don't have to use that name for the member of thread_struct, and in fact arch/x86 doesn't even call it 'fs' anymore. So rename it to 'addr_limit', which better reflects what it's used for, and is also the name used on other arches. Signed-off-by: -
Al Viro authored
In PPC_PTRACE_GETHWDBGINFO and PPC_PTRACE_SETHWDEBUG we do an access_ok() check and then __copy_{from,to}_user(). Instead we should just use copy_{from,to}_user() which does all that for us and is less error prone. Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
-
Sam Bobroff authored
The EEH report functions now share a fair bit of code around the start and end of each function. So factor out as much as possible, and move the traversal into a custom function. This also allows accurate debug to be generated more easily. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> [mpe: Format with clang-format] Signed-off-by:
-
Sam Bobroff authored
If a device without a driver is recovered via EEH, the flag EEH_DEV_NO_HANDLER is incorrectly left set on the device after recovery, because the test in eeh_report_resume() for the existence of a bound driver is done before the flag is cleared. If a driver is later bound, and EEH experienced again, some of the drivers EEH handers are not called. To correct this, clear the flag unconditionally after EEH processing is complete. Signed-off-by:
-
Sam Bobroff authored
To ease future refactoring, extract calls to eeh_enable_irq() and eeh_disable_irq() from the various report functions. This makes the report functions initial sequences more similar, as well as making the IRQ changes visible when reading eeh_handle_normal_event(). Signed-off-by:
-
Sam Bobroff authored
To ease future refactoring, extract setting of the channel state from the report functions out into their own functions. This increases the amount of code that is identical across all of the report functions. Signed-off-by:
-
Sam Bobroff authored
The same test is done in every EEH report function, so factor it out. Since eeh_dev_removed() needs to be moved higher up in the file, simplify it a little while we're at it. Signed-off-by:
-
Sam Bobroff authored
Add a for_each-style macro for iterating through PEs without the boilerplate required by a traversal function. eeh_pe_next() is now exported, as it is now used directly in place. Signed-off-by:
-
Sam Bobroff authored
As EEH event handling progresses, a cumulative result of type pci_ers_result is built up by (some of) the eeh_report_*() functions using either: if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; or: if ((*res == PCI_ERS_RESULT_NONE) || (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc; if (*res == PCI_ERS_RESULT_DISCONNECT && rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; (Where *res is the accumulator.) However, the intent is not immediately clear and the result in some situations is order dependent. Address this by assigning a priority to each result value, and always merging to the highest priority. This renders the intent clear, and provides a stable value for all orderings. Signed-off-by:
-
Sam Bobroff authored
To aid debugging, add a message to show when EEH processing for a PE will be done at the device's parent, rather than directly at the device. Signed-off-by:
-
Sam Bobroff authored
The traversal functions eeh_pe_traverse() and eeh_pe_dev_traverse() both provide their first argument as void * but every single user casts it to the expected type. Change the type of the first parameter from void * to the appropriate type, and clean up all uses. Signed-off-by:
-
Sam Bobroff authored
Signed-off-by:
-
Sam Bobroff authored
Correct two cases where eeh_pcid_get() is used to reference the driver's module but the reference is dropped before the driver pointer is used. In eeh_rmv_device() also refactor a little so that only two calls to eeh_pcid_put() are needed, rather than three and the reference isn't taken at all if it wasn't needed. Signed-off-by:
-
Sam Bobroff authored
Add a single log line at the end of successful EEH recovery, so that it's clear that event processing has finished. Signed-off-by:
-
Anju T Sudhakar authored
Since thread-imc internally use the core-imc hardware infrastructure and is depended on it, having thread-imc in the kernel in the absence of core-imc is trivial. Patch disables thread-imc, if core-imc is not registered. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Anju T Sudhakar authored
Return proper error code for unknown domain during IMC initialization. Signed-off-by:
-
Anju T Sudhakar authored
Replace the direct return statement in imc_mem_init() with goto, to adhere to the kernel coding style. Signed-off-by:
-
Anju T Sudhakar authored
When any of the IMC (In-Memory Collection counter) devices fail to initialize, imc_common_mem_free() frees set of memory. In doing so, pmu_ptr pointer is also freed. But pmu_ptr pointer is used in subsequent function (imc_common_cpuhp_mem_free()) which is wrong. Patch here reorders the code to avoid such access. Also free the memory which is dynamically allocated during imc initialization, wherever required. Signed-off-by:
-
YueHaibing authored
The device node obtained with of_find_compatible_node() should be released by calling of_node_put(). But it was not released when of_get_property() failed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> [mpe: Invert the sense of the if so we only need one return path] Signed-off-by:
-
Fabio Estevam authored
Structure platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Russell Currey authored
The GETFIELD and SETFIELD macros in xive-regs.h aren't used except for a single instance of GETFIELD, so replace that and remove them. These macros are also defined in vas.h, so either those should be eventually replaced or the macros moved into bitops.h. Signed-off-by:
Russell Currey <ruscur@russell.cc> [mpe: Rewrite the assignment to 'he' to avoid ffs() etc.] Signed-off-by:
-
Stewart Smith authored
time_init() will set up tb_ticks_per_usec based on reality. time_init() is called *after* udbg_init_opal_common() during boot. from arch/powerpc/kernel/time.c: unsigned long tb_ticks_per_usec = 100; /* sane default */ Currently, all powernv systems have a timebase frequency of 512mhz (512000000/1000000 == 0x200) - although there's nothing written down anywhere that I can find saying that we couldn't make that different based on the requirements in the ISA. So, we've been (accidentally) thwacking the (currently) correct (for powernv at least) value for tb_ticks_per_usec earlier than we otherwise would have. The "sane default" seems to be adequate for our purposes between udbg_init_opal_common() and time_init() being called, and if it isn't, then we should probably be setting it somewhere that isn't hvc_opal.c! Signed-off-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
to_tm() is now completely unused, the only reference being in the _dump_time() helper that is also unused. This removes both, leaving the rest of the powerpc RTC code y2038 safe to as far as the hardware supports. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
update_persistent_clock() is deprecated because it suffers from overflow in 2038 on 32-bit architectures. This changes powerpc to use the update_persistent_clock64() replacement, and to pass down 64-bit timestamps consistently. This is now simpler, as we no longer have to worry about the offset numbers in tm_year and tm_mon that are different between the Linux conventions and RTAS. Signed-off-by:
-
Arnd Bergmann authored
Looking through the remaining users of the deprecated mktime() function, I found the powerpc rtc handlers, which use it in place of rtc_tm_to_time64(). To clean this up, I'm changing over the read_persistent_clock() function to the read_persistent_clock64() variant, and change all the platform specific handlers along with it. Signed-off-by:
-
Arnd Bergmann authored
The to_tm() helper function operates on a signed integer for the time, so it will suffer from overflow in 2038, even on 64-bit kernels. Rather than fix that function, this replaces its use in the rtas procfs implementation with the standard rtc_time64_to_tm() helper that is very similar but is not affected by the overflow. In order to actually support long times, the parser function gets changed to 64-bit user input and output as well. Note that the tm_mon and tm_year representation is slightly different, so we have to manually add an offset here. Signed-off-by:
-
Arnd Bergmann authored
In order to use the rtc_tm_to_time64() and rtc_time64_to_tm() helper functions in later patches, we have to ensure that CONFIG_RTC_LIB is always built-in. Note that this symbol only controls a couple of helper functions, not the actual RTC subsystem, which remains optional and is enabled with CONFIG_RTC_CLASS. Signed-off-by:
-
Olof Johansson authored
Needed on Amiga X1000 with SB600. Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Aneesh Kumar K.V authored
When inserting SLB entries for EA above 512TB, we need to hard disable irq. This will make sure we don't take a PMU interrupt that can possibly touch user space address via a stack dump. To prevent this, we need to hard disable the interrupt. Also add a comment explaining why we don't need context synchronizing isync with slbmte. Fixes: f384796c ("powerpc/mm: Add support for handling > 512TB address in SLB miss") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
With split pmd page table lock enabled, we don't use mm->page_table_lock when updating pmd entries. This patch update hugetlb path to use the right lock when inserting huge page directory entries into page table. ex: if we are using hugepd and inserting hugepd entry at the pmd level, we use pmd_lockptr, which based on config can be split pmd lock. For update huge page directory entries itself we use mm->page_table_lock. We do have a helper huge_pte_lockptr() for that. Fixes: 675d9952 ("powerpc/book3s64: Enable split pmd ptlock") Signed-off-by:
-
Aneesh Kumar K.V authored
Currently we do not have an isync, or any other context synchronizing instruction prior to the slbie/slbmte in _switch() that updates the SLB entry for the kernel stack. However that is not correct as outlined in the ISA. From Power ISA Version 3.0B, Book III, Chapter 11, page 1133: "Changing the contents of ... the contents of SLB entries ... can have the side effect of altering the context in which data addresses and instruction addresses are interpreted, and in which instructions are executed and data accesses are performed. ... These side effects need not occur in program order, and therefore may require explicit synchronization by software. ... The synchronizing instruction before the context-altering instruction ensures that all instructions up to and including that synchronizing instruction are fetched and executed in the context that existed before the alteration." And page 1136: "For data accesses, the context synchronizing instruction before the slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures that all preceding instructions that access data storage have completed to a point at which they have reported all exceptions they will cause." We're not aware of any bugs caused by this, but it should be fixed regardless. Add the missing isync when updating kernel stack SLB entry. Cc: stable@vger.kernel.org Signed-off-by:
-
Nicholas Piggin authored
The stores to update the SLB shadow area must be made as they appear in the C code, so that the hypervisor does not see an entry with mismatched vsid and esid. Use WRITE_ONCE for this. GCC has been observed to elide the first store to esid in the update, which means that if the hypervisor interrupts the guest after storing to vsid, it could see an entry with old esid and new vsid, which may possibly result in memory corruption. Signed-off-by:
-
Nicholas Piggin authored
When a single-threaded process has a non-local mm_cpumask, try to use that point to flush the TLBs out of other CPUs in the cpumask. An IPI is used for clearing remote CPUs for a few reasons: - An IPI can end lazy TLB use of the mm, which is required to prevent TLB entries being created on the remote CPU. The alternative is to drop lazy TLB switching completely, which costs 7.5% in a context switch ping-pong test betwee a process and kernel idle thread. - An IPI can have remote CPUs flush the entire PID, but the local CPU can flush a specific VA. tlbie would require over-flushing of the local CPU (where the process is running). - A single threaded process that is migrated to a different CPU is likely to have a relatively small mm_cpumask, so IPI is reasonable. No other thread can concurrently switch to this mm, because it must have been given a reference to mm_users by the current thread before it can use_mm. mm_users can be asynchronously incremented (by mm_activate or mmget_not_zero), but those users must use remote mm access and can't use_mm or access user address space. Existing code makes the this assumption already, for example sparc64 has reset mm_cpumask using this condition since the start of history, see arch/sparc/kernel/smp_64.c. This reduces tlbies for a kernel compile workload from 0.90M to 0.12M, tlbiels are increased significantly due to the PID flushing for the cleaning up remote CPUs, and increased local flushes (PID flushes take 128 tlbiels vs 1 tlbie). Signed-off-by:
-
