- 20 Aug, 2009 1 commit
-
-
Gábor Stefanik authored
The V4 dummy transmission has two extra bools in its prototype, so update all callers with the 2 bools. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 14 Aug, 2009 39 commits
-
-
Oliver Hartkopp authored
To ensure a proper handling of CAN frames transported in skbuffs some checks need to be performed at receive time. As stated by Michael Olbrich and Luotao Fu BUG_ON() might be to restrictive. This is right as we can just drop the non conform skbuff and the Kernel can continue working. This patch replaces the BUG_ON() with a WARN_ONCE() so that the system remains healthy but we made the problem visible (once). Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Urs Thuermann <urs@isnogud.escape.de> CC: Michael Olbrich <m.olbrich@pengutronix.de> CC: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The whole restarting flag was introduced by Mike McCormack and was a temporary duct tape patch around issues with transmits inflight during restart. The problems it was covering are now fixed and the code should have been reverted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yi Zou authored
Enable netdev feature flag bit NETIF_F_FCOE_MTU for 82599 devices and enable jumbo frame correspondingly when NETIF_F_FCOE_MTU is set. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yi Zou authored
Add NETIF_F_FCOE_MTU to indicate that the NIC can support a secondary MTU for converged traffic of LAN and Fiber Channel over Ethernet (FCoE). The MTU for FCoE is 2158 = 14 (FCoE header) + 24 (FC header) + 2112 (FC max payload) + 4 (FC CRC) + 4 (FCoE trailer). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasu Dev authored
Updates netdev->vlan_features for NETIF_F_FCOE_CRC and NETIF_F_FSO, so that FCoE CRC and GSO offloads will get used for FCoE over ixgbe based vlan interface. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasu Dev authored
Adds fcoe offload related net_device_ops functions vlan_dev_fcoe_ddp_setup and vlan_dev_fcoe_ddp_done, their implementation simply calls real eth device net_device_ops for FCoE DDP setup and done operations. Updates VLAN netdev field value for fcoe_ddp_xid from real eth device netdev. Above changes are required for fcoe DDP offload working on a VLAN interface. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The sky2 driver combines auto speed negotiation with automatic negotiation of pause parameters; but the ethtool interface expects them to be split. This patch allows autonegotiation to be used for speed, but manually disable flow control. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Transmit completion can safely run lockless against transmit start. In the normal case, completion is done from NAPI and only looks at elements that are at the tail of the ring. When doing shutdown or reset, the transmiter should be completely block by NAPI disable and blocking of transmit queue. Based on earlier work by Mike McCormack. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
This unifies the places that bounce the device (suspend/resume and restart). And makes the operations have the same semantics as normal dev_open/dev_stop. This also avoids setting the multicast addresses twice when device is brought up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The suspend and shutdown code plays with shared state. Use consistent locking, for extra protection. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Avoid any possible problems with accessing PHY registers on shutdown. This is a purely theoretical issue and is not related to any of the outstanding bug reports. Since receiver and transmitter are already shutdown and phy interrupts for this device are already disabled, there should already be enough protection. Suggested by Mike McCormack. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike McCormack authored
Reseting the tx chain too soon results in invalid tx queue positions being delivered in the status queue. This also makes sure there's no overlap between the cleanup done by sky2_tx_clean() and sky2_tx_done(). Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike McCormack authored
This is pure refactoring. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike McCormack authored
Keep sky2->tx_prod consistent since int might be examined by an softirq poll or restart. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gábor Stefanik authored
Also implement get/set BB mult, get/set TX gain, set RX gain, disable/restore CRS, run/stop DDFS, RX IQ est and QDIV roundup in the process. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
This patch fixes a bug in ath9k_stop() where the HW was not put into FULL_SLEEP state. Not doing so will cause issues in suspend-resume and the HW will not respond to chip resets. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
This patch fixes a bug where the device was enabled before restoring the PCI state. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
diversity_control and antenna_switch_swap are already present in ath9k_ops_config. Remove duplicate occurrences in ath_hw. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
PHY counters are available in all chipsets supported by ath9k. Remove the check. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
ath9k supports the AR9002 family of chipsets. This includes the AR9285 and the miniPCI AR9223 and AR9220 (which themselves have AR9280+AR5133). We now refer people to the wiki page as it seems this is not as popular as we would have hoped. Reported-by: JD <jd1008@gmail.com> Cc: Dakota Lee <Dakota.Lee@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Sometimes drivers might have a good reason to override the PS default, like iwlwifi right now where it affects RX performance significantly at this point. This will allow them to override the default, if desired, in a way that users can still change it according to their trade-off choices, not the driver's, like would happen if the driver just disabled PS completely then. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
If you trigger a scan request on an interface and then take it down, or rmmod the module or unplug the device the driver might "forget" to cancel the scan request. That is a bug in the driver, but the current behaviour is that we just hang endlessly waiting for the netdev refcount to become 0 which it never will. To improve robustness, check for this situation in cfg80211, warn about it and clean up behind the driver. I don't just clean up silently because it's likely that the driver also has some internal state it has now leaked. Additionally, this fixes a locking bug, clearing the scan_req pointer should be done under the rdev lock. Finally, we also need to _wait_ for the scan work and not just abort it since it might be pending and wanting to do a cleanup. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Woo authored
The length of the fixed portion of plink confirm frames is 4 bytes longer than the other plink_action frames. This path corrects an error in the length adjustment done for these type of frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Woo authored
If a PREQ frame is received giving us a fresher DSN than what we have, record the new dsn and mark it as valid. This patch fixes a bug in the setting of the MESH_PATH_DSN_VALID flag. Also, minor fix to coding style on that file. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
This matches ath9k, providing consistency when reading both drivers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Now that its shared we can remove ath5k's own implementation. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Turns out ath5k and ath9k can share the same helper to allocates RX skbs. We allocate skbs aligned to the cache line size. This requirement seems to have come from AR5210; when this was not done it seems sometimes we'd get bogus data. I'm also told it may have been a performance enhancement consideration. In the end I can't be sure we can remove this on new hardware so just keep this and start sharing it through ath.ko. Make ath9k start using this, ath5k is next. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
Luis reported that IRQ_MASK conflicts with include/pcmcia/cs.h on compat-wireless. Remove that and a bunch of other unused defines from wl1251_reg.h. Reported-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
Commit "wl1251: remove wl1251_ops" originally removed file wl1251_ops.c, but while I rebased the patch the removal got lost. Now remote the file for real. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
Commit "iwlwifi: Traffic type and counter for debugFs" broke iwl3945 in a case when CONFIG_IWLWIFI_LEDS is disabled: drivers/net/wireless/iwlwifi/iwl-3945.c:580: error: 'hdr' undeclared (first use in this function) Fix it by removing the ifdef check for hdr variable. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gábor Stefanik authored
Make it possible to write individual gain table entries. Allow gain table entries to be written outside gain table init. Add version-agnostic helpers for writing gain tables. Use the new TX gain table helpers during table init. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jussi Kivilinna authored
Add rx queue pausing to usbnet. This is needed by rndis_wlan so that it can control rx queue and prevent received packets from being send forward before rndis_wlan receives and handles 'media connect'-indication. Without this establishing WPA connections is hard and fail often. [v2] - removed unneeded use of skb_clone Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gábor Stefanik authored
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gábor Stefanik authored
Some of the new variables in b43_phy_lp appear to be dead code in the vendor driver; they will be removed if they remain unused when LP-PHY implementation is finished. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Daniel Mack authored
Devices created by the libertas driver are currently called eth%d. Which is wrong, because the device does not at all have anything to do with Ethernet. And it is also confusing when used on devices with more than one network device. Fix this by calling it wlan%d. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-