- 03 Jun, 2015 19 commits
-
-
Andi Kleen authored
commit 4933f55f upstream. libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Andrew Morton authored
commit 2b1d3ae9 upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by:
-
WANG Cong authored
commit 86e363dc upstream. For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexei Starovoitov authored
commit 3f7352bf upstream. x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Andy Grover authored
commit 5a7125c6 upstream. See https://bugzilla.redhat.com/show_bug.cgi?id=1025672 We need to put() the reference to the scsi host that we got in pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with the dev_virt, not the hba_virt. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Guenter Roeck authored
commit 1b63bf61 upstream. The following error message is seen when loading the nct6775 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by:
Alexey Orishko <alexey.orishko@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Al Viro authored
commit 2159184e upstream. when we find that a child has died while we'd been trying to ascend, we should go into the first live sibling itself, rather than its sibling. Off-by-one in question had been introduced in "deal with deadlock in d_walk()" and the fix needs to be backported to all branches this one has been backported to. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Sasha Levin authored
commit dcbff39d upstream. match_token() expects a NULL terminator at the end of the token list so that it would know where to stop. Not having one causes it to overrun to invalid memory. In practice, passing a mount option that omfs didn't recognize would sometimes panic the system. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Dave Chinner authored
commit 6dfe5a04 upstream. xfs_attr_inactive() is supposed to clean up the attribute fork when the inode is being freed. While it removes attribute fork extents, it completely ignores attributes in local format, which means that there can still be active attributes on the inode after xfs_attr_inactive() has run. This leads to problems with concurrent inode writeback - the in-core inode attribute fork is removed without locking on the assumption that nothing will be attempting to access the attribute fork after a call to xfs_attr_inactive() because it isn't supposed to exist on disk any more. To fix this, make xfs_attr_inactive() completely remove all traces of the attribute fork from the inode, regardless of it's state. Further, also remove the in-core attribute fork structure safely so that there is nothing further that needs to be done by callers to clean up the attribute fork. This means we can remove the in-core and on-disk attribute forks atomically. Also, on error simply remove the in-memory attribute fork. There's nothing that can be done with it once we have failed to remove the on-disk attribute fork, so we may as well just blow it away here anyway. Reported-by:
Waiman Long <waiman.long@hp.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> [ luis: backported to 3.16: - no libxfs in 3.16, xfs_attr_leaf.{c,h} in fs/xfs/ dir - adjusted context ] Signed-off-by:
-
Christian König authored
commit 7c0411d2 upstream. We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Rusty Russell authored
commit 83a35114 upstream. This bug has been there since day 1; addresses in the top guest physical page weren't considered valid. You could map that page (the check in check_gpte() is correct), but if a guest tried to put a pagetable there we'd check that address manually when walking it, and kill the guest. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Chris Lesiak authored
commit adba6575 upstream. When configured via device tree, the associated iio device needs to be measuring voltage for the conversion to resistance to be correct. Return -EINVAL if that is not the case. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
-
Takashi Iwai authored
commit 3530febb upstream. This reverts commit 7290006d. Through the regression report, it was revealed that the tpacpi_led_set() call to thinkpad_acpi helper doesn't only toggle the mute LED but actually mutes the sound. This is contradiction to the expectation, and rather confuses user. According to Henrique, it's not trivial to judge which TP model behaves "LED-only" and which model does whatever more intrusive, as Lenovo's implementations vary model by model. So, from the safety reason, we should revert the patch for now. Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Inki Dae authored
commit 242ddf04 upstream. This patch sets display clock correctly. If Display clock isn't set correctly then you would find below messages and Display controller doesn't work correctly. exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Fixes: abc0b144 ("drm: Perform basic sanity checks on probed modes") Signed-off-by:
Inki Dae <inki.dae@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Johannes Berg authored
commit 22d3a3c8 upstream. No matter how the driver manages its NAPI context, there's no way sending frames to it from a timer can be correct, since it would corrupt the internal GRO lists. To avoid that, always use the non-NAPI path when releasing frames from the timer. Reported-by:
Jean Trivelly <jean.trivelly@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Mark Rutland authored
commit 965278dc upstream. At boot time we round the memblock limit down to section size in an attempt to ensure that we will have mapped this RAM with section mappings prior to allocating from it. When mapping RAM we iterate over PMD-sized chunks, creating these section mappings. Section mappings are only created when the end of a chunk is aligned to section size. Unfortunately, with classic page tables (where PMD_SIZE is 2 * SECTION_SIZE) this means that if a chunk is between 1M and 2M in size the first 1M will not be mapped despite having been accounted for in the memblock limit. This has been observed to result in page tables being allocated from unmapped memory, causing boot-time hangs. This patch modifies the memblock limit rounding to always round down to PMD_SIZE instead of SECTION_SIZE. For classic MMU this means that we will round the memblock limit down to a 2M boundary, matching the limits on section mappings, and preventing allocations from unmapped memory. For LPAE there should be no change as PMD_SIZE == SECTION_SIZE. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Stefan Agner <stefan@agner.ch> Tested-by:
Laura Abbott <labbott@redhat.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Philippe Reynes authored
commit a29ef819 upstream. According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3 ("ARM i.MX27: Add devicetree support") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Michael Brunner authored
commit f230e8ff upstream. This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Michael Brunner <michael.brunner@kontron.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Steven Rostedt authored
commit 37815bf8 upstream. The module notifier call chain for MODULE_STATE_COMING was moved up before the parsing of args, into the complete_formation() call. But if the module failed to load after that, the notifier call chain for MODULE_STATE_GOING was never called and that prevented the users of those call chains from cleaning up anything that was allocated. Link: http://lkml.kernel.org/r/554C52B9.9060700@gmail.comReported-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Fixes: 4982223e "module: set nx before marking module MODULE_STATE_COMING" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 02 Jun, 2015 21 commits
-
-
Russell King authored
commit 1b979372 upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 47cc84ce upstream. When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Bjørn Mork authored
commit 44f6731d upstream. The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by:
Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric W. Biederman authored
commit 381c759d upstream. ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Michal Kubeček authored
commit 27596472 upstream. When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Michal Kubeček authored
commit 35f1b4e9 upstream. If adding a nexthop of an IPv6 multipath route fails, comment in ip6_route_multipath() says we are going to delete all nexthops already added. However, current implementation deletes even the routes it hasn't even tried to add yet. For example, running ip route add 1234:5678::/64 \ nexthop via fe80::aa dev dummy1 \ nexthop via fe80::bb dev dummy1 \ nexthop via fe80::cc dev dummy1 twice results in removing all routes first command added. Limit the second (delete) run to nexthops that succeeded in the first (add) run. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
-
Florent Fourcot authored
commit 21858cd0 upstream. commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Tommi Rantala authored
commit f30bf2a5 upstream. Fix memory leak introduced in commit a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct."): unreferenced object 0xffff88005785b800 (size 2048): comm "(-localed)", pid 1434, jiffies 4294755650 (age 1421.089s) hex dump (first 32 bytes): bb 89 0b 83 ff ff ff ff b0 78 f0 4e 00 88 ff ff .........x.N.... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8262ea8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811fba74>] __kmalloc_track_caller+0x244/0x430 [<ffffffff811b88a0>] kmemdup+0x20/0x50 [<ffffffff823276b7>] ip_vs_control_net_init+0x1f7/0x510 [<ffffffff8231d630>] __ip_vs_init+0x100/0x250 [<ffffffff822363a1>] ops_init+0x41/0x190 [<ffffffff82236583>] setup_net+0x93/0x150 [<ffffffff82236cc2>] copy_net_ns+0x82/0x140 [<ffffffff810ab13d>] create_new_namespaces+0xfd/0x190 [<ffffffff810ab49a>] unshare_nsproxy_namespaces+0x5a/0xc0 [<ffffffff810833e3>] SyS_unshare+0x173/0x310 [<ffffffff8265cbd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff Fixes: a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Harald Freudenberger authored
commit a1cae34e upstream. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Gerald Schaefer <geraldsc@linux.vnet.ibm.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ilya Dryomov authored
commit b0494532 upstream. This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
David Vrabel authored
commit 77bb3dfd upstream. A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Mark Hounschell authored
commit 74856fbf upstream. 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Ludovic Desroches authored
commit 60c8f783 upstream. clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ansgar Hegerfeld authored
commit 09ea9976 upstream. The Lenovo ThinkPad L450 requires the ALC292_FIXUP_TPT440_DOCK fix in order to get sound output on the docking stations audio port. This patch was tested using a ThinkPad L450 (20DSS00B00) using kernel 4.0.3 and a ThinkPad Pro Dock. Signed-off-by:
Ansgar Hegerfeld <linux@hegerfeld.org> Signed-off-by:
-
David Henningsson authored
commit 6ffc0898 upstream. This patch adds support for Conexant HD Audio codecs CX20721, CX20722, CX20723 and CX20724. BugLink: https://bugs.launchpad.net/bugs/1454656Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Anton Blanchard authored
commit 5e95235c upstream. Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in our linker script, otherwise pointers to our TOC variables (__toc_start, __prom_init_toc_start) could be incorrect. If they are bad, we die a few hundred instructions into boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Benjamin Tissoires authored
commit 3c0213d1 upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Zidan Wang authored
commit 17fc2e0a upstream. According to the RM of wm8958, BCLK DIV 348 doesn't exist, correct it to 384. Signed-off-by:
Zidan Wang <zidan.wang@freescale.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Zidan Wang authored
commit 85e36a1f upstream. It should be "RINPUT3" instead of "LINPUT3" route to "Right Input Mixer". Signed-off-by:
-
K. Y. Srinivasan authored
commit dc45708c upstream. Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Xiao Guangrong authored
commit 0be0226f upstream. KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
