- 06 Aug, 2008 14 commits
-
-
Jean Delvare authored
Drop the reset parameter of the w83627hf driver. It seems it wasn't that useful. It was dropped from the Linux 2.4 version of this driver back in July 2004. The only users who have reported that they were still using this parameter, needed it to switch the chip from automatic fan speed control back to manual mode. Now that the driver creates pwmN_enable sysfs files, users will be able to use these files instead, which is way less agressive. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Dominik Geyer <dominik.geyer@gmx.de>
-
Dominik Geyer authored
Adds support for pwm_enable sysfs interface for the w83627hf driver. Signed-off-by:
-
Marc Hulsman authored
Update w83791d with fan bits in vbat mon register (7.48 of the datasheet). This change allows all fans to have a divisor of 128, and fixes a problem with incorrectly reported fan speeds. Signed-off-by:
Marc Hulsman <m.hulsman@tudelft.nl> Signed-off-by:
-
Jean Delvare authored
These functions aren't used before being defined, so there's no point in forward-declaring them. Signed-off-by:
Hans de Goede <j.w.r.degoede@hhs.nl>
-
Juerg Haefliger authored
Add support for the SCH5027. The differences to the DME1737 are: - No support for programmable temp offsets - In auto mode, PWM outputs stay on min value if temp goes below low threshold and can't be programmed to fully turn off - Different voltage scaling - No VID input Signed-off-by:
Juerg Haefliger <juergh@gmail.com> Signed-off-by:
-
Juerg Haefliger authored
Skip the checking of the device ID register in the hwmon register block if the force_id option is used. Signed-off-by:
-
Juerg Haefliger authored
Fix names of attribute structs to make them more consistent with the rest of the code. Minor comment changes. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: -
Linus Torvalds authored
-
Linus Torvalds authored
This re-introduces commit 2b142900, which was reverted due to the regression it caused by commit fca082c9. That regression was not root-caused by the original commit, it was just uncovered by it, and the real fix was done by Alan Stern in commit 580da348 ("Fix USB storage hang on command abort"). We can thus re-introduce the change that was confirmed by Alan Jenkins to be still required by his odd card reader. Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (78 commits) AX.25: Fix sysctl registration if !CONFIG_AX25_DAMA_SLAVE pktgen: mac count pktgen: random flow bridge: Eliminate unnecessary forward delay bridge: fix compile warning in net/bridge/br_netfilter.c ipv4: remove unused field in struct flowi (include/net/flow.h). tg3: Fix 'scheduling while atomic' errors net: Kill plain NET_XMIT_BYPASS. net_sched: Add qdisc __NET_XMIT_BYPASS flag net_sched: Add qdisc __NET_XMIT_STOLEN flag iwl3945: fix merge mistake for packet injection iwlwifi: grap nic access before accessing periphery registers iwlwifi: decrement rx skb counter in scan abort handler iwlwifi: fix unhandled interrupt when HW rfkill is on iwlwifi: implement iwl5000_calc_rssi iwlwifi: memory allocation optimization iwlwifi: HW bug fixes p54: Fix potential concurrent access to private data rt2x00: Disable link tuning in rt2500usb iwlwifi: Don't use buffer allocated on the stack for led names ...
-
Ralf Baechle authored
Since 49ffcf8f ("sysctl: update sysctl_check_table") setting struct ctl_table.procname = NULL does no longer work as it used to the way the AX.25 code is expecting it to resulting in the AX.25 sysctl registration code to break if CONFIG_AX25_DAMA_SLAVE was not set as in some distribution kernels. Kernel releases from 2.6.24 are affected. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Olsson authored
dst_mac_count and src_mac_count patch from Eneas Hunguana We have sent one mac address to much. Signed-off-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
-
Robert Olsson authored
Random flow generation has not worked. This fixes it. Signed-off-by:
-
Stephen Hemminger authored
From: Stephen Hemminger <shemminger@vyatta.com> Based upon original patch by Herbert Xu, which contained the following problem description: -------------------- When the forward delay is set to zero, we still delay the setting of the forwarding state by one or possibly two timers depending on whether STP is enabled. This could either turn out to be instantaneous, or horribly slow depending on the load of the machine. As there is nothing preventing us from enabling forwarding straight away, this patch eliminates this potential delay by executing the code directly if the forward delay is zero. The effect of this problem is that immediately after the carrier comes on a port, the bridge will drop all packets received from that port until it enters forwarding mode, thus causing unnecessary packet loss. Note that this patch doesn't fully remove the delay due to the link watcher. We should also check the carrier state when we are about to drop an incoming packet because the port is disabled. But that's for another patch. -------------------- This version of the fix takes a different approach, in that it just does the state change directly. Signed-off-by:
-
- 05 Aug, 2008 26 commits
-
-
Randy Dunlap authored
Fix (fatal error) s390 docbook file to handle renamed header files. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Andrew Morton authored
mips allmodconfig: drivers/media/video/vino.c: In function `vino_free_buffer_with_count': drivers/media/video/vino.c:811: warning: passing arg 1 of `virt_to_phys' makes pointer from integer without a cast drivers/media/video/vino.c: In function `vino_allocate_buffer': drivers/media/video/vino.c:889: warning: passing arg 1 of `virt_to_phys' makes pointer from integer without a cast drivers/media/video/vino.c: In function `vino_ioctl': drivers/media/video/vino.c:4364: error: implicit declaration of function `video_usercopy' The patch fixes the error, but not the warnings. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Benny Halevy authored
gcc 4.3.0 correctly emits the following warnings. When a vma covering addr is found, find_vma_prepare indeed returns without setting pprev, rb_link, and rb_parent. mm/mmap.c: In function `insert_vm_struct': mm/mmap.c:2085: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:2085: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:2084: warning: `prev' may be used uninitialized in this function mm/mmap.c: In function `copy_vma': mm/mmap.c:2124: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:2124: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:2123: warning: `prev' may be used uninitialized in this function mm/mmap.c: In function `do_brk': mm/mmap.c:1951: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:1951: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:1949: warning: `prev' may be used uninitialized in this function mm/mmap.c: In function `mmap_region': mm/mmap.c:1092: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:1092: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:1089: warning: `prev' may be used uninitialized in this function Hugh adds: in fact, none of find_vma_prepare's callers use those values when a vma is found to be already covering addr, it's either an error or an occasion to munmap and repeat. Okay, let's quieten the compiler (but I would prefer it if pprev, rb_link and rb_parent were meaningful in that case, rather than whatever's in them from descending the tree). Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: "Ryan Hope" <rmh3093@gmail.com> Signed-off-by:
-
Richard Hughes authored
A documentation cleanup patch. With a minor tweak to clarify units for kbs. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
mark gross <mgross@linux.intel.com> Signed-off-by:
-
Alexander Beregalov authored
proc: fix warnings fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 6 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 9 has type 'u64' Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Acked-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Huang Weiyi authored
Removed duplicated include <linux/delay.h> in drivers/misc/sgi-gru/grutlbpurge.c. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Alexander Beregalov authored
fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'u64' fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type '__be64' Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Randy Dunlap authored
Fix handling of nested structs or unions. The regex to strip (eliminate) nested structs or unions was limited to only 0 or 1 matches. This can cause an uneven number of left/right braces to be stripped, which causes this: Warning(linux-2.6.27-rc1-git2//include/net/mac80211.h:336): No description found for parameter '}' Signed-off-by:
-
Jan Beulich authored
get_order() takes byte-sized input, not a page-granular one. Irrespective of this fix I'm inclined to believe that this doesn't work right anyway - bitmap_allocate_region() has an implicit assumption of 'pos' being suitable for 'order', which this function doesn't seem to enforce (and since it's being called with a byte-granular value there's no reason to believe that the callers would make sure device_addr is passed accordingly - it's also not documented that way). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Alexander Beregalov authored
drivers/video/aty/atyfb_base.c:2663: warning: 'aty_resume_chip' defined but not used Signed-off-by:
-
Julia Lawall authored
of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Timur Tabi <timur@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by:
-
Jean Delvare authored
The name of the i2c buses shows in the output of "i2cdetect -l", so it's important to give informative names. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Krzysztof Helt authored
If the 'clear' command is used on the frame buffer with a logo the upper area is filled by few lines but not scrolled anymore. Fix this by removing the protected area for the logo if any part of the logo is cleared. Signed-off-by:
-
David Miller authored
I have a new PCI-E radeon RV380 series card (PCI device ID 5b64) that hangs in my sparc64 boxes when the init scripts set the font. The problem goes away if I disable acceleration. I haven't figured out that bug yet, but along the way I found some corrections to make based upon some auditing. 1) The RB2D_DC_FLUSH_ALL value used by the kernel fb driver and the XORG video driver differ. I've made the kernel match what XORG is using. 2) In radeonfb_engine_reset() we have top-level code structure that roughly looks like: if (family is 300, 350, or V350) do this; else do that; ... if (family is NOT 300, OR family is NOT 350, OR family is NOT V350) do another thing; this last conditional makes no sense, is always true, and obviously was likely meant to be "family is NOT 300, 350, or V350". So I've made the code match the intent. Signed-off-by:
-
Mark Asselstine authored
These functions have been deprecated for some time now but remained until all legacy callers could be removed. With a few commits in 2.6.26 this has happened so now we can remove these deprecated functions. Signed-off-by:
Mark Asselstine <mark.asselstine@windriver.com> Reviewed-by:
Matthew Wilcox <willy@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ben Dooks authored
Add the missing MODULE_ALIAS() to the pwm_backlight driver. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Ben Dooks authored
Make the error paths in the pwm_backlight driver more informative in the probe path, especially for the times that it finds an error. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Mike Frysinger authored
blackfin RTC driver: drop PIE/stopwatch code since the hardware can only do a max of 1HZ and this same functionality is provided by UIE Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Since we use the write complete interrupt, wait for it to complete before sleeping so we don't wake right back up due to it Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
blackfin RTC driver: don't bother passing the rtc struct down to bfin_rtc_int_{set,clear} since it isnt needed (shaves off ~100bytes) Signed-off-by:Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Sonic Zhang authored
Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Mike Frysinger authored
blackfin RTC driver: if we dont define irq_set_freq, the common rtc-dev layer will give us the same behavior of returning ENOTTY Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
David Brownell authored
While I'm glad to finally see the hole fixed whereby passing an invalid IRQ trigger type to request_irq() would be ignored, the current diagnostic isn't quite useful. Fixed by also listing the trigger type which was rejected. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
