It needs to write node pages if checkpoint is not doing in order to avoid
memory pressure.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds to control the memory footprint used by ino entries.
This will conduct best effort, not strictly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds to monitor the number of ino entries.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

The roll-forward mechanism should be activated when the number of active
logs is not 2.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Let's remove unused macro.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

__submit_merged_bio    f2fs_write_end_io        f2fs_write_end_io
                       wait_io = X              wait_io = x
                       complete(X)              complete(X)
                       wait_io = NULL
wait_for_completion()
free(X)
                                                 spin_lock(X)
                                                 kernel panic

In order to avoid this, this patch removes the wait_io facility.
Instead, we can use wait_on_all_pages_writeback(sbi) to wait for end_ios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If there is a chance to make a huge sized discard command, we don't need
to split it out, since each blkdev_issue_discard should wait one at a
time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
 f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

There's no point in using test_and_clear_bit_le() when we don't use the
return value of the function. Just use clear_bit_le() instead.

Coverity-id: 1016434
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

We should not discard any data protected by the previous checkpoint all
the time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

When reading inline data, we should call flush_dcache_page.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

During the write_checkpoint, we should avoid f2fs_gc trigger to avoid any
filesystem consistency.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs_write_begin() doesn't initialize the 'dn' variable if the inode has
inline data. However it uses its contents to decide whether it should
just zero out the page or load data to it. Thus if we are unlucky we can
zero out page contents instead of loading inline data into a page.

CC: stable@vger.kernel.org
CC: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Rename f2fs_set/clear_bit to f2fs_test_and_set/clear_bit, which mean
set/clear bit and return the old value, for better readability.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Set raw_super default to NULL to avoid the possibly used
uninitialized warning, though we may never hit it in fact.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Introduce f2fs_change_bit to simplify the change bit logic in
function set_to_next_nat{sit}.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Use clear_inode_flag to replace the redundant cond_clear_inode_flag.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Remove the unneeded argument 'type' from __get_victim, use
NO_CHECK_TYPE directly when calling v_ops->get_victim().
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If user specifies too low end sector for trimming, f2fs_trim_fs() will
use uninitialized value as a number of trimmed blocks and returns it to
userspace. Initialize number of trimmed blocks early to avoid the
problem.

Coverity-id: 1248809
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch declares f2fs_convert_inline_dir as a static function, which was
reported by kbuild test robot.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

For better performance, we need to use kmap_atomic instead of kmap.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch introduces do_make_empty_dir to mitigate code redundancy
for inline_dentry.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch introduces f2fs_dentry_ptr structure for the use of a function
parameter in inline_dentry operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If the inode has inline_dentry, we should not truncate any block indices.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch introduces a core function, f2fs_fill_dentries, to remove
redundant code in f2fs_readdir and f2fs_read_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch fixes wrongly counting inline_data inode numbers.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds status information for inline_dentry inodes.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Previously, init_inode_metadata does not hold any parent directory's inode
page. So, f2fs_init_acl can grab its parent inode page without any problem.
But, when we use inline_dentry, that page is grabbed during f2fs_add_link,
so that we can fall into deadlock condition like below.

INFO: task mknod:11006 blocked for more than 120 seconds.
      Tainted: G           OE  3.17.0-rc1+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mknod           D ffff88003fc94580     0 11006  11004 0x00000000
 ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8
 0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220
 ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002
Call Trace:
 [<ffffffff8173dc40>] ? bit_wait+0x50/0x50
 [<ffffffff8173d4cd>] io_schedule+0x9d/0x130
 [<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50
 [<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0
 [<ffffffff811640a7>] __lock_page+0x67/0x70
 [<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40
 [<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0
 [<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs]
 [<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs]
 [<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs]
 [<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs]
 [<ffffffff8122d847>] get_acl+0x47/0x70
 [<ffffffff8122db5a>] posix_acl_create+0x5a/0x150
 [<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs]
 [<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs]
 [<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs]
 [<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs]
 [<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs]
 [<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs]
 [<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160
 [<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200
 [<ffffffff81741d7f>] tracesys+0xe1/0xe6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

The inode page needs to wait NODE block io.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch removes redundant copied code in find_in_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch introduces to reuse the existing room_for_filename for inline dentry
operation.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds descriptions for the inline dir support in f2fs document.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Add inline dir functions into normal dir ops' function to handle inline ops.
Besides, we enable inline dir mode when a new dir inode is created if
inline_data option is on.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Adds Functions to implement inline dir init/lookup/insert/delete/convert ops.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch exports some dir operations for inline dir, additionally introduces
f2fs_drop_nlink from f2fs_delete_entry for reusing by inline dir function.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Adds a new mount option 'inline_dentry' for inline dir.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch defines macro/inline dentry structure, and adds some helpers for
inline dir infrastructure.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch avoids an infinite loop in sync_dirty_inode_page when -EIO was
detected.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>