- 27 Nov, 2018 40 commits
-
-
Aaro Koskinen authored
commit 82fba2df upstream. Re-enable OCTEON USB driver which is needed on older hardware (e.g. EdgeRouter Lite) for mass storage etc. This got accidentally deleted when config options were changed for OCTEON2/3 USB. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: f922bc0a ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers") Patchwork: https://patchwork.linux-mips.org/patch/21077/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.14+ Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sakari Ailus authored
commit 92539d3e upstream. Patch ad608fbc changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbc ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit a0e6e083 upstream modify_ldt(2) leaves the old LDT mapped after switching over to the new one. The old LDT gets freed and the pages can be re-used. Leaving the mapping in place can have security implications. The mapping is present in the userspace page tables and Meltdown-like attacks can read these freed and possibly reused pages. It's relatively simple to fix: unmap the old LDT and flush TLB before freeing the old LDT memory. This further allows to avoid flushing the TLB in map_ldt_struct() as the slot is unmapped and flushed by unmap_ldt_struct() or has never been mapped at all. [ tglx: Massaged changelog and removed the needless line breaks ] Fixes: f55f0501 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-3-kirill.shutemov@linux.intel.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Kirill A. Shutemov authored
commit d52888aa upstream On 5-level paging the LDT remap area is placed in the middle of the KASLR randomization region and it can overlap with the direct mapping, the vmalloc or the vmap area. The LDT mapping is per mm, so it cannot be moved into the P4D page table next to the CPU_ENTRY_AREA without complicating PGD table allocation for 5-level paging. The 4 PGD slot gap just before the direct mapping is reserved for hypervisors, so it cannot be used. Move the direct mapping one slot deeper and use the resulting gap for the LDT remap area. The resulting layout is the same for 4 and 5 level paging. [ tglx: Massaged changelog ] Fixes: f55f0501 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-2-kirill.shutemov@linux.intel.comSigned-off-by:
-
Adrian Hunter authored
commit f6c66d73 upstream. The "Object code reading" test will not create maps for the PTI entry trampolines unless the machine environment exists to show that the arch is x86_64. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by:
-
Adrian Hunter authored
commit 4d99e413 upstream. On x86_64 the PTI entry trampolines are not in the kernel map created by perf tools. That results in the addresses having no symbols and prevents annotation. It also causes Intel PT to have decoding errors at the trampoline addresses. Workaround that by creating maps for the trampolines. At present the kernel does not export information revealing where the trampolines are. Until that happens, the addresses are hardcoded. Signed-off-by:
-
Adrian Hunter authored
commit 9cecca32 upstream. Add a function to return the number of the machine's available CPUs. Signed-off-by:
-
Adrian Hunter authored
commit 19422a9f upstream. On x86_64, PTI entry trampolines are less than the start of kernel text, but still above 2^63. So leave kernel_start = 1ULL << 63 for x86_64. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1526548928-20790-7-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
commit dbbd34a6 upstream. Add a function to identify the machine architecture. Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 5a802a7a ] After we added quirk for Lenovo Z50-70 it turns out there are at least two more systems where WDAT table includes instructions accessing RTC SRAM. Instead of quirking each system separately, look for such instructions in the table and automatically prefer iTCO_wdt if found. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199033Reported-by:
Arnold Guy <aurnoldg@gmail.com> Reported-by:
Alois Nespor <nespor@fssp.cz> Reported-by:
Yury Pakin <zxwarior@gmail.com> Reported-by:
Ihor Chyhin <ihorchyhin@ukr.net> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 025911a5 ] There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Minchan Kim authored
commit fef912bf upstream. commit 98af4d4d upstream. I got a report from Howard Chen that he saw zram and sysfs race(ie, zram block device file is created but sysfs for it isn't yet) when he tried to create new zram devices via hotadd knob. v4.20 kernel fixes it by [1, 2] but it's too large size to merge into -stable so this patch fixes the problem by registering defualt group by Greg KH's approach[3]. This patch should be applied to every stable tree [3.16+] currently existing from kernel.org because the problem was introduced at 2.6.37 by [4]. [1] fef912bf, block: genhd: add 'groups' argument to device_add_disk [2] 98af4d4d, zram: register default groups with device_add_disk() [3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ [4] 33863c21, Staging: zram: Replace ioctls with sysfs interface Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Tested-by:
Howard Chen <howardsoc@google.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Thor Thayer authored
[ Upstream commit 8137b6ef ] Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a8372 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by:
Jose Abreu <jose.abreu@synopsys.com> Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sagiv Ozeri authored
[ Upstream commit fa5c448d ] A stuck ramrod should be deleted from the completion_pending list, otherwise it will be added again in the future and corrupt the list. Return error value to inform that ramrod is stuck and should be deleted. Signed-off-by:
Sagiv Ozeri <sagiv.ozeri@cavium.com> Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 2632f22e ] When there are no SPQ entries left in the free_pool, new entries are allocated and are added to the unlimited list. When an entry in the pool is available, the content is copied from the original entry, and the new entry is sent to the device. qed_spq_post() is not aware of that, so the additional entry is stored in the original entry as p_post_ent, which can later be returned to the pool. Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 39477551 ] Free the allocated SPQ entry or return the acquired SPQ entry to the free list in error flows. Signed-off-by:
-
Jacob Keller authored
[ Upstream commit ba766b8b ] Since commit bacd75cf ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318d ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df3 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Gustavo Romero authored
[ Upstream commit 6ac22262 ] Currently jvmti agent can not be used because function scnprintf is not present in the agent libperf-jvmti.so. As a result the JVM when using such agent to record JITed code profiling information will fail on looking up scnprintf: java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf This commit fixes that by reverting to the use of snprintf, that can be looked up, instead of scnprintf, adding a proper check for the returned value in order to print a better error message when the jitdump file pathname is too long. Checking the returned value also helps to comply with some recent gcc versions, like gcc8, which will fail due to truncated writing checks related to the -Werror=format-truncation= flag. Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Acked-by:
-
Valentin Schneider authored
[ Upstream commit 40fa3780 ] When running on linux-next (8c60c36d0b8c ("Add linux-next specific files for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g. Juno or HiKey960), we get the following report: [ 0.748225] Call trace: [ 0.750685] lockdep_assert_cpus_held+0x30/0x40 [ 0.755236] static_key_enable_cpuslocked+0x20/0xc8 [ 0.760137] build_sched_domains+0x1034/0x1108 [ 0.764601] sched_init_domains+0x68/0x90 [ 0.768628] sched_init_smp+0x30/0x80 [ 0.772309] kernel_init_freeable+0x278/0x51c [ 0.776685] kernel_init+0x10/0x108 [ 0.780190] ret_from_fork+0x10/0x18 The static_key in question is 'sched_asym_cpucapacity' introduced by commit: df054e84 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations") In this particular case, we enable it because smp_prepare_cpus() will end up fetching the capacity-dmips-mhz entry from the devicetree, so we already have some asymmetry detected when entering sched_init_smp(). This didn't get detected in tip/sched/core because we were missing: commit cb538267 ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") Calls to build_sched_domains() post sched_init_smp() will hold the hotplug lock, it just so happens that this very first call is a special case. As stated by a comment in sched_init_smp(), "There's no userspace yet to cause hotplug operations" so this is a harmless warning. However, to both respect the semantics of underlying callees and make lockdep happy, take the hotplug lock in sched_init_smp(). This also satisfies the comment atop sched_init_domains() that says "Callers must hold the hotplug lock". Reported-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: morten.rasmussen@arm.com Cc: quentin.perret@arm.com Link: http://lkml.kernel.org/r/1540301851-3048-1-git-send-email-valentin.schneider@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 0bb2ae1b ] The function perf_init_event() creates a new event and assignes it to a PMU. This a done in a loop over all existing PMUs. For each listed PMU the event init function is called and if this function does return any other error than -ENOENT, the loop is terminated the creation of the event fails. If the event is invalid, return -ENOENT to try other PMUs. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jeremy Linton authored
[ Upstream commit 313a06e6 ] The lib/raid6/test fails to build the neon objects on arm64 because the correct machine type is 'aarch64'. Once this is correctly enabled, the neon recovery objects need to be added to the build. Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
[ Upstream commit f98e8a57 ] When the fixed factor clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Reported-by:
Alan Tull <atull@kernel.org> Fixes: 971451b3 ("clk: fixed-factor: Convert into a module platform driver") Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Inki Dae authored
[ Upstream commit 6ca469e2 ] This reverts commit 0586feba This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit e3e61f01 ] If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit bd74a7f9 ] Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29c ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 54451f60 ] When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469 ("netfilter: xtables: idletimer target implementation") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jozsef Kadlecsik authored
[ Upstream commit 17b8b74c ] The function is called when rcu_read_lock() is held and not when rcu_read_lock_bh() is held. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Justin M. Forbes authored
[ Upstream commit a541f0eb ] Fixes: ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1275: modules] Error 2 + exit 1 Signed-off-by:
Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Eric Westbrook authored
[ Upstream commit 886503f3 ] Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9cSigned-off-by:
Eric Westbrook <linux@westbrook.io> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 439cd39e ] Commit 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") postponed decreasing set reference counters to the RCU callback. An 'ipset del' command can terminate before the RCU grace period is elapsed, and if sets are listed before then, the reference counter shown in userspace will be wrong: # ipset create h hash:ip; ipset create l list:set; ipset add l # ipset del l h; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 1 Number of entries: 0 Members: # sleep 1; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 0 Number of entries: 0 Members: Fix this by making the reference count update synchronous again. As a result, when sets are listed, ip_set_name_byindex() might now fetch a set whose reference count is already zero. Instead of relying on the reference count to protect against concurrent set renaming, grab ip_set_ref_lock as reader and copy the name, while holding the same lock in ip_set_rename() as writer instead. Reported-by:
Li Shuang <shuali@redhat.com> Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit b44b136a ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit b5bb4258 ] Clang warns that if the default case is taken, ret will be uninitialized. ./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ ./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs here return ret; ^~~ ./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable 'ret' to silence this warning unsigned long ret, loop; ^ = 0 This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Paul Gortmaker authored
[ Upstream commit 684238d7 ] To fix: acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting! As can be seen in the context, the BIOS registers haven't changed in the previous versions, so the assumption is they won't have changed in this last update for this somewhat older platform either. Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Peter Feuerer <peter@piie.net> Signed-off-by:
-
Feng Tang authored
[ Upstream commit d2266bbf ] The "pciserial" earlyprintk variant helps much on many modern x86 platforms, but unfortunately there are still some platforms with PCI UART devices which have the wrong PCI class code. In that case, the current class code check does not allow for them to be used for logging. Add a sub-option "force" which overrides the class code check and thus the use of such device can be enforced. [ bp: massage formulations. ] Suggested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Stuart R . Anderson" <stuart.r.anderson@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thymo van Beers <thymovanbeers@gmail.com> Cc: alan@linux.intel.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20181002164921.25833-1-feng.tang@intel.comSigned-off-by:
-
Zubin Mithra authored
[ Upstream commit 250f2da4 ] Syzkaller reported a OOB-read with the stacktrace below. This occurs inside __aa_lookupn_ns as `n` is not initialized. `n` is obtained from aa_splitn_fqname. In cases where `name` is invalid, aa_splitn_fqname returns without initializing `ns_name` and `ns_len`. Fix this by always initializing `ns_name` and `ns_len`. __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 memcmp+0xe3/0x160 lib/string.c:861 strnstr+0x4b/0x70 lib/string.c:934 __aa_lookupn_ns+0xc1/0x570 security/apparmor/policy_ns.c:209 aa_lookupn_ns+0x88/0x1e0 security/apparmor/policy_ns.c:240 aa_fqlookupn_profile+0x1b9/0x1010 security/apparmor/policy.c:468 fqlookupn_profile+0x80/0xc0 security/apparmor/label.c:1844 aa_label_strn_parse+0xa3a/0x1230 security/apparmor/label.c:1908 aa_label_parse+0x42/0x50 security/apparmor/label.c:1943 aa_change_profile+0x513/0x3510 security/apparmor/domain.c:1362 apparmor_setprocattr+0xaa4/0x1150 security/apparmor/lsm.c:658 security_setprocattr+0x66/0xc0 security/security.c:1298 proc_pid_attr_write+0x301/0x540 fs/proc/base.c:2555 __vfs_write+0x119/0x9f0 fs/read_write.c:485 vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3b0aaf58 ("apparmor: add lib fn to find the "split" for fqnames") Reported-by: syzbot+61e4b490d9d2da591b50@syzkaller.appspotmail.com Signed-off-by:
Zubin Mithra <zsm@chromium.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit b3322802 ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by:
-
Chengguang Xu authored
[ Upstream commit 515f1867 ] There are some cases can cause memory leak when parsing option 'osdname'. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David Miller authored
[ Upstream commit d6afa561 ] Using the sh_entsize for both values isn't correct. It happens to be correct on x86... For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT section. Signed-off-by:
-
Alan Tull authored
[ Upstream commit 52091c25 ] When the fixed rate clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Signed-off-by:
-
Rajneesh Bhardwaj authored
[ Upstream commit 8d98b1ef ] On some Goldmont based systems such as ASRock J3455M the BIOS may not enable the IPC1 device that provides access to the PMC and PUNIT. In such scenarios, the IOSS and PSS resources from the platform device can not be obtained and result in a invalid telemetry_plt_config which is an internal data structure that holds platform config and is maintained by the telemetry platform driver. This is also applicable to the platforms where the BIOS supports IPC1 device under debug configurations but IPC1 is disabled by user or the policy. This change allows user to know the reason for not seeing entries under /sys/kernel/debug/telemetry/* when there is no apparent failure at boot. Cc: Matt Turner <matt.turner@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779Acked-by:
Matt Turner <matt.turner@intel.com> Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by:
-
