* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: fix DRAM base and limit extraction masks, v2

This is a proper fix as a follow-up to 66216a7a and 916d11b2.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: Prevent PIO commands to be defered too long if traffic in progress.
  pata_sc1200: Fix crash on boot
  libata: fix internal command failure handling
  libata: fix PMP initialization
  sata_nv: make sure link is brough up online when skipping hardreset
  ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2
  ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets.
  pata_via: extend the rev_max for VT6330

Use excl_link when non NCQ commands are defered, to be sure they are processed
as soon as outstanding commands are completed. It prevents some commands to be
defered indifinitely when using a port multiplier.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The SC1200 needs a NULL terminator or it may cause a crash on boot.

Bug #14227

Also correct a bogus comment as the driver had serializing added so can run
dual port.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

When an internal command fails, it should be failed directly without
invoking EH.  In the original implemetation, this was accomplished by
letting internal command bypass failure handling in ata_qc_complete().
However, later changes added post-successful-completion handling to
that code path and the success path is no longer adequate as internal
command failure path.  One of the visible problems is that internal
command failure due to timeout or other freeze conditions would
spuriously trigger WARN_ON_ONCE() in the success path.

This patch updates failure path such that internal command failure
handling is contained there.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit 842faa6c fixed error handling
during attach by not committing detected device class to dev->class
while attaching a new device.  However, this change missed the PMP
class check in the configuration loop causing a new PMP device to go
through ata_dev_configure() as if it were an ATA or ATAPI device.

As PMP device doesn't have a regular IDENTIFY data, this makes
ata_dev_configure() tries to configure a PMP device using an invalid
data.  For the most part, it wasn't too harmful and went unnoticed but
this ends up clearing dev->flags which may have ATA_DFLAG_AN set by
sata_pmp_attach().  This means that SATA_PMP_FEAT_NOTIFY ends up being
disabled on PMPs and on PMPs which honor the flag breaks hotplug
support.

This problem was discovered and reported by Ethan Hsiao.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ethan Hsiao <ethanhsiao@jmicron.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

prereset doesn't bring link online if hardreset is about to happen and
nv_hardreset() may skip if conditions are not right so softreset may
be entered with non-working link status if the system firmware didn't
bring it up before entering OS code which can happen during resume.
This patch makes nv_hardreset() to bring up the link if it's skipping
reset.

This bug was reported by frodone@gmail.com in the following bug entry.

  http://bugzilla.kernel.org/show_bug.cgi?id=14329Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: frodone@gmail.com
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch renames the code name SB900 into Hudson-2
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Add the generic device ID for NVIDIA AHCI controller.
Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Fix the VT6330 issue, it's because the rev_max of VT6330 exceeds 0x2f.
The VT6415 and VT6330 share the same device ID.
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Update flex_arrays.txt

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix socket fd translation
  dlm: fix lowcomms_connect_node for sctp

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: linker script syntax nits"
  x86, perf_event: Rename 'performance counter interrupt'

The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically).  This is passed in the request_key_auth struct as
the dest_keyring member.

keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation.  This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key().  In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.

The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed.  The effect may take some time to
show up as the key is destroyed lazily.

To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.

This can be tested by setting /etc/request-key.conf to:

#OP	TYPE	DESCRIPTION	CALLOUT INFO	PROGRAM ARG1 ARG2 ARG3 ...
#======	=======	===============	===============	===============================
create  *	test:*		*		|/bin/false %u %g %d %{user:_display}
negate	*	*		*		/bin/keyctl negate %k 10 @u

and then doing:

	keyctl add user _display aaaaaaaa @u
        while keyctl request2 user test:x test:x @u &&
        keyctl list @u;
        do
                keyctl request2 user test:x test:x @u;
                sleep 31;
                keyctl list @u;
        done

which will oops eventually.  Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.
Reported-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Fix MODPOST warning
  powerpc/oprofile: Add ppc750 CL as supported by oprofile
  powerpc: warning: allocated section `.data_nosave' not in segment
  powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
  powerpc: Fix hypervisor TLB batching
  powerpc/mm: Fix hang accessing top of vmalloc space
  powerpc: Fix memory leak in axon_msi.c
  powerpc/pmac: Fix issues with sleep on some powerbooks
  powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
  powerpc/ftrace: show real return addresses in modules

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI button: don't try to use a non-existent lid device
  ACPI: video: Loosen strictness of video bus detection code
  eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
  eeepc-laptop: Properly annote eeepc_enable_camera().
  ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
  fujitsu-laptop: address missed led-class ifdef fixup
  ACPI: Kconfig, fix proc aggregator text
  ACPI: add AC/DC notifier

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2xxx clock: set up clockdomain pointer in struct clk
  OMAP: Fix race condition with autodeps
  omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
  omap: Initialization of SDRC params on Zoom2
  omap: RX-51: Drop I2C-1 speed to 2200
  omap: SDMA: Fixing bug in omap_dma_set_global_params()
  omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: always pin metadata in discard mode
  Btrfs: enable discard support
  Btrfs: add -o discard option
  Btrfs: properly wait log writers during log sync
  Btrfs: fix possible ENOSPC problems with truncate
  Btrfs: fix btrfs acl #ifdef checks
  Btrfs: streamline tree-log btree block writeout
  Btrfs: avoid tree log commit when there are no changes
  Btrfs: only write one super copy during fsync

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: fix vt_compat_ioctl

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
  sysfs: Allow sysfs_move_dir(..., NULL) again.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: Fix EEM driver comments and VID/PID
  usb-storage: Workaround devices with bogus sense size
  USB: ehci: Fix IST boundary checking interval math.
  USB: option: Support for AIRPLUS MCD650 Datacard
  USB: whci-hcd: always do an update after processing a halted qTD
  USB: whci-hcd: handle early deletion of endpoints
  USB: wusb: don't use the stack to read security descriptor
  USB: rename Documentation/ABI/.../sysfs-class-usb_host

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rt2860sta: prevent a panic when disabling when associated
  staging: more sched.h fixes
  Staging: et131x: Fix the add_10bit macro
  Staging: et131x: Correct WRAP bit handling
  staging: Complete sched.h removal from interrupt.h
  Staging: vme: fix sched.h build breakage
  Staging: poch: fix sched.h build breakage
  Staging: b3dfg: fix sched.h build breakage
  Staging: comedi: fix sched.h build breakage
  Staging: iio: Fix missing include <linux/sched.h>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits)
  vmxnet: fix 2 build problems
  net: add support for STMicroelectronics Ethernet controllers.
  net: ks8851_mll uses mii interfaces
  net/fec_mpc52xx: Fix kernel panic on FEC error
  net: Fix OF platform drivers coldplug/hotplug when compiled as modules
  TI DaVinci EMAC: Clear statistics register properly.
  r8169: partial support and phy init for the 8168d
  irda/sa1100_ir: check return value of startup hook
  udp: Fix udp_poll() and ioctl()
  WAN: fix Cisco HDLC handshaking.
  tcp: fix tcp_defer_accept to consider the timeout
  3c574_cs: spin_lock the set_multicast_list function
  net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs
  netxen: fix pci bar mapping
  ethoc: fix warning from 32bit build
  libertas: fix build
  net: VMware virtual Ethernet NIC driver: vmxnet3
  net: Fix IXP 2000 network driver building.
  libertas: fix build
  mac80211: document ieee80211_rx() context requirement
  ...

* branch 'tty-fixes'
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  tty: Make flush_to_ldisc() locking more robust

The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This reverts commit e9a63a4e.

This breaks older binutils, where sink-less asserts are broken.

See this commit for further details:

  d2ba8b21: x86: Fix assert syntax in vmlinux.lds.S
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AD6523D.5030909@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: pull in latest, to be able to revert a patch there.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.

vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'

drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bhavesh davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call compat_unimap_ioctl, not do_unimap_ioctl.

This was broken by commit e9216651.

The compat_unimap_ioctl was originally called do_unimap_ioctl in
fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c.
In that patch, the caller was not updated and consequently called
the native handler.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>

There is a possible race condition in clockdomain
code handling hw supported idle transitions.

When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.

Fixed by disabling hw supported state transitions
when autodeps are being changed.
Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
  ieee1394: add documentation entry to MAINTAINERS
  ieee1394: update URLs in debugging-via-ohci1394.txt