- 10 Aug, 2015 23 commits
-
-
Alexander Popov authored
commit 5d5aa3cf upstream. Currently KASAN shadow region page tables created without respect of physical offset (phys_base). This causes kernel halt when phys_base is not zero. So let's initialize KASAN shadow region page tables in kasan_early_init() using __pa_nodebug() which considers phys_base. This patch also separates x86_64_start_kernel() from KASAN low level details by moving kasan_map_early_shadow(init_level4_pgt) into kasan_early_init(). Remove the comment before clear_bss() which stopped bringing much profit to the code readability. Otherwise describing all the new order dependencies would be too verbose. Signed-off-by:
Alexander Popov <alpopov@ptsecurity.com> Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-3-git-send-email-a.ryabinin@samsung.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Ryabinin authored
commit d0f77d4d upstream. Currently x86_64_start_kernel() has two KASAN related function calls. The first call maps shadow to early_level4_pgt, the second maps shadow to init_level4_pgt. If we move clear_page(init_level4_pgt) earlier, we could hide KASAN low level detail from generic x86_64 initialization code. The next patch will do it. Signed-off-by:
-
Al Viro authored
commit 75a6f82a upstream. Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Acked-by:
J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Stefan Agner authored
commit 25b401c1 upstream. If a valid power regulator or a dummy regulator is used (which happens to be the case when no regulator is specified), restart_work is queued no matter whether the device was running or not at suspend time. Since work queues get initialized in the ndo_open callback, resuming leads to a NULL pointer exception. Reverse exactly the steps executed at suspend time: - Enable the power regulator in any case - Enable the transceiver regulator if the device was running, even in case we have a power regulator - Queue restart_work only in case the device was running Fixes: bf66f373 ("can: mcp251x: Move to threaded interrupts instead of workqueues.") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Sergei Shtylyov authored
commit c1a4c87b upstream. Printing IRQ # using "%x" and "%u" unsigned formats isn't quite correct as 'ndev->irq' is of type *int*, so the "%d" format needs to be used instead. While fixing this, beautify the dev_info() message in rcar_can_probe() a bit. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
J.D. Schroeder authored
commit 03336519 upstream. The previous change 3973c526 (net: can: c_can: Disable pins when CAN interface is down) causes a slight glitch on the pinctrl settings when used. Since commit ab78029e (drivers/pinctrl: grab default handles from device core), the device core will automatically set the default pins. This causes the pins to be momentarily set to the default and then to the sleep state in register_c_can_dev(). By adding an optional "enable" state, boards can set the default pin state to be disabled and avoid the glitch when the switch from default to sleep first occurs. If the "enable" state is not available c_can_pinctrl_select_state() falls back to using the "default" pinctrl state. [Roger Q] - Forward port to v4.2 and use pinctrl_get_select(). Signed-off-by:
J.D. Schroeder <jay.schroeder@garmin.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Sergei Shtylyov authored
commit 5e63e6ba upstream. rcar_can_probe() regards 0 as a wrong IRQ #, despite platform_get_irq() that it calls returns negative error code in that case. This leads to the following being printed to the console when attempting to open the device: error requesting interrupt fffffffa because rcar_can_open() calls request_irq() with a negative IRQ #, and that function naturally fails with -EINVAL. Check for the negative error codes instead and propagate them upstream instead of just returning -ENODEV. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
-
Oliver Hartkopp authored
commit d3b58c47 upstream. Commit 514ac99c "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. Without timestamping to be required by user space applications this timestamp was not generated which lead to commit 36c01245 "can: fix loss of CAN frames in raw_rcv" - which forces the timestamp to be set in all CAN related skbuffs by introducing several __net_timestamp() calls. This forces e.g. out of tree drivers which are not using alloc_can{,fd}_skb() to add __net_timestamp() after skbuff creation to prevent the frame loss fixed in mainline Linux. This patch removes the timestamp dependency and uses an atomic counter to create an unique identifier together with the skbuff pointer. Btw: the new skbcnt element introduced in struct can_skb_priv has to be initialized with zero in out-of-tree drivers which are not using alloc_can{,fd}_skb() too. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Markos Chandras authored
commit fcc53b5f upstream. Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit 4e9d324d upstream. MIPS32r6 code requires FP64 (ie. FR=1) support. Building a kernel with support for MIPS32r6 binaries but without support for O32 with FP64 is therefore a problem which can lead to incorrectly executed userland. CONFIG_MIPS_O32_FP64_SUPPORT is already selected when the kernel is configured for MIPS32r6, but not when the kernel is configured for MIPS64r6 with O32 compat support. Select CONFIG_MIPS_O32_FP64_SUPPORT in such configurations to prevent building kernels which execute MIPS32r6 userland incorrectly. Signed-off-by:
-
Markos Chandras authored
commit cccf34e9 upstream. MT_SMP is not the only SMP option for MT cores. The MT_SMP option allows more than one VPE per core to appear as a secondary CPU in the system. Because of how CM works, it propagates the address-based cache ops to the secondary cores but not the index-based ones. Because of that, the code does not use IPIs to flush the L1 caches on secondary cores because the CM would have done that already. However, the CM functionality is independent of the type of SMP kernel so even in non-MT kernels, IPIs are not necessary. As a result of which, we change the conditional to depend on the CM presence. Moreover, since VPEs on the same core share the same L1 caches, there is no need to send an IPI on all of them so we calculate a suitable cpumask with only one VPE per core. Signed-off-by:
-
Markos Chandras authored
commit 143fefc8 upstream. Commit 5f9f41c4 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") added support for emulating the JR instruction on MIPS R6 cores but that introduced a bug which could be triggered when hitting a JALR opcode because the code used the wrong field in the 'r_format' struct to determine the instruction opcode. This lead to crashes because an emulated JALR instruction was treated as a JR one when the R6 emulator was turned off. Fixes: 5f9f41c4 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") Signed-off-by:
-
Lucas Stach authored
commit d438462c upstream. If CONFIG_PM is not set the PU power domain needs to be enabled always, otherwise there are two failure scenarios which will hang the system if one of the devices in the PU domain is accessed. 1. New DTs (4.1+) drop the "always-on" property from the PU regulator, so if it isn't properly enabled by the GPC code it will be disabled at the end of boot. 2. If the bootloader already disabled the PU domain the GPC explicitly needs to enable it again, even if the kernel doesn't do any power management. This is a bit hypothetical, as it requires to boot a mainline kernel on a downstream bootloader, as no mainline bootloader disables the PM domains. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Marek Szyprowski authored
commit 462859aa upstream. nr_bitmaps member of mapping structure stores the number of already allocated bitmaps and it is interpreted as loop iterator (it starts from 0 not from 1), so a comparison against number of possible bitmap extensions should include this fact. This patch fixes this by changing the extension failure condition. This issue has been introduced by commit 4d852ef8 ("arm: dma-mapping: Add support to extend DMA IOMMU mappings"). Reported-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Roger Quadros authored
commit 9ab402ae upstream. Without this USB2 breaks if USB1 is disabled or USB1 initializes after USB2 e.g. due to deferred probing. Fixes: 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Roger Quadros authored
commit 2acb5c30 upstream. Driver core sets "default" pinmux on on probe and CAN driver sets "sleep" pinmux during register. This causes a small window where the CAN pins are in "default" state with the DCAN module being disabled. Change the "default" state to be like sleep so this glitch is avoided. Add a new "active" state that is used by the driver when CAN is actually active. Signed-off-by:
-
Robert Jarzmik authored
commit a927ef89 upstream. Since dm9000 driver added support for a vcc regulator, platform data based platforms have their ethernet broken, as the regulator claiming returns -EPROBE_DEFER and prevents dm9000 loading. This patch fixes this for all pxa boards using dm9000, by using the specific regulator_has_full_constraints() function. This was discovered and tested on the cm-x300 board. Fixes: 7994fe55 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
-
Christophe Jaillet authored
commit 4c4ac9a4 upstream. Commit 0e0da48d ("parisc: mm: don't count preallocated pmds") introduced a memory leak. After this commit, the 'return' statement in pmd_free is executed in all cases. Even for pmd that are not attached to the pgd. So 'free_pages' can never be called anymore, leading to a memory leak. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
commit 01ab6057 upstream. The increased use of pdtlb/pitlb instructions seemed to increase the frequency of random segmentation faults building packages. Further, we had a number of cases where TLB inserts would repeatedly fail and all forward progress would stop. The Haskell ghc package caused a lot of trouble in this area. The final indication of a race in pte handling was this syslog entry on sibaris (C8000): swap_free: Unused swap offset entry 00000004 BUG: Bad page map in process mysqld pte:00000100 pmd:019bbec5 addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464 CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1 Backtrace: [<0000000040173eb0>] show_stack+0x20/0x38 [<0000000040444424>] dump_stack+0x9c/0x110 [<00000000402a0d38>] print_bad_pte+0x1a8/0x278 [<00000000402a28b8>] unmap_single_vma+0x3d8/0x770 [<00000000402a4090>] zap_page_range+0xf0/0x198 [<00000000402ba2a4>] SyS_madvise+0x404/0x8c0 Note that the pte value is 0 except for the accessed bit 0x100. This bit shouldn't be set without the present bit. It should be noted that the madvise system call is probably a trigger for many of the random segmentation faults. In looking at the kernel code, I found the following problems: 1) The pte_clear define didn't take TLB lock when clearing a pte. 2) We didn't test pte present bit inside lock in exception support. 3) The pte and tlb locks needed to merged in order to ensure consistency between page table and TLB. This also has the effect of serializing TLB broadcasts on SMP systems. The attached change implements the above and a few other tweaks to try to improve performance. Based on the timing code, TLB purges are very slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it beneficial to test the split_tlb variable to avoid duplicate purges. Probably, all PA 2.0 machines have combined TLBs. I dropped using __flush_tlb_range in flush_tlb_mm as I realized all applications and most threads have a stack size that is too large to make this useful. I added some comments to this effect. Since implementing 1 through 3, I haven't had any random segmentation faults on mx3210 (rp3440) in about one week of building code and running as a Debian buildd. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Dmitry Torokhov authored
commit dbf3c370 upstream. This reverts commit 63c4fda3 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Shreyas B. Prabhu authored
commit b32aadc1 upstream. core_idle_state is maintained for each core. It uses 0-7 bits to track whether a thread in the core has entered fastsleep or winkle. 8th bit is used as a lock bit. The lock bit is set in these 2 scenarios- - The thread is first in subcore to wakeup from sleep/winkle. - If its the last thread in the core about to enter sleep/winkle While the lock bit is set, if any other thread in the core wakes up, it loops until the lock bit is cleared before proceeding in the wakeup path. This helps prevent race conditions w.r.t fastsleep workaround and prevents threads from switching to process context before core/subcore resources are restored. But, in the path to sleep/winkle entry, we currently don't check for lock-bit. This exposes us to following race when running with subcore on- First thread in the subcorea Another thread in the same waking up core entering sleep/winkle lwarx r15,0,r14 ori r15,r15,PNV_CORE_IDLE_LOCK_BIT stwcx. r15,0,r14 [Code to restore subcore state] lwarx r15,0,r14 [clear thread bit] stwcx. r15,0,r14 andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS stw r15,0(r14) Here, after the thread entering sleep clears its thread bit in core_idle_state, the value is overwritten by the thread waking up. In such cases when the core enters fastsleep, code mistakes an idle thread as running. Because of this, the first thread waking up from fastsleep which is supposed to resync timebase skips it. So we can end up having a core with stale timebase value. This patch fixes the above race by looping on the lock bit even while entering the idle states. Signed-off-by:
Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Fixes: 7b54e9f213f76 'powernv/powerpc: Add winkle support for offline cpus' Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Daniel Axtens authored
commit 2c069a11 upstream. The pointer to an AFU in the adapter's list of AFUs can be null if we're in the process of removing AFUs. The afu_list_lock doesn't guard against this. Say we have 2 slices, and we're in the process of removing cxl. - We remove the AFUs in order (see cxl_remove). In cxl_remove_afu for AFU 0, we take the lock, set adapter->afu[0] = NULL, and release the lock. - Then we get an slbia. In cxl_slbia we take the lock, and set afu = adapter->afu[0], which is NULL. - Therefore our attempt to check afu->enabled will blow up. Therefore, check if afu is a null pointer before dereferencing it. Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Ian Munsie authored
commit 10a5894f upstream. It was discovered that if a process mmaped their problem state area they were able to access one page more than expected, potentially allowing them to access the problem state area of an unrelated process. This was due to a simple off by one error in the mmap fault handler introduced in 0712dc7e ("cxl: Fix issues when unmapping contexts"), which is fixed in this patch. Fixes: 0712dc7e ("cxl: Fix issues when unmapping contexts") Signed-off-by:
-
- 03 Aug, 2015 17 commits
-
-
Greg Kroah-Hartman authored
-
Kirill A. Shutemov authored
commit a8965276 upstream. MPX setups private anonymous mapping, but uses vma->vm_ops too. This can confuse core VM, as it relies on vm->vm_ops to distinguish file VMAs from anonymous. As result we will get SIGBUS, because handle_pte_fault() thinks it's file VMA without vm_ops->fault and it doesn't know how to handle the situation properly. Let's fix that by not setting ->vm_ops. We don't really need ->vm_ops here: MPX VMA can be detected with VM_MPX flag. And vma_merge() will not merge MPX VMA with non-MPX VMA, because ->vm_flags won't match. The only thing left is name of VMA. I'm not sure if it's part of ABI, or we can just drop it. The patch keep it by providing arch_vma_name() on x86. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@sr71.net Link: http://lkml.kernel.org/r/20150720212958.305CC3E9@viggo.jf.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
commit 6b7339f4 upstream. Reading page fault handler code I've noticed that under right circumstances kernel would map anonymous pages into file mappings: if the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated on ->mmap(), kernel would handle page fault to not populated pte with do_anonymous_page(). Let's change page fault handler to use do_anonymous_page() only on anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not shared. For file mappings without vm_ops->fault() or shred VMA without vm_ops, page fault on pte_none() entry would lead to SIGBUS. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 6f957724 upstream. The firmware class uevent function accessed the "fw_priv->buf" buffer without the proper locking and testing for NULL. This is an old bug (looks like it goes back to 2012 and commit 1244691c: "firmware loader: introduce firmware_buf"), but for some reason it's triggering only now in 4.2-rc1. Shuah Khan is trying to bisect what it is that causes this to trigger more easily, but in the meantime let's just fix the bug since others are hitting it too (at least Ingo reports having seen it as well). Reported-and-tested-by:
Shuah Khan <shuahkh@osg.samsung.com> Acked-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Joe Perches authored
commit a28e4b2b upstream. Removing unnecessary static buffers is good. Use the vsprintf %pV extension instead. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Mikulas Patocka <mikulas@twibright.com> Signed-off-by:
-
Sanidhya Kashyap authored
commit ce657611 upstream. There is a possibility of nothing being allocated to the new_opts in case of memory pressure, therefore return ENOMEM for such case. Signed-off-by:
Sanidhya Kashyap <sanidhya.gatech@gmail.com> Signed-off-by:
-
Szabolcs Nagy authored
commit 13ee9fdb upstream. If the host toolchain is not glibc based then the arm kernel build fails with arch/arm/vdso/vdsomunge.c:53:19: fatal error: error.h: No such file or directory error.h is a glibc only header (ie not available in musl, newlib and bsd libcs). Changed the error reporting to standard conforming code to avoid depending on specific C implementations. Signed-off-by:
Szabolcs Nagy <szabolcs.nagy@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Fixes: 8512287a ("ARM: 8330/1: add VDSO user-space code") Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by:
-
Stephen Boyd authored
commit 398f7456 upstream. John Stultz reports an RCU splat on boot with ARM ipi trace events enabled. =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-00033-gb5bed2f #153 Not tainted ------------------------------- include/trace/events/ipi.h:68 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-rc7-00033-gb5bed2f #153 Hardware name: Qualcomm (Flattened Device Tree) [<c0216b08>] (unwind_backtrace) from [<c02136e8>] (show_stack+0x10/0x14) [<c02136e8>] (show_stack) from [<c075e678>] (dump_stack+0x70/0xbc) [<c075e678>] (dump_stack) from [<c0215a80>] (handle_IPI+0x428/0x604) [<c0215a80>] (handle_IPI) from [<c020942c>] (gic_handle_irq+0x54/0x5c) [<c020942c>] (gic_handle_irq) from [<c0766604>] (__irq_svc+0x44/0x7c) Exception stack(0xc09f3f48 to 0xc09f3f90) 3f40: 00000001 00000001 00000000 c09f73b8 c09f4528 c0a5de9c 3f60: c076b4f0 00000000 00000000 c09ef108 c0a5cec1 00000001 00000000 c09f3f90 3f80: c026bf60 c0210ab8 20000113 ffffffff [<c0766604>] (__irq_svc) from [<c0210ab8>] (arch_cpu_idle+0x20/0x3c) [<c0210ab8>] (arch_cpu_idle) from [<c02647f0>] (cpu_startup_entry+0x2c0/0x5dc) [<c02647f0>] (cpu_startup_entry) from [<c099bc1c>] (start_kernel+0x358/0x3c4) [<c099bc1c>] (start_kernel) from [<8020807c>] (0x8020807c) At this point in the IPI handling path we haven't called irq_enter() yet, so RCU doesn't know that we're about to exit idle and properly warns that we're using RCU from an idle CPU. Use trace_ipi_entry_rcuidle() instead of trace_ipi_entry() so that RCU is informed about our exit from idle. Fixes: 365ec7b1 ("ARM: add IPI tracepoints") Reported-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Srikar Dronamraju authored
commit 2b42b09b upstream. With commit: e1e455f4 (perf tools: Work around lack of sched_getcpu in glibc < 2.6), perf_bench numa mem with -c or -m option is not able to correctly calculate convergence. With the above commit, sched_getcpu always seems to return -1. The intention of commit e1e455f4 was to add a sched_getcpu in glibc < 2.6. Hence keep the sched_getcpu definition under an ifdef. This regression happened occurred between v4.0 and v4.1 Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Christoffer Dall authored
commit fd28f5d4 upstream. The current pmd_huge() and pud_huge() functions simply check if the table bit is not set and reports the entries as huge in that case. This is counter-intuitive as a clear pmd/pud cannot also be a huge pmd/pud, and it is inconsistent with at least arm and x86. To prevent others from making the same mistake as me in looking at code that calls these functions and to fix an issue with KVM on arm64 that causes memory corruption due to incorrect page reference counting resulting from this mistake, let's change the behavior. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
Steve Capper <steve.capper@linaro.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Fixes: 084bd298 ("ARM64: mm: HugeTLB support.") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Xi Wang authored
commit d63903bb upstream. Upper bits should be zeroed in endianness conversion: - even when there's no need to change endianness (i.e., BPF_FROM_BE on big endian or BPF_FROM_LE on little endian); - after rev16. This patch fixes such bugs by emitting extra instructions to clear upper bits. Cc: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Fixes: e54bcde3 ("arm64: eBPF JIT compiler") Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Xi Wang authored
commit 8eee539d upstream. Problems occur when bpf_to or bpf_from has value prog->len - 1 (e.g., "Very long jump backwards" in test_bpf where the last instruction is a jump): since ctx->offset has length prog->len, ctx->offset[bpf_to + 1] or ctx->offset[bpf_from + 1] will cause an out-of-bounds read, leading to a bogus jump offset and kernel panic. This patch moves updating ctx->offset to after calling build_insn(), and changes indexing to use bpf_to and bpf_from without + 1. Fixes: e54bcde3 ("arm64: eBPF JIT compiler") Cc: Zi Shen Lim <zlim.lnx@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by:
-
Stephen Boyd authored
commit be081d9b upstream. John Stultz reported an RCU splat on ARM with ipi trace events enabled. It looks like the same problem exists on ARM64. At this point in the IPI handling path we haven't called irq_enter() yet, so RCU doesn't know that we're about to exit idle and properly warns that we're using RCU from an idle CPU. Use trace_ipi_entry_rcuidle() instead of trace_ipi_entry() so that RCU is informed about our exit from idle. Cc: John Stultz <john.stultz@linaro.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by:
-
Al Viro authored
commit 67e808fb upstream. Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Signed-off-by:
-
Aaro Koskinen authored
commit 75a15a78 upstream. Commit debe6a62 ("MIPS: OCTEON: Update octeon-model.h code for new SoCs.") renamed some SoC model helper functions, but forgot to update the EDAC drivers resulting in build failures. Fix that. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by:
David Daney <david.daney@cavium.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1435747132-10954-1-git-send-email-aaro.koskinen@nokia.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Russell King authored
commit 5d6bed2a upstream. v3.18 changed handle_IRQ() to call __handle_domain_irq(), which now rejects attempts to deliver IRQ0. Since IRQ 0 is used as the timer interrupt (just like the PIT on x86), this causes boot to fail as the bogomips calibration never completes. Fix this by shuffling all interrupts up by one. Fixes: a71b092a ("ARM: Convert handle_IRQ to use __handle_domain_irq") Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Chris Wilson authored
commit 8b572a42 upstream. In needs_ilk_vtd_wa(), we pass in the GPU device but compared it against the ids for the mobile GPU and the mobile host bridge. That latter is impossible and so likely was just a typo for the desktop GPU device id (which is also buggy). Fixes commit da88a5f7 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Feb 13 09:31:53 2013 +0000 drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK Reported-by:
Ting-Wei Lan <lantw44@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91127 References: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
