The client will currently try LAYOUTGETs forever if a server is returning
NFS4ERR_LAYOUTTRYLATER or NFS4ERR_RECALLCONFLICT - even if the client no
longer needs the layout (ie process killed, unmounted).

This patch uses the DS timeout value (module parameter 'dataserver_timeo'
via rpc layer) to set an upper limit of how long the client tries LATOUTGETs
in this situation.  Once the timeout is reached, IO is redirected to the MDS.

This also changes how the client checks if a layout is on the clp list
to avoid a double list_add.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Returns the configured timeout for the xprt of the rpc client.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The client should have 60 second default timeouts for DS operations, not 6
seconds.

NFS4_DEF_DS_TIMEO is used as "timeout in tenths of a second" in
nfs_init_timeout_values (and is not used anywhere else).
This matches up with the description of the module param dataserver_timeo.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

If we don't release the open seqid before we wait for state recovery,
then we may end up deadlocking the state recovery thread.
This patch addresses a new deadlock that was introduced by
commit c21443c2 (NFSv4: Fix a reboot
recovery race when opening a file)
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Benny Halevy reported the following oops when testing RHEL6:

<7>nfs_update_inode: inode 892950 mode changed, 0040755 to 0100644
<1>BUG: unable to handle kernel NULL pointer dereference at (null)
<1>IP: [<ffffffffa02a52c5>] nfs_closedir+0x15/0x30 [nfs]
<4>PGD 81448a067 PUD 831632067 PMD 0
<4>Oops: 0000 [#1] SMP
<4>last sysfs file: /sys/kernel/mm/redhat_transparent_hugepage/enabled
<4>CPU 6
<4>Modules linked in: fuse bonding 8021q garp ebtable_nat ebtables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi softdog bridge stp llc xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_multiport iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 dm_round_robin dm_multipath objlayoutdriver2(U) nfs(U) lockd fscache auth_rpcgss nfs_acl sunrpc vhost_net macvtap macvlan tun kvm_intel kvm be2net igb dca ptp pps_core microcode serio_raw sg iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
<4>
<4>Pid: 6332, comm: dd Not tainted 2.6.32-358.el6.x86_64 #1 HP ProLiant DL170e G6  /ProLiant DL170e G6
<4>RIP: 0010:[<ffffffffa02a52c5>]  [<ffffffffa02a52c5>] nfs_closedir+0x15/0x30 [nfs]
<4>RSP: 0018:ffff88081458bb98  EFLAGS: 00010292
<4>RAX: ffffffffa02a52b0 RBX: 0000000000000000 RCX: 0000000000000003
<4>RDX: ffffffffa02e45a0 RSI: ffff88081440b300 RDI: ffff88082d5f5760
<4>RBP: ffff88081458bba8 R08: 0000000000000000 R09: 0000000000000000
<4>R10: 0000000000000772 R11: 0000000000400004 R12: 0000000040000008
<4>R13: ffff88082d5f5760 R14: ffff88082d6e8800 R15: ffff88082f12d780
<4>FS:  00007f728f37e700(0000) GS:ffff8800456c0000(0000) knlGS:0000000000000000
<4>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
<4>CR2: 0000000000000000 CR3: 0000000831279000 CR4: 00000000000007e0
<4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>Process dd (pid: 6332, threadinfo ffff88081458a000, task ffff88082fa0e040)
<4>Stack:
<4> 0000000040000008 ffff88081440b300 ffff88081458bbf8 ffffffff81182745
<4><d> ffff88082d5f5760 ffff88082d6e8800 ffff88081458bbf8 ffffffffffffffea
<4><d> ffff88082f12d780 ffff88082d6e8800 ffffffffa02a50a0 ffff88082d5f5760
<4>Call Trace:
<4> [<ffffffff81182745>] __fput+0xf5/0x210
<4> [<ffffffffa02a50a0>] ? do_open+0x0/0x20 [nfs]
<4> [<ffffffff81182885>] fput+0x25/0x30
<4> [<ffffffff8117e23e>] __dentry_open+0x27e/0x360
<4> [<ffffffff811c397a>] ? inotify_d_instantiate+0x2a/0x60
<4> [<ffffffff8117e4b9>] lookup_instantiate_filp+0x69/0x90
<4> [<ffffffffa02a6679>] nfs_intent_set_file+0x59/0x90 [nfs]
<4> [<ffffffffa02a686b>] nfs_atomic_lookup+0x1bb/0x310 [nfs]
<4> [<ffffffff8118e0c2>] __lookup_hash+0x102/0x160
<4> [<ffffffff81225052>] ? selinux_inode_permission+0x72/0xb0
<4> [<ffffffff8118e76a>] lookup_hash+0x3a/0x50
<4> [<ffffffff81192a4b>] do_filp_open+0x2eb/0xdd0
<4> [<ffffffff8104757c>] ? __do_page_fault+0x1ec/0x480
<4> [<ffffffff8119f562>] ? alloc_fd+0x92/0x160
<4> [<ffffffff8117de79>] do_sys_open+0x69/0x140
<4> [<ffffffff811811f6>] ? sys_lseek+0x66/0x80
<4> [<ffffffff8117df90>] sys_open+0x20/0x30
<4> [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
<4>Code: 65 48 8b 04 25 c8 cb 00 00 83 a8 44 e0 ff ff 01 5b 41 5c c9 c3 90 55 48 89 e5 53 48 83 ec 08 0f 1f 44 00 00 48 8b 9e a0 00 00 00 <48> 8b 3b e8 13 0c f7 ff 48 89 df e8 ab 3d ec e0 48 83 c4 08 31
<1>RIP  [<ffffffffa02a52c5>] nfs_closedir+0x15/0x30 [nfs]
<4> RSP <ffff88081458bb98>
<4>CR2: 0000000000000000

I think this is ultimately due to a bug on the server. The client had
previously found a directory dentry. It then later tried to do an atomic
open on a new (regular file) dentry. The attributes it got back had the
same filehandle as the previously found directory inode. It then tried
to put the filp because it failed the aops tests for O_DIRECT opens, and
oopsed here because the ctx was still NULL.

Obviously the root cause here is a server issue, but we can take steps
to mitigate this on the client. When nfs_fhget is called, we always know
what type of inode it is. In the event that there's a broken or
malicious server on the other end of the wire, the client can end up
crashing because the wrong ops are set on it.

Have nfs_find_actor check that the inode type is correct after checking
the fileid. The fileid check should rarely ever match, so it should only
rarely ever get to this check. In the case where we have a broken
server, we may see two different inodes with the same i_ino, but the
client should be able to cope with them without crashing.

This should fix the oops reported here:

    https://bugzilla.redhat.com/show_bug.cgi?id=913660Reported-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This fixes an oops where a LAYOUTGET is in still in the rpciod queue,
but the requesting processes has been killed.  Without this, killing
the process does the final pnfs_put_layout_hdr() and sets NFS_I(inode)->layout
to NULL while the LAYOUTGET rpc task still references it.

Example oops:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
IP: [<ffffffffa01bd586>] pnfs_choose_layoutget_stateid+0x37/0xef [nfsv4]
PGD 7365b067 PUD 7365d067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: nfs_layout_nfsv41_files nfsv4 auth_rpcgss nfs lockd sunrpc ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ip6table_filter ip6_tables ppdev e1000 i2c_piix4 i2c_core shpchp parport_pc parport crc32c_intel aesni_intel xts aes_x86_64 lrw gf128mul ablk_helper cryptd mptspi scsi_transport_spi mptscsih mptbase floppy autofs4
CPU 0
Pid: 27, comm: kworker/0:1 Not tainted 3.8.0-dros_cthon2013+ #4 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[<ffffffffa01bd586>]  [<ffffffffa01bd586>] pnfs_choose_layoutget_stateid+0x37/0xef [nfsv4]
RSP: 0018:ffff88007b0c1c88  EFLAGS: 00010246
RAX: ffff88006ed36678 RBX: 0000000000000000 RCX: 0000000ea877e3bc
RDX: ffff88007a729da8 RSI: 0000000000000000 RDI: ffff88007a72b958
RBP: ffff88007b0c1ca8 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007a72b958
R13: ffff88007a729da8 R14: 0000000000000000 R15: ffffffffa011077e
FS:  0000000000000000(0000) GS:ffff88007f600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000080 CR3: 00000000735f8000 CR4: 00000000001407f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kworker/0:1 (pid: 27, threadinfo ffff88007b0c0000, task ffff88007c2fa0c0)
Stack:
 ffff88006fc05388 ffff88007a72b908 ffff88007b240900 ffff88006fc05388
 ffff88007b0c1cd8 ffffffffa01a2170 ffff88007b240900 ffff88007b240900
 ffff88007b240970 ffffffffa011077e ffff88007b0c1ce8 ffffffffa0110791
Call Trace:
 [<ffffffffa01a2170>] nfs4_layoutget_prepare+0x7b/0x92 [nfsv4]
 [<ffffffffa011077e>] ? __rpc_atrun+0x15/0x15 [sunrpc]
 [<ffffffffa0110791>] rpc_prepare_task+0x13/0x15 [sunrpc]
Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Pass the directio request on pageio_init to clean up the API.

Percolate pg_dreq from original nfs_pageio_descriptor to the
pnfs_{read,write}_done_resend_to_mds and use it on respective
call to nfs_pageio_init_{read,write} on the newly created
nfs_pageio_descriptor.

Reproduced by command:
 mount -o vers=4.1 server:/ /mnt
 dd bs=128k count=8 if=/dev/zero of=/mnt/dd.out oflag=direct

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs]
PGD 34786067 PUD 34794067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: nfs_layout_nfsv41_files nfsv4 nfs nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc btrfs zlib_deflate libcrc32c ipv6 autofs4
CPU 1
Pid: 259, comm: kworker/1:2 Not tainted 3.8.0-rc6 #2 Bochs Bochs
RIP: 0010:[<ffffffffa021a3a8>]  [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs]
RSP: 0018:ffff880038f8fa68  EFLAGS: 00010206
RAX: ffffffffa021a6a9 RBX: ffff880038f8fb48 RCX: 00000000000a0000
RDX: ffffffffa021e616 RSI: ffff8800385e9a40 RDI: 0000000000000028
RBP: ffff880038f8fa68 R08: ffffffff81ad6720 R09: ffff8800385e9510
R10: ffffffffa0228450 R11: ffff880038e87418 R12: ffff8800385e9a40
R13: ffff8800385e9a70 R14: ffff880038f8fb38 R15: ffffffffa0148878
FS:  0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000028 CR3: 0000000034789000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kworker/1:2 (pid: 259, threadinfo ffff880038f8e000, task ffff880038302480)
Stack:
 ffff880038f8fa78 ffffffffa021a6bf ffff880038f8fa88 ffffffffa021bb82
 ffff880038f8fae8 ffffffffa021f454 ffff880038f8fae8 ffffffff8109689d
 ffff880038f8fab8 ffffffff00000006 0000000000000000 ffff880038f8fb48
Call Trace:
 [<ffffffffa021a6bf>] nfs_direct_pgio_init+0x16/0x18 [nfs]
 [<ffffffffa021bb82>] nfs_pgheader_init+0x6a/0x6c [nfs]
 [<ffffffffa021f454>] nfs_generic_pg_writepages+0x51/0xf8 [nfs]
 [<ffffffff8109689d>] ? mark_held_locks+0x71/0x99
 [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc]
 [<ffffffffa021bc25>] nfs_pageio_doio+0x1a/0x43 [nfs]
 [<ffffffffa021be7c>] nfs_pageio_complete+0x16/0x2c [nfs]
 [<ffffffffa02608be>] pnfs_write_done_resend_to_mds+0x95/0xc5 [nfsv4]
 [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc]
 [<ffffffffa028e27f>] filelayout_reset_write+0x8c/0x99 [nfs_layout_nfsv41_files]
 [<ffffffffa028e5f9>] filelayout_write_done_cb+0x4d/0xc1 [nfs_layout_nfsv41_files]
 [<ffffffffa024587a>] nfs4_write_done+0x36/0x49 [nfsv4]
 [<ffffffffa021f996>] nfs_writeback_done+0x53/0x1cc [nfs]
 [<ffffffffa021fb1d>] nfs_writeback_done_common+0xe/0x10 [nfs]
 [<ffffffffa028e03d>] filelayout_write_call_done+0x28/0x2a [nfs_layout_nfsv41_files]
 [<ffffffffa01488a1>] rpc_exit_task+0x29/0x87 [sunrpc]
 [<ffffffffa014a0c9>] __rpc_execute+0x11d/0x3cc [sunrpc]
 [<ffffffff810969dc>] ? trace_hardirqs_on_caller+0x117/0x173
 [<ffffffffa014a39f>] rpc_async_schedule+0x27/0x32 [sunrpc]
 [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc]
 [<ffffffff8105f8c1>] process_one_work+0x226/0x422
 [<ffffffff8105f7f4>] ? process_one_work+0x159/0x422
 [<ffffffff81094757>] ? lock_acquired+0x210/0x249
 [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc]
 [<ffffffff810600d8>] worker_thread+0x126/0x1c4
 [<ffffffff8105ffb2>] ? manage_workers+0x240/0x240
 [<ffffffff81064ef8>] kthread+0xb1/0xb9
 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65
 [<ffffffff815206ec>] ret_from_fork+0x7c/0xb0
 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65
Code: 00 83 38 02 74 12 48 81 4b 50 00 00 01 00 c7 83 60 07 00 00 01 00 00 00 48 89 df e8 55 fe ff ff 5b 41 5c 5d c3 66 90 55 48 89 e5 <f0> ff 07 5d c3 55 48 89 e5 f0 ff 0f 0f 94 c0 84 c0 0f 95 c0 0f
RIP  [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs]
 RSP <ffff880038f8fa68>
CR2: 0000000000000028
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [>= 3.6]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

If the socket is full, we're better off just waiting until it empties,
or until the connection is broken. The reason why we generally don't
want to time out is that the call to xprt->ops->release_xprt() will
trigger a connection reset, which isn't helpful...

Let's make an exception for soft RPC calls, since they have to provide
timeout guarantees.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Commit 73ca1001 broke the code that prevents the client from deleting
a silly renamed dentry.  This affected "delete on last close"
semantics as after that commit, nothing prevented removal of
silly-renamed files.  As a result, a process holding a file open
could easily get an ESTALE on the file in a directory where some
other process issued 'rm -rf some_dir_containing_the_file' twice.
Before the commit, any attempt at unlinking silly renamed files would
fail inside may_delete() with -EBUSY because of the
DCACHE_NFSFS_RENAMED flag.  The following testcase demonstrates
the problem:
  tail -f /nfsmnt/dir/file &
  rm -rf /nfsmnt/dir
  rm -rf /nfsmnt/dir
  # second removal does not fail, 'tail' process receives ESTALE

The problem with the above commit is that it unhashes the old and
new dentries from the lookup path, even in the normal case when
a signal is not encountered and it would have been safe to call
d_move.  Unfortunately the old dentry has the special
DCACHE_NFSFS_RENAMED flag set on it.  Unhashing has the
side-effect that future lookups call d_alloc(), allocating a new
dentry without the special flag for any silly-renamed files.  As a
result, subsequent calls to unlink silly renamed files do not fail
but allow the removal to go through.  This will result in ESTALE
errors for any other process doing operations on the file.

To fix this, go back to using d_move on success.
For the signal case, it's unclear what we may safely do beyond d_drop.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org

Currently, nlmclnt_lock will break out of the for(;;) loop when
the reclaimer wakes up the blocking lock thread by setting
nlm_lck_denied_grace_period. This causes the lock request to fail
with an ENOLCK error.
The intention was always to ensure that we resend the lock request
after the grace period has expired.
Reported-by: Wangyuan Zhang <Wangyuan.Zhang@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

now pnfs client uses block layout, maybe we can remove
blocklayoutdriver first. if we umount later,
it can cause oops in unset_pnfs_layoutdriver.
because nfss->pnfs_curr_ld->clear_layoutdriver is invalid.

reproduce it:
 modprobe  blocklayoutdriver
 mount -t nfs4 -o minorversion=1 pnfsip:/ /mnt/
 rmmod blocklayoutdriver
 umount /mnt

then you can see following

CPU 0
Pid: 17023, comm: umount.nfs4 Tainted: GF          O 3.7.0-rc6-pnfs #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[<ffffffffa04cfe6d>]  [<ffffffffa04cfe6d>] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4]
RSP: 0018:ffff8800022d9e48  EFLAGS: 00010286
RAX: ffffffffa04a1b00 RBX: ffff88000b013800 RCX: 0000000000000001
RDX: ffffffff81ae8ee0 RSI: ffff880001ee94b8 RDI: ffff88000b013800
RBP: ffff8800022d9e58 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880001ee9400
R13: ffff8800105978c0 R14: 00007fff25846c08 R15: 0000000001bba550
FS:  00007f45ae7f0700(0000) GS:ffff880012c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffffffa04a1b38 CR3: 0000000002c0c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount.nfs4 (pid: 17023, threadinfo ffff8800022d8000, task ffff880006e48aa0)
Stack:
ffff8800105978c0 ffff88000b013800 ffff8800022d9e78 ffffffffa04cd0ce
ffff8800022d9e78 ffff88000b013800 ffff8800022d9ea8 ffffffffa04755a7
ffff8800022d9ea8 ffff880002f96400 ffff88000b013800 ffff880002f96400
Call Trace:
[<ffffffffa04cd0ce>] nfs4_destroy_server+0x1e/0x30 [nfsv4]
[<ffffffffa04755a7>] nfs_free_server+0xb7/0x150 [nfs]
[<ffffffffa047d4d5>] nfs_kill_super+0x35/0x40 [nfs]
[<ffffffff81178d35>] deactivate_locked_super+0x45/0x70
[<ffffffff8117986a>] deactivate_super+0x4a/0x70
[<ffffffff81193ee2>] mntput_no_expire+0xd2/0x130
[<ffffffff81194d62>] sys_umount+0x72/0xe0
[<ffffffff8154af59>] system_call_fastpath+0x16/0x1b
Code: 06 e1 b8 ea ff ff ff eb 9e 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 80 03 00 00 48 89 fb 48 85 c0 74 29 <48> 8b 40 38 48 85 c0 74 02 ff d0 48 8b 03 3e ff 48 04 0f 94 c2
RIP  [<ffffffffa04cfe6d>] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4]
RSP <ffff8800022d9e48>
CR2: ffffffffa04a1b38
---[ end trace 29f75aaedda058bf ]---

Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Since commit 620038f6, gcc is throwing the following warning:

  CC [M]  net/sunrpc/auth_gss/auth_gss.o
In file included from include/linux/sunrpc/types.h:14:0,
                 from include/linux/sunrpc/sched.h:14,
                 from include/linux/sunrpc/clnt.h:18,
                 from net/sunrpc/auth_gss/auth_gss.c:45:
net/sunrpc/auth_gss/auth_gss.c: In function ‘gss_pipe_downcall’:
include/linux/sunrpc/debug.h:45:10: warning: ‘timeout’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
    printk(KERN_DEFAULT args); \
          ^
net/sunrpc/auth_gss/auth_gss.c:194:15: note: ‘timeout’ was declared here
  unsigned int timeout;
               ^
If simple_get_bytes returns an error, then we'll end up calling printk
with an uninitialized timeout value. Reasonably harmless, but fairly
simple to fix by removing the printout of the uninitialised parameters.

Cc: Andy Adamson <andros@netapp.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
[Trond: just remove the parameters rather than initialising timeout]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

smatch analysis:

fs/nfs/getroot.c:130 nfs_get_root() info: redundant null
 check on name calling kfree()

fs/nfs/unlink.c:272 nfs_async_unlink() info: redundant null
 check on devname_garbage calling kfree()

Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

layoutget's prepare hook can call rpc_exit with status = NFS4_OK (0).
Because of this, nfs4_proc_layoutget can't depend on a 0 status to mean
that the RPC was successfully sent, received and parsed.

To fix this, use the result's len member to see if parsing took place.

This fixes the following OOPS -- calling xdr_init_decode() with a buffer length
0 doesn't set the stream's 'p' member and ends up using uninitialized memory
in filelayout_decode_layout.

BUG: unable to handle kernel paging request at 0000000000008050
IP: [<ffffffff81282e78>] memcpy+0x18/0x120
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:01.0/irq
CPU 1
Modules linked in: nfs_layout_nfsv41_files nfs lockd fscache auth_rpcgss nfs_acl autofs4 sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log dm_mod ppdev parport_pc parport snd_ens1371 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc e1000 microcode vmware_balloon i2c_piix4 i2c_core sg shpchp ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix mptspi mptscsih mptbase scsi_transport_spi [last unloaded: speedstep_lib]

Pid: 1665, comm: flush-0:22 Not tainted 2.6.32-356-test-2 #2 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[<ffffffff81282e78>]  [<ffffffff81282e78>] memcpy+0x18/0x120
RSP: 0018:ffff88003dfab588  EFLAGS: 00010206
RAX: ffff88003dc42000 RBX: ffff88003dfab610 RCX: 0000000000000009
RDX: 000000003f807ff0 RSI: 0000000000008050 RDI: ffff88003dc42000
RBP: ffff88003dfab5b0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000080 R12: 0000000000000024
R13: ffff88003dc42000 R14: ffff88003f808030 R15: ffff88003dfab6a0
FS:  0000000000000000(0000) GS:ffff880003420000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000008050 CR3: 000000003bc92000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process flush-0:22 (pid: 1665, threadinfo ffff88003dfaa000, task ffff880037f77540)
Stack:
ffffffffa0398ac1 ffff8800397c5940 ffff88003dfab610 ffff88003dfab6a0
<d> ffff88003dfab5d0 ffff88003dfab680 ffffffffa01c150b ffffea0000d82e70
<d> 000000508116713b 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffffa0398ac1>] ? xdr_inline_decode+0xb1/0x120 [sunrpc]
[<ffffffffa01c150b>] filelayout_decode_layout+0xeb/0x350 [nfs_layout_nfsv41_files]
[<ffffffffa01c17fc>] filelayout_alloc_lseg+0x8c/0x3c0 [nfs_layout_nfsv41_files]
[<ffffffff8150e6ce>] ? __wait_on_bit+0x7e/0x90
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

The current code in pnfs_destroy_all_layouts() assumes that removing
the layout from the server->layouts list is sufficient to make it
invisible to other processes. This ignores the fact that most
users access the layout through the nfs_inode->layout...
There is further breakage due to lack of reference counting of the
layouts, meaning that the whole thing Oopses at the drop of a hat.

The code in initiate_bulk_draining() is almost correct, and can be
used as a model for pnfs_destroy_all_layouts(), so move that
code to pnfs.c, and refactor the code to allow us to choose between
a single filesystem bulk recall, and a recall of all layouts.
Also note that initiate_bulk_draining() currently calls iput() while
holding locks. Fix that too.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Ensure that if nfs_wait_on_sequence() causes our rpc task to wait for
an NFSv4 state serialisation lock, then we also drop the session slot.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

If the server reboots after it has replied to our OPEN, but before we
call nfs4_opendata_to_nfs4_state(), then the reboot recovery thread
will not see a stateid for this open, and so will fail to recover it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Add a mutex to the struct nfs4_state_owner to ensure that delegation
recall doesn't conflict with byte range lock removal.

Note that we nest the new mutex _outside_ the state manager reclaim
protection (nfsi->rwsem) in order to avoid deadlocks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Adjust the return values so that they return EAGAIN to the caller in
cases where we might want to retry the delegation recall after
the state recovery has run.
Note that we can't wait and retry in this routine, because the caller
may be the state manager thread.

If delegation recall fails due to a session or reboot related issue,
also ensure that we mark the stateid as delegated so that
nfs_delegation_claim_opens can find it again later.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

If the server reboots while we are converting a delegation into
OPEN/LOCK stateids as part of a delegation return, the current code
will simply exit with an error. This causes us to lose both
delegation state and locking state (i.e. locking atomicity).

Deal with this by exposing the delegation stateid during delegation
return, so that we can recover the delegation, and then resume
open/lock recovery.

Note that not having to hold the nfs_inode->rwsem across the
calls to nfs_delegation_claim_opens() also fixes a deadlock against
the NFSv4.1 reboot recovery code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We currently have a deadlock in which the state recovery thread
ends up blocking due to one of the locks which it is trying to
recover holding the nfs_inode->rwsem.
The situation is as follows: the state recovery thread is
scheduled in order to recover from a reboot. It immediately
drains the session, forcing all ordinary NFSv4.1 calls to
nfs41_setup_sequence() to be put to sleep.  This includes the
file locking process that holds the nfs_inode->rwsem.
When the thread gets to nfs4_reclaim_locks(), it tries to
grab a write lock on nfs_inode->rwsem, and boom...

Fix is to have the lock drop the nfs_inode->rwsem while it is
doing RPC calls. We use a sequence lock in order to signal to
the locking process whether or not a state recovery thread has
run on that inode, in which case it should retry the lock.
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This patch adds a seqcount_t lock for use by the state manager to
signal that an open owner has been recovered. This mechanism will be
used by the delegation, open and byte range lock code in order to
figure out if they need to replay requests due to collisions with
lock recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Ditto for _gss_mech_get_by_pseudoflavor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This reverts commit 324d003b.

The deadlock turned out to be caused by a workqueue limitation that has
now been worked around in the RPC code (see comment in rpc_free_task).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

It is no longer in use
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Avoid an RCU dereference by removing task->tk_xprt
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Avoid access to task->tk_xprt
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Avoid another RCU dereference by passing the pointer to struct rpc_xprt
from the caller.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

tk_xprt is just a shortcut for tk_client->cl_xprt, however cl_xprt is
defined as an __rcu variable. Replace dereferences of tk_xprt with
non-rcu dereferences where it is safe to do so.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Pull more device-mapper fixes from Alasdair G Kergon:
 "A fix for stacked dm thin devices and a fix for the new dm WRITE SAME
  support."

* tag 'dm-3.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: fix write same requests counting
  dm thin: fix queue limits stacking

PullHID fixes from Jiri Kosina:

 - fix i2c-hid and hidraw interaction, by Benjamin Tissoires

 - a quirk to make a particular device (Formosa IR receiver) work
   properly, by Nicholas Santos

* 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: fix i2c_hid_output_raw_report
  HID: usbhid: quirk for Formosa IR receiver
  HID: remove x bit from sensor doc

Pull NFS client bugfixes from Trond Myklebust:

 - Error reporting in nfs_xdev_mount incorrectly maps all errors to
   ENOMEM

 - Fix an NFSv4 refcounting issue

 - Fix a mount failure when the server reboots during NFSv4 trunking
   discovery

 - NFSv4.1 mounts may need to run the lease recovery thread.

 - Don't silently fail setattr() requests on mountpoints

 - Fix a SUNRPC socket/transport livelock and priority queue issue

 - We must handle NFS4ERR_DELAY when resetting the NFSv4.1 session.

* tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session
  SUNRPC: When changing the queue priority, ensure that we change the owner
  NFS: Don't silently fail setattr() requests on mountpoints
  NFSv4.1: Ensure that nfs41_walk_client_list() does start lease recovery
  NFSv4: Fix NFSv4 trunking discovery
  NFSv4: Fix NFSv4 reference counting for trunked sessions
  NFS: Fix error reporting in nfs_xdev_mount

Pull MIPS updates from Ralf Baechle:
 "A number of fixes all across the MIPS tree.  No area is particularly
  standing out and things have cooled down quite nicely for a release."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Function tracer: Fix broken function tracing
  mips: Move __virt_addr_valid() to a place for MIPS 64
  MIPS: Netlogic: Fix UP compilation on XLR
  MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE
  MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE
  MIPS: Lantiq: Fix cp0_perfcount_irq mapping
  MIPS: DSP: Fix DSP mask for registers.
  MIPS: Fix build failure by adding definition of pfn_pmd().
  MIPS: Octeon: Fix warning.
  MIPS: delay.c: Check BITS_PER_LONG instead of __SIZEOF_LONG__
  MIPS: PNX833x: Fix comment.
  MIPS: Add struct p_format to union mips_instruction.
  MIPS: Export <asm/break.h>.
  MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE.
  MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platform
  MIPS: vpe.c: Fix null pointer dereference in print arguments.

i2c_hid_output_raw_report is used by hidraw to forward set_report requests.
The current implementation of i2c_hid_set_report needs to take the
report_id as an argument. The report_id is stored in the first byte
of the buffer in argument of i2c_hid_output_raw_report.

Not removing the report_id from the given buffer adds this byte 2 times
in the command, leading to a non working command.
Reported-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Function tracing is currently broken for all 32 bit MIPS platforms.
When tracing is enabled, the kernel immediately hangs on boot.
This is a result of commit b732d439
that changes the kernel/trace/Kconfig file so that is no longer
forces FRAME_POINTER when FUNCTION_TRACING is enabled.

MIPS frame pointers are generally considered to be useless because
they cannot be used to unwind the stack. Unfortunately the MIPS
function tracing code has bugs that are masked by the use of frame
pointers. This commit fixes the bugs so that MIPS frame pointers
don't need to be enabled.

The bugs are a result of the odd calling sequence used to call the trace
routine. This calling sequence is inserted into every traceable function
when the tracing CONFIG option is enabled. This sequence is generated
for 32bit MIPS platforms by the compiler via the "-pg" flag.

Part of the sequence is "addiu sp,sp,-8" in the delay slot after every
call to the trace routine "_mcount" (some legacy thing where 2 arguments
used to be pushed on the stack). The _mcount routine is expected to
adjust the sp by +8 before returning.  So when not disabled, the original
jalr and addiu will be there, so _mcount has to adjust sp.

The problem is that when tracing is disabled for a function, the
"jalr _mcount" instruction is replaced with a nop, but the
"addiu sp,sp,-8" is still executed and the stack pointer is left
trashed. When frame pointers are enabled the problem is masked
because any access to the stack is done through the frame
pointer and the stack pointer is restored from the frame pointer when
the function returns.

This patch writes two nops starting at the address of the "jalr _mcount"
instruction whenever tracing is disabled. This means that the
"addiu sp,sp.-8" will be converted to a nop along with the "jalr".  When
disabled, there will be two nops.

This is SMP safe because the first time this happens is during
ftrace_init() which is before any other processor has been started.
Subsequent calls to enable/disable tracing when other CPUs ARE running
will still be safe because the enable will only change the first nop
to a "jalr" and the disable, while writing 2 nops, will only be changing
the "jalr". This patch also stops using stop_machine() to call the
tracer enable/disable routines and calls them directly because the
routines are SMP safe.

When the kernel first boots we have to be able to handle the gcc
generated jalr, addui sequence until ftrace_init gets a chance to run
and change the sequence. At this point mcount just adjusts the stack
and returns. When ftrace_init runs, we convert the jalr/addui to nops.
Then whenever tracing is enabled we convert the first nop to a "jalr
mcount+8". The mcount+8 entry point skips the stack adjust.

[ralf@linux-mips.org: Folded in  Steven Rostedt's build fix.]
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: rostedt@goodmis.org
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4806/
Patchwork: https://patchwork.linux-mips.org/patch/4841/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When processing write same requests, fix dm to send the configured
number of WRITE SAME requests to the target rather than the number of
discards, which is not always the same.

Device-mapper WRITE SAME support was introduced by commit
23508a96 ("dm: add WRITE SAME support").
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>

Commit d3ce8843 "MIPS: Fix modpost error in modules attepting to use
virt_addr_valid()" moved __virt_addr_valid() from a macro in a header
file to a function in ioremap.c. But ioremap.c is only compiled for MIPS
32, and not for MIPS 64.

When compiling for my yeeloong2, which supposedly supports hibernation,
which compiles kernel/power/snapshot.c which calls virt_addr_valid(), I
got this error:

  LD      init/built-in.o
kernel/built-in.o: In function `memory_bm_free':
snapshot.c:(.text+0x4c9c4): undefined reference to `__virt_addr_valid'
snapshot.c:(.text+0x4ca58): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e44c): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e890): undefined reference to `__virt_addr_valid'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

I suspect that __virt_addr_valid() is fine for mips 64. I moved it to
mmap.c such that it gets compiled for mips 64 and 32.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4842/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>