- 17 Mar, 2018 13 commits
-
-
David S. Miller authored
Jon Maloy says: ==================== tipc: obsolete zone concept Functionality related to the 'zone' concept was never implemented in TIPC. In this series we eliminate the remaining traces of it in the code, and can hence take a first step in reducing the footprint and complexity of the binding table. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We rename some lists and fields in struct publication both to make the naming more consistent and to better reflect their roles. We also update the descriptions of those lists. node_list -> local_publ cluster_list -> all_publ pport_list -> binding_sock ref -> port There are no functional changes in this commit. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Maloy authored
The size of struct publication can be reduced further. Membership in lists 'nodesub_list' and 'local_list' is mutually exlusive, in that remote publications use the former and local publications the latter. We replace the two lists with one single, named 'binding_node' which reflects what it really is. Acked-by:
-
Jon Maloy authored
As a further consequence of the previous commits, we can also remove the member 'zone_list 'in struct name_info and struct publication. Instead, we now let the member cluster_list take over the role a container of all publications of a given <type,lower, upper>. We also remove the counters for the size of those lists, since they don't serve any purpose. Acked-by:
-
Jon Maloy authored
As a consequence of the previous commit we nan now eliminate zone scope related lists in the name table. We start with name_table::publ_list[3], which can now be replaced with two lists, one for node scope publications and one for cluster scope publications. Acked-by:
-
Jon Maloy authored
Publications for TIPC_CLUSTER_SCOPE and TIPC_ZONE_SCOPE are in all aspects handled the same way, both on the publishing node and on the receiving nodes. Despite previous ambitions to the contrary, this is never going to change, so we take the conseqeunce of this and obsolete TIPC_ZONE_SCOPE and related macros/functions. Whenever a user is doing a bind() or a sendmsg() attempt using ZONE_SCOPE we translate this internally to CLUSTER_SCOPE, while we remain compatible with users and remote nodes still using ZONE_SCOPE. Furthermore, the non-formalized scope value 0 has always been permitted for use during lookup, with the same meaning as ZONE_SCOPE/CLUSTER_SCOPE. We now permit it even as binding scope, but for compatibility reasons we choose to not change the value of TIPC_CLUSTER_SCOPE. Acked-by:
-
David S. Miller authored
Kirill Tkhai says: ==================== Converting pernet_operations (part #8) this series continues to review and to convert pernet_operations to make them possible to be executed in parallel for several net namespaces at the same time. There are different operations over the tree, mostly are ipvs. ==================== Signed-off-by: -
Kirill Tkhai authored
These pernet_operations register and unregister ipvs app. register_ip_vs_app(), unregister_ip_vs_app() and register_ip_vs_app_inc() modify per-net structures, and there are no global structures touched. So, this looks safe to be marked as async. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Kirill Tkhai authored
Exit method stops two per-net threads and cancels delayed work. Everything looks nicely per-net divided. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations register and unregister nf hooks, /proc entries, sysctl, percpu statistics. There are several global lists, and the only list modified without exclusive locks is ip_vs_conn_tab in ip_vs_conn_flush(). We iterate the list and force the timers expire at the moment. Since there were possible several timer expirations before this patch, and since they are safe, the patch does not invent new parallelism of their destruction. These pernet_operations look safe to be converted. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations initialize and destroy net_generic() data pointed by ovs_net_id. Exit method destroys vports from alive net to exiting net. Since they are only pernet_operations interested in this data, and exit method is executed under exclusive global lock (ovs_mutex), they are safe to be executed in parallel. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations register and unregister sysctl table. Exit methods frees platform_labels from net::mpls::platform_label. Everything is per-net, and they looks safe to be marked async. Signed-off-by:
-
Kirill Tkhai authored
Init method is rather simple. Exit method queues del_work for every tunnel from per-net list. This seems to be safe to be marked async. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
- 16 Mar, 2018 27 commits
-
-
Yousuk Seung authored
Set tp->snd_ssthresh to BDP upon STARTUP exit. This allows us to check if a BBR flow exited STARTUP and the BDP at the time of STARTUP exit with SCM_TIMESTAMPING_OPT_STATS. Since BBR does not use snd_ssthresh this fix has no impact on BBR's behavior. Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Yousuk Seung authored
This patch adds TCP_NLA_SND_SSTHRESH stat into SCM_TIMESTAMPING_OPT_STATS that reports tcp_sock.snd_ssthresh. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vinicius Costa Gomes authored
Add a way to configure if poll() should wait forever for an event, the number of packets that should be sent for each and if there should be any delay between packets. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Intiyaz Basha authored
1) Moved interrupt enable related code from octeon_process_droq_poll_cmd() to separate function octeon_enable_irq(). 2) Removed wrapper function octeon_process_droq_poll_cmd(), and directlyi using octeon_droq_process_poll_pkts(). 3) Removed unused macros POLL_EVENT_XXX. Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: IPv6 support these smc patches for the net-next tree add IPv6 support. ==================== Signed-off-by: -
Karsten Graul authored
Add ipv6 support to the smc socket layer functions. Make use of the updated clc layer functions to retrieve and match ipv6 information. The indicator for ipv4 or ipv6 is the protocol constant that is provided in the socket() call with address family AF_SMC. Based-on-patch-by:
Takanori Ueda <tkueda@jp.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Karsten Graul authored
The CLC layer is updated to support ipv6 proposal messages from peers and to match incoming proposal messages against the ipv6 addresses of the net device. struct smc_clc_ipv6_prefix is updated to provide the space for an ipv6 address (struct was not used before). SMC_CLC_MAX_LEN is updated to include the size of the proposal prefix. Existing code in net is not affected, the previous SMC_CLC_MAX_LEN value is large enough to hold ipv4 proposal messages. Signed-off-by:
-
Karsten Graul authored
Introduce functions smc_clc_prfx_set to retrieve IP information for the CLC proposal msg and smc_clc_prfx_match to match the contents of a proposal message against the IP addresses of the net device. The new functions replace the functionality provided by smc_clc_netinfo_by_tcpsk, which is removed by this patch. The match functionality is extended to scan all ipv4 addresses of the net device for a match against the ipv4 subnet from the proposal msg. Signed-off-by:
-
Ganesh Goudar authored
notify uld drivers if the adapter encounters fatal error. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Kirill Tkhai says: ==================== Introduce rtnl_lock_killable() rtnl_lock() is widely used mutex in kernel. Some of kernel code does memory allocations under it. In case of memory deficit this may invoke OOM killer, but the problem is a killed task can't exit if it's waiting for the mutex. This may be a reason of deadlock and panic. This patchset adds a new primitive, which responds on SIGKILL, and it allows to use it in the places, where we don't want to sleep forever. Also, the first place is made to use it. ==================== Signed-off-by: -
Kirill Tkhai authored
This patch adds rtnl_lock_killable() to one of hot path using rtnl_lock(). Signed-off-by:
-
Kirill Tkhai authored
rtnl_lock() is widely used mutex in kernel. Some of kernel code does memory allocations under it. In case of memory deficit this may invoke OOM killer, but the problem is a killed task can't exit if it's waiting for the mutex. This may be a reason of deadlock and panic. This patch adds a new primitive, which responds on SIGKILL, and it allows to use it in the places, where we don't want to sleep forever. Signed-off-by:
-
Tonghao Zhang authored
The SK_MEM_QUANTUM was changed from PAGE_SIZE to 4096. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Tonghao Zhang authored
This patch moves the udp_rmem_min, udp_wmem_min to namespace and init the udp_l3mdev_accept explicitly. The udp_rmem_min/udp_wmem_min affect udp rx/tx queue, with this patch namespaces can set them differently. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net/ipv6: Address checks need to consider the L3 domain IPv6 prohibits a local address from being used as a gateway for a route. However, it is ok for the gateway to be a local address in a different L3 domain (e.g., VRF). This allows, for example, veth pairs to connect VRFs. ip6_route_info_create calls ipv6_chk_addr_and_flags for gateway addresses to determine if the address is a local one, but ipv6_chk_addr_and_flags does not currently consider L3 domains. As a result routes can not be added in one VRF with a nexthop that points to a local address in a second VRF. Resolve by comparing the l3mdev for the passed in device and requiring an l3mdev match with the device containing an address. The intent of checking for an address on the specified device versus any device in the domain is mantained by a new argument to skip the check between the passed in device and the device with the address. Patch 1 moves the gateway validation from ip6_route_info_create into a helper; the function is long enough and refactoring drops the indent level. Patch 2 adds a skip_dev_check argument to ipv6_chk_addr_and_flags to allow a device to always be passed yet skip the device check when looking at addresses and fixes up a few ipv6_chk_addr callers that pass a NULL device. Patch 3 adds l3mdev checks to ipv6_chk_addr_and_flags. Patches 4 and 5 do some refactoring to the fib_tests script and then patch 6 adds nexthop validation tests. v4 - separated l3mdev check into a separate patch (patch 3 of this set) as suggested by Kirill - consolidated dev and ipv6_chk_addr_and_flags call into 1 if (Kirill) - added a temp variable for gw type (Kirill) v3 - set skip_dev_check in ipv6_chk_addr based on dev == NULL (per comment from Ido) v2 - handle 2 variations of route spec with sane error path - add test cases ==================== Signed-off-by: -
David Ahern authored
Add series of tests for valid and invalid nexthop specs for IPv6. $ TEST=fib_nexthop_test ./fib_tests.sh ... IPv6 nexthop tests TEST: Directly connected nexthop, unicast address [ OK ] TEST: Directly connected nexthop, unicast address with device [ OK ] TEST: Gateway is linklocal address [ OK ] TEST: Gateway is linklocal address, no device [ OK ] TEST: Gateway can not be local unicast address [ OK ] TEST: Gateway can not be local unicast address, with device [ OK ] TEST: Gateway can not be a local linklocal address [ OK ] TEST: Gateway can be local address in a VRF [ OK ] TEST: Gateway can be local address in a VRF, with device [ OK ] TEST: Gateway can be local linklocal address in a VRF [ OK ] TEST: Redirect to VRF lookup [ OK ] TEST: VRF route, gateway can be local address in default VRF [ OK ] TEST: VRF route, gateway can not be a local address [ OK ] TEST: VRF route, gateway can not be a local addr with device [ OK ] Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Allow a user to run just a specific fib test by setting the TEST environment variable. Signed-off-by:
-
David Ahern authored
Replace 'ip -netns testns' with the alias IP. Shortens the line lengths and makes running the commands manually a bit easier. Signed-off-by:
-
David Ahern authored
Lookup the L3 master device for the passed in device. Only consider addresses on netdev's with the same master device. If the device is not enslaved or is NULL, then the l3mdev is NULL which means only devices not enslaved (ie, in the default domain) are considered. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David Ahern authored
ipv6_chk_addr_and_flags determines if an address is a local address and optionally if it is an address on a specific device. For example, it is called by ip6_route_info_create to determine if a given gateway address is a local address. The address check currently does not consider L3 domains and as a result does not allow a route to be added in one VRF if the nexthop points to an address in a second VRF. e.g., $ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23 Error: Invalid gateway address. where 2001:db8:102::23 is an address on an interface in vrf r1. ipv6_chk_addr_and_flags needs to allow callers to always pass in a device with a separate argument to not limit the address to the specific device. The device is used used to determine the L3 domain of interest. To that end add an argument to skip the device check and update callers to always pass a device where possible and use the new argument to mean any address in the domain. Update a handful of users of ipv6_chk_addr with a NULL dev argument. This patch handles the change to these callers without adding the domain check. ip6_validate_gw needs to handle 2 cases - one where the device is given as part of the nexthop spec and the other where the device is resolved. There is at least 1 VRF case where deferring the check to only after the route lookup has resolved the device fails with an unintuitive error "RTNETLINK answers: No route to host" as opposed to the preferred "Error: Gateway can not be a local address." The 'no route to host' error is because of the fallback to a full lookup. The check is done twice to avoid this error. Signed-off-by: -
David Ahern authored
Move gateway validation code from ip6_route_info_create into ip6_validate_gw. Code move plus adjustments to handle the potential reset of dev and idev and to make checkpatch happy. Signed-off-by:
-
David S. Miller authored
Brad Mouring says: ==================== net: macb: Introduce phy-handle DT functionality Consider the situation where a macb netdev is connected through a phydev that sits on a mii bus other than the one provided to this particular netdev. This situation is what this patchset aims to accomplish through the existing phy-handle optional binding. This optional binding (as described in the ethernet DT bindings doc) directs the netdev to the phydev to use. This is precisely the situation this patchset aims to solve, so it makes sense to introduce the functionality to this driver (where the physical layout discussed was encountered). The devicetree snippet would look something like this: ... ethernet@feedf00d { ... phy-handle = <&phy0> // the first netdev is physically wired to phy0 ... phy0: phy@0 { ... reg = <0x0> // MDIO address 0 ... } phy1: phy@1 { ... reg = <0x1> // MDIO address 1 ... } ... } ethernet@deadbeef { ... phy-handle = <&phy1> // tells the driver to use phy1 on the // first mac's mdio bus (it's wired thusly) ... } ... The work done to add the phy_node in the first place (dacdbb4d: "net: macb: add fixed-link node support") will consume the device_node (if found). v2: Reorganization of mii probe/init functions, suggested by Andrew Lunn v3: Moved some of the bus init code back into init (erroneously moved to probe) some style issues, and an unintialized variable warning addressed. v4: Add Reviewed-by: tags Skip fallback code if phy-handle phandle is found v5: Cleanup formatting issues Fix compile failure introduced in 1/4 "net: macb: Reorganize macb_mii bringup" Fix typo in "Documentation: macb: Document phy-handle binding" ==================== Signed-off-by: -
Brad Mouring authored
Document the existence of the optional binding, directing to the general ethernet document that describes this binding. Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Brad Mouring authored
This optional binding (as described in the ethernet DT bindings doc) directs the netdev to the phydev to use. This is useful for a phy chip that has >1 phy in it, and two netdevs are using the same phy chip (i.e. the second mac's phy lives on the first mac's MDIO bus) The devicetree snippet would look something like this: ethernet@feedf00d { ... phy-handle = <&phy0> // the first netdev is physically wired to phy0 ... phy0: phy@0 { ... reg = <0x0> // MDIO address 0 ... } phy1: phy@1 { ... reg = <0x1> // MDIO address 1 ... } ... } ethernet@deadbeef { ... phy-handle = <&phy1> // tells the driver to use phy1 on the // first mac's mdio bus (it's wired thusly) ... } The work done to add the phy_node in the first place (dacdbb4d: "net: macb: add fixed-link node support") will consume the device_node (if found). Signed-off-by: -
Brad Mouring authored
In phy_device's general probe, this device will already be set for phy register polling, rendering this code redundant. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Brad Mouring authored
The macb mii setup (mii_probe() and mii_init()) previously was somewhat interspersed, likely a result of organic growth and hacking. This change moves mii bus registration into mii_init and probing the bus for devices into mii_probe. Signed-off-by:
-
Stephen Hemminger authored
The packet_mmap documentation had links to no longer existing web sites; replace with other site which has similar example. Support for packet mmap has been in mainline versions of libpcap for several years. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
