- 21 Dec, 2018 40 commits
-
-
Wen Yang authored
[ Upstream commit 098336de ] The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yangtao Li authored
[ Upstream commit a51921c0 ] use of_node_put() to release the refcount. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit dac097c4 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 6bd520ab ] use of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 87d81a23 ] use of_node_put() to release the refcount. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 0a9a4304 ] If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress. Fixes: 0b9e7943 ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Dave Kleikamp authored
[ Upstream commit ad3cba22 ] When we use direct_IO with an NFS backing store, we can trigger a WARNING in __set_page_dirty(), as below, since we're dirtying the page unnecessarily in nfs_direct_read_completion(). To fix, replicate the logic in commit 53cbf3b1 ("fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read"). Other filesystems that implement direct_IO handle this; most use blockdev_direct_IO(). ceph and cifs have similar logic. mount 127.0.0.1:/export /nfs dd if=/dev/zero of=/nfs/image bs=1M count=200 losetup --direct-io=on -f /nfs/image mkfs.btrfs /dev/loop0 mount -t btrfs /dev/loop0 /mnt/ kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0 kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_ kernel: snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G E 4.20.0-rc1.master.20181111.ol7.x86_64 #1 kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 kernel: Workqueue: nfsiod rpc_async_release [sunrpc] kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0 kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8 kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046 kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0 kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080 kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0 kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001 kernel: FS: 0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: __set_page_dirty_buffers+0xb6/0x110 kernel: set_page_dirty+0x52/0xb0 kernel: nfs_direct_read_completion+0xc4/0x120 [nfs] kernel: nfs_pgio_release+0x10/0x20 [nfs] kernel: rpc_free_task+0x30/0x70 [sunrpc] kernel: rpc_async_release+0x12/0x20 [sunrpc] kernel: process_one_work+0x174/0x390 kernel: worker_thread+0x4f/0x3e0 kernel: kthread+0x102/0x140 kernel: ? drain_workqueue+0x130/0x130 kernel: ? kthread_stop+0x110/0x110 kernel: ret_from_fork+0x35/0x40 kernel: ---[ end trace 01341980905412c9 ]--- Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> [forward-ported to v4.20] Signed-off-by:
Calum Mackay <calum.mackay@oracle.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
David Miller authored
[ Upstream commit c01ac66b ] The message got changed a lot time ago. This was responsible for 36 test case failures on sparc64. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Toni Peltonen authored
[ Upstream commit 3b5b3a33 ] Previously when unbinding a slave the 802.3ad implementation only told partner that the port is not suitable for aggregation by setting the port aggregation state from aggregatable to individual. This is not enough. If the physical layer still stays up and we only unbinded this port from the bond there is nothing in the aggregation status alone to prevent the partner from sending traffic towards us. To ensure that the partner doesn't consider this port at all anymore we should also disable collecting and distributing to signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to ensure partner exits collecting + distributing state. I have tested this behaviour againts Arista EOS switches with mlx5 cards (physical link stays up even when interface is down) and simulated the same situation virtually Linux <-> Linux with two network namespaces running two veth device pairs. In both cases setting aggregation to individual doesn't alone prevent traffic from being to sent towards this port given that the link stays up in partners end. Partner still keeps it's end in collecting + distributing state and continues until timeout is reached. In most cases this means we are losing the traffic partner sends towards our port while we wait for timeout. This is most visible with slow periodic time (LACP rate slow). Other open source implementations like Open VSwitch and libreswitch, and vendor implementations like Arista EOS, seem to disable collecting + distributing to when doing similar port disabling/detaching/removing change. With this patch kernel implementation would behave the same way and ensure partner doesn't consider our actor viable anymore. Signed-off-by:
Toni Peltonen <peltzi@peltzi.fi> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 10d44343 ] Some ARC CPU's do not support unaligned loads/stores. Currently, generic implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC. This can lead to misfunction of some drivers as generic functions do a plain dereference of a pointer that can be unaligned. Let's use {get/put}_unaligned() helpers instead of plain dereference of pointer in order to fix. The helpers allow to get and store data from an unaligned address whilst preserving the CPU internal alignment. According to [1], the use of these helpers are costly in terms of performance so we added an initial check for a buffer already aligned so that the usage of the helpers can be avoided, when possible. [1] Documentation/unaligned-memory-access.txt Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David Laight <David.Laight@ACULAB.COM> Tested-by:
Vitor Soares <soares@synopsys.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sean Paul authored
[ Upstream commit 3b712e43 ] Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
YiFei Zhu authored
[ Upstream commit 79c2206d ] An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full. This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold. Signed-off-by:
YiFei Zhu <zhuyifei1999@gmail.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Cathy Avery authored
[ Upstream commit 02f425f8 ] Currently pvscsi_remove calls free_irq more than once as pvscsi_release_resources and __pvscsi_shutdown both call pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ' warning and stack trace. To solve the problem pvscsi_shutdown_intr has been moved out of pvscsi_release_resources. Signed-off-by:
Cathy Avery <cavery@redhat.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Fred Herard authored
[ Upstream commit 5db6dd14 ] This commit addresses NULL pointer dereference in iscsi_eh_session_reset. Reference should not be made to session->leadconn when session->state is set to ISCSI_STATE_TERMINATE. Signed-off-by:
Fred Herard <fred.herard@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 10f91c73 ] It makes little sense but still possible to put Hyper-V guests into suspend-to-idle state. To wake them up two wakeup sources were registered in the past: hyperv-keyboard and hid-hyperv. However, since commit eed4d47e ("ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch to pm_wakeup_hard_event() API as these devices are actually the only possible way to wakeup Hyper-V guests. Fixes: eed4d47e (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 05cc09de ] There is no unregister netlink notifier and family on error paths in init_mac80211_hwsim(). Also there is an error path where hwsim_class is not destroyed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 62759361 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit 6cc65be4 ] One of my tests compiles the kernel with gcc 4.5.3, and I hit the following build error: include/linux/semaphore.h: In function 'sema_init': include/linux/semaphore.h:35:17: error: unknown field 'val' specified in initializer include/linux/semaphore.h:35:17: warning: missing braces around initializer include/linux/semaphore.h:35:17: warning: (near initialization for '(anonymous).raw_lock.<anonymous>.val') I bisected it down to: 625e88be ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") ... which makes qspinlock have an anonymous union, which makes initializing it special for older compilers. By adding strategic brackets, it makes the build happy again. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Waiman Long <longman@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 625e88be ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") Link: http://lkml.kernel.org/r/20180621203526.172ab5c4@vmware.local.homeSigned-off-by:
-
Michael J. Ruhl authored
commit 28a9a9e8 upstream Packet queue state is over used to determine SDMA descriptor availablitity and packet queue request state. cpu 0 ret = user_sdma_send_pkts(req, pcount); cpu 0 if (atomic_read(&pq->n_reqs)) cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE) cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE); At this point pq->n_reqs == 0 and pq->state is incorrectly SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state to return to _INACTIVE. This can also change the state from _DEFERRED to _ACTIVE. However, this is a mostly benign race. Remove the racy code path. Use n_reqs to determine if a packet queue is active or not. Cc: <stable@vger.kernel.org> # 4.14.0> Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 911a2648 ] Commit c470bdc1 ("mac80211: don't WARN on bad WMM parameters from buggy APs") handled cases where an AP reports a zeroed WMM IE. However, the condition that checks the validity accessed the wrong index in the ieee80211_tx_queue_params array, thus wrongly deducing that the parameters are invalid. Fix it. Fixes: c470bdc1 ("mac80211: don't WARN on bad WMM parameters from buggy APs") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit c470bdc1 ] Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079b ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Jozsef Kadlecsik authored
[ Upstream commit 0b8d9073 ] Fix wraparound bug which could lead to memory exhaustion when adding an x.x.x.x-255.255.255.255 range to any hash:*net* types. Fixes Netfilter's bugzilla id #1212, reported by Thomas Schwark. Fixes: 48596a8d ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses") Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jens Axboe authored
[ Upstream commit 2527d997 ] If an IO scheduler is selected via elevator= and it doesn't match the driver in question wrt blk-mq support, then we fail to boot. The elevator= parameter is deprecated and only supported for non-mq devices. Augment the elevator lookup API so that we pass in if we're looking for an mq capable scheduler or not, so that we only ever return a valid type for the queue in question. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196695Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Peter Zijlstra authored
commit 7aa54be2 upstream. On x86 we cannot do fetch_or() with a single instruction and thus end up using a cmpxchg loop, this reduces determinism. Replace the fetch_or() with a composite operation: tas-pending + load. Using two instructions of course opens a window we previously did not have. Consider the scenario: CPU0 CPU1 CPU2 1) lock trylock -> (0,0,1) 2) lock trylock /* fail */ 3) unlock -> (0,0,0) 4) lock trylock -> (0,0,1) 5) tas-pending -> (0,1,1) load-val <- (0,1,0) from 3 6) clear-pending-set-locked -> (0,0,1) FAIL: _2_ owners where 5) is our new composite operation. When we consider each part of the qspinlock state as a separate variable (as we can when _Q_PENDING_BITS == 8) then the above is entirely possible, because tas-pending will only RmW the pending byte, so the later load is able to observe prior tail and lock state (but not earlier than its own trylock, which operates on the whole word, due to coherence). To avoid this we need 2 things: - the load must come after the tas-pending (obviously, otherwise it can trivially observe prior state). - the tas-pending must be a full word RmW instruction, it cannot be an XCHGB for example, such that we cannot observe other state prior to setting pending. On x86 we can realize this by using "LOCK BTS m32, r32" for tas-pending followed by a regular load. Note that observing later state is not a problem: - if we fail to observe a later unlock, we'll simply spin-wait for that store to become visible. - if we observe a later xchg_tail(), there is no difference from that xchg_tail() having taken place before the tas-pending. Suggested-by:
Will Deacon <will.deacon@arm.com> Reported-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Will Deacon authored
commit b247be3f upstream. On x86, atomic_cond_read_relaxed will busy-wait with a cpu_relax() loop, so it is desirable to increase the number of times we spin on the qspinlock lockword when it is found to be transitioning from pending to locked. According to Waiman Long: | Ideally, the spinning times should be at least a few times the typical | cacheline load time from memory which I think can be down to 100ns or | so for each cacheline load with the newest systems or up to several | hundreds ns for older systems. which in his benchmarking corresponded to 512 iterations. Suggested-by:
-
Peter Zijlstra authored
commit 53bf57fa upstream. Flip the branch condition after atomic_fetch_or_acquire(_Q_PENDING_VAL) such that we loose the indent. This also result in a more natural code flow IMO. Signed-off-by:
-
Will Deacon authored
commit c61da58d upstream. When a queued locker reaches the head of the queue, it claims the lock by setting _Q_LOCKED_VAL in the lockword. If there isn't contention, it must also clear the tail as part of this operation so that subsequent lockers can avoid taking the slowpath altogether. Currently this is expressed as a cmpxchg() loop that practically only runs up to two iterations. This is confusing to the reader and unhelpful to the compiler. Rewrite the cmpxchg() loop without the loop, so that a failed cmpxchg() implies that there is contention and we just need to write to _Q_LOCKED_VAL without considering the rest of the lockword. Signed-off-by:
-
Will Deacon authored
commit 3bea9adc upstream. The native clear_pending() function is identical to the PV version, so the latter can simply be removed. This fixes the build for systems with >= 16K CPUs using the PV lock implementation. Reported-by:
-
Will Deacon authored
commit 59fb586b upstream. The qspinlock locking slowpath utilises a "pending" bit as a simple form of an embedded test-and-set lock that can avoid the overhead of explicit queuing in cases where the lock is held but uncontended. This bit is managed using a cmpxchg() loop which tries to transition the uncontended lock word from (0,0,0) -> (0,0,1) or (0,0,1) -> (0,1,1). Unfortunately, the cmpxchg() loop is unbounded and lockers can be starved indefinitely if the lock word is seen to oscillate between unlocked (0,0,0) and locked (0,0,1). This could happen if concurrent lockers are able to take the lock in the cmpxchg() loop without queuing and pass it around amongst themselves. This patch fixes the problem by unconditionally setting _Q_PENDING_VAL using atomic_fetch_or, and then inspecting the old value to see whether we need to spin on the current lock owner, or whether we now effectively hold the lock. The tricky scenario is when concurrent lockers end up queuing on the lock and the lock becomes available, causing us to see a lockword of (n,0,0). With pending now set, simply queuing could lead to deadlock as the head of the queue may not have observed the pending flag being cleared. Conversely, if the head of the queue did observe pending being cleared, then it could transition the lock from (n,0,0) -> (0,0,1) meaning that any attempt to "undo" our setting of the pending bit could race with a concurrent locker trying to set it. We handle this race by preserving the pending bit when taking the lock after reaching the head of the queue and leaving the tail entry intact if we saw pending set, because we know that the tail is going to be updated shortly. Signed-off-by:
-
Will Deacon authored
commit 625e88be upstream. 'struct __qspinlock' provides a handy union of fields so that subcomponents of the lockword can be accessed by name, without having to manage shifts and masks explicitly and take endianness into account. This is useful in qspinlock.h and also potentially in arch headers, so move the 'struct __qspinlock' into 'struct qspinlock' and kill the extra definition. Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-3-git-send-email-will.deacon@arm.comSigned-off-by:
-
Will Deacon authored
commit 6512276d upstream. If a locker taking the qspinlock slowpath reads a lock value indicating that only the pending bit is set, then it will spin whilst the concurrent pending->locked transition takes effect. Unfortunately, there is no guarantee that such a transition will ever be observed since concurrent lockers could continuously set pending and hand over the lock amongst themselves, leading to starvation. Whilst this would probably resolve in practice, it means that it is not possible to prove liveness properties about the lock and means that lock acquisition time is unbounded. Rather than removing the pending->locked spinning from the slowpath altogether (which has been shown to heavily penalise a 2-threaded locking stress test on x86), this patch replaces the explicit spinning with a call to atomic_cond_read_relaxed and allows the architecture to provide a bound on the number of spins. For architectures that can respond to changes in cacheline state in their smp_cond_load implementation, it should be sufficient to use the default bound of 1. Suggested-by:
-
Will Deacon authored
commit 95bcade3 upstream. When a locker ends up queuing on the qspinlock locking slowpath, we initialise the relevant mcs node and publish it indirectly by updating the tail portion of the lock word using xchg_tail. If we find that there was a pre-existing locker in the queue, we subsequently update their ->next field to point at our node so that we are notified when it's our turn to take the lock. This can be roughly illustrated as follows: /* Initialise the fields in node and encode a pointer to node in tail */ tail = initialise_node(node); /* * Exchange tail into the lockword using an atomic read-modify-write * operation with release semantics */ old = xchg_tail(lock, tail); /* If there was a pre-existing waiter ... */ if (old & _Q_TAIL_MASK) { prev = decode_tail(old); smp_read_barrier_depends(); /* ... then update their ->next field to point to node. WRITE_ONCE(prev->next, node); } The conditional update of prev->next therefore relies on the address dependency from the result of xchg_tail ensuring order against the prior initialisation of node. However, since the release semantics of the xchg_tail operation apply only to the write portion of the RmW, then this ordering is not guaranteed and it is possible for the CPU to return old before the writes to node have been published, consequently allowing us to point prev->next to an uninitialised node. This patch fixes the problem by making the update of prev->next a RELEASE operation, which also removes the reliance on dependency ordering. Signed-off-by:
-
Paul E. McKenney authored
commit 548095de upstream. Queued spinlocks are not used by DEC Alpha, and furthermore operations such as READ_ONCE() and release/relaxed RMW atomics are being changed to imply smp_read_barrier_depends(). This commit therefore removes the now-redundant smp_read_barrier_depends() from queued_spin_lock_slowpath(), and adjusts the comments accordingly. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
commit 25896d07 upstream. It is troublesome to add a diagnostic like this to the Makefile parse stage because the top-level Makefile could be parsed with a stale include/config/auto.conf. Once you are hit by the error about non-retpoline compiler, the compilation still breaks even after disabling CONFIG_RETPOLINE. The easiest fix is to move this check to the "archprepare" like this commit did: 829fe4aa ("x86: Allow generating user-space headers without a compiler") Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Fixes: 4cd24de3 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Link: http://lkml.kernel.org/r/1543991239-18476-1-git-send-email-yamada.masahiro@socionext.com Link: https://lkml.org/lkml/2018/12/4/206Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Junwei Zhang authored
commit d55d8be0 upstream. Some new variants require different firmwares. Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Wilson authored
commit cf66b8a0 upstream. Braswell is really picky about having our writes posted to memory before we execute or else the GPU may see stale values. A wmb() is insufficient as it only ensures the writes are visible to other cores, we need a full mb() to ensure the writes are in memory and visible to the GPU. The most frequent failure in flushing before execution is that we see stale PTE values and execute the wrong pages. References: 987abd5c ("drm/i915/execlists: Force write serialisation into context image vs execution") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk (cherry picked from commit 490b8c65) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Brian Norris authored
commit 63238173 upstream. This reverts commit 7f3ef5de. It causes new warnings [1] on shutdown when running the Google Kevin or Scarlet (RK3399) boards under Chrome OS. Presumably our usage of DRM is different than what Marc and Heiko test. We're looking at a different approach (e.g., [2]) to replace this, but IMO the revert should be taken first, as it already propagated to -stable. [1] Report here: http://lkml.kernel.org/lkml/20181205030127.GA200921@google.com WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x1c4/0x294 ... Call trace: drm_mode_config_cleanup+0x1c4/0x294 rockchip_drm_unbind+0x4c/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... Memory manager not clean during takedown. WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mm.c:950 drm_mm_takedown+0x34/0x44 ... drm_mm_takedown+0x34/0x44 rockchip_drm_unbind+0x64/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... [2] https://patchwork.kernel.org/patch/10556151/ https://www.spinics.net/lists/linux-rockchip/msg21342.html [PATCH] drm/rockchip: shutdown drm subsystem on shutdown Fixes: 7f3ef5de ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Vicente Bergas <vicencb@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: stable@vger.kernel.org Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181205181657.177703-1-briannorris@chromium.orgSigned-off-by:
-
Lyude Paul authored
commit 24199c54 upstream. Noticed this while working on redoing the reference counting scheme in the DP MST helpers. Nouveau doesn't attempt to call drm_dp_mst_topology_mgr_destroy() at all, which leaves it leaking all of the resources for drm_dp_mst_topology_mgr and it's children mstbs+ports. Fixes: f479c0ba ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream") Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Radu Rendec authored
commit 78e7b15e upstream. The arch_teardown_msi_irqs() function assumes that controller ops pointers were already checked in arch_setup_msi_irqs(), but this assumption is wrong: arch_teardown_msi_irqs() can be called even when arch_setup_msi_irqs() returns an error (-ENOSYS). This can happen in the following scenario: - msi_capability_init() calls pci_msi_setup_msi_irqs() - pci_msi_setup_msi_irqs() returns -ENOSYS - msi_capability_init() notices the error and calls free_msi_irqs() - free_msi_irqs() calls pci_msi_teardown_msi_irqs() This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs(). The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure seems legit, as it does additional cleanup; e.g. list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs() is called and need to be cleaned up if that fails). Fixes: 6b2fd7ef ("PCI/MSI/PPC: Remove arch_msi_check_device()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Radu Rendec <radu.rendec@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 2840f84f upstream. The following commands will cause a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo schedule > instance/foo/set_ftrace_filter # rmdir instances/foo The reason is that the hashes that hold the filters to set_ftrace_filter and set_ftrace_notrace are not freed if they contain any data on the instance and the instance is removed. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: 591dffda ("ftrace: Allow for function tracing instance to filter functions") Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 3cec638b upstream. When create_event_filter() fails in set_trigger_filter(), the filter may still be allocated and needs to be freed. The caller expects the data->filter to be updated with the new filter, even if the new filter failed (we could add an error message by setting set_str parameter of create_event_filter(), but that's another update). But because the error would just exit, filter was left hanging and nothing could free it. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: bac5fb97 ("tracing: Add and use generic set_trigger_filter() implementation") Reviewed-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
-
