SDMA v4.4.2 doesn't need explicit power gating control through PMFW
Signed-off-by: Asad kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn/jpeg on vcn_v4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable indirect_sram mode on vcn_v4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add unified queue support on vcn_v4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add fwlog support on vcn_v4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

vcn_v4_0_3 increased jpeg instances,
need increasing MAX resources setting accordlingly.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Get information about active XCC and SDMAs from discovery table.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When overridden with module param, directly read discovery info
from discovery binary instead of reading from VRAM.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some AMD APUs may not have a dedicated VRAM. On such platforms the GART
table should be allocated on the system memory. When real vram size is
zero, place the GART table in system memory and create an SG BO to make
it GPU accessible.

v2: fix includes
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
(rajneesh: removed set_memory_wc workaround)
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add logic for fine grain clock gating logic for GFX v9.4.3. The feature
will be controlled using CG flags. Also, make a change so that RLC safe
mode entry/exit is done only once during CG update sequence.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On AMD APP APUs, to make UTCL2 snoop CPU caches, its not sufficient to
rely on xgmi connected flag so add the logic to use is_app_apu to
program the PDE_REQUEST_PHYSICAL bit correctly for gfxhub and mmhub
both.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFX v9_4_3, set MTYPE_UC for memory access over PCIe.

v4 - add missing indentation pointed out by Felix and add his
reviewed-by tag.
v3 - add missing logic for the svm path.
v2 - add amdgpu_xgmi_same_hive to separate access over xgmi from pcie
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Each compute cluster gets 8 compute queues in GFX v9.4.3. Fix the EOP
buffer allocation so that compute queue on every XCC gets a unique
address.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-and-Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ASICs with GFX 9.4.3 support 48-bit addressing.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the right register for semaphore release during invalidation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Setup rolling current_logical_xcc_id in MQD for GFX9.4.3
to ensure each queue starts at a different place and prevent
hotspotting issues. Also, remove updating current_logical_xcc_id
during queue update.
Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is no need to check return value, as the function internally
used - amdgpu_discovery_read_binary_from_vram() - returns void.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The AMDGPU_GFXHUB was bind to each xcc in the logical order.
Thus convert the node_id to logical xcc_id to index the
correct AMDGPU_GFXHUB. And "node_id / 4" can get the correct
AMDGPU_MMHUB0 index.
Signed-off-by: Le Ma <le.ma@amd.com>
Tested-by: Asad kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In GFX 9.4.3, there can be more than 8 SDMA engines.
As a result, extended_engine_sel and engine_sel fields
in MAP_QUEUES packet need to be updated to allow correct
mapping of SDMA queues to these SDMA engines.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Apply the GFXIP 9.4.3 specific snoop and mtype settings for various
scenarios such as APU, APU in Carveout mode and dGPU mode.

Note: This is expected to change due to:
1 - NPS > 1 support in future
2 - Hardware bugs found during initial asic bringup.

Cc: Graham Sider <graham.sider@amd.com>
Cc: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use a mask of available active clusters instead of using only the number
of active clusters.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SDMA instances per active cluster and SDMA instance mask are used
to find the number of active clusters.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move soc specific configuration details to aqua vanjaram specific file.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Just like the KIQ, KCQ need to clear the doorbell related regs as well
to avoid hangs when to load driver again after unloading.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On ASICs with PSPv13.0.6, TMR is reserved at boot time. There is no need
to allocate TMR region by driver. However, it's still required to send
SETUP_TMR command to PSP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize with the IP specific functions needed for GFXHUB, GFX and
SDMA.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add functions to suspend/resume GFX instances belonging to an XCP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add functions required to suspend/resume instances of SDMA which
are part of an XCP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add functions required for suspend/resume of GFXHUB instances which are
part of an XCP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFXv9.4.3, use SOC level partition switch implementation rather than
keeping them at GFX IP level. Change the exisiting implementation in
GFX IP for keeping partition mode and restrict it to only GFX related
switch.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add function to initialize soc configuration information for GC 9.4.3
ASICs. Use it to map IPs and other SOC related information once IP
configuration information is available through discovery.

For GC9.4.3 compute partition related callbacks are initialized as part
of configuration init.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switching the partition mode configuration of ASIC is SOC
level function rather than something at GFX core level. Add
partition mode switch functions as SOC specific callbacks.
Implement the XCP manager callbacks needed for partition
switch for GC 9.4.3 based ASICs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Within a device, an accelerator core partition can be constituted with
different IP instances. These partitions are spatial in nature. Number
of partitions which can exist at the same time depends on the 'partition
mode'. Add a manager entity which is responsible for switching between
different partition modes and maintaining partitions. It is also
responsible for suspend/resume of different partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SDMA 4.4.2 supports multiple instances. Add functions to support
handling of each SDMA instance separately.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GFXHUB 1.2 supports multiple XCC instances. Add XCC specific functions
to handle XCC instances separately.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add more XCC specific functions and use them from IP block functions.
RLC, CP functions are further split to have xcc specific versions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add 'xcc' prefix to xcc specific functions to distinguish from IP block
functions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On GPXIP 9.4.3 APU, in no carveout mode there is no real vram heap and
could be emulated by the driver over the interleaved NUMA system memory
and the APU could also  be in the carveout mode during early development
stage or otherwise for debugging purpose so introduce a new member in
amdgpu_gmc to figure out whether the APU is in the native mode as per
the production configuration. AMD_IS_APU cannot be used for Accelerated
Processing Platform APUs as it might be used in a different context on
previous generations or on small APUs.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Graham Sider <graham.sider@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Output IH cookie node_id and translate it to the corresponding AID id
and XCC id, to help debug the GPU page fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For driver de-init like rmmod operations those partition specific
attributes need to be removed accordingly.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>