The older code and current userspace assumed that this data
is the content of the Measurement Report element, starting
with the Measurement Token. Clarify this in the documentation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The pointer and corresponding length is always set in pairs
in cfg80211, so no need to have this strange defensive check
that also confuses static checkers. Clean it up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Fix kernel-doc warnings in FTM due to missing "struct" keyword.

Fixes 109 warnings from <net/cfg80211.h>:
../include/net/cfg80211.h:2838: warning: cannot understand function prototype: 'struct cfg80211_ftm_responder_stats '

and fixes 88 warnings from <net/mac80211.h>:
../include/net/mac80211.h:477: warning: cannot understand function prototype: 'struct ieee80211_ftm_responder_params '

Fixes: 81e54d08 ("cfg80211: support FTM responder configuration/statistics")
Fixes: bc847970 ("mac80211: support FTM responder configuration/statistics")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The legacy <linux/gpio.h> header is no longer in use by the
rfkill driver, so drop this include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Moved setting if_combination.num_different_channels/radar_detect_widths
into an else after use_chanctx. In the case of use_chanctx, these two
settings were getting overwritten.
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The iTXQs stop/wake queue mechanism involves a whole bunch
of locks and this is probably why the call to
ieee80211_wake_txqs is deferred to a tasklet when called from
__ieee80211_wake_queue.

Another advantage of that is that ieee80211_wake_txqs might
call the wake_tx_queue() callback and then the driver may
call mac80211 which will call it back in the same context.

The bug I saw is that when we send a deauth frame as a
station we do:

flush(drop=1)
tx deauth
flush(drop=0)

While we flush we stop the queues and wake them up
immediately after we finished flushing. The problem here is
that the tasklet that de-facto enables the queue may not have
run until we send the deauth. Then the deauth frame is sent
to the driver (which is surprising by itself), but the driver
won't get anything useful from ieee80211_tx_dequeue because
the queue is stopped (or more precisely because
vif->txqs_stopped[0] is true).
Then the deauth is not sent. Later on, the tasklet will run,
but that'll be too late. We'll already have removed all the
vif etc...

Fix this by calling ieee80211_wake_txqs synchronously if we
are not waking up the queues from the driver (we check the
reason to determine that). This makes the code really
convoluted because we may call ieee80211_wake_txqs from
__ieee80211_wake_queue. The latter assumes that
queue_stop_reason_lock has been taken by the caller and
ieee80211_wake_txqs may release the lock to send the frames.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Lubomir Rintel recently pointed out a dead link for o11s.org, and
repointed it to a still live, but also stale website.  As far as I
know, no one is updating the content at open80211s.org.

Since this Kconfig text was originally written, though, the 802.11s
mesh drafts were approved and ultimately rolled into 802.11 proper.
Meanwhile, the implementation has converged on the final standard,
so we can lose all of the text here and provide something that's a
little more helpful and accurate.
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This device takes over an existing network device and produces a
new one that appears like a wireless connection, returning enough canned
responses to nl80211 to satisfy a standard connection manager. If
necessary, it can also be set up one step removed from an existing
network device, such as through a vlan/80211Q or macvlan connection to
not disrupt the existing network interface.

To use it to wrap a bare ethernet connection:

ip link add link eth0 name wlan0 type virt_wifi

You may have to rename or otherwise hide the eth0 from your connection
manager, as the original network link will become unusuable and only
the wireless wrapper will be functional. This can also be combined with
vlan or macvlan links on top of eth0 to share the network between
distinct links, but that requires support outside the machine for
accepting vlan-tagged packets or packets from multiple MAC addresses.

This is being used for Google's Remote Android Virtual Device project,
which runs Android devices in virtual machines. The standard network
interfaces provided inside the virtual machines are all ethernet.
However, Android is not interested in ethernet devices and would rather
connect to a wireless interface. This patch allows the virtual machine
guest to treat one of its network connections as wireless rather than
ethernet, satisfying Android's network connection requirements.

We believe this is a generally useful driver for simulating wireless
network connections in other environments where a wireless connection is
desired by some userspace process but is not available.

This is distinct from other testing efforts such as mac80211_hwsim by
being a cfg80211 device instead of mac80211 device, allowing straight
pass-through on the data plane instead of forcing packaging of ethernet
data into mac80211 frames.
Signed-off-by: A. Cody Schuffelen <schuffelen@google.com>
Acked-by: Alistair Strachan <astrachan@google.com>
Acked-by: Greg Hartman <ghartman@google.com>
Acked-by: Tristan Muntsinger <muntsinger@google.com>
[make it a tristate]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Spelling errors found by codespell
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Creating radios during startup follows a different code path than
HWSIM_CMD_NEW_RADIO. The problem was that param.iftypes was not
being set to the deafult before calling mac80211_hwsim_new_radio
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When peering is in userspace, some implementations may want to control
which peers are accepted based on RSSI in addition to the information
elements being sent today.  Add signal level so that info is available
to clients.
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When userspace is controlling mesh routing, it may have better
knowledge about whether a mesh STA is connected to a mesh
gate than the kernel mpath table.  Add dot11MeshConnectedToMeshGate
to the mesh config so that such applications can explicitly
signal that a mesh STA is connected to a gate, which will then
be advertised in the beacon.
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Capture the current state of gate connectivity from the mesh
formation field in mesh config whenever we receive a beacon,
and report that via GET_STATION.  This allows applications
doing mesh peering in userspace to make peering decisions
based on peers' current upstream connectivity.
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The Connected to Mesh Gate subfield (802.11-2016 9.4.2.98.7) in the Mesh
Formation Info field is currently unset.  This field may be useful in
determining which MBSSes to join or which mesh STAs to peer with.

If this mesh STA is a gate, by having turned on mesh gate announcements,
or if we have a path to one (e.g. by having received RANNs) then set this
bit to 1.
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In some cases, like in the rsi driver hardware scan offload, there
may be scenarios in which hardware scan might not be available or
desirable.

Allow drivers to cope with this by letting them fall back to software
scan by returning the special value 1 from the hardware scan method.
Requested-by: Sushant Kumar Mishra <sushant2k1513@gmail.com>
Requested-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The mac80211_hwsim driver does not specify supported cipher types, which
in turn enables all ciphers to be supported in software. (see
net/mac80211/main.c:ieee80211_init_cipher_suites). Allowing ciphers
to be configurable is valuable for simulating older drivers that may
not support all ciphers.

This patch adds a new attribute:

 - HWSIM_ATTR_CIPHER_SUPPORT
	A u32 array/list of supported cipher types

This only allows enabling/disabling cipher types listed in the (new)
"hwsim_ciphers" array in mac80211_hwsim.c. Any unknown cipher type
will result in -EINVAL.
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
[fix some indentation, change to hwsim_known_ciphers(),
 add error messages, validate length better]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The mac80211_hwsim driver hard codes its supported interface types. For
testing purposes it would be valuable to allow changing these supported
types in order to simulate actual drivers than support a limited set of
iftypes. A new attribute was added to allow this:

- HWSIM_ATTR_IFTYPE_SUPPORT
	A u32 bit field of supported NL80211_IFTYPE_* bits

This will only enable/disable iftypes that mac80211_hwsim already
supports.

In order to accomplish this, the ieee80211_iface_limit structure needed
to be built dynamically to only include limit rules for iftypes that
the user requested to enable.
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
[fix some indentation, add netlink error string]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Avoid the need to kfree() the name in many places by moving
the name parsing last.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Let userspace learn about iftype changes by sending a notification
when handling the NL80211_CMD_SET_INTERFACE command.  There seems
to be no other place where the iftype can change: nl80211_set_interface
is the only caller of cfg80211_change_iface which is the only caller of
ops->change_virtual_intf.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When a wiphy changes its namespace, all interfaces are moved to the
new namespace as well. The network interfaces are properly announced
as leaving on the old and as appearing on the new namespace through
RTM_NEWLINK/RTM_DELLINK. On nl80211, however, these events are missing
for radios and their interfaces.

Add netlink announcements through nl80211 when switching namespaces,
so userspace can rely on these events to discover radios properly.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

There's nothing much for mac80211 to do, so only pass through
the requests with minimal checks and tracing. The driver must
call cfg80211's results APIs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add a new "peer measurement" API, that can be used to measure
certain things related to a peer. Right now, only implement
FTM (flight time measurement) over it, but the idea is that
it'll be extensible to also support measuring the necessary
things to calculate e.g. angle-of-arrival for WiGig.

The API is structured to have a generic list of peers and
channels to measure with/on, and then for each of those a
set of measurements (again, only FTM right now) to perform.

Results are sent to the requesting socket, including a final
complete message.

Closing the controlling netlink socket will abort a running
measurement.

v3:
 - add a bit to report "final" for partial results
 - remove list keeping etc. and just unicast out the results
   to the requester (big code reduction ...)
 - also send complete message unicast, and as a result
   remove the multicast group
 - separate out struct cfg80211_pmsr_ftm_request_peer
   from struct cfg80211_pmsr_request_peer
 - document timeout == 0 if no timeout
 - disallow setting timeout nl80211 attribute to 0,
   must not include attribute for no timeout
 - make MAC address randomization optional
 - change num bursts exponent default to 0 (1 burst, rather
   rather than the old default of 15==don't care)

v4:
 - clarify NL80211_ATTR_TIMEOUT documentation

v5:
 - remove unnecessary nl80211 multicast/family changes
 - remove partial results bit/flag, final is sufficient
 - add max_bursts_exponent, max_ftms_per_burst to capability
 - rename "frames per burst" -> "FTMs per burst"

v6:
 - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down()
   and call it in leave, so the device can't go down with any
   pending measurements

v7:
 - wording fixes (Lior)
 - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior)

v8:
 - copyright statements
 - minor coding style fixes
 - fix error path leak
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add a helper function nl_set_extack_cookie_u64() to use a u64 as
the netlink extended ACK cookie, to avoid having to open-code it
in any users of the cookie.

A u64 should be sufficient for most subsystems though we allow
for up to 20 bytes right now. This also matches the cookies in
nl80211 where I intend to use this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We have a bool and an __le16 called qos, rename the inner __le16
to 'qoshdr' to make it more obvious and to avoid sparse warnings.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We have a macro here that uses an inner variable 'i' that
also exists in the outer scope - use '_i' in the macro.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We have a pointer called 'tidstats' that shadows a bool function
argument with the same name, but we actually only use it once so
just remove the pointer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This variable shadows something that gets generated inside
the tracing macros, which causes sparse to warn. Avoid it
so sparse output is more readable, even if it doesn't seem
to cause any trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This variable shadows something that gets generated inside
the tracing macros, which causes sparse to warn. Avoid it
so sparse output is more readable, even if it doesn't seem
to cause any trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

As added in 3e59020a ("net: bql: add __netdev_tx_sent_queue()"), which
 see for performance rationale.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michał Mirosław says:

====================
net: Remove VLAN_TAG_PRESENT from drivers

This series removes VLAN_TAG_PRESENT use from network drivers in
preparation to removing its special meaning.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a minimal change to allow removing of VLAN_TAG_PRESENT.
It leaves OVS unable to use CFI bit, as fixing this would need
a deeper surgery involving userspace interface.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

This just removes VLAN_TAG_PRESENT use.  VLAN TCI=0 special meaning is
deeply embedded in the driver code and so is left as is.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

return -ENOMEM directly instead of assigning it in a variable
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current driver dynamically allocates an skb and maps it as DMA Rx
buffer. In order to prepare for upcoming XDP changes, let's introduce a
different allocation scheme.
Buffers are allocated dynamically and mapped into hardware.
During the Rx operation the driver uses build_skb() to produce the
necessary buffers for the network stack.
This change increases performance ~15% on 64b packets with smmu disabled
and ~5% with smmu enabled
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Interferences on the SPI line could distort the response of
available buffer space. So at least we should check that the
response doesn't exceed the maximum available buffer space.
In error case increase a new error counter and retry it later.
This behavior avoids buffer errors in the QCA7000, which
results in an unnecessary chip reset including packet loss.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.
Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: updates 2018-11-08

please apply the following qeth patches to net-next.

The first patch allows one more device type to query the FW for a MAC address,
the others are all basically just removal of duplicated or unused code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth_l3_setup_netdev() checks if the hsuid attribute is set on the qeth
device, and propagates it to the net_device. In the past this was needed
to pick up any hsuid that was set before allocation of the net_device.

With commit d3d1b205 ("s390/qeth: allocate netdevice early") this
is no longer necessary, qeth_l3_dev_hsuid_store() always stores the
hsuid straight into dev->perm_addr.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>