- 09 Nov, 2015 40 commits
-
-
Peter Zijlstra authored
commit 275d7d44 upstream. Poma (on the way to another bug) reported an assertion triggering: [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90 [<ffffffff81150822>] __module_address+0x32/0x150 [<ffffffff81150956>] __module_text_address+0x16/0x70 [<ffffffff81150f19>] symbol_put_addr+0x29/0x40 [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core] Laura Abbott <labbott@redhat.com> produced a patch which lead us to inspect symbol_put_addr(). This function has a comment claiming it doesn't need to disable preemption around the module lookup because it holds a reference to the module it wants to find, which therefore cannot go away. This is wrong (and a false optimization too, preempt_disable() is really rather cheap, and I doubt any of this is on uber critical paths, otherwise it would've retained a pointer to the actual module anyway and avoided the second lookup). While its true that the module cannot go away while we hold a reference on it, the data structure we do the lookup in very much _CAN_ change while we do the lookup. Therefore fix the comment and add the required preempt_disable(). Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Fixes: a6e6abd5 ("module: remove module_text_address()") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cathy Avery authored
commit a54c8f0f upstream. xen-blkfront will crash if the check to talk_to_blkback() in blkback_changed()(XenbusStateInitWait) returns an error. The driver data is freed and info is set to NULL. Later during the close process via talk_to_blkback's call to xenbus_dev_fatal() the null pointer is passed to and dereference in blkfront_closing. Signed-off-by:
Cathy Avery <cathy.avery@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Laura Abbott authored
commit fd7cd061 upstream. We received several reports of systems rebooting and powering on after an attempted shutdown. Testing showed that setting XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT quirk allowed the system to shutdown as expected for LynxPoint-LP xHCI controllers. Set the quirk back. Note that the quirk was originally introduced for LynxPoint and LynxPoint-LP just for this same reason. See: commit 638298dc ("xhci: Fix spurious wakeups after S5 on Haswell") It was later limited to only concern HP machines as it caused regression on some machines, see both bug and commit: Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171 commit 6962d914 ("xhci: Limit the spurious wakeup fix only to HP machines") Later it was discovered that the powering on after shutdown was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP machine suffered from spontaneous resume from S3 (which should not be related to the SPURIOUS_WAKEUP quirk at all). An attempt to fix this then removed the SPURIOUS_WAKEUP flag usage completely. commit b45abacd ("xhci: no switching back on non-ULT Haswell") Current understanding is that LynxPoint-LP (Haswell ULT) machines need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and plain Lynxpoint (Haswell) machines may _not_ have the quirk set otherwise they again will restart. Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Oliver Neukum <oneukum@suse.com> [Added more history to commit message -Mathias] Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 3b4739b8 upstream. If a host fails to wake up a isochronous SuperSpeed device from U1/U2 in time for a isoch transfer it will generate a "No ping response error" Host will then move to the next transfer descriptor. Handle this case in the same way as missed service errors, tag the current TD as skipped and handle it on the next transfer event. Signed-off-by:
-
Hezi Shahmoon authored
commit 0729a049 upstream. Commit 00d8689b ("i2c: mv64xxx: rework offload support to fix several problems") completely reworked the offload support, but left a debugging-related "return false" at the beginning of the mv64xxx_i2c_can_offload() function. This has the unfortunate consequence that offloading is in fact never used, which wasn't really the intention. This commit fixes that problem by removing the bogus "return false". Fixes: 00d8689b ("i2c: mv64xxx: rework offload support to fix several problems") Signed-off-by:
Hezi Shahmoon <hezi@marvell.com> [Thomas: reworked commit log and title.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Bjørn Mork authored
commit f504ab18 upstream. New device IDs shamelessly lifted from the vendor driver. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Frederic Danis authored
commit f967fc8f upstream. This reverts commit 9119fba0. This commit prevents from sending "big" file using Bluetooth. When sending a lot of data quickly through the Bluetooth interface, and after a variable amount of data sent, transfer fails with error: kernel: [ 415.247453] Bluetooth: hci0 hardware error 0x00 Found on T100TA. After reverting this commit, send works fine for any file size. Signed-off-by:
Frederic Danis <frederic.danis@linux.intel.com> Fixes: 9119fba0 (serial: 8250_dma: don't bother DMA with small transfers) Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Mike Snitzer authored
commit 4dcb8b57 upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2871c69e upstream. Commit 4c7e3093 ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.cSigned-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Will Deacon authored
commit 9702970c upstream. This reverts commit e306dfd0. With this patch applied, we were the only architecture making this sort of adjustment to the PC calculation in the unwinder. This causes problems for ftrace, where the PC values are matched against the contents of the stack frames in the callchain and fail to match any records after the address adjustment. Whilst there has been some effort to change ftrace to workaround this, those patches are not yet ready for mainline and, since we're the odd architecture in this regard, let's just step in line with other architectures (like arch/arm/) for now. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
H. Nikolaus Schaller authored
commit 38850d78 upstream. Commit 8a603f91 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") unfortunately introduced a bug created but not found during discussion and patch simplification. Reported-by:
Efraim Yawitz <efraim.yawitz@gmail.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Fixes: 8a603f91 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
H. Nikolaus Schaller authored
commit 8a603f91 upstream. If the host toolchain is not glibc based then the arm kernel build fails with HOSTCC arch/arm/vdso/vdsomunge arch/arm/vdso/vdsomunge.c:48:22: fatal error: byteswap.h: No such file or directory Observed: with omap2plus_defconfig and compile on Mac OS X with arm ELF cross-compiler. Reason: byteswap.h is a glibc only header. Solution: replace by private byte-swapping macros (taken from arch/mips/boot/elf2ecoff.c and kindly improved by Russell King) Tested to compile on Mac OS X 10.9.5 host. Signed-off-by:
-
Timo Sigurdsson authored
commit eaeef1ad upstream. sun7i-a20.dtsi contains a cpufreq operating point at 0.9 volts. The minimum CPU voltage for the Allwinner A20 SoC, however, is 1.0 volts. Thus, raise the voltage for the lowest operating point to 1.0 volts in order to stay within the SoC specifications. It is an undervolted setting that isn't stable across all SoCs and boards out there. Fixes: d96b7161 ("ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi") Signed-off-by:
Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by:
Iain Paton <ipaton0@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Tomi Valkeinen authored
commit 7e381ec6 upstream. LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to be kept always powered (see commit 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled depending on whether an SD card is inserted or not. This patch sets LDO1 regulator to always-on. This patch has a side effect of fixing another issue, HDMI DDC not working when SD card is not inserted: Why this happens is that the tpd12s015 (HDMI level shifter/ESD protection chip) has LS_OE GPIO input, which needs to be enabled for the HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD. So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays off. The proper fix for the HDMI DDC issue would be to maybe have the pinctrl framework manage the pin specific power. Apparently this fixes also a third issue (copy paste from Kishon's patch): ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fixes: 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15") Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Louis McCarthy <compeoree@gmail.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Alim Akhtar authored
commit b8bb9baa upstream. Since commit 2fad972d ("ARM: dts: Add mclk entry for Peach boards"), sound card detection is broken on peach boards and gives below errors: [ 3.630457] max98090 7-0010: MAX98091 REVID=0x51 [ 3.634233] max98090 7-0010: use default 2.8v micbias [ 3.640985] snow-audio sound: HiFi <-> 3830000.i2s mapping ok [ 3.645307] max98090 7-0010: Invalid master clock frequency [ 3.650824] snow-audio sound: ASoC: Peach-Pi-I2S-MAX98091 late_probe() failed: -22 [ 3.658914] snow-audio sound: snd_soc_register_card failed (-22) [ 3.664366] snow-audio: probe of sound failed with error -22 This patch adds missing assigned-clocks and assigned-clock-parents for pmu_system_controller node which is used as "mclk" for audio codec. Fixes: 2fad972d ("ARM: dts: Add mclk entry for Peach boards") Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Marcin Wojtas authored
commit db347f1a upstream. This commit enables standby support on Armada 385 DB-AP board, because the PM initalization routine requires "marvell,armada380" compatible string for all Armada 38x-based platforms. Beside the compatible "marvell,armada38x" was wrong and should be fixed in the stable kernels too. [gregory.clement@free-electrons.com: add information, about the fixes] Fixes: e5ee1281 ("ARM: mvebu: Add Armada 385 Access Point Development Board support") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Florian Fainelli authored
commit d836ace6 upstream. DSA expects the host_dev pointer to be the device structure associated with the MDIO bus controller driver. First commit breaking that was c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver"), and then, it got completely under the radar for a while. Reported-by:
Frans van de Wiel <fvdw@fvdw.eu> Fixes: c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit 6d69bb53 upstream. Mapping an image with a long parent chain (e.g. image foo, whose parent is bar, whose parent is baz, etc) currently leads to a kernel stack overflow, due to the following recursion in the reply path: rbd_osd_req_callback() rbd_obj_request_complete() rbd_img_obj_callback() rbd_img_parent_read_callback() rbd_obj_request_complete() ... Limit the parent chain to 16 images, which is ~5K worth of stack. When the above recursion is eliminated, this limit can be lifted. Fixes: http://tracker.ceph.com/issues/12538Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> [idryomov@gmail.com: backport to 4.1: rbd_dev->opts] Signed-off-by:
-
Ilya Dryomov authored
commit 1f2c6651 upstream. Currently we leak parent_spec and trigger a "parent reference underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails. The problem is we take the !parent out_err branch and that only drops refcounts; parent_spec that would've been freed had we called rbd_dev_unparent() remains and triggers rbd_warn() in rbd_dev_parent_put() - at that point we have parent_spec != NULL and parent_ref == 0, so counter ends up being -1 after the decrement. Redo rbd_dev_probe_parent() to fix this. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Ronny Hegewald authored
commit bae818ee upstream. rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Signed-off-by:
Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] [idryomov@gmail.com: backport to 3.18-4.2: context] Signed-off-by:
-
Dan Carpenter authored
commit eda7d0f3 upstream. "num_read" is in byte units but we are write u16s so we end up write twice as much as intended. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Linus Walleij authored
commit 61fd5630 upstream. This accelerometer accidentally either emits a DRDY signal or an IRQ signal. Accidentally I activated the IRQ signal as I thought it was analogous to the interrupt generator on other ST accelerometers. This was wrong. After this patch generic_buffer gives a nice stream of accelerometer readings. Fixes: 3acddf74 "iio: st-sensors: add support for lis3lv02d accelerometer" Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Alexandre Belloni authored
commit b94e2280 upstream. 0° Kelvin is actually −273.15°C, not -272.15°C. Fix the temperature offset. Also improve the comment explaining the calculation. Reported-by:
Janusz Użycki <j.uzycki@elpromaelectronics.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alex Deucher authored
commit 4cee6a90 upstream. So that the bl encoder will be null if the GPU does not control the backlight. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit ae93580e upstream. If driver backlight control is disabled, either by driver parameter or default per-asic setting, revert to the old behavior. Fixes a regression in commit: 4281f46eReviewed-by:
-
Alex Deucher authored
commit 49abb266 upstream. Fixes a harmless error message caused by: 51a4726bSigned-off-by:
-
Chris Wilson authored
commit cc917ab4 upstream. Pinning a userptr onto the hardware raises interesting questions about the lifetime of such a surface as the framebuffer extends that life beyond the client's address space. That is the hardware will need to keep scanning out from the backing storage even after the client wants to remap its address space. As the hardware pins the backing storage, the userptr becomes invalid and this raises a WARN when the clients tries to unmap its address space. The situation can be even more complicated when the buffer is passed between processes, between a client and display server, where the lifetime and hardware access is even more confusing. Deny it. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 8e7a65aa upstream. We accidentally lost the initial DPLL register write in 1c4e0274 drm/i915: Fix DVO 2x clock enable on 830M The "three times for luck" hack probably saved us from a total disaster. But anyway, bring the initial write back so that the code actually makes some sense. Reported-and-tested-by:
Nick Bowler <nbowler@draconx.ca> References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com Cc: Nick Bowler <nbowler@draconx.ca> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit 40a24488 upstream. In order to flush the results from in-batch pipecontrol writes (used for example in glQuery) before declaring the batch complete (and so declaring the query results coherent), we need to set the FlushEnable bit in our flushing pipecontrol. The FlushEnable bit "waits until all previous writes of immediate data from post-sync circles are complete before executing the next command". I get GPU hangs on byt without flushing these writes (running ue4). piglit has examples where the flush is required for correct rendering. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit 2a7d44f4 upstream. PWM fan control is only available with DPM. If DPM disabled, don't expose the PWM fan controls to avoid a crash. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92524Signed-off-by:
-
Ilia Mirkin authored
commit 2a6c521b upstream. On nv50+, we restrict the valid domains to just the one where the buffer was originally created. However after the buffer is evicted to system memory, we might move it back to a different domain that was not originally valid. When sharing the buffer and retrieving its GEM_INFO data, we still want the domain that will be valid for this buffer in a pushbuf, not the one where it currently happens to be. This resolves fdo#92504 and several others. These are due to suspend evicting all buffers, making it more likely that they temporarily end up in the wrong place. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Florian Westphal authored
commit bb387002 upstream. interval displays the probability and vice versa. Fixes: 6adc4a22 ("fault-inject: add ratelimit option") Acked-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit 296291cd upstream. Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by:
Jan Kara <jack@suse.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Kővágó, Zoltán authored
commit 8a53554e upstream. When multiple GOP devices exists, but none of them implements ConOut, the code should just choose the first GOP (according to the comments). But currently 'fb_base' will refer to the last GOP, while other parameters to the first GOP, which will likely result in a garbled display. I can reliably reproduce this bug using my ASRock Z87M Extreme4 motherboard with CSM and integrated GPU disabled, and two PCIe video cards (NVidia GT640 and GTX980), booting from efi-stub (booting from grub works fine). On the primary display the ASRock logo remains and on the secondary screen it is garbled up completely. Signed-off-by:
Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444659236-24837-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Charles Keepax authored
commit 97aff2c0 upstream. There are 24 EQ registers not 25, I suspect this bug came about because the registers start at EQ1 not zero. The bug is relatively harmless as the extra register written is an unused one. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Charles Keepax authored
commit 34198710 upstream. SX_TLV controls are intended for situations where the register behind the control has some non-zero value indicating the minimum gain and then gains increasing from there and eventually overflowing through zero. Currently every CODEC implementing these controls specifies the minimum as the non-zero value for the minimum and the maximum as the number of gain settings available. This means when the info callback subtracts the minimum value from the maximum value to calculate the number of gain levels available it is actually under reporting the available levels. This patch fixes this issue by adding a new snd_soc_info_volsw_sx callback that does not subtract the minimum value. Fixes: 1d99f243 ("ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV") Signed-off-by:
Brian Austin <brian.austin@cirrus.com> Tested-by:
-
Takashi Iwai authored
commit d289619a upstream. The HDA codec driver issues snd_hda_codec_reset() at the error path of PCM build. This was needed in the earlier code base, but the recent rewrite to use the standard bus binding made this a deadlock: modprobe D 0000000000000005 0 720 716 0x00000080 Call Trace: [<ffffffff816a5dbe>] schedule+0x3e/0x90 [<ffffffff816a61a5>] schedule_preempt_disabled+0x15/0x20 [<ffffffff816a7ae5>] __mutex_lock_slowpath+0xb5/0x120 [<ffffffff816a7b6b>] mutex_lock+0x1b/0x30 [<ffffffff8148656b>] device_release_driver+0x1b/0x30 [<ffffffff81485c15>] bus_remove_device+0x105/0x180 [<ffffffff814822b9>] device_del+0x139/0x260 [<ffffffffa05e0ec5>] snd_hdac_device_unregister+0x25/0x30 [snd_hda_core] [<ffffffffa074fa6a>] snd_hda_codec_reset+0x2a/0x70 [snd_hda_codec] [<ffffffffa075007b>] snd_hda_codec_build_pcms+0x18b/0x1b0 [snd_hda_codec] [<ffffffffa074a44e>] hda_codec_driver_probe+0xbe/0x140 [snd_hda_codec] [<ffffffff81486ac4>] driver_probe_device+0x1f4/0x460 [<ffffffff81486dc0>] __driver_attach+0x90/0xa0 [<ffffffff81484844>] bus_for_each_dev+0x64/0xa0 [<ffffffff814862de>] driver_attach+0x1e/0x20 [<ffffffff81485e7b>] bus_add_driver+0x1eb/0x280 [<ffffffff81487680>] driver_register+0x60/0xe0 [<ffffffffa074a0da>] __hda_codec_driver_register+0x5a/0x60 [snd_hda_codec] [<ffffffffa070a01e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [<ffffffff810002f3>] do_one_initcall+0xb3/0x200 [<ffffffff816a1fc5>] do_init_module+0x60/0x1f8 [<ffffffff810ee5c3>] load_module+0x1653/0x1bd0 [<ffffffff810eed48>] SYSC_finit_module+0x98/0xc0 [<ffffffff810eed8e>] SyS_finit_module+0xe/0x10 [<ffffffff816aa032>] entry_SYSCALL_64_fastpath+0x16/0x75 The simple fix is just to remove this call, since we don't need to think about unbinding at there any longer. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=948758Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit e8d65a8d upstream. Add the appropriate quirk to indicate the Lenovo G50-80 has a stereo mic input where one channel has reverse polarity. Alsa-info available at: https://launchpadlibrarian.net/220846272/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1504778Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Arnd Bergmann authored
commit 4a5d69b7 upstream. The vgic code on ARM is built for all configurations that enable KVM, but the parent_data field that it references is only present when CONFIG_IRQ_DOMAIN_HIERARCHY is set: virt/kvm/arm/vgic.c: In function 'kvm_vgic_map_phys_irq': virt/kvm/arm/vgic.c:1781:13: error: 'struct irq_data' has no member named 'parent_data' This flag is implied by the GIC driver, and indeed the VGIC code only makes sense if a GIC is present. This changes the CONFIG_KVM symbol to always select GIC, which avoids the issue. Fixes: 662d9715 ("arm/arm64: KVM: Kill CONFIG_KVM_ARM_{VGIC,TIMER}") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Antti Palosaari authored
commit d18ca5b7 upstream. Add lock to prevent concurrent access for control message as control message function uses shared buffer. Without the lock there may be remote control polling which messes the buffer causing IO errors. Increase buffer size and add check for maximum supported message length. Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391 Fixes: c56222a6 ("[media] rtl28xxu: move usb buffers to state") Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
