- 25 Nov, 2019 12 commits
-
-
Chris Wilson authored
The major drawback of commit 7e34f4e4 ("drm/i915/gen8+: Add RC6 CTX corruption WA") is that it disables RC6 while Skylake (and friends) is active, and we do not consider the GPU idle until all outstanding requests have been retired and the engine switched over to the kernel context. If userspace is idle, this task falls onto our background idle worker, which only runs roughly once a second, meaning that userspace has to have been idle for a couple of seconds before we enable RC6 again. Naturally, this causes us to consume considerably more energy than before as powersaving is effectively disabled while a display server (here's looking at you Xorg) is running. As execlists will get a completion event as each context is completed, we can use this interrupt to queue a retire worker bound to this engine to cleanup idle timelines. We will then immediately notice the idle engine (without userspace intervention or the aid of the background retire worker) and start parking the GPU. Thus during light workloads, we will do much more work to idle the GPU faster... Hopefully with commensurate power saving! v2: Watch context completions and only look at those local to the engine when retiring to reduce the amount of excess work we perform. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315 References: 7e34f4e4 ("drm/i915/gen8+: Add RC6 CTX corruption WA") References: 2248a283 ("drm/i915/gen8+: Add RC6 CTX corruption WA") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk (cherry picked from commit 4f88f874) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
In the next patch, we will introduce a new asynchronous retirement worker, fed by execlists CS events. Here we may queue a retirement as soon as a request is submitted to HW (and completes instantly), and we also want to process that retirement as early as possible and cannot afford to postpone (as there may not be another opportunity to retire it for a few seconds). To allow the new async retirer to run in parallel with our submission, pull the __i915_request_queue (that passes the request to HW) inside the timelines spinlock so that the retirement cannot release the timeline before we have completed the submission. v2: Actually to play nicely with engine_retire, we have to raise the timeline.active_lock before releasing the HW. intel_gt_retire_requsts() is still serialised by the outer lock so they cannot see this intermediate state, and engine_retire is serialised by HW submission. Signed-off-by:
-
Chris Wilson authored
I rushed a last minute correction to cancel_port_requests() to prevent the snooping of *execlists->active as the inflight array was being updated, without noticing we iterated the inflight array starting from active! Oops. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387 Fixes: 97f9af78 ("drm/i915/gt: Mark the execlists->active as the primary volatile access") Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk (cherry picked from commit da0ef77e) [Joonas: Fixed Fixes: tag to match drm-intel-next-fixes] Signed-off-by:
-
Chris Wilson authored
Since we want to do a lockless read of the current active request, and that request is written to by process_csb also without serialisation, we need to instruct gcc to take care in reading the pointer itself. Otherwise, we have observed execlists_active() to report 0x40. [ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4 [ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000 [ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 } [ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940 which is impossible! The answer is that as we keep the existing execlists->active pointing into the array as we copy over that array, the unserialised read may see a partial pointer value. Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk (cherry picked from commit 331bf905) Signed-off-by:
-
Chris Wilson authored
In commit a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend"), I erroneously concluded that we last modify the engine inside __i915_request_commit() meaning that we could enable concurrent submission for userspace as we enqueued this request. However, this falls into a trap with other users of the engine->kernel_context waking up and submitting their request before the idle-switch is queued, with the result that the kernel_context is executed out-of-sequence most likely upsetting the GPU and certainly ourselves when we try to retire the out-of-sequence requests. As such we need to hold onto the effective engine->kernel_context mutex lock (via the engine pm mutex proxy) until we have finish queuing the request to the engine. v2: Serialise against concurrent intel_gt_retire_requests() v3: Describe the hairy locking scheme with intel_gt_retire_requests() for future reference. v4: Combine timeline->lock and engine pm release; it's hairy. Fixes: a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend") Signed-off-by:
-
Chris Wilson authored
The general concept was that intel_timeline.active_count was locked by the intel_timeline.mutex. The exception was for power management, where the engine->kernel_context->timeline could be manipulated under the global wakeref.mutex. This was quite solid, as we always manipulated the timeline only while we held an engine wakeref. And then we started retiring requests outside of struct_mutex, only using the timelines.active_list and the timeline->mutex. There we started manipulating intel_timeline.active_count outside of an engine wakeref, and so introduced a race between __engine_park() and intel_gt_retire_requests(), a race that could result in the engine->kernel_context not being added to the active timelines and so losing requests, which caused us to keep the system permanently powered up [and unloadable]. The race would be easy to close if we could take the engine wakeref for the timeline before we retire -- except timelines are not bound to any engine and so we would need to keep all active engines awake. The alternative is to guard intel_timeline_enter/intel_timeline_exit for use outside of the timeline->mutex. Fixes: e5dadff4 ("drm/i915: Protect request retirement with timeline->mutex") Signed-off-by:
-
Chris Wilson authored
Previously, we assumed we could use mutex_trylock() within an atomic context, falling back to a worker if contended. However, such trickery is illegal inside interrupt context, and so we need to always use a worker under such circumstances. As we normally are in process context, we can typically use a plain mutex, and only defer to a work when we know we are being called from an interrupt path. Fixes: 51fbd8de ("drm/i915/pmu: Atomically acquire the gt_pm wakeref") References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") References: https://bugs.freedesktop.org/show_bug.cgi?id=111626Signed-off-by:
-
Chris Wilson authored
When waiting for idle, serialise with any ongoing callback so that it will have completed before completing the wait. Signed-off-by:
-
Chris Wilson authored
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is both declared and defined. Reported-by: kbuild-all@lists.01.org Signed-off-by:
-
Tvrtko Ursulin authored
Commit 750e76b4 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT") changed the engine query to iterate over uabi engines but left the buffer size calculation look at the physical engine count. Difference has no practical consequence but it is nicer to align both queries. Signed-off-by:
-
Matt Roper authored
The bspec initially provided a single DKL PHY vswing table for both HDMI and DP, but was recently updated to include an independent table for HDMI. Bspec: 49292 Fixes: 978c3e53 ("drm/i915/tgl: Add dkl phy programming sequences") Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 362bfb99) Signed-off-by:
-
Matt Roper authored
The bspec was recently updated with new cdclk -> voltage level tables to accommodate the new 324/326.4 cdclk values. Bspec: 21809 Fixes: 63c9dae7 ("drm/i915/ehl: Add voltage level requirement table") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
-
- 22 Nov, 2019 1 commit
-
-
Chris Wilson authored
From inside an active timeline in the execbuf ioctl, we may try to reclaim some space in the GGTT. We need GGTT space for all objects on !full-ppgtt platforms, and for context images everywhere. However, to free up space in the GGTT we may need to remove some pinned objects (e.g. context images) that require flushing the idle barriers to remove. For this we use the big hammer of intel_gt_wait_for_idle() However, commit 7936a22d ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()") will continue spinning on the wait if a timeline is active but lacks requests, as is the case during execbuf reservation. Spinning forever is quite time consuming, so revert that commit and start again. In practice, the effect commit 7936a22d was trying to achieve is accomplished by commit 1683d24c ("drm/i915/gt: Move new timelines to the end of active_list"), so there is no immediate rush to replace the looping. Testcase: igt/gem_exec_reloc/basic-range Fixes: a46bfdc8 ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()") References: 1683d24c ("drm/i915/gt: Move new timelines to the end of active_list") Signed-off-by:
-
- 20 Nov, 2019 2 commits
-
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
Merge tag 'gvt-next-fixes-2019-11-12' of https://github.com/intel/gvt-linux into drm-intel-next-fixes gvt-next-fixes-2019-11-12 - Remove PVINFO read for initial state (Tina) Signed-off-by:
-
Chris Wilson authored
As we want to be able to run inside atomic context for retiring the i915_active, and we are no longer allowed to abuse mutex_trylock, split the tree management portion of i915_active.mutex into an irq-safe spinlock. References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") References: https://bugs.freedesktop.org/show_bug.cgi?id=111626 Fixes: 274cbf20 ("drm/i915: Push the i915_active.retire into a worker") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114172535.1116-1-chris@chris-wilson.co.uk (cherry picked from commit c9ad602f) Signed-off-by:
-
- 18 Nov, 2019 10 commits
-
-
Jani Nikula authored
It's supposed to be just a const pointer. Fixes: 074c77e3 ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115120440.17883-1-jani.nikula@intel.com (cherry picked from commit 48ea97fa) Signed-off-by:
-
Don Hiatt authored
On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by:KiteStramuort <kitestramuort@autistici.org> Reported-by:
S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Tomas Janousek <tomi@nomi.cz> Signed-off-by:
Don Hiatt <don.hiatt@intel.com> Reviewed-by:
-
Chris Wilson authored
Our callers fall into two categories, those passing timeout=0 who just want to flush request retirements and those passing a timeout that need to wait for submission completion (e.g. intel_gt_wait_for_idle()). Currently, we only wait for a snapshot of timelines at the start of the wait (but there was an expectation that new requests would cause timelines to appear at the end). However, our callers, such as intel_gt_wait_for_idle() before suspend, do require us to wait for the power management requests emitted by retirement as well. If we don't, then it takes an extra second or two for the background worker to flush the queue and mark the GT as idle. Fixes: 7e805762 ("drm/i915: Drop struct_mutex from around i915_retire_requests()") Signed-off-by:
-
Imre Deak authored
The workaround to disable coarse power gating is still needed on SKL GT3/GT4 machines and since the RC6 context corruption was discovered by the hardware team also on all GEN9 machines. Restore applying the workaround. Fixes: c1132367 ("drm/i915: Extract GT render sleep (rc6) management") Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
fbdev uses the physical address of our framebuffer for its fb_mmap() routine. While we need to adapt this address for the new io BAR, we have to fix v5.4 first! The simplest fix is to restore the smem back to v5.3 and we will then probably have to implement our fbops->fb_mmap() callback to handle local memory. Reported-by:
Neil MacLeod <freedesktop@nmacleod.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256 Fixes: 5f889b9a ("drm/i915: Disregard drm_mode_config.fb_base") Signed-off-by:
-
Lionel Landwerlin authored
I'm observing incoherence metric values, changing from run to run. It appears the patches introducing noa wait & reconfiguration from command stream switched places in the series multiple times during the review. This lead to the dependency of one onto the order to go missing... Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 15d0ace1 ("drm/i915/perf: execute OA configuration from command stream") Reviewed-by:
-
Bruce Chang authored
io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture (if there is no aperture preallocated for the use of error capture), but the error capture and compression routines are now run in normal context: <3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653 <3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test <4> [113.319900] no locks held by debugfs_test/678. <3> [113.321002] Preemption disabled at: <4> [113.321130] [<ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915] <4> [113.327259] Call Trace: <4> [113.327871] dump_stack+0x67/0x9b <4> [113.328683] ___might_sleep+0x167/0x250 <4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110 <4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915] <4> [113.335951] compress_page+0x7c/0x100 [i915] <4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915] <4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915] However, it is not a good idea to run the slow compression inside atomic context, so we choose not to. Fixes: 895d8ebe ("drm/i915: error capture with no ggtt slot") Signed-off-by:
Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by:
Brian Welty <brian.welty@intel.com> Reviewed-by:
-
José Roberto de Souza authored
TRANS_DDI_MST_TRANSPORT_SELECT is 2 bits wide not 3, it was taking one bit from EDP/DSI Input Select. Fixes: b3545e08 ("drm/i915/tgl: add support to one DP-MST stream") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-1-jose.souza@intel.com (cherry picked from commit bb747fa5) Signed-off-by:
-
Imre Deak authored
According to internal documents I found for CMP PCHs the PCI ID 0xA3C1 belongs to a CMP-V chipset. Based on the same docs the programming of the PCH is compatible with that of KBP. Fix up my previous wrong assumption accordingly using the SPT programming which in turn is the basis for KBP. The original bug reporter verified that this is the correct PCH identification (the only way we'll program valid DDC pin-pair values to the GMBUS register) and the Windows team uses the same identification (that is using the KBP programming model for this PCH). I filed the necessary Bspec update requests (BSpec/33734). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051 Fixes: 37c92dc3 ("drm/i915: Add new CNL PCH ID seen on a CML platform") Reported-and-tested-by:
Cyrus <cyrus.lien@canonical.com> Cc: Cyrus <cyrus.lien@canonical.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Chris Wilson authored
Throw in a flush_work() to specifically flush the context cleanup work before the module is unloaded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112248 Fixes: a4e7ccda ("drm/i915: Move context management under GEM") Signed-off-by:
-
- 15 Nov, 2019 2 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Two minor cleanups / fixes for -next. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m=20=28VMware=29?= Link: https://patchwork.freedesktop.org/patch/msgid/20191114131703.8607-1-thomas_os@shipmail.org
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - PMU "Frequency" is reported as accumulated cycles - Avoid OOPS in dumb_create IOCTL when no CRTCs - Mitigation for userptr put_pages deadlock with trylock_page - Fix to avoid freeing heartbeat request too early - Fix LRC coherency issue - Fix Bugzilla #112212: Avoid screen corruption on MST - Error path fix to unlock context on failed context VM SETPARAM - Always consider holding preemption a privileged op in perf/OA - Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV - Protect context while grabbing its name for the request - Don't resize aliasing ppGTT size - Smaller fixes picked by tooling Signed-off-by:
-
- 14 Nov, 2019 4 commits
-
-
YueHaibing authored
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c:339:22: warning: variable srf set but not used [-Wunused-but-set-variable] 'srf' is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Thomas Hellstrom authored
Drivers like vmwgfx may want to test whether the dma page pool is present or not. Since it's activated by default by TTM if compiled-in, define a hidden configuration option that the driver can test for. Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com>
-
Dave Airlie authored
This backmerges the branch that ended up in Linus' tree. It removes all the changes for the rc6 patches from Linus' tree in favour of a patch that is based on a large refactor that occured. Otherwise it all looks good. Signed-off-by: -
Imre Deak authored
In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: - Rebased on latest upstream gt_pm refactoring. v6: - s/i915_rc6_/intel_rc6_/ - Don't return a value from i915_rc6_ctx_wa_check(). v7: - Rebased on latest gt rc6 refactoring. Signed-off-by:
-
- 13 Nov, 2019 7 commits
-
-
Dave Airlie authored
This is a pretty simple improvement that allows to find encoder as the one and only (ARC PGU doesn't support more than one) endpoint instead of using non-standard "encoder-slave" property. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Fix memory leak in gpu debugfs node's release (Johan) Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-11-08: amdgpu: - Enable VCN dynamic powergating on RV/RV2 - Fixes for Navi14 - Misc Navi fixes - Fix MSI-X tear down - Misc Arturus fixes - Fix xgmi powerstate handling - Documenation fixes scheduler: - Fix static code checker warning - Fix possible thread reactivation while thread is stopped - Avoid cleanup if thread is parked radeon: - SI dpm fix ported from amdgpu Signed-off-by:
-
Johan Hovold authored
If a process is interrupted while accessing the "gpu" debugfs file and the drm device struct_mutex is contended, release() could return early and fail to free related resources. Note that the return value from release() is ignored. Fixes: 4f776f45 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
-
Dave Airlie authored
We have the i915 security fixes to backmerge, but first let's clear the decks for other drivers to avoid a bigger mess. Signed-off-by: -
Gwan-gyeong Mun authored
The setting of MSA is done by the DDI .pre_enable() hook. And when we are using MST, the MSA is only set to first mst stream by calling of DDI .pre_eanble() hook. It raies issues to non-first mst streams. Wrong MSA or missed MSA packets might show scrambled screen or wrong screen. This splits a setting of MSA to MST and SST cases. And In the MST case it will call a setting of MSA after an allocating of Virtual Channel from MST encoder pre_enable callback. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212 Fixes: 0c06fa15 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA") Fixes: d4a415dc ("drm/i915: Fix MST oops due to MSA changes") Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.comReviewed-by:
-
Chris Wilson authored
The gem_ctx_persistence/smoketest was detecting an odd coherency issue inside the LRC context image; that the address of the ring buffer did not match our associated struct intel_ring. As we set the address into the context image when we pin the ring buffer into place before the context is active, that leaves the question of where did it get overwritten. Either the HW context save occurred after our pin which would imply that our idle barriers are broken, or we overwrote the context image ourselves. It is only in reset_active() where we dabble inside the context image outside of a serialised path from schedule-out; but we could equally perform the operation inside schedule-in which is then fully serialised with the context pin -- and remains serialised by the engine pulse with kill_context(). (The only downside, aside from doing more work inside the engine->active.lock, was the plan to merge all the reset paths into doing their context scrubbing on schedule-out needs more thought.) Fixes: d12acee8 ("drm/i915/execlists: Cancel banned contexts on schedule-out") Testcase: igt/gem_ctx_persistence/smoketest Signed-off-by:
-
- 12 Nov, 2019 2 commits
-
-
Chris Wilson authored
set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7d ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693b ("ext4: warn when page is dirtied without buffers") Signed-off-by:
-
Chris Wilson authored
We report "frequencies" (actual-frequency, requested-frequency) as the number of accumulated cycles so that the average frequency over that period may be determined by the user. This means the units we report to the user are Mcycles (or just M), not MHz. Signed-off-by:
-
