- 16 Dec, 2009 40 commits
-
-
Chaithrika U S authored
Implement frame buffer blank operation feature for DA8xx/OMAP-L1xx driver. Signed-off-by:
Chaithrika U S <chaithrika@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chaithrika U S authored
Suspend/resume support DA8xx/OMAP-L1xx frame buffer driver. This feature has been tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patch series[1] which adds suspend support for DA850/OMAP-L138 SoC was applied. [1] http://patchwork.kernel.org/patch/60260/Signed-off-by:
-
Chaithrika U S authored
Add a helper function to enable raster. Also add one member in the private data structure to track the current blank status, another function pointer which takes in the platform specific callback function to control panel power. These updates will help in adding suspend/resume and frame buffer blank operation features. Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Dan Carpenter authored
Fixed a typo: missing *. This would lead to a kernel oops if the kernel was compiled without support for the /proc file system. Found with a static checker. Compile tested. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by:
-
Vincent Sanders authored
This patch provides the acceleration entry points for the SM501 framebuffer driver. This patch provides the sync, copyarea and fillrect entry points, using the SM501's 2D acceleration engine to perform the operations in-chip rather than across the bus. Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Signed-off-by:
Simtec Linux Team <linux@simtec.co.uk> Signed-off-by:
Vincent Sanders <vince@simtec.co.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ben Dooks authored
Fix the old style use of <asm/io.h> by replacing it with <linux/io.h>. Signed-off-by:
-
Ben Dooks authored
There are several places in the SM501 fb driver that could do with using resource_size() to calculate the size of a resource. Also fix a bug where request_mem_region() is being passed one too few bytes when requesting the register memory region, which was causing the following in /proc/iomem: 13e80000-13e8ffff : sm501-fb.0 13e80000-13e8fffe : sm501-fb fixed, this reads: 13e80000-13e8ffff : sm501-fb.0 13e80000-13e8ffff : sm501-fb Signed-off-by:
-
Krzysztof Helt authored
Alan Cox has found that the i810fb function "uses a whopping 2.5K of stack". Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Reported-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Andres Salomon authored
The GRUB folks requested copyright/license info for lxfb.h, so here it is. Signed-off-by:
Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Signed-off-by:
-
Chaithrika U S authored
Add cpufreq support for DA8xx/OMAP-L1xx frame buffer driver Signed-off-by:
-
Chaithrika U S authored
The clock divider value can be calculated from the pixel clock value for the panel. This gives more flexiblity to the driver to change the divider value on the fly as in the case of cpufreq feature- support for which will be added shortly. Signed-off-by:
-
Valentin Sitdikov authored
[akpm@linux-foundation.org: clean up comments, remove do-nothing tests, use min()] [akpm@linux-foundation.org: fix Alexandr's email address] [akpm@linux-foundation.org: export mb862xxfb_init_accel] Signed-off-by:
Valentin Sitdikov <valentin.sitdikov@siemens.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by:
Alexander Shishkin <virtuoso@slind.org> Signed-off-by:
-
Julia Lawall authored
If the NULL test on fbi is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Krzysztof Helt authored
Add check if palette register number is in correct range for few drivers which miss it. The regno value comes indirectly from user space. Two drivers has converted check from BUG_ON() macro to just return an error (non-zero value). Signed-off-by:
-
Andy Shevchenko authored
Kernel has simple_strtol() implementation which could be used as atoi(). Signed-off-by:
Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Roel Kluin authored
The TV_PALN bit was tested twice, replace one by TV_PALM. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Michael Hennerich authored
The height/width framebuffer members need to be set in millimeters so that software can do proper scaling. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Michael Hennerich authored
The LCD commands DMA/timers as well as PPI which we need to save/restore. Signed-off-by:
-
Michael Hennerich authored
Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT) http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extenderSigned-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Jani Nikula authored
Drivers may use gpiolib sysfs as part of their public user space interface. The GPIO number and polarity might change from board to board. The gpio_export_link() call can be used to hide the GPIO number from user space. Add support for also hiding the GPIO line polarity changes from user space. Signed-off-by:
Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Richard Röjfors authored
A GPIO driver for the Timberdale FPGA found on the Intel Atom board Russellville. The GPIO driver also has an IRQ-chip to support interrupts on the pins. Signed-off-by:
Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Roel Kluin authored
The wrong test was used, gpio is unsigned and it had an off-by-one. Signed-off-by:
-
Wan ZongShun authored
Signed-off-by:
Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Hu Ruihuan <specter118@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "jack wang" <jack_wang@usish.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Johannes Weiner authored
All callsites of x1205_set_datetime() want the date to be set as well, so remove the flag parameter and set it unconditionally. Signed-off-by:
Johannes Weiner <jw@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
It's possible to have RTC irq shared with other device (e.g. mpc8349e-mitx board shares ds1339 irq with phy one). Handle this in driver. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Linus Walleij authored
This switches __raw_[read|write]l() for plain [read|write]l in the PL031 RTC driver. The sister driver for PL030 use the simple accessors as most PrimeCell drivers. Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
-
Piotr Ziecik authored
This patch adds basic support for Texas Instruments BQ32000 I2C RTC. Only time reading/writing is implemented. Advanced features, such as trickle charger and crystal calibration are not supported. Signed-off-by:
Piotr Ziecik <kosmo@semihalf.com> Signed-off-by:
-
Mark A. Greer authored
The rtc-omap driver currently assumes that the rtc's registers are at a fixed address and already mapped into virtual memory space. Remove those assumptions so the same driver can be used for similar devices that reside at different physical addresses (e.g., TI's DA8xx/OMAP-L13x SoC's). Also allow the possibility for the timer and alarm interrupts to use the same IRQ. Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Kevin Hilman <khilman@deeprootsystems.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Uwe Kleine-König authored
This driver provides support for the RTC part integrated into the Freescale MC13783 PMIC and bases on patch created earlier by Sascha Hauer. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by:
-
Mark Brown authored
Convert WM8350 RTC driver to dev_pm_ops Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Saeed Bishara authored
This patch adds the Alarm support, this mode enabled when adding IORESOURCE_IRQ to the platform device resources. The patch also enables the wakeup mode, so the wakealarm sysfs file (under /sys/class/rtc/rtcX/) can be used to configure the alarm clock. Signed-off-by:
Saeed Bishara <saeed@marvell.com> Signed-off-by:
Nicolas Pitre <nico@marvell.com> Signed-off-by:
-
Werner Almesberger authored
Add setting and clearing of the "pending" flag of the RTC alarm. The semantics follow the UEFI specification 2.2 available at http://www.uefi.org/specs/, i.e., the "pending" flag is cleared by disabling the alarm, but not by any other condition (such as the passing of time, a successful wakeup, or setting of a new alarm.) Signed-off-by:
Werner Almesberger <werner@openmoko.org> Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Balaji Rao <balajirrao@openmoko.org> Signed-off-by:
-
John Kacur authored
Now that we've removed the BKL here, let's explicitly set llseek to no_llseek since the default llseek is not used here. The default_llseek function still contains the BKL. When we are auditing code to see if we can remove the BKL, this is one of the hidden considerations we need to take into account. i.e., is there syncronization between code that has the BKL and llseek. At the same time we remove the BKL it would be a good idea to do indicate when no llseek function is required, so we don't have to revisit this code again, when we are trying to determine if we can remove the BKL from the default_llseek. Signed-off-by:
John Kacur <jkacur@redhat.com> Signed-off-by:
-
Atsushi Nemoto authored
The to_platform_device macro itself uses container_of macro. Nested use of container_of macro causes following sparse warnings: rtc-ds1553.c:259:3: warning: symbol '__mptr' shadows an earlier one rtc-ds1553.c:259:3: originally declared here Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Sharp <andy.sharp@lsi.com> Cc: Thomas Hommel <thomas.hommel@gefanuc.com> Signed-off-by:
-
Atsushi Nemoto authored
- Call dev_set_drvdata before rtc device creation. - Use its own spinlock instead of rtc->irq_lock. Because pdata->rtc must be initialized to use the irq_lock (pdata->rtc->irq_lock). There is a small window which rtc methods can be called before pdata->rtc is initialized. And there is no need use the irq_lock to protect hardware registers. The driver's own spinlock shoule be enough. - Check pdata->rtc before calling rtc_update_irq. - Use alarm_irq_enable and remove ioctl routine. - Use devres APIs and simplify error/remove path. These fixes are ported from ds1553 driver and just compile-tested only. Signed-off-by:
-
Atsushi Nemoto authored
* Call dev_set_drvdata before rtc device creation * Use devres APIs and simplify error/remove path Signed-off-by:
-
Atsushi Nemoto authored
* Call dev_set_drvdata before rtc device creation * Use its own spinlock instead of rtc->irq_lock * Check pdata->rtc before calling rtc_update_irq * Use {alarm,update}_irq_enable and remove ioctl routine * Use devres APIs and simplify error/remove path Signed-off-by: -
Atsushi Nemoto authored
* Use its own spinlock instead of rtc->irq_lock * Check pdata->rtc before calling rtc_update_irq * Disable interrupt after rtc_device_unregister Signed-off-by:
-
