- 20 Jun, 2023 23 commits
-
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.comSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Cristian Birsan authored
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'mvebu-dt64-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.5 (part 1) Few improvements following the dt bindings: - add missing cache properties - fix nand_controller node name according to YAML - fix pca954x i2c-mux node names Fix espressobin-ultra boot failure and wifi for EspressoBIN Ultra (Armada 3720) * tag 'mvebu-dt64-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Fix espressobin-ultra boot failure and wifi arm64: dts: marvell: Fix pca954x i2c-mux node names arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML arm64: dts: marvell: add missing cache properties Link: https://lore.kernel.org/r/877cs3h87m.fsf@BL-laptopSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptopSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt MT6795: - add GCE, MMSYS, IOMMU and PMIC wrapper nodes - Enable PMIC combo, eMMC and SDIO support to the Sony Xperia M5 MT7622: - add SPI-NAND chip and interrupt support for switch node to the BPI-R64 MT7986: - add PWM, thermal, efuse, auxadc and thermal zone nodes - BPI-R3 enable WiFi leds and enable PWM - BPI-R3 reserve more space on NOR and NOR flash to be able to store bl2 uncompressed - BPI-R3 add PWM fan for cpu cooling MT8173: - fine tune the regulator of the eDP pannel - use EDID for eDP panel instead of hard coded type MT8183: - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - provide fimrware name to SCP MT8186: - add USB, SPMI, ADSP, Global Command Engine (GCE) nodes - add nodes to enable display support - add cache coherent interconnect - add dynamic voltage scaling for CPU and GPU MT8192: - enable Bluetooth on the Hayato board - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - add cpufreq node and video decoder - add dma-ranges needed by the IOMMU rework - Fine tune capacity-dmips-mhz MT8195: - add thermal zones and video decoder - enable PCI ports on cherry (e.g. Acer Chromebook Spin 513 CP513-2H) to enable WiFi and Bluetooth combo. - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work MT8365: - add watchdog, PMIC, MMC, USB OTG, ethernet nodes - add Operation Performance Points - PSCI node and CPU idle support Several SoCs: - advertise L2 and L3 cache as unified - add chasss-type * tag 'v6.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (51 commits) arm64: dts: mt7986: increase bl2 partition on NAND of Bananapi R3 arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts arm64: dts: mt7986: add thermal-zones arm64: dts: mt7986: add thermal and efuse arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz arm64: dts: mediatek: mt8192: Add missing dma-ranges to soc node arm64: dts: mediatek: mt8183: kukui: Add scp firmware-name arm64: dts: mt8195: Add video decoder node arm64: dts: mt8192: Add video-codec nodes arm64: dts: mediatek: Add cpufreq nodes for MT8192 arm64: dts: mediatek: mt8173-elm: remove panel model number in DT arm64: dts: mt7986: use size of reserved partition for bl2 arm64: dts: mt8173: Power on panel regulator on boot arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3 arm64: dts: mt7986: add PWM to BPI-R3 arm64: dts: mt7986: add PWM ... Link: https://lore.kernel.org/r/27843c96-142e-930e-33b2-b634182e7cfa@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt Keystone2 device tree updates for v6.5 Cosmetic cleanups: * Do not capitalize hex digits * Unify pinctrl-single pin group nodes for keystone * Fix eeprom node names * tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: ARM: dts: keystone: Do not capitalize hex digits ARM: dts: keystone: Remove ti,keystone from soc node compatible ARM: dts: keystone: Fix EEPROM node names ARM: dts: Unify pinctrl-single pin group nodes for keystone Link: https://lore.kernel.org/r/20230615164127.qcgwrbwpmclx5wlm@landscapeSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM32 DeviceTree updates for v6.5 On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. * tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm: dts: qcom: sdx55: Add interconnect path ARM: dts: qcom: msm8226: Add thermal zones node ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells ARM: dts: qcom: msm8226: Add qfprom node ARM: dts: qcom: pm8941: Add thermal zone config ARM: dts: qcom: pm8841: Add thermal zone config ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config ARM: dts: qcom: msm8974: rename labels for DSI nodes ARM: dts: qcom: apq8074-dragonboard: add gpio keys ARM: dts: qcom: apq8074-dragonboard: add onboard leds ARM: dts: qcom: Add Samsung Galaxy Express support ARM: dts: qcom: msm8960: Add USB node ARM: dts: qcom: adapt to LP855X bindings changes ARM: dts: qcom: msm8226: Provide clocks to mmcc node ARM: dts: qcom: msm8226: Use XO from rpmcc where possible Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt MT7530 (e.g. BPI R2): - several DT clean-ups - add port5 as CPU port * tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add port@5 as CPU port arm: dts: mt7623: enable flow control on port@6 arm: dts: mt7623: change mt7530 switch address arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi arm: dts: mt7623: add gmacs to mt7623.dtsi Link: https://lore.kernel.org/r/98e21acb-d792-6a8c-2de6-12d5af8a8111@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM64 DTS changes for v6.5 This introduces support for the Qualcomm SDX75 platform, with the IDP reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the RDP454 is introduced. On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added. For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added to the CPU cluster power-domain to flush sleep & wake votes as the cluster goes down. On IPQ5332 additional reserved-memory regions to improve post mortem debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the RDP474 is added. On IPQ8074 critical thermal trip points are defined. As with IPQ5332 additional reserved-memory regions are used to improve post mortem debugging. Thermal sensors (tsens) are added and zones defined. The crypto engine is added, and support for the RDP454 board is added. Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and the purpose of msm8939-pm8916 is documented. MSM8939 has regulator definitions cleaned up, following to the previous effort on MSM8916. CPU Bus Fabric scaling support is added to MSM8996 Pro. On QCM2290 CPU idle states are added. For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC support. IMEM and PIL information regions are defined for improved post mortem debugging. The Qualcomm Robotics RB2 kit gets its on-board buttons described. A few fixes are introduced for the newly merged SC8180X, in particluar the DisplayPort blocks are moved to the MMCX power domain to avoid power being reduced prematurely during boot. The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s, and resets for the soundwire controllers are added. The OUI is specified for ethernet phys on SA8540P Ride platform, to avoid reset issues. Charger description is added to the PMI8998 PMIC and enabled across OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1. On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU clock controller and IOMMU definitions. The Fairphone FP4 gains Bluetooth support. SM8150 is transitioned to use 2 interconnect-cells, and the USB interconnect path is described to ensure buses are adequately voted for. The same changes are done for SM8250, and the resolution of the static framebuffer on Sony Xperia 1 II and 5 II are corrected. The USB bus paths are also added to SM8350, SM8450 and SM8550. On SM8550 DisplayPort nodes are added, as is the PWM controller for driving the notification LED and the RTC is enabled. For the MTP and QRD boards, the soundcard and audio codecs are defined. A Tegra change, related to LP855X binding changes, was accidentally picked up and dropped again later. A number of DeviceTree fixes identified through validation was introduced as well. Additionally a few nodes got their default status changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu node). * tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits) Revert "arm64: dts: adapt to LP855X bindings changes" arm64: dts: qcom: sc8280xp: Enable GPU related nodes arm64: dts: qcom: sc8280xp: Add GPU related nodes arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators arm64: dts: qcom: msm8939: Define regulator constraints next to usage arm64: dts: qcom: msm8939-pm8916: Clarify purpose arm64: dts: qcom: msm8939: Fix regulator constraints arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6 arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages arm64: dts: qcom: msm8939: Disable lpass_codec by default arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl arm64: dts: qcom: msm8996: rename labels for HDMI nodes arm64: dts: qcom: sm8250: rename labels for DSI nodes ... Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.5 New Boards: phyBOARD-Lyra-AM625 Board support Toradex Verdin AM62 COM, carrier and dev boards New features: Across K3 SoCs: - Error Signaling Module(ESM) and Secproxy IPC modules - On board I2C EEPROM - Voltage Temp Monitoring (VTM) module - DM timers (GP Timers) J784s4: - R5 and C7x DSP remoteproc, ADC, QSPI AM69: - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al J721s2: - USB, Serdes, OSPI, PCIe AM62a: - Watchdog J721e: - HyperFlash/HyperBus AM62: - Type-C USB0 port Cleanups and non-urgent fixes Particularly large set of cleanups to get rid of dtbs_check errors and dtc warnings: - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A, J721e, J7200 that are used by bootloader - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4 - Drop bootargs and unneeded aliases across all K3 SoCs - Move aliases to board dts files from SoC dtsi files - Move to generic node name for can, rtc nodes on am65 - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update - Fix pinctrl phandle references to use <> as separator where multiple entries are present * tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits) arm64: dts: ti: Unify pin group node names for make dtbs checks arm64: dts: ti: add verdin am62 yavia arm64: dts: ti: add verdin am62 dahlia arm64: dts: ti: add verdin am62 dt-bindings: arm: ti: add toradex,verdin-am62 et al. arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am64: Add ESM support arm64: dts: ti: k3-am62: Add ESM support arm64: dts: ti: k3-j7200: Add ESM support arm64: dts: ti: k3-j721e: Add ESM support dt-bindings: misc: esm: Add ESM support for TI K3 devices arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header arm64: dts: ti: k3-j721s2: Fix wkup pinmux range ... Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.comSigned-off-by:
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
arm64: ZynqMP DT changes for v6.5 Various small fixes and cleanups to be aligned with the latest dt-schema. Other major changes are: - Wire mali-400 gpu - Change board name for zcu1275 - Use ethernet-phy-id to handle ETH phy reset properly - Switch to amd.com emails - Update people in DT bindings * tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits) dt-bindings: usb: xilinx: Replace Manish by Piyush dt-bindings: xilinx: Remove Rajan, Jolly and Manish arm64: zynqmp: Used fixed-partitions for QSPI in k26 arm64: zynqmp: Add pmu interrupt-affinity arm64: zynqmp: Set qspi tx-buswidth to 4 arm64: zynqmp: Fix usb node drive strength and slew rate arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Switch to amd.com emails arm64: zynqmp: Convert kv260-revA overlay to ASCII text dt-bindings: xilinx: Switch xilinx.com emails to amd.com arm64: xilinx: Use zynqmp prefix for SOM dt overlays arm64: zynqmp: Add phase tags marking arm64: zynqmp: Describe bus-width for SD card on KV260 arm64: zynqmp: Enable AMS on SOM and other zcu10x boards arm64: zynqmp: Enable DP driver for SOMs arm64: zynqmp: Setup clock for DP and DPDMA arm64: zynqmp: Switch to ethernet-phy-id in kv260 arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 arm64: zynqmp: Add pinctrl emmc description to SM-K26 arm64: zynqmp: Add gpio labels for modepin gpio ... Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'riscv-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.5 StarFive: Watchdog nodes for both the JH7110 & its forerunner, the JH7100. PMU, P being power, support for the JH7110. PMIC and frequency scaling support for the JH7110 equipped VisionFive 2. Most of the DT bits for the JH7110, and the SBCs using it, are pending support for one of the clock controllers, so it's a smaller set of changes than I would have hoped for. Misc: Pick up some dt-binding cleanup that Palmer assigned to me & had no uptake from the respective maintainers. My powers of estimation failed me again, with part of my motivation for picking them up being the addition of new platforms that ended up not making it. Hopefully next window for those, as they were relatively close. Exclude the Allwinner and Renesas subdirectories from the Misc. MAINTAINERS entry, since I do not take care of those. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: Add cpu scaling for JH7110 SoC riscv: dts: starfive: Enable axp15060 pmic for cpufreq dt-bindings: interrupt-controller: sifive,plic: Sort compatible values dt-bindings: timer: sifive,clint: Clean up compatible value section riscv: dts: starfive: jh7110: Add watchdog node riscv: dts: starfive: jh7100: Add watchdog node riscv: dts: starfive: Add PMU controller node MAINTAINERS: exclude maintained subdirs in RISC-V misc DT entry Link: https://lore.kernel.org/r/20230612-fasting-floss-0bc05a08bc7a@spudSigned-off-by:
-
Sam Protsenko authored
As described in the corresponding binding documentation for "samsung,exynos850-pmu", the "clocks" property should be used for specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850 pmu_system_controller is incorrect and should be removed. Instead of making syscon regmap keep that clock running for PMU accesses, it should be made always running in the clock driver, because the kernel is not the only software accessing PMU registers on Exynos850 platform. Signed-off-by:
Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.orgSigned-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230612180102.289745-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are - Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. * tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: Add saradc node to rock5b arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic arm64: dts: rockchip: Add SD card support to rock-5b arm64: dts: rockchip: add PMIC to rock-5b arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b arm64: dts: rockchip: Add Indiedroid Nova board dt-bindings: arm: rockchip: Add Indiedroid Nova dt-bindings: vendor-prefixes: add Indiedroid arm64: dts: rockchip: Add sdio node to rk3588 arm64: dts: rockchip: add default pinctrl for rk3588 emmc arm64: dts: rockchip: Add DT node for ADC support in RK3588 arm64: dts: rockchip: add PMIC to rk3588-evb1 arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM arm64: dts: rockchip: Add Rockchip RK3588J dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B arm64: dts: rockchip: Add RGA2 support to rk356x media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga arm64: dts: rockchip: Add rk3588 OTP node arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus ... Link: https://lore.kernel.org/r/3239799.44csPzL39Z@philSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.5 NAND support on IPQ4019 boards is restored, after a faulty node rename. On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch gains vibrator support. On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074 Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and modem DSPs are enabled. On SDX65 PCIe controller and PHY are introduced, to provide endpoint functionality. This is enabled on the related MTP. A range of DeviceTree cleanups are also included. * tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) ARM: dts: qcom: apq8074-dragonboard: enable DSI panel ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator ARM: dts: qcom: msm8226: Add IMEM node ARM: dts: qcom: msm8226: Add rpm-stats device node ARM: dts: qcom: msm8226: Add PMU node ARM: dts: qcom: sdx65-mtp: Enable PCIe EP ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY ARM: dts: qcom: sdx65: Add support for PCIe EP ARM: dts: qcom: sdx65: Add support for PCIe PHY ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings ARM: dts: qcom: apq8084: correct thermal sensor unit-address ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus ARM: dts: qcom: ipq8064: align USB node names with bindings ARM: dts: qcom: ipq8064: correct LED node names ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address ARM: dts: qcom: ipq8064: drop leading 0 from unit-address ARM: dts: qcom: msm8974: correct pronto unit-address ... Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.5 This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. * tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ... Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree for 6.5: - New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB board, i.MX8MP based Gateworks Venice gw7905-2x device. - A series from Adam Ford to add Camera and Audio support for i.MX8M based Beacon boards. - Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board. - Add HDMI and display support for imx8mm-evk and imx8mm-phg board. - Add coresight trace devices support for i.MX8MP SoC. - A couple of changes from Krzysztof Kozlowski to add missing cache properties. - A couple of changes from Laurent Pinchart to add CSIS and ISI devices for i.MX8MP SoC. - A series from Marek Vasut to add more devices for i.MX8MP, and enable SAI audio on i.MX8MP DHCOM PDK2 and PDK3. - Correct GSC vdd_bat data size for Gateworks Venice devices. - Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR performance monitor, etc. - Small and random clean-ups and device node additions. * tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits) arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi arm64: dts: imx8mq: Use 'dsi' as node name arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties arm64: dts: imx8mq: Add missing pci property arm64: dts: imx8mq: Fix lcdif clocks arm64: dts: imx8mq: Fix lcdif compatible arm64: dts: imx8mp: don't initialize audio clocks from CCM node arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size. arm64: dts: imx8mp: Add coresight trace components arm64: dts: imx93: add ddr performance monitor node arm64: dts: imx8mm-phg: Add display support arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms arm64: dts: imx8mm-evk: Add HDMI support arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable arm64: dts: imx8mp-msc-sm2s: Add sound card arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC arm64: dts: imx93: add fsl,stop-mode property to support WOL ... Link: https://lore.kernel.org/r/20230610072530.418847-3-shawnguo@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxArnd Bergmann authored
i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings for 6.5: - Add vendor prefix for Emtop - Compatibles for Marantec Maveo Box, i.MX8MM-EVKB and GW7905-2x board. - Replace tab indent with spaces in fsl.yaml. * tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: Add Gateworks i.MX8M GW7905-2x board dt-bindings: arm: fsl: Fix syntax error dt-bindings: vendor-prefixes: Add Emtop dt-bindings: arm: fsl: Add Emtop SoM & Baseboard dt-bindings: arm: fsl: Add i.MX8MM-EVKB dt-bindings: arm: fsl: Add Marantec maveo box as a DHCOR i.MX6ULL SoM based board Link: https://lore.kernel.org/r/20230610072530.418847-1-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptopSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.5-rc1 This introduces support for the IGX Orin and Jetson Orin Nano devices and enables various additional features on the Jetson AGX Orin and Jetson Orin NX. This also enables some basic thermal support to prevent the devices from overheating. Support for the GPU on the Google Pixel C is enabled and various minor issues are fixed and cleaned up. * tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable thermal support on Jetson Orin Nano arm64: tegra: Enable thermal support on Jetson Orin NX arm64: tegra: Enable thermal support on Jetson AGX Orin arm64: tegra: Add Tegra234 thermal support arm64: tegra: Add a few blank lines for better readability arm64: tegra: Sort properties more logically arm64: tegra: Enable GPU on Smaug arm64: tegra: Add GPU power rail regulator on Smaug arm64: tegra: Update USB phy-name for Jetson Orin NX arm64: tegra: Enable USB device for Jetson AGX Orin arm64: tegra: Add Tegra234 pin controllers arm64: tegra: Support Jetson Orin Nano Developer Kit arm64: tegra: Add missing cache properties on Tegra210 arm64: tegra: Fix PCIe regulator for Orin Jetson AGX arm64: tegra: Add CPU OPP tables and interconnects property arm64: tegra: Add support for IGX Orin Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.5-rc1 Several new modules and devices are documented and fixes incorporated for the Tegra234 GPIO controller pin mappings as well as the possible Tegra XUDC PHY connections. * tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: tegra: Document Jetson Orin Nano Developer Kit dt-bindings: tegra: Document Jetson Orin Nano dt-bindings: gpio: Remove FSI domain ports on Tegra234 dt-bindings: usb: tegra-xudc: Remove extraneous PHYs dt-bindings: tegra: Add ICC IDs for dummy memory clients dt-bindings: tegra: Document compatible for IGX Link: https://lore.kernel.org/r/20230609193620.2275240-3-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.comSigned-off-by:
-
- 19 Jun, 2023 2 commits
-
-
Rafał Miłecki authored
This fixes: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet. Signed-off-by:Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.comSigned-off-by:
Florian Fainelli <florian.fainelli@broadcom.com>
-
Stanislav Jakubek authored
Convert Broadcom Kona family Secure Monitor bounce buffer bindings to DT schema. Changes during conversion: - move from misc to firmware subdirectory - add used, but previously undocumented SoC-specific compatibles - drop deprecated compatibles (they've been deprecated for ~10 years) Reviewed-by:
Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/20230618151308.GA23586@standask-GA-A55M-S2HPSigned-off-by:
-
- 16 Jun, 2023 4 commits
-
-
Ben Schneider authored
Boot hangs on EspressoBIN Ultra (Armada 3720) after a message that device vcc_sd1 had been disabled. The device manufacturer patched this issue in their kernel fork noting that vcc_sd1 is used by the EspressoBIN model but not the EspressoBIN Ultra. Removing the device from the tree fixes the boot hang and wifi. Signed-off-by:
Ben Schneider <ben@bens.haus> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com>
-
Geert Uytterhoeven authored
"make dtbs_check": arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by:
-
Chris Packham authored
Update the node names for the SPI NOR and NAND partitions to conform to the partition properties in the relevant dtschema. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Vadym Kochan authored
Marvell NAND controller has now YAML to validate it's DT bindings, so change the node name of cp11x DTSI as it is required by nand-controller.yaml Signed-off-by:
Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by:
-
- 15 Jun, 2023 11 commits
-
-
Bjorn Andersson authored
commit 'ebdcfc8c ("arm64: dts: adapt to LP855X bindings changes")' is a Tegra change, but was accidentally merged in the Qualcomm tree. The change is reverted to avoid rebasing a large number of other changes. This reverts commit ebdcfc8c. Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com>
-
Tony Lindgren authored
Prepare for pinctrl-single yaml binding and unify pin group node names. Let's standardize on pin group node naming ending in -pins. As we don't necessarily have a SoC specific compatible property for pinctrl-single. I'd rather not add a pattern match for pins somewhere in the name for all the users. Trying to add matches for pins-default will be futile as on the earlier SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so on that would need to be matched. And as the node is a pin group, let's prefer to use naming -pins rather than -pin as more pins may need to be added to the pin group later on. Signed-off-by:
Tony Lindgren <tony@atomide.com> [vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes] Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com>
-
Francesco Dolcini authored
Add Toradex Verdin AM62 Yavia. Link: https://www.toradex.com/products/carrier-board/yaviaSigned-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-6-francesco@dolcini.itSigned-off-by:
-
Francesco Dolcini authored
Add Toradex Verdin AM62 Dahlia. Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kitSigned-off-by:
-
Francesco Dolcini authored
This patch adds the device tree to support Toradex Verdin AM62 a computer on module which can be used on different carrier boards and the Toradex Verdin Development Board carrier board. The module consists of an TI AM62 family SoC (either AM623 or AM625), a TPS65219 PMIC, a Gigabit Ethernet PHY, 512MB to 2GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, and optional Parallel RGB to MIPI DSI bridge plus an optional Bluetooth/Wi-Fi module. Anything that is not self-contained on the module is disabled by default. So far there is no display nor USB role switch supported, apart of that all the other functionalities are fine. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kitSigned-off-by:
-
Francesco Dolcini authored
Add toradex,verdin-am62 for Toradex Verdin AM62 SoM, its nonwifi and wifi variants and the carrier boards (Dahlia, Verdin Development Board and Yavia) they may be mated in. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62Signed-off-by:
-
Wadim Egorov authored
The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family. A development Kit, called phyBOARD-Lyra [2] is used as a carrier board reference design around the AM62x SoM. Supported features: * Debug UART * SPI NOR Flash * eMMC * 2x Ethernet * Micro SD card * I2C EEPROM * I2C RTC * GPIO Expander * LEDs * USB For more details, see: [1] Product page SoM: https://www.phytec.com/product/phycore-am62x [2] Product page CB: https://www.phytec.com/product/phyboard-am62xSigned-off-by:
Wadim Egorov <w.egorov@phytec.de> Reviewed-by:
-
Daniel Golle authored
The bootrom burned into the MT7986 SoC will try multiple locations on the SPI-NAND flash to load bl2 in case the bl2 image located at the the previously attempted offset is corrupt. Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND, allowing for up to four redundant copies of bl2 (typically sized a bit less than 0x40000). Fixes: 8e01fb15 ("arm64: dts: mt7986: add Bananapi R3") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.orgSigned-off-by:
Matthias Brugger <matthias.bgg@gmail.com>
-
Chen-Yu Tsai authored
Add the GPU's OPP table. This is from the downstream ChromeOS kernel, adapted to the new upstream opp-supported-hw binning format. Also add dynamic-power-coefficient for the GPU. Also add label for mfg1 power domain. This is to be used at the board level to add a regulator supply for the power domain. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230609072906.2784594-5-wenst@chromium.orgSigned-off-by:
-
Chen-Yu Tsai authored
On the MT8186, the chip is binned for different GPU voltages at the highest OPPs. The binning value is stored in the efuse. Add the NVMEM cell, and tie it to the GPU. Signed-off-by:
-
Chen-Yu Tsai authored
This adds clocks, dynamic power coefficients, and OPP tables for the CPU cores, so that everything required at the SoC level for CPU freqency and voltage scaling is available. Signed-off-by:
-
