- 31 May, 2022 37 commits
-
-
Solomon Tan authored
This patch addresses the checkpatch.pl warning where unsigned int is preferred over unsigned. Signed-off-by:
Solomon Tan <solomonbstoner@protonmail.ch> Message-Id: <YlzS49Wo8JMDhKOt@ArchDesktop> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
lei he authored
Enable retry for virtio-crypto-dev, so that crypto-engine can process cipher-requests parallelly. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Reviewed-by:
Gonglei <arei.gonglei@huawei.com> Signed-off-by:
lei he <helei.sig11@bytedance.com> Signed-off-by:
zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220506131627.180784-6-pizhenwei@bytedance.com> Signed-off-by:
-
lei he authored
For some akcipher operations(eg, decryption of pkcs1pad(rsa)), the length of returned result maybe less than akcipher_req->dst_len, we need to recalculate the actual dst_len through the virt-queue protocol. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Reviewed-by:
-
zhenwei pi authored
Originally, after submitting request into virtio crypto control queue, the guest side polls the result from the virt queue. This works like following: CPU0 CPU1 ... CPUx CPUy | | | | \ \ / / \--------spin_lock(&vcrypto->ctrl_lock)-------/ | virtqueue add & kick | busy poll virtqueue | spin_unlock(&vcrypto->ctrl_lock) ... There are two problems: 1, The queue depth is always 1, the performance of a virtio crypto device gets limited. Multi user processes share a single control queue, and hit spin lock race from control queue. Test on Intel Platinum 8260, a single worker gets ~35K/s create/close session operations, and 8 workers get ~40K/s operations with 800% CPU utilization. 2, The control request is supposed to get handled immediately, but in the current implementation of QEMU(v6.2), the vCPU thread kicks another thread to do this work, the latency also gets unstable. Tracking latency of virtio_crypto_alg_akcipher_close_session in 5s: usecs : count distribution 0 -> 1 : 0 | | 2 -> 3 : 7 | | 4 -> 7 : 72 | | 8 -> 15 : 186485 |************************| 16 -> 31 : 687 | | 32 -> 63 : 5 | | 64 -> 127 : 3 | | 128 -> 255 : 1 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 0 | | 4096 -> 8191 : 0 | | 8192 -> 16383 : 2 | | This means that a CPU may hold vcrypto->ctrl_lock as long as 8192~16383us. To improve the performance of control queue, a request on control queue waits completion instead of busy polling to reduce lock racing, and gets completed by control queue callback. CPU0 CPU1 ... CPUx CPUy | | | | \ \ / / \--------spin_lock(&vcrypto->ctrl_lock)-------/ | virtqueue add & kick | ---------spin_unlock(&vcrypto->ctrl_lock)------ / / \ \ | | | | wait wait wait wait Test this patch, the guest side get ~200K/s operations with 300% CPU utilization. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Reviewed-by: -
zhenwei pi authored
Originally, all of the control requests share a single buffer( ctrl & input & ctrl_status fields in struct virtio_crypto), this allows queue depth 1 only, the performance of control queue gets limited by this design. In this patch, each request allocates request buffer dynamically, and free buffer after request, so the scope protected by ctrl_lock also get optimized here. It's possible to optimize control queue depth in the next step. A necessary comment is already in code, still describe it again: /* * Note: there are padding fields in request, clear them to zero before * sending to host to avoid to divulge any information. * Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48] */ So use kzalloc to allocate buffer of struct virtio_crypto_ctrl_request. Potentially dereferencing uninitialized variables: Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Reviewed-by:
-
zhenwei pi authored
Use temporary variable to make code easy to read and maintain. /* Pad cipher's parameters */ vcrypto->ctrl.u.sym_create_session.op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = vcrypto->ctrl.header.algo; vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = cpu_to_le32(keylen); vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = cpu_to_le32(op); --> sym_create_session = &ctrl->u.sym_create_session; sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); sym_create_session->u.cipher.para.algo = ctrl->header.algo; sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen); sym_create_session->u.cipher.para.op = cpu_to_le32(op); The new style shows more obviously: - the variable we want to operate. - an assignment statement in a single line. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Reviewed-by: -
Murilo Opsfelder Araujo authored
GCC 12 enhanced -Waddress when comparing array address to null [0], which warns: drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’: drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress] 257 | if (vp_dev->msix_affinity_masks[i]) | ^~~~~~ In fact, the verification is comparing the result of a pointer arithmetic, the address "msix_affinity_masks + i", which will always evaluate to true. Under the hood, free_cpumask_var() calls kfree(), which is safe to pass NULL, not requiring non-null verification. So remove the verification to make compiler happy (happy compiler, happy life). [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103Signed-off-by:Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com> Signed-off-by:
Christophe de Dinechin <dinechin@redhat.com>
-
Christophe JAILLET authored
If an error occurs after a successful pci_request_selected_regions() call, it should be undone by a corresponding pci_release_selected_regions() call, as already done in vp_modern_remove(). Fixes: fd502729 ("virtio-pci: introduce modern device module") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <237109725aad2c3c03d14549f777b1927c84b045.1648977064.git.christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Gautam Dawar authored
This patch introduces the control virtqueue support for vDPA simulator. This is a requirement for supporting advanced features like multiqueue. A requirement for control virtqueue is to isolate its memory access from the rx/tx virtqueues. This is because when using vDPA device for VM, the control virqueue is not directly assigned to VM. Userspace (Qemu) will present a shadow control virtqueue to control for recording the device states. The isolation is done via the virtqueue groups and ASID support in vDPA through vhost-vdpa. The simulator is extended to have: 1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue) 2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1 contains CVQ 3) two address spaces and the simulator simply implements the address spaces by mapping it 1:1 to IOTLB. For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1 to group 1. So we have: 1) The IOTLB for virtqueue group 0 contains the mappings of guest, so RX and TX can be assigned to guest directly. 2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which is the buffers that allocated and managed by VMM only. So CVQ of vhost-vdpa is visible to VMM only. And Guest can not access the CVQ of vhost-vdpa. For the other use cases, since AS 0 is associated to all virtqueue groups by default. All virtqueues share the same mapping by default. To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is implemented in the simulator for the driver to set mac address. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-20-gdawar@xilinx.com> Signed-off-by:
-
Gautam Dawar authored
This patch implements a simple unicast filter for vDPA simulator. Signed-off-by:
-
Gautam Dawar authored
Wrap up common buffer completion logic in to vdpasim_net_complete Signed-off-by:
-
Gautam Dawar authored
We've already reported maximum mtu via config space, so let's advertise the feature. Signed-off-by:
-
Gautam Dawar authored
This patch extends the vhost-vdpa to support ASID based IOTLB API. The vhost-vdpa device will allocated multiple IOTLBs for vDPA device that supports multiple address spaces. The IOTLBs and vDPA device memory mappings is determined and maintained through ASID. Note that we still don't support vDPA device with more than one address spaces that depends on platform IOMMU. This work will be done by moving the IOMMU logic from vhost-vDPA to vDPA device driver. Signed-off-by:
-
Gautam Dawar authored
Follows the vDPA support for associating ASID to a specific virtqueue group. This patch adds a uAPI to support setting them from userspace. Signed-off-by:
-
Gautam Dawar authored
Follows the support for virtqueue group in vDPA. This patches introduces uAPI to get the virtqueue group ID for a specific virtqueue in vhost-vdpa. Signed-off-by:
-
Gautam Dawar authored
This patch introduces the uAPI for getting the number of address spaces supported by this vDPA device. Signed-off-by:
-
Gautam Dawar authored
Follows the vDPA support for multiple address spaces, this patch introduce uAPI for the userspace to know the number of virtqueue groups supported by the vDPA device. Signed-off-by:
-
Gautam Dawar authored
This patch converts the vhost-vDPA device to support multiple IOTLBs tagged via ASID via hlist. This will be used for supporting multiple address spaces in the following patches. Signed-off-by:
-
Gautam Dawar authored
This patches allows userspace to send ASID based IOTLB message to vhost. This idea is to use the reserved u32 field in the existing V2 IOTLB message. Vhost device should advertise this capability via VHOST_BACKEND_F_IOTLB_ASID backend feature. Signed-off-by:
-
Gautam Dawar authored
This patch splits out IOTLB initialization to make sure it could be reused by external modules. Signed-off-by:
-
Gautam Dawar authored
This patch introduces a new bus operation to allow the vDPA bus driver to associate an ASID to a virtqueue group. Signed-off-by:
-
Gautam Dawar authored
This patches introduces the multiple address spaces support for vDPA device. This idea is to identify a specific address space via an dedicated identifier - ASID. During vDPA device allocation, vDPA device driver needs to report the number of address spaces supported by the device then the DMA mapping ops of the vDPA device needs to be extended to support ASID. This helps to isolate the environments for the virtqueue that will not be assigned directly. E.g in the case of virtio-net, the control virtqueue will not be assigned directly to guest. As a start, simply claim 1 virtqueue groups and 1 address spaces for all vDPA devices. And vhost-vDPA will simply reject the device with more than 1 virtqueue groups or address spaces. Signed-off-by:
-
Gautam Dawar authored
This patch introduces virtqueue groups to vDPA device. The virtqueue group is the minimal set of virtqueues that must share an address space. And the address space identifier could only be attached to a specific virtqueue group. Signed-off-by:
-
Gautam Dawar authored
To ease the implementation of per group ASID support for vDPA device. This patch switches to use a vhost-vdpa specific IOTLB to avoid the unnecessary refactoring of the vhost core. Signed-off-by:
-
Gautam Dawar authored
To prepare for the ASID support for vhost-vdpa, try to pass IOTLB object to dma helpers. No functional changes, it's just a preparation for support multiple IOTLBs. Signed-off-by:
-
Gautam Dawar authored
There's no need for setting callbacks for the driver that doesn't care about that. Signed-off-by:
-
Gautam Dawar authored
We should store feature bits in vhost_types.h as what has been done for e.g VHOST_F_LOG_ALL. Signed-off-by:
-
Xianting Tian authored
The 'if (vq->vq.num_free < descs_used)' check will almost always be false. Signed-off-by:
Xianting Tian <xianting.tian@linux.alibaba.com> Message-Id: <20220328105817.1028065-2-xianting.tian@linux.alibaba.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com>
-
Xianting Tian authored
It passes '_vq' to virtqueue_use_indirect(), which still calls to_vvq to get 'vq', let's directly pass 'vq'. It can avoid unnecessary call of to_vvq in hot path. Signed-off-by:
-
Suwan Kim authored
This patch supports mq_ops->queue_rqs() hook. It has an advantage of batch submission to virtio-blk driver. It also helps polling I/O because polling uses batched completion of block layer. Batch submission in queue_rqs() can boost polling performance. In queue_rqs(), it iterates plug->mq_list, collects requests that belong to same HW queue until it encounters a request from other HW queue or sees the end of the list. Then, virtio-blk adds requests into virtqueue and kicks virtqueue to submit requests. If there is an error, it inserts error request to requeue_list and passes it to ordinary block layer path. For verification, I did fio test. (io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N) I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times. It shows about 2% improvement. | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without queue_rqs() | 291K IOPS | 238K IOPS ----------------------------------------------------------- fio with queue_rqs() | 295K IOPS | 243K IOPS For polling I/O performance, I also did fio test as below. (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4) I set 4 vcpu and 2 poll queues for VM. It shows about 2% improvement in polling I/O. | IOPS | avg latency ----------------------------------------------------------- fio poll without queue_rqs() | 424K | 613.05 usec ----------------------------------------------------------- fio poll with queue_rqs() | 435K | 601.01 usec Reviewed-by:Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Suwan Kim <suwan.kim027@gmail.com> Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com> Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com>
-
Suwan Kim authored
This patch supports polling I/O via virtio-blk driver. Polling feature is enabled by module parameter "poll_queues" and it sets dedicated polling queues for virtio-blk. This patch improves the polling I/O throughput and latency. The virtio-blk driver doesn't not have a poll function and a poll queue and it has been operating in interrupt driven method even if the polling function is called in the upper layer. virtio-blk polling is implemented upon 'batched completion' of block layer. virtblk_poll() queues completed request to io_comp_batch->req_list and later, virtblk_complete_batch() calls unmap function and ends the requests in batch. virtio-blk reads the number of poll queues from module parameter "poll_queues". If VM sets queue parameter as below, ("num-queues=N" [QEMU property], "poll_queues=M" [module parameter]) It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)] as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default queues, the poll queues have no callback function. Regarding HW-SW queue mapping, the default queue mapping uses the existing method that condsiders MSI irq vector. But the poll queue doesn't have an irq, so it uses the regular blk-mq cpu mapping. For verifying the improvement, I did Fio polling I/O performance test with io_uring engine with the options below. (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N) I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll queues for VM. As a result, IOPS and average latency improved about 10%. Test result: - Fio io_uring poll without virtio-blk poll support -- numjobs=1 : IOPS = 339K, avg latency = 188.33us -- numjobs=2 : IOPS = 367K, avg latency = 347.33us -- numjobs=4 : IOPS = 383K, avg latency = 682.06us - Fio io_uring poll with virtio-blk poll support -- numjobs=1 : IOPS = 385K, avg latency = 165.94us -- numjobs=2 : IOPS = 408K, avg latency = 313.28us -- numjobs=4 : IOPS = 424K, avg latency = 613.05us Reviewed-by:Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by:
-
Eli Cohen authored
Reading statistics could be done intensively and by several processes concurrently. Reader's lock is sufficient in this case. Change reslock from mutex to a rwsem. Suggested-by:
Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by:
Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-7-elic@nvidia.com> Signed-off-by:
-
Eli Cohen authored
Implement the get_vq_stats calback of vdpa_config_ops to return the statistics for a virtqueue. The statistics are provided as vendor specific statistics where the driver provides a pair of attribute name and attribute value. Currently supported are received descriptors and completed descriptors. Signed-off-by:
-
Eli Cohen authored
Replace cf_mutex with rw_semaphore to reflect the fact that some calls could be called concurrently but can suffice with read lock. Suggested-by:
-
Eli Cohen authored
Use rw_semaphore instead of mutex to control access to vdpa devices. This can be especially beneficial in case processes poll on statistics information. Suggested-by:
-
Eli Cohen authored
Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: -
Eli Cohen authored
In vdpa_nl_cmd_dev_get_doit(), if the call to genlmsg_reply() fails we must not call nlmsg_free() since this is done inside genlmsg_reply(). Fix it. Fixes: bc0d90ee ("vdpa: Enable user to query vdpa device info") Reviewed-by:
-
- 30 May, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes and updates from Helge Deller: "A buch of small fixes and cleanups, including: - vesafb: Fix a use-after-free due early fb_info cleanup - clcdfb: Fix refcount leak in clcdfb_of_vram_setup - hyperv_fb: Allow resolutions with size > 64 MB for Gen1 - pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() - omapfb: Prevent compiler warning regarding hwa742_update_window_async()" * tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Add prototype for hwa742_update_window_async() video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup video: fbdev: radeon: Fix spelling typo in comment video: fbdev: xen: remove setting of 'transp' parameter video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() video: fbdev: omapfb: simplify the return expression of nec_8048_connect() video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data() video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1 -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture updates from Helge Deller: "Minor cleanups and code optimizations, e.g.: - improvements in assembly statements in the tmpalias code path - added some additionals compile time checks - drop some unneccesary assembler DMA syncs" * tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT parisc: Optimize tmpalias function calls parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels parisc: Fix wrong comment for shr macro parisc: Prevent ldil() to sign-extend into upper 32 bits parisc: Don't hardcode assembler bit definitions in tmpalias code parisc: Don't enforce DMA completion order in cache flushes parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These update the ARM cpufreq drivers and fix up the CPPC cpufreq driver after recent changes, update the OPP code and PM documentation and add power sequences support to the system reboot and power off code. Specifics: - Add Tegra234 cpufreq support (Sumit Gupta) - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing, Rex-BC Chen, and Jia-Wei Chang) - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin, Pierre Gondois) - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana) - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel) - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski) - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter) - Cleanups (Krzysztof Kozlowski, and Viresh Kumar) - Add Out of Band mode description to the intel-speed-select utility documentation (Srinivas Pandruvada) - Add power sequences support to the system reboot and power off code and make related platform-specific changes for multiple platforms (Dmitry Osipenko, Geert Uytterhoeven)" * tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits) cpufreq: CPPC: Fix unused-function warning cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE Documentation: admin-guide: PM: Add Out of Band mode kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() ...
-
