- 21 Dec, 2023 40 commits
-
-
Matthew Brost authored
xe_vma_op_unmap isn't used, remove it. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Matthew Brost authored
We currently have a race between bind engines which can result in corrupted page tables leading to faults. A simple example: bind A 0x0000-0x1000, engine A, has unsatisfied in-fence bind B 0x1000-0x2000, engine B, no in-fences exec A uses 0x1000-0x2000 Bind B will pass bind A and exec A will fault. This occurs as bind A programs the root of the page table in a bind job which is held up by an in-fence. Bind B in this case just programs a leaf entry of the structure. To fix use range-fence utility to track cross bind engine conflicts. In the above example bind A would insert an dependency into the range-fence tree with a key of 0x0-0x7fffffffff, bind B would find that dependency and its bind job would scheduled behind the unsatisfied in-fence and bind A's job. Reviewed-by: Maarten Lankhorst<maarten.lankhorst@linux.intel.com> Co-developed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
-
Thomas Hellström authored
Add generic utility to track range conflicts signaled by a dma-fence. Tracking implemented via an interval tree. An example use case being tracking conflicts for pending (un)binds from multiple bind engines. By being generic ths idea would this could moved to the DRM level and used in multiple drivers for similar problems. v2: Make interval tree functions static (CI) v3: Remove non-static cleanup function (CI) Reviewed-by:
-
Francois Dugast authored
Make explicit in the log that execlist submission is used to prevent from silently using it over GuC submission. Signed-off-by:
Francois Dugast <francois.dugast@intel.com> Reviewed-by:
-
Francois Dugast authored
Fix 6 errors and 20 warnings reported by checkpatch.pl. Signed-off-by:
-
Francois Dugast authored
Those look like leftover debug and are not even being used. If they were real debug/info, they should be using the drm helpers. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Francois Dugast authored
Those messages are unnecessary because a generic message is already produced in case of allocation failure. Besides, this also removes a misuse of the XE_IOCTL_DBG macro. Signed-off-by:
-
Lucas De Marchi authored
Use FIELD_PREP()/FIELD_GET() to encode the tile id into flags. Besides protecting for eventual overflow it also makes it easier to see a new flag can't be added as BIT(7). Reviewed-by:
-
Lucas De Marchi authored
Rename XE_VM_FLAGS_64K to XE_VM_FLAG_64K to follow the other names and s/GT/TILE/ that got missed in commit 08dea767 ("drm/xe: Move migration from GT to tile"). Reviewed-by:
-
Matthew Auld authored
It looks like bulk_move is set during object construction, but is only removed on object close, however in various places we might not yet have an actual fd to close, like on the error paths for the gem_create ioctl, and also one internal user for the evict_test_run_gt() selftest. Try to handle those cases by manually resetting the bulk_move. This should prevent triggering: WARNING: CPU: 7 PID: 8252 at drivers/gpu/drm/ttm/ttm_bo.c:327 ttm_bo_release+0x25e/0x2a0 [ttm] v2 (Nirmoy): - It should be safe to just unconditionally call __xe_bo_unset_bulk_move() in most places. Signed-off-by:Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Signed-off-by:
-
Matthew Auld authored
Test seems to be failing badly after calling xe_bo_restore_kernel(). Taking a snapshot of the CTB and copying back a potentially old version seems risky, depending on what might have been inflight. Also it seems snapshotting the ADS object and copying back results in serious breakage. Normally when calling xe_bo_restore_kernel() we always fully restart the GT, which re-intializes such things. We could potentially skip saving and restoring such objects in xe_bo_evict_all() however seems quite fragile not to also restart the GT. Try to do that here by triggering a GT reset. Signed-off-by:
-
Matthew Auld authored
The GPU job will keep the device awake, however assumption here is that caller of xe_migrate_clear() is also holding mem_access.ref otherwise we hit the asserts in xe_sa_bo_flush_write() prior to the job construction. Signed-off-by:
-
Matthew Auld authored
We are calling fairly low level things like xe_bo_restore_kernel() which expect caller to be holding mem_access.ref. Since we are doing stuff like evict_all we likely don't want to race with rpm suspend, since that potentially wants to do the same thing, so just wrap the whole test. Signed-off-by:
-
Matthew Auld authored
The atomics here might hide potential issues, also rpm core is not holding any lock when calling our rpm resume callback, so add a dummy lock with the idea that xe_pm_runtime_resume() is eventually going to be called when we are holding it. This only needs to happen once and then lockdep can validate all callers and their locks. v2: (Thomas Hellström) - Prefer static lockdep_map instead of full blown mutex. Signed-off-by:
-
Matthew Auld authored
Lockdep gives the following splat: [ 594.158863] ffff888140da53f0 (&vm->userptr.notifier_lock){++++}-{3:3}, at: vma_userptr_invalidate+0xeb/0x330 [xe] [ 594.158921] but task is already holding lock: [ 594.158926] ffffffff82761940 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x0/0x1c0 [ 594.158941] which lock already depends on the new lock. [ 594.158947] the existing dependency chain (in reverse order) is: [ 594.158953] -> #5 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: [ 594.158961] fs_reclaim_acquire+0x68/0xd0 [ 594.158969] __kmem_cache_alloc_node+0x2c/0x1b0 [ 594.158975] kmalloc_node_trace+0x1d/0xb0 [ 594.158983] alloc_worker+0x18/0x50 [ 594.158989] init_rescuer.part.0+0x13/0xa0 [ 594.158995] workqueue_init+0xdf/0x210 [ 594.159001] kernel_init_freeable+0x5c/0x2f0 [ 594.159009] kernel_init+0x11/0x1a0 [ 594.159017] ret_from_fork+0x29/0x50 [ 594.159023] -> #4 (fs_reclaim){+.+.}-{0:0}: [ 594.159031] fs_reclaim_acquire+0xa0/0xd0 [ 594.159037] __kmem_cache_alloc_node+0x2c/0x1b0 [ 594.159042] kmalloc_trace+0x20/0xb0 [ 594.159048] acpi_device_add+0x25a/0x3f0 [ 594.159056] acpi_add_single_object+0x387/0x750 [ 594.159063] acpi_bus_check_add+0x108/0x280 [ 594.159069] acpi_bus_scan+0x34/0xf0 [ 594.159075] acpi_scan_init+0xed/0x2b0 [ 594.159082] acpi_init+0x21e/0x520 [ 594.159087] do_one_initcall+0x53/0x260 [ 594.159092] kernel_init_freeable+0x18a/0x2f0 [ 594.159099] kernel_init+0x11/0x1a0 [ 594.159105] ret_from_fork+0x29/0x50 [ 594.159110] -> #3 (acpi_device_lock){+.+.}-{3:3}: [ 594.159117] __mutex_lock+0x95/0xd10 [ 594.159122] acpi_enable_wakeup_device_power+0x30/0x120 [ 594.159130] __acpi_device_wakeup_enable+0x34/0x110 [ 594.159138] acpi_pm_set_device_wakeup+0x55/0x140 [ 594.159143] __pci_enable_wake+0x56/0xb0 [ 594.159150] pci_finish_runtime_suspend+0x35/0x80 [ 594.159157] pci_pm_runtime_suspend+0xb5/0x1a0 [ 594.159162] __rpm_callback+0x3c/0x110 [ 594.159170] rpm_callback+0x58/0x70 [ 594.159176] rpm_suspend+0x15c/0x6f0 [ 594.159182] pm_runtime_work+0x9b/0xb0 [ 594.159188] process_one_work+0x263/0x520 [ 594.159195] worker_thread+0x4d/0x3b0 [ 594.159200] kthread+0xeb/0x120 [ 594.159206] ret_from_fork+0x29/0x50 [ 594.159211] -> #2 (acpi_wakeup_lock){+.+.}-{3:3}: [ 594.159218] __mutex_lock+0x95/0xd10 [ 594.159223] acpi_pm_set_device_wakeup+0x7a/0x140 [ 594.159228] __pci_enable_wake+0x77/0xb0 [ 594.159234] pci_pm_runtime_resume+0x70/0xd0 [ 594.159240] __rpm_callback+0x3c/0x110 [ 594.159246] rpm_callback+0x58/0x70 [ 594.159252] rpm_resume+0x50d/0x7a0 [ 594.159258] rpm_resume+0x267/0x7a0 [ 594.159264] __pm_runtime_resume+0x45/0x90 [ 594.159270] xe_pm_runtime_resume_and_get+0x12/0x50 [xe] [ 594.159314] xe_device_mem_access_get+0x97/0xc0 [xe] [ 594.159346] hw_engines+0x65/0xf0 [xe] [ 594.159380] seq_read_iter+0x10d/0x4b0 [ 594.159385] seq_read+0x9e/0xd0 [ 594.159390] full_proxy_read+0x4e/0x80 [ 594.159396] vfs_read+0xb6/0x310 [ 594.159401] ksys_read+0x60/0xe0 [ 594.159406] do_syscall_64+0x38/0x90 [ 594.159413] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 594.159419] -> #1 (&xe->mem_access.lock){+.+.}-{3:3}: [ 594.159427] xe_device_mem_access_get+0x43/0xc0 [xe] [ 594.159457] xe_gt_tlb_invalidation_vma+0x53/0x190 [xe] [ 594.159490] invalidation_fence_init+0x1d2/0x2c0 [xe] [ 594.159529] __xe_pt_unbind_vma+0x151/0x4e0 [xe] [ 594.159564] vm_bind_ioctl+0x48a/0xae0 [xe] [ 594.159602] async_op_work_func+0x20c/0x530 [xe] [ 594.159634] process_one_work+0x263/0x520 [ 594.159640] worker_thread+0x4d/0x3b0 [ 594.159646] kthread+0xeb/0x120 [ 594.159650] ret_from_fork+0x29/0x50 [ 594.159655] -> #0 (&vm->userptr.notifier_lock){++++}-{3:3}: [ 594.159663] __lock_acquire+0x16fa/0x2850 [ 594.159670] lock_acquire+0xd2/0x2e0 [ 594.159676] down_write+0x36/0xd0 [ 594.159681] vma_userptr_invalidate+0xeb/0x330 [xe] [ 594.159714] __mmu_notifier_invalidate_range_start+0x239/0x2a0 [ 594.159722] unmap_vmas+0x1ac/0x1c0 [ 594.159727] unmap_region+0xb5/0x120 [ 594.159732] do_vmi_align_munmap+0x2be/0x430 [ 594.159739] do_vmi_munmap+0xea/0x120 [ 594.159744] __vm_munmap+0x9c/0x160 [ 594.159750] __x64_sys_munmap+0x12/0x20 [ 594.159756] do_syscall_64+0x38/0x90 [ 594.159761] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 594.159768] other info that might help us debug this: [ 594.159773] Chain exists of: &vm->userptr.notifier_lock --> fs_reclaim --> mmu_notifier_invalidate_range_start [ 594.159785] Possible unsafe locking scenario: [ 594.159790] CPU0 CPU1 [ 594.159794] ---- ---- [ 594.159797] lock(mmu_notifier_invalidate_range_start); [ 594.159802] lock(fs_reclaim); [ 594.159808] lock(mmu_notifier_invalidate_range_start); [ 594.159814] lock(&vm->userptr.notifier_lock); [ 594.159819] The VM should be holding a mem_access.ref so this looks like it should be a false positive and we can just drop the explicit mem_access in xe_gt_tlb_invalidation(). The GGTT invalidation path also takes care to hold mem_access.ref so should be fine there also, and we already assert that we hold access.ref for the GuC communication underneath. Signed-off-by: -
Matthew Auld authored
Increase the sensitivity of the ggtt->lock by priming it against FS_RECLAIM, such that allocating memory while holding will result in lockdep splats. Signed-off-by:
-
Matthew Auld authored
The callers should already be holding the mem_access reference, before calling into this. Signed-off-by:
-
Matthew Auld authored
Only call access_put after dropping the forcewake. In theory the device could suspend, but really we want to start asserting that we have a mem_access.ref when touching mmio. Signed-off-by:
-
Matthew Auld authored
Any kind of device memory access should first ensure the device is not suspended, mmio included. Signed-off-by:
-
Matthew Auld authored
The mem_access is meant to cover any kind of device level memory access, mmio included. Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
Matthew Auld authored
We need keep the device awake when performing any kind of mmio operation. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/279Signed-off-by:
-
Matthew Auld authored
The xe_device_mem_access_get() should be all that's needed here and should now work as expected, without any strange races. In theory should be no functional changes here. Reported-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Matthew Auld authored
It looks like there is at least one race here, given that the pm_runtime_suspended() check looks to return false if we are in the process of suspending the device (RPM_SUSPENDING vs RPM_SUSPENDED). We later also do xe_pm_runtime_get_if_active(), but since the device is suspending or has now suspended, this doesn't do anything either. Following from this we can potentially return from xe_device_mem_access_get() with the device suspended or about to be, leading to broken behaviour. Attempt to fix this by always grabbing the runtime ref when our internal ref transitions from 0 -> 1. The hard part is then dealing with the runtime_pm callbacks also calling xe_device_mem_access_get() and deadlocking, which the pm_runtime_suspended() check prevented. v2: - ct->lock looks to be primed with fs_reclaim, so holding that and then allocating memory will cause lockdep to complain. Now that we unconditionally grab the mem_access.lock around mem_access_{get,put}, we need to change the ordering wrt to grabbing the ct->lock, since some of the runtime_pm routines can allocate memory (or at least that's what lockdep seems to suggest). Hopefully not a big deal. It might be that there were already issues with this, just that the atomics where "hiding" the potential issues. v3: - Use Thomas Hellström' idea with tracking the active task that is executing in the resume or suspend callback, in order to avoid recursive resume/suspend calls deadlocking on itself. - Split the ct->lock change. v4: - Add smb_mb() around accessing the pm_callback_task for extra safety. (Thomas Hellström) v5: - Clarify the kernel-doc for the mem_access.lock, given that it is quite strange in what it protects (data vs code). The real motivation is to aid lockdep. (Rodrigo Vivi) v6: - Split out the lock change. We still want this as a lockdep aid but only for the xe_device_mem_access_get() path. Sticking a lock on the put() looks be a no-go, also the runtime_put() there is always async. - Now that the lock is gone move to atomics and rely on the pm code serialising multiple callers on the 0 -> 1 transition. - g2h_worker_func() looks to be the next issue, given that suspend-resume callbacks are using CT, so try to handle that. v7: - Add xe_device_mem_access_get_if_ongoing(), and use it in g2h_worker_func(). v8 (Anshuman): - Just always grab the rpm, instead of just on the 0 -> 1 transition, which is a lot clearer and simplifies the code quite a bit. v9: - Make sure we also adjust the CT fast-path with if-active. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/258Signed-off-by: -
Anshuman Gupta authored
Don't init pcode and restore VRAM objects in vain. We can rely on primary GT GUC_STATUS to detect whether card has really lost power even when d3cold is allowed by xe. Adding d3cold.lost_power flag to avoid pcode init and vram restoration. Also cleaning up the TODO code comment. v2: - %s/xe_guc_has_lost_power()/xe_guc_in_reset(). - Used existing gt instead of new variable. [Rodrigo] - Added kernel-doc function comment. [Rodrigo] - xe_guc_in_reset() return true if failed to get fw. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Anshuman Gupta authored
Adding support to control d3cold by using vram_usages metric from ttm resource manager. When root port is capable of d3cold but xe has disallowed d3cold due to vram_usages above vram_d3ccold_threshol. It is required to disable d3cold to avoid any resume failure because root port can still transition to d3cold when all of pcie endpoints and {upstream, virtual} switch ports will transition to d3hot. Also cleaning up the TODO code comment. v2: - Modify d3cold.allowed in xe_pm_d3cold_allowed_toggle. [Riana] - Cond changed (total_vram_used_mb < xe->d3cold.vram_threshold) according to doc comment. v3: - Added enum instead of true/false argument in d3cold_toggle(). [Rodrigo] - Removed TODO comment. [Rodrigo] Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Badal Nilawar <badal.nilawar@intel.com> Acked-by:
-
Anshuman Gupta authored
Add per pci device vram_d3cold_threshold Sysfs to control the d3cold allowed knob. Adding a d3cold structure embedded in xe_device to encapsulate d3cold related stuff. v2: - Check total vram before initializing default threshold. [Riana] - Add static scope to vram_d3cold_threshold DEVICE_ATTR. [Riana] v3: - Fixed cosmetics review comment. [Riana] - Fixed CI Hook failures. - Used drmm_mutex_init(). v4: - Fixed kernel-doc warnings. v5: - Added doc explaining need for the device sysfs. [Rodrigo] - Removed TODO comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Riana Tauro <riana.tauro@intel.com> Acked-by:
-
Anshuman Gupta authored
Wrap xe_pm_runtime_init inside xe_pm_init. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Anshuman Gupta authored
Adding pci d3cold_capable check in order to initialize d3cold_allowed as false statically. It avoids vram save/restore latency during runtime suspend/resume v2: - Added else block to xe_pci_runtime_idle. [Rodrigo] Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Riana Tauro authored
Currently GuCRC is disabled in suspend path for xe. Rc6 is a prerequiste to enable s0ix and should not be disabled for s2idle. There is no requirement to disable GuCRC for S3+. Remove it from xe_guc_pc_stop, thus removing from suspend path. Retain the call in other places where xe_guc_pc_stop is called. v2: add description and return statement to kernel-doc (Rodrigo) v3: update commit message (Rodrigo) v4: add mem_access_get to the gucrc disable function Signed-off-by:
-
Francois Dugast authored
Reduce the number of warnings reported by checkpatch.pl from 118 to 48 by addressing those warnings types: LEADING_SPACE LINE_SPACING BRACES TRAILING_SEMICOLON CONSTANT_COMPARISON BLOCK_COMMENT_STYLE RETURN_VOID ONE_SEMICOLON SUSPECT_CODE_INDENT LINE_CONTINUATIONS UNNECESSARY_ELSE UNSPECIFIED_INT UNNECESSARY_INT MISORDERED_TYPE Signed-off-by:
-
Francois Dugast authored
Lower log level of XE_IOCTL_ERR macro to debug in order to prevent flooding kernel log. v2: Rename XE_IOCTL_ERR to XE_IOCTL_DBG (Rodrigo Vivi) v3: Rebase v4: Fix style, remove unrelated change about __FILE__ and __LINE__ Link: https://lists.freedesktop.org/archives/intel-xe/2023-May/004704.htmlSigned-off-by:
-
Francois Dugast authored
Fix minor issues: remove extra ';' and s/Initialise/Initialize/. Signed-off-by:
-
Francois Dugast authored
Remove some style issues of type COMPLEX_MACRO reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove all existing style issues of type TRAILING_WHITESPACE reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove all existing style issues of type CODE_INDENT reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove all existing style issues of type POINTER_LOCATION reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove almost all existing style issues of type OPEN_BRACE reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove almost all existing style issues of type SPACING reported by checkpatch. Signed-off-by:
-
Brian Welty authored
We need to hold vm->lock before the xe_vm_is_closed_or_banned(). Else we get this splat: [ 802.555227] ------------[ cut here ]------------ [ 802.555234] WARNING: CPU: 33 PID: 3122 at drivers/gpu/drm/xe/xe_vm.h:60 [ 802.555515] CPU: 33 PID: 3122 Comm: xe_exec_fault_m Tainted: ... [ 802.555709] Call Trace: [ 802.555714] <TASK> [ 802.555720] ? __warn+0x81/0x170 [ 802.555737] ? xe_vm_madvise_ioctl+0x2de/0x440 [xe] Fixes: 9d858b69 ("drm/xe: Ban a VM if rebind worker hits an error") Reviewed-by:
Brian Welty <brian.welty@intel.com> Signed-off-by:
-
Brian Welty authored
It was missed that print_op needs to include DRM_GPUVA_OP_PREFETCH. Else we hit the impossible BUG_ON: [ 886.371040] ------------[ cut here ]------------ [ 886.371047] kernel BUG at drivers/gpu/drm/xe/xe_vm.c:2234! [ 886.371216] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 886.371229] CPU: 1 PID: 3132 Comm: xe_exec_fault_m [ 886.371257] RIP: 0010:vm_bind_ioctl_ops_create+0x45f/0x470 [xe] ... [ 886.371517] Call Trace: [ 886.371525] <TASK> [ 886.371531] ? __die_body+0x1a/0x60 [ 886.371546] ? die+0x38/0x60 [ 886.371557] ? do_trap+0x10a/0x120 [ 886.371568] ? vm_bind_ioctl_ops_create+0x45f/0x470 [xe] v2: add debug print for PREFETCH in print_op Fixes: b06d47be ("drm/xe: Port Xe to GPUVA") Reviewed-by:
-
